From 542e93ede43e8722b231d32cc20943c1bde24efd Mon Sep 17 00:00:00 2001 From: deraadt Date: Mon, 8 Jan 1996 18:54:33 +0000 Subject: [PATCH] from ragge: Device driver for TS11/TSV05 tape devices. Written by Bertram Barth, based on TMSCP device driver. --- sys/arch/vax/uba/ts.c | 1566 ++++++++++++++++++++++++++++++++++++++ sys/arch/vax/uba/tsreg.h | 258 +++++++ 2 files changed, 1824 insertions(+) create mode 100644 sys/arch/vax/uba/ts.c create mode 100644 sys/arch/vax/uba/tsreg.h diff --git a/sys/arch/vax/uba/ts.c b/sys/arch/vax/uba/ts.c new file mode 100644 index 00000000000..3f5ac796775 --- /dev/null +++ b/sys/arch/vax/uba/ts.c @@ -0,0 +1,1566 @@ +/* $NetBSD: ts.c,v 1.1 1996/01/06 16:43:46 ragge Exp $ */ + +/*- + * Copyright (c) 1991 The Regents of the University of California. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Berkeley and its contributors. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#)tmscp.c 7.16 (Berkeley) 5/9/91 + */ + +/* + * sccsid = "@(#)tmscp.c 1.24 (ULTRIX) 1/21/86"; + */ + +/************************************************************************ + * * + * Licensed from Digital Equipment Corporation * + * Copyright (c) * + * Digital Equipment Corporation * + * Maynard, Massachusetts * + * 1985, 1986 * + * All rights reserved. * + * * + * The Information in this software is subject to change * + * without notice and should not be construed as a commitment * + * by Digital Equipment Corporation. Digital makes no * + * representations about the suitability of this software for * + * any purpose. It is supplied "As Is" without expressed or * + * implied warranty. * + * * + * If the Regents of the University of California or its * + * licensees modify the software in a manner creating * + * diriviative copyright rights, appropriate copyright * + * legends may be placed on the drivative work in addition * + * to that set forth above. * + * * + ************************************************************************ + +/* + * TSV05/TS05 device driver, written by Bertram Barth. + * + * should be TS11 compatible (untested) + */ + +#define NCMD 1 +#define NMSG 1 + +#if 0 +# define DEBUG +# define TRACE +#else +# undef DEBUG +# undef TRACE +#endif + +#define TS11_COMPAT /* don't use extended features provided by TS05 */ + +#ifdef NEED_18BIT +#define TS_UBAFLAGS UBA_NEED16 +#else +#define TS_UBAFLAGS 0 +#endif + +#define ENABLE_ESS +#define ENABLE_END + +#define ENABLE_EAI /* enable Attention-Interrupts */ +#undef ENABLE_EAI + +#define ENABLE_ERI /* Enable Release Buffer Interrupts */ +#undef ENABLE_ERI + +#ifdef DEBUG +int tsdebug = 1; +# define debug(x) if (tsdebug > 0) {DELAY(2000); printf x; DELAY(3000);} +# define debug10(x) if (tsdebug > 9) printf x +#else +# define debug(x) /* just ignore it */ +# define debug10(x) /* just ignore it */ +#endif + +#ifdef TRACE +int tstrace = 1; +# define trace(x) if (tstrace > 0) {DELAY(2000); printf x; DELAY(3000);} +#else +# define trace(x) /* just ignore it */ +#endif + +/* + * TODO: most :-) + * + * include uba-mapping into tsinit(); + * merge tsinit(), tsreset() and tsprobe(); + * complete tsintr(); + * add proper error/status messages + * make messages appear where they are intended to. + * check for termination-classes and appropriate actions. + * check if flags like CVC and ATTN should be used. + * look for correct handling of attentions. + * check for correct usage of retry-commands. + * ... + */ + + +#include "ts.h" + +#if NTS > 0 + + +#include "sys/param.h" +#include "sys/systm.h" +#include "sys/kernel.h" +#include "sys/buf.h" +#include "sys/conf.h" +#include "sys/errno.h" +#include "sys/file.h" +#include "sys/map.h" +#include "sys/syslog.h" +#include "sys/ioctl.h" +#include "sys/mtio.h" +#include "sys/uio.h" +#include "sys/proc.h" +#include "sys/tprintf.h" + +#include "machine/pte.h" +#include "machine/sid.h" +#include "machine/cpu.h" +#include "machine/mtpr.h" + +#include "vax/uba/ubareg.h" +#include "vax/uba/ubavar.h" + +#include "tsreg.h" + +int ts_match __P((struct device *, void *, void *)); +void ts_attach __P((struct device *, struct device *, void *)); +void tsstrategy __P((struct buf *)); + +struct cfdriver tscd = { + NULL, "ts", ts_match, ts_attach, DV_DULL, sizeof(struct device) +}; + +/* + * ts command packets and communication area (per controller) + */ +struct ts { + struct tsdevice *reg; /* address of i/o-registers */ + struct tscmd cmd; /* command packet(s) */ + struct tsmsg msg; /* message packet(s) */ +} ts[NTS]; + +/* + * Software status, per controller. + * also status per tape-unit, since only one unit per controller + * (thus we have no struct ts_info) + */ +struct ts_softc { + struct ts *sc_ts; /* Unibus address of uda struct */ + short sc_mapped; /* Unibus map allocated ? */ + int sc_ubainfo; /* Unibus mapping info */ + short sc_state; /* see below: ST_xxx */ + short sc_flags; /* see below: FL_xxx */ + short sc_lcmd; /* last command word */ + short sc_rtc; /* retry count for lcmd */ + short sc_lssr; /* last status register */ + short sc_lmsgh; /* last message header */ + short sc_lxst0; /* last status word */ + short sc_cmdf; /* command flags (ack,cvc,ie) */ + short sc_openf; /* lock against multiple opens */ + short sc_liowf; /* last operation was write */ + int sc_micro; /* microcode revision */ + int sc_ivec; /* interrupt vector address */ + short sc_ipl; /* interrupt priority, Q-bus */ + tpr_t sc_tpr; /* tprintf handle */ +} ts_softc[NTS]; + +#define ST_INVALID 0 /* uninitialized, before probe */ +#define ST_PROBE 1 /* during tsprobe(), not used */ +#define ST_SLAVE 2 /* in tsslave(), init almost complete */ +#define ST_ATTACH 3 /* during tsattach(), not used */ +#define ST_INITIALIZED 4 /* init completed, set by tsintr() */ +#define ST_RUNNING 5 +#define ST_IDLE 6 +#define ST_BUSY 7 + +/* Bits in minor device */ +#define TS_UNIT(dev) (minor(dev)&03) +#define TS_CTLR(dev) (TS_UNIT(dev)) +#define TS_HIDENSITY 010 + +#define TS_PRI LOG_INFO + +/* + * Definition of the driver for autoconf. + */ +#define CTLRNAME "zs" /* ts/zs ??? */ +#define UNITNAME "ts" + +struct uba_ctlr *zsinfo[NTS]; /* controller-info */ +struct uba_device *tsinfo[NTS]; /* unit(tape)-info */ + +int tsprobe(), tsslave(), tsattach(), tsdgo(), tsintr(); + +u_short tsstd[] = { 0172520, 0172524, /* standart csr for ts */ + 0172530, 0172534, 0 }; /* standart csr for ts */ + +struct uba_driver tsdriver = { tsprobe, tsslave, tsattach, 0, tsstd, + UNITNAME, tsinfo, CTLRNAME, zsinfo, 