From 5398fd3dcc8dbfe1968ccadefce70a73f5229995 Mon Sep 17 00:00:00 2001
From: kettenis <kettenis@openbsd.org>
Date: Mon, 9 Jan 2023 14:40:48 +0000
Subject: [PATCH] Adjust the hppa linker scripts to order .rodata (and other
 sections classified as read-only) before .text.  This makes it possible to
 make .text execute-only as it no longer contains the ELF program headers.

This is achieved by forking the ELF linker script template.  Adding another
level of conditionals to the existing ELF linker script template would be
utter madness.

ok deraadt@
---
 .../binutils-2.17/ld/emulparams/hppaobsd.sh   |   2 +-
 .../binutils-2.17/ld/scripttempl/elf_obsd.sc  | 562 ++++++++++++++++++
 2 files changed, 563 insertions(+), 1 deletion(-)
 create mode 100644 gnu/usr.bin/binutils-2.17/ld/scripttempl/elf_obsd.sc

diff --git a/gnu/usr.bin/binutils-2.17/ld/emulparams/hppaobsd.sh b/gnu/usr.bin/binutils-2.17/ld/emulparams/hppaobsd.sh
index 1c5a6fdadfe..5c502c24aa6 100644
--- a/gnu/usr.bin/binutils-2.17/ld/emulparams/hppaobsd.sh
+++ b/gnu/usr.bin/binutils-2.17/ld/emulparams/hppaobsd.sh
@@ -1,7 +1,7 @@
 . ${srcdir}/emulparams/hppaelf.sh
  
 #override hppaelf.sh
-SCRIPT_NAME=elf
+SCRIPT_NAME=elf_obsd
 ELFSIZE=32
 OUTPUT_FORMAT="elf32-hppa"
 
diff --git a/gnu/usr.bin/binutils-2.17/ld/scripttempl/elf_obsd.sc b/gnu/usr.bin/binutils-2.17/ld/scripttempl/elf_obsd.sc
new file mode 100644
index 00000000000..4a3d8a2b8cc
--- /dev/null
+++ b/gnu/usr.bin/binutils-2.17/ld/scripttempl/elf_obsd.sc
@@ -0,0 +1,562 @@
+#
+# Unusual variables checked by this code:
+#	NOP - four byte opcode for no-op (defaults to 0)
+#	TRAP - four byte opcode for death (defaults to $NOP)
+#	NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not
+#		empty.
+#	SMALL_DATA_CTOR - .ctors contains small data.
+#	SMALL_DATA_DTOR - .dtors contains small data.
+#	DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
+#	INITIAL_READONLY_SECTIONS - at start of text segment
+#	OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
+#		(e.g., .PARISC.milli)
+#	OTHER_TEXT_SECTIONS - these get put in .text when relocating
+#	OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
+#		(e.g., .PARISC.global)
+#	OTHER_RELRO_SECTIONS - other than .data.rel.ro ...
+#		(e.g. PPC32 .fixup, .got[12])
+#	OTHER_SECTIONS - at the end
+#	EXECUTABLE_SYMBOLS - symbols that must be defined for an
+#		executable (e.g., _DYNAMIC_LINK)
+#       TEXT_START_ADDR - the first byte of the text segment, after any
+#               headers.
+#       TEXT_BASE_ADDRESS - the first byte of the text segment.
+#	TEXT_START_SYMBOLS - symbols that appear at the start of the
+#		.text section.
+#	DATA_START_SYMBOLS - symbols that appear at the start of the
+#		.data section.
+#	DATA_END_SYMBOLS - symbols that appear at the end of the
+#		writeable data sections.
+#	OTHER_GOT_SYMBOLS - symbols defined just before .got.
+#	OTHER_GOT_SECTIONS - sections just after .got.
+#	OTHER_SDATA_SECTIONS - sections just after .sdata.
+#	OTHER_BSS_SYMBOLS - symbols that appear at the start of the
+#		.bss section besides __bss_start.
+#	DATA_PLT - .plt should be in data segment, not text segment.
+#	PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement.
+#	BSS_PLT - .plt should be in bss segment
+#	TEXT_DYNAMIC - .dynamic in text segment, not data segment.
+#	EMBEDDED - whether this is for an embedded system. 
+#	SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
+#		start address of shared library.
