From 74a100a3a647477d4d077883ecbcdc9fb6545a53 Mon Sep 17 00:00:00 2001 From: jmc Date: Fri, 10 Apr 2015 07:06:30 +0000 Subject: [PATCH] everything else is gone, so remove the man pages too; --- share/man/man4/lmc.4 | 111 -------------------------------------- share/man/man4/san.4 | 124 ------------------------------------------- 2 files changed, 235 deletions(-) delete mode 100644 share/man/man4/lmc.4 delete mode 100644 share/man/man4/san.4 diff --git a/share/man/man4/lmc.4 b/share/man/man4/lmc.4 deleted file mode 100644 index 2792ddde3c9..00000000000 --- a/share/man/man4/lmc.4 +++ /dev/null @@ -1,111 +0,0 @@ -.\" $OpenBSD: lmc.4,v 1.27 2015/01/15 20:37:36 schwarze Exp $ -.\" -.\" Copyright (c) 1999 Chris Cappuccio -.\" -.\" All rights reserved. -.\" -.\" Redistribution and use in source and binary forms, with or without -.\" modification, are permitted provided that the following conditions -.\" are met: -.\" 1. Redistributions of source code must retain the above copyright -.\" notice, this list of conditions and the following disclaimer. -.\" 2. Redistributions in binary form must reproduce the above copyright -.\" notice, this list of conditions and the following disclaimer in the -.\" documentation and/or other materials provided with the distribution. -.\" -.\" THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY EXPRESS OR -.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -.\" IN NO EVENT SHALL THE DEVELOPERS BE LIABLE FOR ANY DIRECT, INDIRECT, -.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -.\" -.Dd $Mdocdate: January 15 2015 $ -.Dt LMC 4 -.Os -.Sh NAME -.Nm lmc -.Nd Lan Media Corporation SSI/T1/DS1/HSSI/DS3 card device -.Sh SYNOPSIS -.Cd "lmc* at pci?" -.Sh DESCRIPTION -The -.Nm -driver provides support for the Lan Media Corporation SSI, T1/DS1, HSSI, and DS3 -PCI WAN adapters based on the DEC 21140 Ethernet chip. -The adapters use a DEC 21140 Ethernet chip for the PCI bus interface. -Leaving the bus interface chip, the data path goes through a field programmable -gate array, where HDLC processing is accomplished. -Leaving the FPGA, there are FIFO buffers and the DS1, DS3, and V.35 drive -circuitry. -.Pp -The intent is to provide a synchronous serial link with HDLC framing at speeds -of up to 10Mbps (for the SSI card), 52Mbps (for the HSSI card), BNC connectors -for 45Mbps operation without a CSU/DSU (DS3 card), and an RJ45 jack for -T1/E1 operation without a CSU/DSU (T1/DS1 card). -.Pp -The card will automatically use HDLC framing and defaults to external clock -source. -For the DS1 and DS3 cards with built-in CSU/DSU functionality, -the clock source is always external (from CSU/DSU). -The ability to set cable length is not currently implemented. -.Pp -Using the -.Xr sppp 4 -driver, you can also use the ppp protocol. -In either case, the -.Nm -interface should be configured as a point-to-point -link. -.Sh DIAGNOSTICS -.Bl -diag -.It "lmc0: couldn't map interrupt" -A fatal initialization error has occurred. -.It "lmc0: couldn't establish interrupt" -A fatal initialization error has occurred. -.It "lmc0: enabling keepalive" -Cisco HDLC keepalive packets will be transmitted. -.It "lmc0: disabling keepalive" -Cisco HDLC keepalive packets will not be transmitted. -.It "lmc0: clock internal" -The card is using internal clocking for the line. -.It "lmc0: clock external" -The card is using external clocking for the line. -.It "lmc0: asserting DTR and RTS" -The card is sending DTR and RTS signals on the line. -.It "lmc0: deasserting DTR and RTS" -The card is not sending DTR and RTS signals on the line. -.It "lmc0: Abnormal interrupt" -The card received an incomplete request. -This may be a sign of a hardware fault. -.It "lmc0: tx_intr: failed to dequeue mbuf?!?" -Only available if compiled with LMC_DEBUG. -.It "lmc0: txput: tx not running" -Problem from tulip. -Only available if compiled with LMC_DEBUG. -.El -.Sh SEE ALSO -.Xr netintro 4 , -.Xr sppp 4 , -.Xr ifconfig 8 , -.Xr lmccontrol 8 -.Sh AUTHORS -.An -nosplit -The -.Nm -device driver was written by -.An Michael Graff , -and was derived in part from -.An Matt Thomas Ns ' -.Xr de 4 -driver. -The -.Ox -port and manual page are from -.An Chris Cappuccio . -Later enhancements to support the LMC1200 card are based on LMC's -Linux driver. diff --git a/share/man/man4/san.4 b/share/man/man4/san.4 deleted file mode 100644 index cdf8dace39c..00000000000 --- a/share/man/man4/san.4 +++ /dev/null @@ -1,124 +0,0 @@ -.