0 }; + +/* + * Since we don't have credits and thus only one operation per time, + * we don't have and don't need queues like MSCP/TMSCP use them. + * Per controller we only need one internal buffer for ioctls and + * two pointers to buffers to simulate similiar behaviour ... + */ +struct buf ts_cbuf[NTS]; /* internal cmd buffer (for ioctls) */ +struct buf *ts_wtab[NTS]; /* dummy I/O wait queue */ +#define b_ubinfo b_resid /* Unibus mapping info, per buffer */ + +/*----------------------------------------------------------------------*/ + +/* + * Initialize a TS device. Set up UBA mapping registers, + * initialize data structures, what else ??? + */ +int +tsinit (unit) + int unit; +{ + register struct ts_softc *sc; + volatile struct tsdevice *tsregs; + struct uba_ctlr *um; + + trace (("tsinit: unit = %d\n", unit)); + + sc = &ts_softc[unit]; + um = zsinfo[unit]; + um->um_tab.b_active++; /* ??? */ + tsregs = (struct tsdevice *)um->um_addr; + if (sc->sc_mapped == 0) { + /* + * Map the communications area and command and message + * buffer into Unibus address space. + */ + sc->sc_ubainfo = uballoc (um->um_ubanum, (caddr_t)&ts[unit], + sizeof (struct ts), TS_UBAFLAGS); + sc->sc_ts = (struct ts *)(UBAI_ADDR(sc->sc_ubainfo)); + sc->sc_mapped = 1; + debug (("sc_mapped: %d [%x, %x]\n", sc->sc_mapped, + sc->sc_ubainfo, sc->sc_ts)); + } + + /* + * bertram: start hardware initialization ?????? + */ + + /* tsreset(unit); */ + + return (1); +} + +/* + * send a command using the default command-buffer for this unit/controller. + * If a command-word is given, then assemble a one-word command. + * other words in command-buffer are unchanged and must thus be initialized + * before calling this function. + */ +int +tsexec (ctlr, cmd) + int ctlr; + int cmd; +{ + register struct ts_softc *sc = &ts_softc[ctlr]; + register struct tscmd *tscmdp = &ts[ctlr].cmd; + register long tscmdma = (long)&sc->sc_ts->cmd; /* mapped address */ + volatile struct tsdevice *tsreg = ts[ctlr].reg; + volatile char *dbx = ((char*)tsreg) + 3; + volatile short sr; + char *cmdName; + + sc->sc_cmdf |= TS_CF_ACK | TS_CF_IE; + tscmdp->cmdr = sc->sc_cmdf | cmd; + tscmdp->cmdr = TS_CF_ACK | TS_CF_IE | sc->sc_cmdf | cmd; + sc->sc_cmdf = 0; /* XXX */ + +#ifdef DEBUG + switch (tscmdp->cmdr & TS_CF_CMASK) { + case TS_CMD_RNF: cmdName = "Read Next (Forward)"; break; + case TS_CMD_RPR: cmdName = "Read Previous (Reverse)"; break; + case TS_CMD_WCHAR: cmdName = "Write Characteristics"; break; + case TS_CMD_WD: cmdName = "Write Data (Next)"; break; + case TS_CMD_WDR: cmdName = "Write Data (Retry)"; break; + case TS_CMD_SRF: cmdName = "Space Records Forward"; break; + case TS_CMD_SRR: cmdName = "Space Records Reverse"; break; + case TS_CMD_STMF: cmdName = "Skip Tape Marks Forward"; break; + case TS_CMD_STMR: cmdName = "Skip Tape Marks Reverse"; break; + case TS_CMD_RWND: cmdName = "Rewind"; break; + case TS_CMD_WTM: cmdName = "Write Tape Mark"; break; + case TS_CMD_WTMR: cmdName = "Write Tape Mark (Retry)"; break; + case TS_CMD_STAT: cmdName = "Get Status (END)"; break; + default: cmdName = "unexptected Command"; break; + } + debug (("tsexec: cmd = 0x%x (%s)\n", tscmdp->cmdr, cmdName)); +#endif + + sr = tsreg->tssr; + if ((sr & TS_SSR) == 0) { /* subsystem NOT ready */ + printf ("%s%d: subsystem not ready [%x]\n", + CTLRNAME, ctlr, sr); + return (-1); + } + dbx = ((char*)tsreg) + 3; /* dbx is located at the fourth byte */ + *dbx = (tscmdma >> 18) & 0x0F; /* load bits 18-21 into dbx */ + + /* possible race-condition with ATTN !!! */ + + sr = tsreg->tssr; + if ((sr & TS_RMR) != 0) { /* Register modification Refused */ + printf ("ts: error writing TSDBX\n"); + return (-1); + } + /* now load bits 15-2 at pos 15-2 and bits 17,16 at pos 1,0 of TSDB */ + tsreg->tsdb = (tscmdma & 0xfffc) | ((tscmdma >> 16) & 0x03); + + /* + * wait for SSR or RMR to show up + */ + sr = tsreg->tssr; + if ((sr & TS_SSR) != 0) { /* something went wrong .. */ + if (sr & TS_RMR) { + printf ("ts: error writing TSDB (RMR)\n"); + return (-1); + } + if (sr & TS_NXM) { + printf ("ts: error writing TSDB (NXM)\n"); + return (-1); + } + printf ("ts: error 0x%x while writing TSDB\n", sr); + tsstatus (sr); + return (-1); + } + + return (0); /* completed successfully */ +} + +/* + * Execute a (ioctl) command on the tape drive a specified number of times. + * This routine sets up a buffer and calls the strategy routine which + * issues the command to the controller. + */ +int +tscommand (dev, cmd, count) + register dev_t dev; + int cmd; + int count; +{ + register struct buf *bp; + register int s; + + trace (("tscommand (%d, %x, %d)\n", TS_UNIT(dev), cmd, count)); + + s = splbio(); + bp = &ts_cbuf[TS_UNIT(dev)]; +#if 1 + while (bp->b_flags & B_BUSY) { + debug (("looping 'cause B_BUSY\n")); + /* + * This special check is because B_BUSY never + * gets cleared in the non-waiting rewind case. ??? + */ + if (bp->b_bcount == 0 && (bp->b_flags & B_DONE)) + break; + bp->b_flags |= B_WANTED; + debug (("sleeping ...\n"));; + sleep ((caddr_t)bp, PRIBIO); + /* check MOT-flag !!! */ + } + bp->b_flags = B_BUSY | B_READ; +#endif + splx(s); + + /* + * Load the buffer. The b_count field gets used to hold the command + * count. the b_resid field gets used to hold the command mneumonic. + * These 2 fields are "known" to be "safe" to use for this purpose. + * (Most other drivers also use these fields in this way.) + */ + bp->b_dev = dev; + bp->b_bcount = count; + bp->b_resid = cmd; + bp->b_blkno = 0; + debug (("tscommand: calling tsstrategy ...\n")); + tsstrategy (bp); + /* + * In case of rewind from close, don't wait. + * This is the only case where count can be 0. + */ + if (count == 0) { + debug (("tscommand: direct return, no iowait.\n")); + return; + } + debug (("tscommand: calling iowait ...\n"));; + iowait (bp); + if (bp->b_flags & B_WANTED) + wakeup ((caddr_t)bp); + bp->b_flags &= B_ERROR; +} + +/* + * Start an I/O operation on TS05 controller + */ +int +tsstart (um, bp) + register struct uba_ctlr *um; + register struct buf *bp; +{ + register struct ts_softc *sc = &ts_softc[um->um_ctlr]; + volatile struct tsdevice *tsreg = ts[um->um_ctlr].reg; + register struct tscmd *tscmdp = &ts[um->um_ctlr].cmd; + register struct buf *dp; + register struct ts *tp; + volatile int i, itmp; + int unit; + int ioctl; + int cmd; + + unit = um->um_ctlr; + trace (("tsstart (unit = %d)\n", unit)); + sc = &ts_softc[unit]; + + if ((dp = ts_wtab[unit]) != NULL) { + /* + * There's already a command pending ... + * Either we are called by tsintr or we have missed + * something important (race condition). + */ + debug (("tsstart: I/O queue not empty.