+#	INPUT_FILES - INPUT command of files to always include
+#	WRITABLE_RODATA - if set, the .rodata section should be writable
+#	INIT_START, INIT_END -  statements just before and just after
+# 	combination of .init sections.
+#	FINI_START, FINI_END - statements just before and just after
+# 	combination of .fini sections.
+#	STACK_ADDR - start of a .stack section.
+#	OTHER_SYMBOLS - symbols to place right at the end of the script.
+#	ETEXT_NAME - name of a symbol for the end of the text section,
+#		normally etext.
+#	SEPARATE_GOTPLT - if set, .got.plt should be separate output section,
+#		so that .got can be in the RELRO area.  It should be set to
+#		the number of bytes in the beginning of .got.plt which can be
+#		in the RELRO area as well.
+#
+# When adding sections, do note that the names of some sections are used
+# when specifying the start address of the next.
+#
+
+#  Many sections come in three flavours.  There is the 'real' section,
+#  like ".data".  Then there are the per-procedure or per-variable
+#  sections, generated by -ffunction-sections and -fdata-sections in GCC,
+#  and useful for --gc-sections, which for a variable "foo" might be
+#  ".data.foo".  Then there are the linkonce sections, for which the linker
+#  eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
+#  The exact correspondences are:
+#
+#  Section	Linkonce section
+#  .text	.gnu.linkonce.t.foo
+#  .rodata	.gnu.linkonce.r.foo
+#  .data	.gnu.linkonce.d.foo
+#  .bss		.gnu.linkonce.b.foo
+#  .sdata	.gnu.linkonce.s.foo
+#  .sbss	.gnu.linkonce.sb.foo
+#  .sdata2	.gnu.linkonce.s2.foo
+#  .sbss2	.gnu.linkonce.sb2.foo
+#  .debug_info	.gnu.linkonce.wi.foo
+#  .tdata	.gnu.linkonce.td.foo
+#  .tbss	.gnu.linkonce.tb.foo
+#  .lrodata	.gnu.linkonce.lr.foo
+#  .ldata	.gnu.linkonce.l.foo
+#  .lbss	.gnu.linkonce.lb.foo
+#
+#  Each of these can also have corresponding .rel.* and .rela.* sections.
+
+test -z "$TRAP" && TRAP=$NOP
+test -z "$ENTRY" && ENTRY=_start
+test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
+test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
+if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
+test -z "${ELFSIZE}" && ELFSIZE=32
+test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
+test "$LD_FLAG" = "N" && DATA_ADDR=.
+test -z "${ETEXT_NAME}" && ETEXT_NAME=etext
+test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
+test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
+test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
+DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
+DATA_SEGMENT_RELRO_END=""
+DATA_SEGMENT_END=""
+if test -n "${COMMONPAGESIZE}"; then
+  DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
+  DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
+  DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);"
+fi
+INTERP=".interp       ${RELOCATING-0} : { *(.interp) }"
+if test -z "$PLT"; then
+  PLT=".plt          ${RELOCATING-0} : { *(.plt) }"
+fi
+test -n "${PLT_BEFORE_GOT-${DATA_PLT-${BSS_PLT-text}}}" && TEXT_PLT=yes
+if test -z "$GOT"; then
+  if test -z "$SEPARATE_GOTPLT"; then
+    GOT=".got          ${RELOCATING-0} : { *(.got.plt) *(.got) }"
+  else
+    GOT=".got          ${RELOCATING-0} : { *(.got) }"
+    GOTPLT=".got.plt      ${RELOCATING-0} : { *(.got.plt) }"
+  fi
+fi
+DYNAMIC=".dynamic      ${RELOCATING-0} : { *(.dynamic) }"
+RODATA=".rodata       ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
+DATARELRO=".data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }"
+STACKNOTE="/DISCARD/ : { *(.note.GNU-stack) }"
+if test -z "${NO_SMALL_DATA}"; then
+  SBSS=".sbss         ${RELOCATING-0} :
+  {
+    ${RELOCATING+${SBSS_START_SYMBOLS}}
+    ${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)}
+    *(.dynsbss)
+    *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
+    *(.scommon)
+    ${RELOCATING+${SBSS_END_SYMBOLS}}
+  }"
+  SBSS2=".sbss2        ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
+  SDATA="/* We want the small data sections together, so single-instruction offsets