\" $OpenBSD: san.4,v 1.10 2015/01/15 20:37:36 schwarze Exp $ -.\" -.\" Copyright (c) 2001-2004 Sangoma Technologies (SAN) -.\" All rights reserved. www.sangoma.com -.\" -.\"This code is written by Alex Feldman for SAN. -.\" -.\" Redistribution and use in source and binary forms, with or without -.\" modification, are permitted provided that the following conditions -.\" are met: -.\" 1. Redistributions of source code must retain the above copyright -.\" notice, this list of conditions and the following disclaimer. -.\" 2. Redistributions in binary form must reproduce the above -.\" copyright notice, this list of conditions and the following disclaimer -.\" in the documentation and/or other materials provided with the -.\" distribution. -.\" 3. Neither the name of Sangoma Technologies nor the names of its -.\" contributors may be used to endorse or promote products derived -.\" from this software without specific prior written permission. -.\" -.\" THIS SOFTWARE IS PROVIDED BY SANGOMA TECHNOLOGIES AND CONTRIBUTORS -.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED -.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -.\" PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS -.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF -.\" THE POSSIBILITY OF SUCH DAMAGE. -.\" -.\" -.Dd $Mdocdate: January 15 2015 $ -.Dt SAN 4 -.Os -.Sh NAME -.Nm san -.Nd Sangoma Technologies AFT T1/E1 network device -.Sh SYNOPSIS -.Cd "san* at pci?" -.Sh DESCRIPTION -The -.Nm -device driver supports the Sangoma Technologies Inc AFT Series Network -cards. -This includes the following models: -.Pp -.Bl -item -offset indent -compact -.It -Sangoma AFT A101 PCI -.It -Sangoma AFT A102 PCI -.El -.Pp -The following media types and options (as given to -.Xr ifconfig 8 ) -are supported: -.Bl -tag -width xxx -offset indent -.It Cm media No T1 -Configure Sangoma card for T1, B8ZS, ESF, all channels -(default). -.It Cm media No T1-AMI -Configure Sangoma card for T1, AMI, ESF, all channels. -.It Cm media No E1 -Configure Sangoma card for E1, HDB3, NCRC4, all channels. -.It Cm media No E1-AMI -Configure Sangoma card for E1, AMI, NCRC4, all channels. -.El -.Pp -If no media options are present, the -.Nm -driver places the card into default mode (T1, B8ZS, ESF, all channels). -.Pp -Use -.Xr ifconfig 8 -to change the timeslot range for this card. -The following format is supported: -.Bl -tag -width xxx -offset indent -.It Cm # ifconfig san0 timeslot all -Enable all channels for this card. -.It Cm # ifconfig san0 timeslot 1-10 -Enable channels 1-10 for this card. -.It Cm # ifconfig san0 timeslot 1-10.14-15.20 -Enable channels 1-10, 14-15 and 20 for this card. -.El -.Pp -If the timeslot option is not present, the -.Nm -driver configures the card to use all the channels. -.Sh DIAGNOSTICS -.Bl -diag -.It "san0: couldn't map memory" -A fatal initialization error has occurred. -.It "san0: No PCI memory allocated for CPU #B" -A fatal initialization error has occurred. -.It "san0: couldn't map interrupt" -A fatal initialization error has occurred. -.It "san0: IRQ not allocated" -A fatal initialization error has occurred. -.El -.Sh SEE ALSO -.Xr ifmedia 4 , -.Xr pci 4 , -.Xr hostname.if 5 , -.Xr ifconfig 8 -.Sh HISTORY -The -.Nm -device driver first appeared in -.Ox 3.6 . -.Sh AUTHORS -The -.Nm -device driver and this manual page were written by -.An Alex Feldman . -.Sh BUGS -There is no hardware documentation. -.Pp -There appears to be a memory corruption bug during device -initialization. -.Pp -Since Sangoma stopped supporting the driver, -it is unlikely that these bugs will be fixed. -- 2.20.1