\n")); + + /* bertram: ubarelse ??? */ + ts_wtab[um->um_ctlr] = NULL; + dp->b_flags |= B_ERROR; + iodone (dp); + + if (tsreg->tssr & TS_SC) { /* Special Condition; Error */ + tprintf (sc->sc_tpr, "%s%d: error at bn%d\n", + UNITNAME, unit, dp->b_blkno); + log (TS_PRI, "%s%d: tssr 0x%x, state %d\n", + CTLRNAME, unit, tsreg->tssr, sc->sc_state); + tsinit (unit); + return (-1); + } + /* XXX */ + } + + /* + * Check if command is an ioctl or not (ie. read or write). + * If it's an ioctl then just set the flags for later use; + * For other commands attempt to setup a buffer pointer. + */ + if (bp == &ts_cbuf[um->um_ctlr]) { + ioctl = 1; + debug (("tsstart(ioctl): unit %d\n", um->um_ctlr)); + } else { + ioctl = 0; + debug (("tsstart(rw): unit %d\n", um->um_ctlr)); + + /* + * now we try to map the buffer into uba map space (???) + */ + i = TS_UBAFLAGS; + switch (cpunumber) { + case VAX_8600: + case VAX_780: + i |= UBA_CANTWAIT; + break; + case VAX_750: + i |= um->um_ubinfo | UBA_CANTWAIT; + break; + case VAX_730: + case VAX_78032: + i |= UBA_CANTWAIT; + break; + default: + printf ("unsupported cpu %d in tsstart.\n", cpunumber); + } /* end switch (cpunumber) */ + + debug (("ubasetup (%x, %x, %x)\n", um->um_ubanum, bp, i)); + if ((i = ubasetup (um->um_ubanum, bp, i)) == 0) { + /* + * For some reasons which I don't (yet? :) understand, + * tmscp.c initiates in this situation a GET-UNIT + * command. (Because no data-buffers are neccess. ??) + */ + debug (("tsstart: %d, ubasetup = 0\n", um->um_ctlr)); + cmd = TS_CMD_STAT; + goto do_cmd; + return (-1); /* ??? */ + } +#if defined(VAX750) + if (cpunumber == VAX_750) + itmp = i & 0xfffffff; /* mask off bdp */ + else +#endif + itmp = i; + + /* XXX */ + } + debug (("ubasetup done. [%x, %x, %d]\n", i, itmp, ioctl)); + + /* + * If it's an ioctl command, then assemble the command. + * The "b_resid" field holds the command-number as defined + * in + */ + if (ioctl) { + debug (("tsstart: doing ioctl %d\n", bp->b_resid)); + switch ((int)bp->b_resid) { + case MTWEOF: + cmd = TS_CMD_WTM; + break; + case MTFSF: + cmd = TS_CMD_STMF; + tscmdp->cw1 = bp->b_bcount; + break; + case MTBSF: + cmd = TS_CMD_STMR; + tscmdp->cw1 = bp->b_bcount; + break; + case MTFSR: + cmd = TS_CMD_SRF; + tscmdp->cw1 = bp->b_bcount; + break; + case MTBSR: + cmd = TS_CMD_SRR; + tscmdp->cw1 = bp->b_bcount; + break; + case MTREW: + cmd = TS_CMD_RWND; +#ifndef TS11_COMPAT + if (bp->b_bcount == 0) { + cmd = TS_CMD_RWII; + } +#endif + break; + case MTOFFL: + cmd = TS_CMD_RWUL; + break; + case MTNOP: + cmd = TS_CMD_STAT; + break; + default: + printf ("%s%d: bad ioctl %d\n", + CTLRNAME, unit, bp->b_resid); + /* Need a no-op. get status */ + cmd = TS_CMD_STAT; + } /* end switch (bp->b_resid) */ + } else { /* Its a read/write command (not an ioctl) */ + debug (("tsstart: non-ioctl [%x, %xi, %x]\n", + tscmdp, UBAI_ADDR(i), bp)); + tscmdp->cw1 = UBAI_ADDR(i) & 0xffff; + tscmdp->cw2 = (UBAI_ADDR(i) >> 16) & 0x3f; + tscmdp->cw3 = bp->b_bcount; + + if (bp->b_flags & B_READ) { + debug (("read-command(%d)\n", tscmdp->cw3)); + cmd = TS_CMD_RNF; + } + else { + debug (("write-command(%d)\n", tscmdp->cw3)); + cmd = TS_CMD_WD; + } + bp->b_ubinfo = itmp; /* save mapping info */ + } + + /* + * Move buffer to I/O wait pseudo-queue + */ + if (ts_wtab[um->um_ctlr]) { + /* + * we are already waiting for something ... + * this should not happen, so we have a problem now. + * bertram: set error-flag and call iodone() ??? + */ + debug (("tsstart: already waiting for something ...\n")); + } + ts_wtab[um->um_ctlr] = bp; + + /* + * Now that the command-buffer is setup, give it to the controller + */ +do_cmd: + debug (("tsstart: calling tsexec(%d, %d)\n", unit, cmd)); + return (tsexec (unit, cmd)); +} + +/* + * initialize the controller by sending WRITE CHARACTERISTICS command. + * contents of command- and message-buffer are assembled during this + * function. + */ +int +tswchar (ctlr) + int ctlr; +{ + register struct ts_softc *sc = &ts_softc[ctlr]; + volatile struct tsdevice *tsregs = ts[ctlr].reg; + volatile struct tscmd *tscmdp = &ts[ctlr].cmd; + volatile struct tsmsg *tsmsgp = &ts[ctlr].msg; + volatile unsigned int sr, ma, timeout; + + /* + * assemble and send "WRITE CHARACTERISTICS" command + */ + ma = (long)tsmsgp; + if (ma & 0x7FC00001) { /* address must be even and 22-bit */ + printf ("invalid address 0x%0x for msg-buffer.\n", ma); + return (-1); + } + + tsmsgp->hdr = ma & 0xFFFF; /* low order addr. bits */ + tsmsgp->dfl = (ma >> 16) & 0x003F; /* high order addr. bits */ + tsmsgp->rbpcr = 16; /* size of message-buffer */ + tsmsgp->xst0 = 0; /* chacacteristics mode word */ + tsmsgp->xst1 = 0; /* control word (ext.feat.) */ + +#ifdef TS11_COMPAT + tsmsgp->rbpcr = 14; /* size of message-buffer */ + tsmsgp->xst0 = 0; /* chacacteristics mode word */ + tsmsgp->xst1 = 0; /* control word (ext.feat.) */ +#else + tsmsgp->rbpcr = 16; /* size of extended message buffer */ + tsmsgp->xst0 = 0; /* chacacteristics mode word */ + tsmsgp->xst1 = 0; /* unit-select */ + tsmsgp->xst1 |= TS_WC_HSP; /* high speed */ +#endif + +#ifdef ENABLE_ESS + tsmsgp->xst0 |= TS_WC_ESS; +#ifdef ENABLE_ENB + tsmsgp->xst0 |= TS_WC_ENB; +#endif +#endif + +#ifdef ENABLE_EAI + tsmsgp->xst0 |= TS_WC_EAI; +#ifdef ENABLE_ERI + tsmsgp->xst0 |= TS_WC_ERI; +#endif +#endif + + tscmdp->cmdr = TS_CF_ACK | TS_CF_IE | TS_CMD_WCHAR; /* obsolete */ + tscmdp->cw1 = ma & 0xFFFF; + tscmdp->cw2 = (ma >> 16) & 0x003F; + tscmdp->cw3 = 10; /* size of charact.