+     can access them all, and initialized data all before uninitialized, so
+     we can shorten the on-disk segment size.  */
+  .sdata        ${RELOCATING-0} : 
+  {
+    ${RELOCATING+${SDATA_START_SYMBOLS}}
+    ${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)}
+    *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
+  }"
+  SDATA2=".sdata2       ${RELOCATING-0} :
+  {
+    ${RELOCATING+${SDATA2_START_SYMBOLS}}
+    *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*})
+  }"
+  REL_SDATA=".rel.sdata    ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
+  .rela.sdata   ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
+  REL_SBSS=".rel.sbss     ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
+  .rela.sbss    ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
+  REL_SDATA2=".rel.sdata2   ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
+  .rela.sdata2  ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
+  REL_SBSS2=".rel.sbss2    ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
+  .rela.sbss2   ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
+else
+  NO_SMALL_DATA=" "
+fi
+if test -z "${DATA_GOT}"; then
+  if test -n "${NO_SMALL_DATA}"; then
+    DATA_GOT=" "
+  fi
+fi
+if test -z "${SDATA_GOT}"; then
+  if test -z "${NO_SMALL_DATA}"; then
+    SDATA_GOT=" "
+  fi
+fi
+test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
+test "${LARGE_SECTIONS}" = "yes" && REL_LARGE="
+  .rel.ldata    ${RELOCATING-0} : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) }
+  .rela.ldata   ${RELOCATING-0} : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) }
+  .rel.lbss     ${RELOCATING-0} : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) }
+  .rela.lbss    ${RELOCATING-0} : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) }
+  .rel.lrodata  ${RELOCATING-0} : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) }
+  .rela.lrodata ${RELOCATING-0} : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }"
+test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS="
+  .lbss ${RELOCATING-0} :
+  {
+    *(.dynlbss)
+    *(.lbss${RELOCATING+ .lbss.* .gnu.linkonce.lb.*})
+    *(LARGE_COMMON)
+  }
+  .lrodata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
+  {
+    *(.lrodata${RELOCATING+ .lrodata.* .gnu.linkonce.lr.*})
+  }
+  .ldata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
+  {
+    *(.ldata${RELOCATING+ .ldata.* .gnu.linkonce.l.*})
+    ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
+  }"
+RODATA_ALIGN_ADD_VAL="${CREATE_SHLIB-${RODATA_ALIGN_ADD:-0}} ${CREATE_SHLIB+0}"
+test "$LD_FLAG" = "n" || test "$LD_FLAG" = "N" || test "${LD_FLAG%%(cpie|pie)}" = "Z" || NO_PAD="y"
+if test "$NO_PAD" = "y" ; then
+  PAD_RO0="${RELOCATING+${RODATA_ALIGN} + ${RODATA_ALIGN_ADD_VAL};}"
+  PAD_PLT0="${RELOCATING+. = ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1));}"
+  PAD_PLT1="${RELOCATING+. = ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1));}"
+  PAD_GOT0="${RELOCATING+. = ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1));} .gotpad0 ${RELOCATING-0} : { ${RELOCATING+__got_start = .;} }"
+  PAD_GOT1=".gotpad1 ${RELOCATING-0} : { ${RELOCATING+__got_end = .;}} ${RELOCATING+. = ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1));}"
+  test "$NO_PAD_CDTOR" = "y" || PAD_CDTOR=
+fi
+
+CTOR=".ctors        ${CONSTRUCTING-0} : 
+  {
+    ${CONSTRUCTING+${CTOR_START}}
+    /* gcc uses crtbegin.o to find the start of
+       the constructors, so we make sure it is
+       first.  Because this is a wildcard, it
+       doesn't matter if the user does not
+       actually link against crtbegin.o; the
+       linker won't look for a file to match a
+       wildcard.  The wildcard also means that it
+       doesn't matter which directory crtbegin.o
+       is in.  */
+
+    KEEP (*crtbegin*.o(.ctors))
+
+    /* We don't want to include the .ctor section from
+       the crtend.o file until after the sorted ctors.
