From f6e3c5bdecb2b816f862080d1b1fea6a09ada44c Mon Sep 17 00:00:00 2001 From: visa Date: Thu, 18 Feb 2021 16:18:04 +0000 Subject: [PATCH] Mention that U-Boot serial speed should be 115200. Initial diff from Janne Johansson --- distrib/notes/octeon/prep | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/distrib/notes/octeon/prep b/distrib/notes/octeon/prep index ee8dee551e4..8117358c9b2 100644 --- a/distrib/notes/octeon/prep +++ b/distrib/notes/octeon/prep @@ -1,4 +1,4 @@ -dnl $OpenBSD: prep,v 1.11 2020/07/05 22:27:48 tj Exp $ +dnl $OpenBSD: prep,v 1.12 2021/02/18 16:18:04 visa Exp $ By default MACHINE systems are shipped with a Linux (or proprietary) system installed on the CompactFlash card or USB drive. @@ -11,6 +11,12 @@ Unless you have removed or changed the Linux installation it will be booted automatically. If you are quick you can interrupt booting (while still in U-Boot) with ^C. +OpenBSD/MACHINE uses serial speed 115200. If this speed is not the default +on the device, you should adjust it by setting the baudrate U-Boot environment +variable (you also need to reconnect to the serial port using the new speed): + + # setenv baudrate 115200 + There are several ways to load an OpenBSD/MACHINE kernel (or ramdisk), over TFTP, from the internal CompactFlash or USB storage. -- 2.20.1