-data */ + + if (tsexec (ctlr, TS_CMD_WCHAR) < 0) { + printf ("%s%d: write characteristics command failed [%x]\n", + CTLRNAME, ctlr, tsregs->tssr); + return (-1); + } + + timeout = 1000; /* timeout in 10 seconds */ + do { + DELAY(10000); + sr = tsregs->tssr; + debug10 (("\ttssr: 0x%x\n", sr)); + if (timeout-- > 0) { + printf ("timeout during initialize."); + tsstatus (sr); + return (-1); + } + } while ((sr & TS_SSR) == 0); + tsstatus (sr); + + return (0); +} + +/* + * + */ +int +tsreset (ctlr) + int ctlr; +{ + register struct ts_softc *sc = &ts_softc[ctlr]; + volatile struct tsdevice *tsreg = ts[ctlr].reg; + volatile unsigned int sr, timeout; + + trace (("tsreset (%d)\n", ctlr)); + + /* + * reset ctlr by writing into TSSR, then write characteristics + */ + timeout = 1000; /* timeout in 10 seconds */ + tsreg->tssr = 0; /* start initialization */ + do { + DELAY(10000); + sr = tsreg->tssr; + debug10 (("\ttssr: 0x%x\n", sr)); + if (timeout-- > 0) { + if (sr != 0) + printf ("%s%d: timeout waiting for TS_SSR\n", + CTLRNAME, ctlr); + tsstatus (sr); + return (-1); + } + } while ((sr & TS_SSR) == 0); /* wait until subsystem ready */ + tsstatus (sr); + + return (tswchar (ctlr)); +} + +extern struct cfdriver ubacd; +/* + * probe for device. If found, try to raise an interrupt. + */ +int +tsprobe (reg, ctlr, um) + caddr_t reg; /* address of TSDB register */ + int ctlr; /* index of the controller */ + struct uba_ctlr *um; /* controller-info */ +{ + register struct ts_softc *sc; + register struct tsdevice *tsregs = (struct tsdevice*) reg; + volatile unsigned int sr, timeout, count; + struct uba_softc *ubasc; + + trace (("tsprobe (%x, %d, %x)\n", reg, ctlr, um)); + + ts_wtab[ctlr] = NULL; + sc = &ts_softc[ctlr]; + sc->sc_ts = &ts[ctlr]; + sc->sc_state = ST_PROBE; + sc->sc_flags = 0; + zsinfo[ctlr] = um; + ts[ctlr].reg = (struct tsdevice*) reg; + + /* + * Set host-settable interrupt vector. + * Assign 0 to the TSSR register to start the ts-device initialization. + * The device is not really initialized at this point, this is just to + * find out if the device exists. + */ + ubasc = ubacd.cd_devs[0]; /* XXX */ + sc->sc_ivec = (ubasc->uh_lastiv -= 4); + + count = 0; +again: + timeout = 1000; /* timeout in 10 seconds */ + tsregs->tssr = 0; /* start initialization */ + do { + DELAY(10000); + sr = tsregs->tssr; + debug10 (("\ttssr-1: 0x%x\n", sr)); + if (timeout-- > 0) { + if (sr != 0) /* the device exists !!! */ + printf ("%s%d: timeout waiting for TS_SSR\n", + CTLRNAME, ctlr); + tsstatus (sr); + goto bad; + } + } while ((sr & TS_SSR) == 0); /* wait until subsystem ready */ + tsstatus (sr); + + tswchar (ctlr); /* write charact. to enable interrupts */ + /* completion of this will raise the intr. */ + +#ifdef notyet + sc->sc_ipl = br = qbgetpri(); +#else + sc->sc_ipl = 0x15; +#endif + return (sizeof (struct tsdevice)); + +bad: if (++count < 3) + goto again; + +#ifdef notyet + splx(s); +#endif + return (0); +} + + +/* + * Try to find a slave (a drive) on the controller. + * Since there's only one drive per controller there's nothing to do. + * (we could check the status of the drive (online/offline/...) + */ +int +tsslave (ui, reg) + struct uba_device *ui; /* ptr to the uba device structure */ + caddr_t reg; /* addr of the device controller */ +{ + register int ctlr = ui->ui_ctlr; + register struct ts_softc *sc = &ts_softc[ctlr]; + register struct tsmsg *tsmsgp = &ts[ctlr].msg; + + trace (("tsslave (%x, %x)\n", ui, reg)); + + /* + * write the characteristics (again) + * This will raise an interrupt during ST_SLAVE which indicates + * completion of initialization ... + */ + sc->sc_state = ST_SLAVE; /* tsintr() checks this ... */ + if (tswchar (ctlr) < 0) { + printf ("%s%d: cannot initialize", CTLRNAME, ctlr); + return (0); /* ??? XXX ??? */ + } + sc->sc_micro = (tsmsgp->xst2 & TS_SF_MCRL) >> 2; + printf ("%s%d: rev %d, extended features %s, transport %s\n", + CTLRNAME, ctlr, sc->sc_micro, + (tsmsgp->xst2 & TS_SF_EFES ? "enabled" : "disabled"), + (ts[ctlr].reg->tssr & TS_OFL ? "offline" : "online")); + + tsinit (ctlr); /* must be called once, why not here ? */ + + return (1); +} + + +/* + * Open routine will issue the online command, later. + * Just reset the flags and do nothing ... + */ +int +tsattach (ui) + register struct uba_device *ui; +{ + trace (("\ntsattach (%x)", ui)); + ui->ui_flags = 0; /* mark unit offline */ + return (0); +} + + +/* + * TSV05/TS05 interrupt routine + */ +int +tsintr(ctlr) +{ + register struct ts_softc *sc = &ts_softc[ctlr]; + register struct tsmsg *tsmsgp = &ts[ctlr].msg; + register struct tscmd *tscmdp = &ts[ctlr].cmd; + volatile struct tsdevice *tsreg = ts[ctlr].reg; + volatile struct uba_ctlr *um = zsinfo[ctlr]; + register struct buf *bp; + + unsigned short sr = tsreg->tssr; /* save TSSR */ + unsigned short mh = tsmsgp->hdr; /* and msg-header */ + /* clear the message header ??? */ + + short cmode = tscmdp->cmdr & TS_CF_CMODE; + short ccode = tscmdp->cmdr & TS_CF_CCODE; + short cmask = tscmdp->cmdr & TS_CF_CMASK; + short error = 0; + +#ifdef DEBUG + printf ("TSSR: %b, MSG: %x ", sr, TS_TSSR_BITS, mh); + switch (tsmsgp->hdr & 0x001F) { + case 16: printf ("(End)"); break; + case 17: printf ("(Fail)"); break; + case 18: printf ("(Error)"); break; + case 19: printf ("(Attention)"); break; + } +#endif + + trace ((" tsintr (%d, %d, %d, %x)\n", uba, vector, level, ctlr)); + + if (tsmsgp->xst0 & TS_SF_VCK) + sc->sc_cmdf |= TS_CF_CVC; + +#ifdef QBA /* copied from uda.c */ + if(cpunumber == VAX_78032) + splx(sc->sc_ipl); /* Qbus interrupt protocol is odd */ +#endif + + /* + * There are two different things which can (and should) be checked: + * the actual (internal) state and the device's result (tssr/msg.hdr) + * + * For each state there's only one "normal" interrupt. Anything else + * has to be checked more intensively. Thus in a first run according + * to the internal state the expected interrupt is checked/handled. + * + * In a second run the remaining (not yet handled) interrupts are + * checked according to the drive's result. + */ + switch (sc->sc_state) { + + case ST_INVALID: + /* + * Ignore unsolicited interrupts. + */ + debug (("%s%d: intr in state ST_INVALID [%x,%x]\n", + CTLRNAME, ctlr, sr, mh)); + log (LOG_WARNING, "%s%d: stray intr [%x,%x]\n", + CTLRNAME, ctlr, sr, mh); + return; + + case ST_SLAVE: + /* + * this interrupt was caused by write-charact. command + * issued by tsslave() and indicates the end of the + * initialization phase. Just ignore it ... + */ + debug (("%s%d: intr in state ST_SLAVE [%x,%x]\n", + CTLRNAME, ctlr, sr, mh)); + if ((sr & TS_SC) != 0 || (sr & TS_TC) != TS_TC_NORM) { + printf ("%s%d: problem during init [%x,%x]\n", + CTLRNAME, ctlr, sr, mh); + /* return here ??? */ + /* break and check the error outside switch ??? */ + break; + } + sc->sc_state = ST_RUNNING; + return; + + + case ST_RUNNING: + /* + * Here we expect interrupts indicating the end of + * commands or indicating problems. + */ + debug (("%s%d: intr ST_RUN (%s) [%x,%x]\n", + CTLRNAME, ctlr, ((tsmsgp->xst0 & TS_SF_ONL) ? + "online" : "offline"), sr, mh)); + /* + * Anything else is handled outside this switch ... + */ + break; + + case ST_IDLE: + debug (("%s%d: intr ST_IDLE [%x,%x]\n", + CTLRNAME, ctlr, sr, mh)); + break; + + + default: + printf ("%s%d: unexpected interrupt during state %d [%x,%x]\n", + CTLRNAME, ctlr, sc->sc_state, sr, mh); + return; + } + + /* + * now we check the termination class. + */ + switch (sr & TS_TC) { + + case TS_TC_NORM: + /* + * Normal termination -- The operation is completed + * witout incident. + */ + debug (("%s%d: Normal Termination\n", CTLRNAME, ctlr)); + sc->sc_state = ST_IDLE; /* XXX ??? */ + sc->sc_state = ST_RUNNING; + sc->sc_liowf = (ccode == TS_CC_WRITE); + sc->sc_rtc = 0; + if ((bp = ts_wtab[ctlr]) != NULL) { + ts_wtab[ctlr] = NULL; /* pseudo-unlink */ + + if (bp != &ts_cbuf[ctlr]) { /* no ioctl */ + debug (("ubarelse\n")); + ubarelse (um->um_ubanum, (int *)&bp->b_ubinfo); +#if defined(VAX750) + if (cpunumber == VAX_750 && um->um_ubinfo != 0) + ubarelse(um->um_ubanum, &um->um_ubinfo); + /* XXX */ +#endif + } + bp->b_resid = tsmsgp->rbpcr; + debug (("tsintr: iodone(NORM) [%d,%d,%d]\n", + bp->b_resid, bp->b_bcount, tsmsgp->rbpcr)); + iodone (bp); /* bertram: ioctl ??? */ + } + return; + + case TS_TC_ATTN: + /* + * Attention condition -- this code indicates that the + * drive has undergone a status change, such as going + * off-line or coming on-line. + * (Without EAI enabled, no Attention interrupts occur. + * drive status changes are signaled by the VCK flag.) + */ + debug (("%s%d: Attention\n", CTLRNAME, ctlr)); + return; + + case TS_TC_TSA: + /* + * Tape Status Alert -- A status condition is encountered + * that may have significance to the program. Bits of + * interest in the extended status registers include + * TMK, EOT and RLL. + */ + debug (("Tape Status Alert\n")); + tsxstatus (tsmsgp); + if (tsmsgp->xst0 & TS_SF_TMK) { + debug (("Tape Mark detected")); + } + if (tsmsgp->xst0 & TS_SF_EOT) { + debug (("End of Tape")); + } + break; + + case TS_TC_FR: + /* + * Function Reject -- The specified function was not + * initiated. Bits of interest include OFL, VCK, BOT, + * WLE, ILC and ILA. + */ + debug (("Function reject\n")); + tsxstatus (tsmsgp); + if (sr & TS_OFL) { + printf ("tape is off-line.\n"); + break; + } + if (tsmsgp->xst0 & TS_SF_VCK) { + printf ("Volume check: repeating command ...\n"); + tsexec (ctlr, tscmdp->cmdr); + return; + } + if (tsmsgp->xst0 & TS_SF_BOT) { + printf ("bottom of tape.\n"); + } + if (tsmsgp->xst0 & TS_SF_WLE) { + printf ("Write Lock Error\n"); + } + break; + + case TS_TC_TPD: + /* + * Recoverable Error -- Tape position is a record beyond + * what its position was when the function was initiated. + * Suggested recovery procedure is to log the error and + * issue the appropriate retry command. + */ + debug (("Tape position down\n")); + switch (cmask) { + case TS_CMD_RNF: /* Read Next (forward) */ + debug (("retry read forward ...\n")); + sc->sc_rtc = 1; + tsexec (ctlr, TS_CMD_RPF); + return; + case TS_CMD_RPR: /* Read Previous (Reverse) */ + debug (("retry read reverse ...\n")); + sc->sc_rtc = 1; + tsexec (ctlr, TS_CMD_RNR); + return; + case TS_CMD_WD: /* Write Data (Next) */ + debug (("retry write data ...\n")); + sc->sc_rtc = 1; + tsexec (ctlr, TS_CMD_WDR); + return; + case TS_CMD_WTM: + debug (("retry write tape mark ...\n")); + sc->sc_rtc = 1; + tsexec (ctlr, TS_CMD_WTMR); + return; + default: + debug (("TPD in command %x\n", cmask)); + } + break; + + case TS_TC_TNM: + /* + * Recoverable Error -- Tape position has not changed. + * Suggested recovery procedure is to log the error and + * reissue the original command. + */ + printf ("Tape not moved\n"); + if (sc->sc_rtc < 3) { + sc->sc_rtc++; + /* bertram: log the error !!! */ + printf ("retrying command %x (%d)\n", + tscmdp->cmdr, sc->sc_rtc); + tsexec (ctlr, tscmdp->cmdr); + return; + } + break; + + case TS_TC_TPL: + /* + * Unrecoverable Error -- Tape position has been lost. + * No valid recovery procedures exist unless the tape + * has labels or sequence numbers. + */ + printf ("Tape position lost\n"); + break; + + case TS_TC_FCE: + /* + * Fatal subsytem Error -- The subsytem is incapable + * of properly performing commands, or at least its + * integrity is seriously questionable. Refer to the + * fatal class code field in the TSSR register for + * additional information on the type of fatal error. + */ + printf ("Fatal Controller Error\n"); + + default: + printf ("%s%d: error 0x%x, resetting controller\n", + CTLRNAME, ctlr, sr & TS_TC); + tsreset (ctlr); + } + + /* + * reset controller ?? call tsinit() ??? + */ + if ((bp = ts_wtab[ctlr]) != NULL) { + ts_wtab[ctlr] = NULL; /* pseudo unlink */ + + if (bp != &ts_cbuf[ctlr]) { /* no ioctl */ + debug (("ubarelse-2\n")); + ubarelse(um->um_ubanum, (int *)&bp->b_ubinfo); + } + if ((sr & TS_TC) != TS_TC_NORM) { + bp->b_flags |= B_ERROR; + debug (("tsintr: bp->b_flags |= B_ERROR\n")); + } + debug (("resid:%d, count:%d, rbpcr:%d\n", + bp->b_resid, bp->b_bcount, tsmsgp->rbpcr)); + bp->b_resid = tsmsgp->rbpcr; /* XXX */ + debug (("tsintr: iodone(%x)\n", bp->b_flags)); + iodone (bp); + } + if ((sr & TS_TC) > TS_TC_FR) + tsreset (ctlr); + + return; +} + + +/* + * Open a ts device and set the unit online. If the controller is not + * in the run state, call init to initialize the ts controller first. + */ +int +tsopen (dev, flag) + dev_t dev; + int flag; +{ + register struct uba_device *ui; + register struct uba_ctlr *um; + register struct ts_softc *sc; + register int unit = TS_UNIT(dev); + int s; + + trace (("tsopen (%x, %x)\n", dev, flag)); + + if (unit >= NTS || (ui = tsinfo[unit]) == 0 || ui->ui_alive == 0) { + debug (("ui->ui_alive == 0\n")); + return (ENXIO); + } + sc = &ts_softc[ui->ui_ctlr]; /* unit ??? */ + if (sc->sc_openf) { + debug (("sc->sc_openf\n")); + return (EBUSY); + } + sc->sc_openf = 1; + sc->sc_tpr = tprintf_open (curproc); + s = splbio (); + if (sc->sc_state < ST_RUNNING) { /* XXX */ + printf ("ts%d not running.\n", ui->ui_ctlr); + (void) splx (s); + sc->sc_openf = 0; + return (ENXIO); + } + um = ui->ui_mi; + (void) splx (s); +#if 1 + /* + * check if transport is really online. + * (without attention-interrupts enabled, we really don't know + * the actual state of the transport. Thus we call get-status + * (ie. MTNOP) once and check the actual status.) + */ + tscommand (dev, MTNOP, 1); + if (ts[TS_CTLR(dev)].reg->tssr & TS_OFL) { + printf ("ts%d: transport is offline.