+       The .ctor section from the crtend file contains the
+       end of ctors marker and it must be last */
+
+    KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .ctors))
+    KEEP (*(SORT(.ctors.*)))
+    KEEP (*(.ctors))
+    ${CONSTRUCTING+${CTOR_END}}
+  }"
+DTOR=".dtors        ${CONSTRUCTING-0} :
+  {
+    ${CONSTRUCTING+${DTOR_START}}
+    KEEP (*crtbegin*.o(.dtors))
+    KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .dtors))
+    KEEP (*(SORT(.dtors.*)))
+    KEEP (*(.dtors))
+    ${CONSTRUCTING+${DTOR_END}}
+  }"
+STACK="  .stack        ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
+  {
+    ${RELOCATING+_stack = .;}
+    *(.stack)
+  }"
+
+# if this is for an embedded system, don't add SIZEOF_HEADERS.
+if [ -z "$EMBEDDED" ]; then
+   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
+else
+   test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
+fi
+
+cat <<EOF
+OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
+	      "${LITTLE_OUTPUT_FORMAT}")
+OUTPUT_ARCH(${OUTPUT_ARCH})
+ENTRY(${ENTRY})
+
+${RELOCATING+${LIB_SEARCH_DIRS}}
+${RELOCATING+${EXECUTABLE_SYMBOLS}}
+${RELOCATING+${INPUT_FILES}}
+${RELOCATING- /* For some reason, the Solaris linker makes bad executables
+  if gld -r is used and the intermediate file has sections starting
+  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
+  bug.  But for now assigning the zero vmas works.  */}
+
+SECTIONS
+{
+  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}}
+  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
+  ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
+  ${CREATE_SHLIB-${INTERP}}
+  ${INITIAL_READONLY_SECTIONS}
+  ${TEXT_DYNAMIC+${DYNAMIC}}
+  .hash         ${RELOCATING-0} : { *(.hash) }
+  .gnu.hash     ${RELOCATING-0} : { *(.gnu.hash) }
+  .dynsym       ${RELOCATING-0} : { *(.dynsym) }
+  .dynstr       ${RELOCATING-0} : { *(.dynstr) }
+  .gnu.version  ${RELOCATING-0} : { *(.gnu.version) }
+  .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
+  .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
+
+EOF
+if [ "x$COMBRELOC" = x ]; then
+  COMBRELOCCAT=cat
+else
+  COMBRELOCCAT="cat > $COMBRELOC"
+fi
+eval $COMBRELOCCAT <<EOF
+  .rel.init     ${RELOCATING-0} : { *(.rel.init) }
+  .rela.init    ${RELOCATING-0} : { *(.rela.init) }
+  .rel.text     ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
+  .rela.text    ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
+  .rel.fini     ${RELOCATING-0} : { *(.rel.fini) }
+  .rela.fini    ${RELOCATING-0} : { *(.rela.fini) }
+  .rel.rodata   ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
+  .rela.rodata  ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
+  ${OTHER_READONLY_RELOC_SECTIONS}
+  .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+* .rel.gnu.linkonce.d.rel.ro.*}) }
+  .rela.data.rel.ro ${RELOCATING-0} : { *(.rela.data.rel.ro${RELOCATING+* .rela.gnu.linkonce.d.rel.ro.*}) }
+  .rel.data     ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
+  .rela.data    ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
+  .rel.tdata	${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
+  .rela.tdata	${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
+  .rel.tbss	${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
+  .rela.tbss	${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
+  .rel.ctors    ${RELOCATING-0} : { *(.rel.ctors) }
+  .rela.ctors   ${RELOCATING-0} : { *(.rela.ctors) }
+  .rel.dtors    ${RELOCATING-0} : { *(.rel.dtors) }
+  .rela.dtors   ${RELOCATING-0} : { *(.rela.dtors) }