\n", ui->ui_ctlr); + sc->sc_openf = 0; + return (EIO); /* transport is offline */ + } +#endif + sc->sc_liowf = 0; + return (0); +} + + +/* + * Close tape device. + * + * If tape was open for writing or last operation was + * a write, then write two EOF's and backspace over the last one. + * Unless this is a non-rewinding special file, rewind the tape. + * + * Make the tape available to others, by clearing openf flag. + */ +int +tsclose (dev, flag) + dev_t dev; + int flag; +{ + register struct ts_softc *sc = &ts_softc[TS_UNIT(dev)]; + + trace (("tsclose (%x, %d)\n", dev, flag)); + + if (flag == FWRITE || (flag & FWRITE) && sc->sc_liowf) { + debug (("tsclose: writing eot\n")); + /* + * We are writing two tape marks (EOT), but place the tape + * before the second one, so that another write operation + * will overwrite the second one and leave and EOF-mark. + */ + tscommand (dev, MTWEOF, 1); /* Write Tape Mark */ + tscommand (dev, MTWEOF, 1); /* Write Tape Mark */ + tscommand (dev, MTBSF, 1); /* Skip Tape Marks Reverse */ + } + + if ((minor(dev)&T_NOREWIND) == 0) { + debug (("tsclose: rewinding\n")); + tscommand (dev, MTREW, 0); + } + + tprintf_close (sc->sc_tpr); + sc->sc_openf = 0; + sc->sc_liowf = 0; + return (0); +} + + +/* + * Manage buffers and perform block mode read and write operations. + */ +void +tsstrategy (bp) + register struct buf *bp; +{ + register struct uba_device *ui; + register struct uba_ctlr *um; + register struct buf *dp; + register int ctlr = TS_CTLR(bp->b_dev); + register int unit = TS_UNIT(bp->b_dev); + int s; + + trace (("tsstrategy (...)\n")); + if (unit >= NTS) { + debug (("tsstrategy: bad unit # %d\n",unit)); + bp->b_flags |= B_ERROR; + iodone(bp); + return; + } + ui = tsinfo[unit]; + if (ui == 0 || ui->ui_alive == 0) { + debug (("tsstrategy: ui_alive == 0\n")); + bp->b_flags |= B_ERROR; + iodone(bp); + return; + } + + s = splbio (); + /* + * we have only one command at one time, no credits. + * thus we don't need buffer management and controller queue + * just try to execute the command ... + */ +#if 0 + if (ts_wtab[unit] != NULL) { + debug (("tsstrategy: already waiting for something\n")); + ts_wtab[unit]->b_flags |= B_ERROR; + iodone (ts_wtab[unit]); + } + ts_wtab[unit] = bp; +#endif + + um = ui->ui_mi; + if (um->um_tab.b_active == 0) { + /* + * If the controller is not active, start it. + */ + } + + tsstart (um, bp); + splx(s); + return; +} + + +/* + * Catch ioctl commands, and call the "command" routine to do them. + */ +int +tsioctl (dev, cmd, data, flag) + dev_t dev; + int cmd; + caddr_t data; + int flag; +{ + register struct buf *bp = &ts_cbuf[TS_UNIT(dev)]; + register struct uba_device *ui; + register struct ts_softc *sc; + register struct mtop *mtop; /* mag tape cmd op to perform */ + register struct mtget *mtget; /* mag tape struct to get info in */ + register callcount; /* number of times to call routine */ + int scount; /* number of files/records to space */ + int spaceop = 0; /* flag for skip/space operation */ + int error = 0; + + trace (("tsioctl (%x, %x, %x, %d)\n", dev, cmd, data, flag)); + + switch (cmd) { + case MTIOCTOP: /* do a mag tape op */ + mtop = (struct mtop *)data; + switch (mtop->mt_op) { + case MTWEOF: /* write an end-of-file record */ + callcount = mtop->mt_count; + scount = 1; + break; + case MTFSF: /* forward space file */ + case MTBSF: /* backward space file */ + case MTFSR: /* forward space record */ + case MTBSR: /* backward space record */ + spaceop = 1; + callcount = 1; + scount = mtop->mt_count; + break; + case MTREW: /* rewind */ + case MTOFFL: /* rewind and put the drive offline */ + case MTNOP: /* no operation, sets status only */ + callcount = 1; + scount = 1; /* wait for this rewind */ + break; + case MTRETEN: /* retension */ + case MTERASE: /* erase entire tape */ + case MTEOM: /* forward to end of media */ + case MTNBSF: /* backward space to begin of file */ + case MTCACHE: /* enable controller cache */ + case MTNOCACHE: /* disable controller cache */ + case MTSETBSIZ: /* set block size; 0 for variable */ + case MTSETDNSTY: /* set density code for current mode */ + debug (("ioctl %d not implemented.\n", mtop->mt_op)); + return (ENXIO); + default: + debug (("invalid ioctl %d\n", mtop->mt_op)); + return (ENXIO); + } /* switch (mtop->mt_op) */ + + if (callcount <= 0 || scount <= 0) { + debug (("invalid values %d/%d\n", callcount, scount)); + return (EINVAL); + } + do { + tscommand (dev, mtop->mt_op, scount); + if (spaceop && bp->b_resid) { + debug (("spaceop didn't complete\n")); + return (EIO); + } + if (bp->b_flags & B_ERROR) { + debug (("error in ioctl %d\n", mtop->mt_op)); + break; + } + } while (--callcount > 0); + if (bp->b_flags & B_ERROR) + if ((error = bp->b_error) == 0) + return (EIO); + return (error); + + case MTIOCGET: /* get tape status */ + sc = &ts_softc[TS_CTLR(dev)]; + mtget = (struct mtget *)data; + mtget->mt_type = MT_ISTS; + mtget->mt_dsreg = (unsigned)(ts[TS_CTLR(dev)].reg->tssr); + mtget->mt_erreg = (unsigned)(ts[TS_CTLR(dev)].msg.hdr); + mtget->mt_resid = 0; /* ??? */ + mtget->mt_density = 0; /* ??? */ + break; + + case MTIOCIEOT: /* ignore EOT error */ + debug (("MTIOCIEOT not implemented.\n")); + return (ENXIO); + + case MTIOCEEOT: /* enable EOT error */ + debug (("MTIOCEEOT not implemented.\n")); + return (ENXIO); + + default: + debug (("invalid ioctl cmd 0x%x\n", cmd)); + return (ENXIO); + } + + return (0); +} + + +/* + * + */ +int +tsread (dev, uio) + dev_t dev; + struct uio *uio; +{ + return (physio (tsstrategy, NULL, dev, B_READ, minphys, uio)); +} + +/* + * + */ +int +tswrite (dev, uio) + dev_t dev; + struct uio *uio; +{ + return (physio (tsstrategy, NULL, dev, B_WRITE, minphys, uio)); +} + +/* + * + */ +int +tsdump (dev) + dev_t dev; +{ + trace (("tsdump (%x)\n", dev)); +} + +/*----------------------------------------------------------------------*/ + +int +tsstatus (sr) + int sr; +{ +#ifdef DEBUG + debug (("status: TSSR=%b\n", sr, TS_TSSR_BITS)); + + if (tsdebug < 5) + return (0); + + if (sr & TS_SC) printf ("special condition\n"); + if (sr & TS_UPE) printf ("UPE\n"); + if (sr & TS_SCE) printf ("Sanity Check Error\n"); + if (sr & TS_RMR) printf ("Register Modification Refused\n"); + if (sr & TS_NXM) printf ("Nonexistent Memory\n"); + if (sr & TS_NBA) printf ("Need Buffer Address\n"); + if (sr & TS_A11) printf ("Address Bits 17-16\n"); + if (sr & TS_SSR) printf ("Subsystem Ready\n"); + if (sr & TS_OFL) printf ("Off Line\n"); + if (sr & TS_FTC) printf ("Fatal Termination Class Code\n"); + switch (sr & TS_TC) { + case TS_TC_NORM: printf ("Normal Termination\n"); break; + case TS_TC_ATTN: printf ("Attention Condition\n"); break; + case TS_TC_TSA: printf ("Tape status \n"); break; + case TS_TC_FR: printf ("Function reject\n"); break; + case TS_TC_TPD: printf ("Tape position down\n"); break; + case TS_TC_TNM: printf ("Tape not moved\n"); break; + case TS_TC_TPL: printf ("Tape position lost\n"); break; + case TS_TC_FCE: printf ("Fatal Controller Error\n"); break; + } +#endif + return (0); +} + +int +tsxstatus (mp) + struct tsmsg *mp; +{ +#ifdef DEBUG + debug (("tsxstatus: xst0=%b, xst1=%b, xst2=%b, xst3=%b, xst4=%b\n", + mp->xst0, TS_XST0_BITS, mp->xst1, TS_XST1_BITS, + mp->xst2, TS_XST2_BITS, mp->xst3, TS_XST3_BITS, + mp->xst4, "\20")); + + if (tsdebug < 10) + return (0); + + if (mp->xst0 & TS_SF_TMK) printf ("Tape Mark Detected\n"); + if (mp->xst0 & TS_SF_RLS) printf ("Record Length Short\n"); + if (mp->xst0 & TS_SF_LET) printf ("Logical End of Tape\n"); + if (mp->xst0 & TS_SF_RLL) printf ("Record Length Long\n"); + if (mp->xst0 & TS_SF_WLE) printf ("Write Lock Error\n"); + if (mp->xst0 & TS_SF_NEF) printf ("Nonexecutable Function\n"); + if (mp->xst0 & TS_SF_ILC) printf ("Illegal Command\n"); + if (mp->xst0 & TS_SF_ILA) printf ("Illegal Address\n"); + if (mp->xst0 & TS_SF_MOT) printf ("Motion\n"); + if (mp->xst0 & TS_SF_ONL) printf ("On-Line\n"); + if (mp->xst0 & TS_SF_IE) printf ("Interrupt Enable\n"); + if (mp->xst0 & TS_SF_VCK) printf ("Volume Check\n"); + if (mp->xst0 & TS_SF_PED) printf ("Phase Encoded Drive\n"); + if (mp->xst0 & TS_SF_WLK) printf ("Write Locked\n"); + if (mp->xst0 & TS_SF_BOT) printf ("Beginning of Tape\n"); + if (mp->xst0 & TS_SF_EOT) printf ("End of Tape\n"); + + if (mp->xst1 & TS_SF_DLT) printf ("Data Late\n"); + if (mp->xst1 & TS_SF_COR) printf ("Correctable Data\n"); + if (mp->xst1 & TS_SF_RBP) printf ("Read Bus Parity Error\n"); + if (mp->xst1 & TS_SF_UNC) printf ("Uncorrectable Data or Hard Error\n"); + + if (mp->xst2 & TS_SF_OPM) printf ("Operation in Progress\n"); + if (mp->xst2 & TS_SF_RCE) printf ("RAM Checksum Error\n"); + if (mp->xst2 & TS_SF_WCF) printf ("Write Clock Failure\n"); + if (mp->xst2 & TS_SF_EFES) printf ("extended features enabled\n"); + if (mp->xst2 & TS_SF_BES) printf ("Buffering enabled\n"); + + printf ("micro-code revision level: %d\n", (mp->xst2 & TS_SF_MCRL)>>2); + printf ("unit number: %d\n", (mp->xst2 & TS_SF_UNIT)); + + if (mp->xst3 & TS_SF_MDE) + printf ("Micro-Diagnostics Error Code: 0x%x\n", mp->xst3 >> 8); + if (mp->xst3 & TS_SF_OPI) printf ("Operation Incomplete\n"); + if (mp->xst3 & TS_SF_REV) printf ("Revers\n"); + if (mp->xst3 & TS_SF_DCK) printf ("Density Check\n"); + if (mp->xst3 & TS_SF_RIB) printf ("Reverse into BOT\n"); + + if (mp->xst4 & TS_SF_HSP) printf ("High Speed\n"); + if (mp->xst4 & TS_SF_RCX) printf ("Retry Count Exceeded\n"); +#endif +} + +int +ts_match(parent, match, aux) + struct device *parent; + void *match, *aux; +{ + return 0; +} + +void +ts_attach(parent, self, aux) + struct device *parent, *self; + void *aux; +{ +} + + + +#endif /* #if NTS > 0 */ + diff --git a/sys/arch/vax/uba/tsreg.h b/sys/arch/vax/uba/tsreg.h new file mode 100644 index 00000000000..f555f47ad44 --- /dev/null +++ b/sys/arch/vax/uba/tsreg.h @@ -0,0 +1,258 @@ +/* $NetBSD: tsreg.h,v 1.1 1996/01/06 16:43:47 ragge Exp $ */ +/* + * Copyright (c) 1995 Ludd, University of Lule}, Sweden. + * All rights reserved. + * + * This code is derived from software contributed to Ludd by + * Bertram Barth. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed at Ludd, University of + * Lule}, Sweden and its contributors. + * 4. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * TSV05 u.g. 5-11: + * + * The TSV05 Subsystem has four device registers that occupy only two + * LSI-11 Bus word locations: a Data Buffer (TSDB), a Bus Address + * Register (TSBA), a Status Register (TSSR), and an Extended Data + * Bufffer (TSDBX). The TSDB is an 18-bit register that is ... + */ + +struct tsdevice { + unsigned short tsdb;/* Data Buffer (TSDB)/Bus Address Register (TSBA) */ + unsigned short tssr;/* Status Reg. (TSSR)/Extended Data Buffer(TSDBX) */ +}; + +/* + * TSSR Register bit definitions + */ +#define TS_SC 0x8000 /* Special Condition */ +#define TS_UPE 0x4000 /* not used in TSV05, UPE in TS11 */ +#define TS_SCE 0x2000 /* Sanity Check Error, SPE in TS11 */ +#define TS_RMR 0x1000 /* Register Modification Refused */ +#define TS_NXM 0x0800 /* Nonexistent Memory */ +#define TS_NBA 0x0400 /* Need Buffer Address */ +#define TS_A11 0x0300 /* Address Bits 17-16 */ +#define TS_SSR 0x0080 /* Subsystem Ready */ +#define TS_OFL 0x0040 /* Off Line */ +#define TS_FTC 0x0030 /* Fatal Termination Class Code */ +#define TS_TC 0x000E /* Termination Class Code */ +#define TS_NU 0x0001 /* Not Used */ + +#define TS_TSSR_BITS "\20\20SC\17UPE\16SCE\15RMR\14NXM\13NBA\12A17\11A16" \ + "\10SSR\7OFL\6FTC\5FTC\4FTL\3ERR\2ATTN\1NU" + +/* + * Termination Codes + */ +#define TS_FTC_IDF (0<<4) /* internal diagnostic failure */ +#define TS_FTC_RSVD (1<<4) /* Reserved */ +#define TS_FTC_NU (2<<4) /* Not Used */ +#define TS_FTC_DPD (3<<4) /* Detection of Power Down (not implemented) */ + +#define TS_TC_NORM (0<<1) /* Normal Termination */ +#define TS_TC_ATTN (1<<1) /* Attention Condition */ +#define TS_TC_TSA (2<<1) /* Tape status alert */ +#define TS_TC_FR (3<<1) /* Function reject */ +#define TS_TC_TPD (4<<1) /* Tape position is one record down (recov.) */ +#define TS_TC_TNM (5<<1) /* Tape not moved (recoverable) */ +#define TS_TC_TPL (6<<1) /* Tape position lost (unrecoverable) */ +#define TS_TC_FCE (7<<1) /* Fatal Controller Error (see FTC) */ + +struct tscmd { /* command packet (not all words required) */ + unsigned short cmdr; /* command word */ + unsigned short cw1; /* low order data pointer address (A15-00) */ + unsigned short cw2; /* high order data pointer address (A21-16) */ + unsigned short cw3; /* count parameter */ +}; + +/* + * Command flags + */ +#define TS_CF_ACK (1<<15) /* Acknowledge */ +#define TS_CF_CVC (1<<14) /* Clear Volume Check */ +#define TS_CF_OPP (1<<13) /* Opposite */ +#define TS_CF_SWB (1<<12) /* Swap Bytes */ +#define TS_CF_IE (1<< 7) /* Interrupt Enable */ +#define TS_CF_CMODE 0x0F00 /* Command Mode Field */ +#define TS_CF_CCODE 0x001F /* Command Code (major) */ +#define TS_CF_CMASK 0x0F1F /* mask for complete command */ + +#define TS_CMD(cMode,cCode) ((cMode<<8)|cCode) + +#define TS_CC_READ 0x01 /* READ */ +#define TS_CMD_RNF TS_CMD(0,TS_CC_READ) /* Read Next (Forward) */ +#define TS_CMD_RPR TS_CMD(1,TS_CC_READ) /* Read Previous (Reverse) */ +#define TS_CMD_RPF TS_CMD(2,TS_CC_READ) /* Read Previous (Forward) */ +#define TS_CMD_RNR TS_CMD(3,TS_CC_READ) /* Read Next (Reverse) */ + +#define TS_CC_WCHAR 0x04 /* WRITE CHARACTERISTICS */ +#define TS_CMD_WCHAR TS_CMD(0,TS_CC_WCHAR) /* Load msg-buffer etc. */ + +#define TS_CC_WRITE 0x05 /* WRITE */ +#define TS_CMD_WD TS_CMD(0,TS_CC_WRITE) /* Write Data (Next) */ +#define TS_CMD_WDR TS_CMD(1,TS_CC_WRITE) /* Write Data (Retry) */ + +#define TS_CC_WSM 0x06 /* WRITE SUBSYSTEM MEMORY */ +#define TS_CMD_WSM TS_CMD(0,TS_CC_WSM) /* (diagnostics only) */ + +#define TS_CC_POS 0x08 /* POSITION */ +#define TS_CMD_SRF TS_CMD(0,TS_CC_POS) /* Space Records Forward */ +#define TS_CMD_SRR TS_CMD(1,TS_CC_POS) /* Space Records Reverse */ +#define TS_CMD_STMF TS_CMD(2,TS_CC_POS) /* Skip Tape Marks Forward */ +#define TS_CMD_STMR TS_CMD(3,TS_CC_POS) /* Skip Tape Marks Reverse */ +#define TS_CMD_RWND TS_CMD(4,TS_CC_POS) /* Rewind */ + +#define TS_CC_FRMT 0x09 /* FORMAT */ +#define TS_CMD_WTM TS_CMD(0,TS_CC_FRMT) /* Write Tape Mark */ +#define TS_CMD_ETM TS_CMD(1,TS_CC_FRMT) /* Erase */ +#define TS_CMD_WTMR TS_CMD(2,TS_CC_FRMT) /* Write Tape Mark (Retry) */ + +#define TS_CC_CTRL 0x0A /* CONTROL */ +#define TS_CMD_MBR TS_CMD(0,TS_CC_CTRL) /* Message Buffer Release */ +#define TS_CMD_RWUL TS_CMD(1,TS_CC_CTRL) /* Rewind and Unload */ +#define TS_CMD_NOP TS_CMD(2,TS_CC_CTRL) /* NO-OP (TS11: clean tape) */ +#define TS_CMD_RWII TS_CMD(4,TS_CC_CTRL) /* Rewind with intermediate */ + /* interrupt (TS11: N.A.) */ +#define TS_CC_INIT 0x0B /* INITIALIZE */ +#define TS_CMD_INIT TS_CMD(0,TS_CC_INIT) /* Controller/Drive Initial. */ + +#define TS_CC_STAT 0x0F /* GET STATUS */ +#define TS_CMD_STAT TS_CMD(0,TS_CC_STAT) /* Get Status (END) */ + +struct tsmsg { /* message packet */ + unsigned short hdr; /* ACK, class-code, format 1, message type */ + unsigned short dfl; /* data field length (8 bit) */ + unsigned short rbpcr; /* residual b/r/tm count word */ + unsigned short xst0; /* Extended Status Registers 0-4 */ + unsigned short xst1; + unsigned short xst2; + unsigned short xst3; + unsigned short xst4; /* total size: 16 bytes */ +}; + +/* + * Flags used in write-characteristics command + */ +#define TS_WC_ESS (1<<7) /* Enable Skip Tape Marks Stop */ +#define TS_WC_ENB (1<<6) /* Enable Tape Mark Stop at Bot */ +#define TS_WC_EAI (1<<5) /* Enable Attention interrupts */ +#define TS_WC_ERI (1<<4) /* Enable Message Buffer Release interrupts */ +#define TS_WC_HSP (1<<5) /* High Speed Select (25 in/s vs. 100 in/s) */ + +/* + * Status flags + * + * Extended Status register 0 (XST0) -- XST0 appears as the fourth word + * in the message buffer stored by the TSV05 subsystem upon completion of + * a command or an ATTN + */ +#define TS_SF_TMK (1<<15) /* Tape Mark Detected */ +#define TS_SF_RLS (1<<14) /* Record Length Short */ +#define TS_SF_LET (1<<13) /* Logical End of Tape */ +#define TS_SF_RLL (1<<12) /* Record Length Long */ +#define TS_SF_WLE (1<<11) /* Write Lock Error */ +#define TS_SF_NEF (1<<10) /* Nonexecutable Function */ +#define TS_SF_ILC (1<< 9) /* Illegal Command */ +#define TS_SF_ILA (1<< 8) /* Illegal Address */ +#define TS_SF_MOT (1<< 7) /* Motion */ +#define TS_SF_ONL (1<< 6) /* On-Line */ +#define TS_SF_IE (1<< 5) /* Interrupt Enable */ +#define TS_SF_VCK (1<< 4) /* Volume Check */ +#define TS_SF_PED (1<< 3) /* Phase Encoded Drive */ +#define TS_SF_WLK (1<< 2) /* Write Locked */ +#define TS_SF_BOT (1<< 1) /* Beginning of Tape */ +#define TS_SF_EOT (1<< 0) /* End of Tape */ + +#define TS_XST0_BITS "\20\20TMK\17RLS\16LET\15RLL\14WLE\13NEF\12ILC\11ILA" \ + "\10MOT\07ONL\06IE \05VCK\04PED\03WLK\02BOT\01EOT" +/* + * Extended Status register 1 (XST1) -- XST1 appears as the fifth word + * in the message buffer stored by the TSV05 subsystem upon completion of + * a command or an ATTN + */ +#define TS_SF_DLT (1<<15) /* Data Late */ +#define TS_SF_COR (1<<13) /* Correctable Data */ +#define TS_SF_CRS (1<<12) /* TS11: Crease Detected */ +#define TS_SF_TIG (1<<11) /* TS11: Trash in Gap */ +#define TS_SF_DBF (1<<10) /* TS11: Desckew Buffer Fail */ +#define TS_SF_SCK (1<< 9) /* TS11: Speed Check */ +#define TS_SF_RBP (1<< 8) /* Read Bus Parity Error */ +#define TS_SF_IPR (1<< 7) /* TS11: Invalid Preamble */ +#define TS_SF_IPO (1<< 6) /* TS11: Invalid Postamble */ +#define TS_SF_SYN (1<< 5) /* TS11: Sync Failure */ +#define TS_SF_IED (1<< 4) /* TS11: Invalid End Data */ +#define TS_SF_POS (1<< 3) /* TS11: Postamble short */ +#define TS_SF_POL (1<< 2) /* TS11: Postamble long */ +#define TS_SF_UNC (1<< 1) /* Uncorrectable Data or Hard Error */ +#define TS_SF_MTE (1<< 0) /* TS11: Multitrack Error */ + +#define TS_XST1_BITS "\20\20DLT\16COR\15CRS\14TIG\13DBF\12SCK\11RBP" \ + "\10IPR\07IPO\06SYN\05IED\04POS\03POL\02UNC\01MTE" + +/* + * Extended Status register 2 (XST2) -- sixth word + */ +#define TS_SF_OPM (1<<15) /* Operation in Progress (tape moving) */ +#define TS_SF_RCE (1<<14) /* RAM Checksum Error */ +#define TS_SF_SBP (1<<13) /* TS11: Serial 08 bus parity */ +#define TS_SF_CAF (1<<12) /* TS11: Capstan Acceleration fail */ +#define TS_SF_WCF (1<<10) /* Write Clock Failure */ +#define TS_SF_PDT (1<< 8) /* TS11: Parity Dead Track */ +#define TS_SF_RL 0x00FF /* Revision Level */ +#define TS_SF_EFES (1<< 7) /* extended features enable switch */ +#define TS_SF_BES (1<< 6) /* Buffering enable switch */ +#define TS_SF_MCRL 0x003F /* micro-code revision level */ +#define TS_SF_UNIT 0x0003 /* unit number of selected transport */ + +#define TS_XST2_BITS "\20\20OPM\17RCE\16SBP\15CAF\13WCF\11PDT\10EFES\7BES" + +/* + * Extended Status register 3 (XST3)) -- seventh word + */ +#define TS_SF_MDE 0xFF00 /* Micro-Diagnostics Error Code */ +#define TS_SF_LMX (1<< 7) /* TS11: Tension Arm Limit Exceeded */ +#define TS_SF_OPI (1<< 6) /* Operation Incomplete */ +#define TS_SF_REV (1<< 5) /* Revers */ +#define TS_SF_CRF (1<< 4) /* TS11: Capstan Response Failure */ +#define TS_SF_DCK (1<< 3) /* Density Check */ +#define TS_SF_NBE (1<< 2) /* TS11: Noise Bit during Erase */ +#define TS_SF_LSA (1<< 1) /* TS11: Limit Switch Activated */ +#define TS_SF_RIB (1<< 0) /* Reverse into BOT */ + +#define TS_XST3_BITS "\20\10LMX\07OPI\06REV\05CRF\04DCK\03NBE\02LSA\01RIB" + +/* + * Extended Status register 4 (XST4)) -- eighth word + */ +#define TS_SF_HSP (1<<15) /* High Speed */ +#define TS_SF_RCX (1<<14) /* Retry Count Exceeded */ +#define TS_SF_WRC 0x00FF /* Write Retry Count Statistics */ + +#define TS_XST4_BITS "\20\20HSP\17RCX" + + -- 2.20.1