+  .rel.got      ${RELOCATING-0} : { *(.rel.got) }
+  .rela.got     ${RELOCATING-0} : { *(.rela.got) }
+  ${OTHER_GOT_RELOC_SECTIONS}
+  ${REL_SDATA}
+  ${REL_SBSS}
+  ${REL_SDATA2}
+  ${REL_SBSS2}
+  .rel.bss      ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
+  .rela.bss     ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
+  ${REL_LARGE}
+EOF
+if [ -n "$COMBRELOC" ]; then
+cat <<EOF
+  .rel.dyn      ${RELOCATING-0} :
+    {
+EOF
+sed -e '/^[ 	]*[{}][ 	]*$/d;/:[ 	]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/      \1/' $COMBRELOC
+cat <<EOF
+    }
+  .rela.dyn     ${RELOCATING-0} :
+    {
+EOF
+sed -e '/^[ 	]*[{}][ 	]*$/d;/:[ 	]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/      \1/' $COMBRELOC
+cat <<EOF
+    }
+EOF
+fi
+cat <<EOF
+  .rel.plt      ${RELOCATING-0} : { *(.rel.plt) }
+  .rela.plt     ${RELOCATING-0} : { *(.rela.plt) }
+  ${OTHER_PLT_RELOC_SECTIONS}
+
+  ${WRITABLE_RODATA-${RODATA}}
+  .rodata1      ${RELOCATING-0} : { *(.rodata1) }
+  ${CREATE_SHLIB-${SDATA2}}
+  ${CREATE_SHLIB-${SBSS2}}
+  ${OTHER_READONLY_SECTIONS}
+  .eh_frame_hdr : { *(.eh_frame_hdr) }
+  .eh_frame     ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
+  .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) }
+
+  /* Read-only sections, merged into text segment: */
+  ${PAD_RO+${PAD_RO0}}
+  .init         ${RELOCATING-0} : 
+  { 
+    ${RELOCATING+${INIT_START}}
+    KEEP (*(.init))
+    ${RELOCATING+${INIT_END}}
+  } =${NOP-0}
+
+  ${TEXT_PLT+${PLT}}
+  ${TINY_READONLY_SECTION}
+  .text         ${RELOCATING-0} :
+  {
+    ${RELOCATING+${TEXT_START_SYMBOLS}}
+    *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
+    KEEP (*(.text.*personality*))
+    /* .gnu.warning sections are handled specially by elf32.em.  */
+    *(.gnu.warning)
+    ${RELOCATING+${OTHER_TEXT_SECTIONS}}
+  } =${TRAP-0}
+  .fini         ${RELOCATING-0} :
+  {
+    ${RELOCATING+${FINI_START}}
+    KEEP (*(.fini))
+    ${RELOCATING+${FINI_END}}
+  } =${NOP-0}
+  ${RELOCATING+PROVIDE (__${ETEXT_NAME} = .);}
+  ${RELOCATING+PROVIDE (_${ETEXT_NAME} = .);}
+  ${RELOCATING+PROVIDE (${ETEXT_NAME} = .);}
+
+  ${DATA_NONEXEC_PLT-${DATA_PLT+${PLT_BEFORE_GOT-${PAD_PLT+${PAD_PLT0}}}}}
+  ${DATA_NONEXEC_PLT-${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}}
+  ${DATA_NONEXEC_PLT+${SDATA_GOT+${PAD_GOT+${PAD_GOT0}}}}
+  ${DATA_NONEXEC_PLT+${SDATA_GOT+${PLT}}}
+  ${DATA_NONEXEC_PLT+${SDATA_GOT+${RELOCATING+${OTHER_GOT_SYMBOLS}}}}
+  ${DATA_NONEXEC_PLT+${SDATA_GOT+${sdata_GOT-${GOT}}}}
+  ${DATA_NONEXEC_PLT+${SDATA_GOT+${OTHER_GOT_SECTIONS}}}
+  ${DATA_NONEXEC_PLT+${SDATA_GOT+${PAD_GOT+${PAD_GOT1}}}}
+
+  /* Adjust the address for the data segment.  We want to adjust up to
+     the same address within the page on the next page up.  */
+  ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
+  ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
+  ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
+  ${DATA_GOT+${PAD_GOT+${RELOCATING+PROVIDE_HIDDEN(__got_start = .);}}}
+  ${SDATA_GOT+${PAD_GOT+${RELOCATING+PROVIDE_HIDDEN(__got_start = .);}}}
+
+  /* Exception handling  */
+  .eh_frame     ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
+  .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
+
+  /* Thread Local Storage sections  */
+  .tdata	${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
+  .tbss		${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
+
+  .preinit_array   ${RELOCATING-0} :
+  {
+    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_start = .);}}
+    KEEP (*(.preinit_array))
+    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__preinit_array_end = .);}}
+  }
+  .init_array   ${RELOCATING-0} :
+  {
+     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_start = .);}}
+     KEEP (*(SORT(.init_array.*)))
+     KEEP (*(.init_array))
+     ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__init_array_end = .);}}
+  }
+  .fini_array   ${RELOCATING-0} :
+  {
+    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_start = .);}}
+    KEEP (*(.fini_array))
+    KEEP (*(SORT(.fini_array.*)))
+    ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (__fini_array_end = .);}}
+  }
+  .openbsd.randomdata   ${RELOCATING-0} :
+  {
+    *(.openbsd.randomdata${RELOCATING+ .openbsd.randomdata.*})
+  }
+  ${PAD_CDTOR-${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}}
+  ${PAD_CDTOR-${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}}
+  .jcr          ${RELOCATING-0} : { KEEP (*(.jcr)) }
+
+  ${RELOCATING+${DATARELRO}}
+  ${OTHER_RELRO_SECTIONS}
+  ${TEXT_DYNAMIC-${DYNAMIC}}
+  /* If PAD_CDTOR, and separate .got and .got.plt sections, CTOR and DTOR
+     are relocated here to receive the same mprotect protection as .got */
+  ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT+${PAD_CDTOR+${RELOCATING+${CTOR}}}}}}
+  ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT+${PAD_CDTOR+${RELOCATING+${DTOR}}}}}}
+  ${DATA_GOT+${RELRO_NOW+${PAD_CDTOR+${RELOCATING+${CTOR}}}}}
+  ${DATA_GOT+${RELRO_NOW+${PAD_CDTOR+${RELOCATING+${DTOR}}}}}
+  ${DATA_GOT+${DATA_NONEXEC_PLT+${PLT}}}
+  ${DATA_GOT+${RELRO_NOW+${GOT}}}
+  ${DATA_GOT+${RELRO_NOW+${GOTPLT}}}
+  ${DATA_GOT+${RELRO_NOW+${SDATA_GOT-${PAD_GOT+${RELOCATING+PROVIDE_HIDDEN(__got_end = .);}}}}}
+  ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}}
+  ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT+${PAD_GOT+${PAD_GOT1}}}}}
+
+  ${DATA_NONEXEC_PLT+${DATA_GOT-${PAD_CDTOR+${RELOCATING+${CTOR}}}}}
+  ${DATA_NONEXEC_PLT+${DATA_GOT-${PAD_CDTOR+${RELOCATING+${DTOR}}}}}
+  ${DATA_NONEXEC_PLT-${DATA_GOT-${PAD_CDTOR+${RELOCATING+${CTOR}}}}}
+  ${DATA_NONEXEC_PLT-${DATA_GOT-${PAD_CDTOR+${RELOCATING+${DTOR}}}}}
+
+  ${DATA_NONEXEC_PLT-${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}}
+  ${DATA_NONEXEC_PLT-${SDATA_GOT+${RELOCATING+${OTHER_GOT_SYMBOLS}}}}
+  ${DATA_NONEXEC_PLT-${SDATA_GOT+${sdata_GOT-${GOT}}}}
+
+  ${DATA_NONEXEC_PLT-${SDATA_GOT+${OTHER_GOT_SECTIONS}}}
+  ${DATA_NONEXEC_PLT-${SDATA_GOT+${RELRO_NOW+${RELOCATING+PROVIDE_HIDDEN(__got_end = .);}}}}
+  ${DATA_NONEXEC_PLT-${SDATA_GOT+${RELRO_NOW-${RELOCATING+${PAD_GOT1}}}}}
+
+  ${BSS_PLT+${bss_PLT-${PLT}}}
+
+  ${RELOCATING+${DATA_SEGMENT_RELRO_END}}
+
+  ${SDATA}
+  ${OTHER_SDATA_SECTIONS}
+
+  ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}}
+  ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT-${PAD_CDTOR+${RELOCATING+${CTOR}}}}}}
+  ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT-${PAD_CDTOR+${RELOCATING+${DTOR}}}}}}
+  ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT-${PAD_GOT+${PAD_GOT1}}}}}
+  ${DATA_GOT+${RELRO_NOW-${GOTPLT}}}
+
+  .data         ${RELOCATING-0} :
+  {
+    ${RELOCATING+${DATA_START_SYMBOLS}}
+    *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
+    KEEP (*(.gnu.linkonce.d.*personality*))
+    ${CONSTRUCTING+SORT(CONSTRUCTORS)}
+  }
+  .data1        ${RELOCATING-0} : { *(.data1) }
+  ${WRITABLE_RODATA+${RODATA}}
+  ${OTHER_READWRITE_SECTIONS}
+  ${PAD_CDTOR-${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}}}
+  ${PAD_CDTOR-${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}}}
+
+  ${RELOCATING+${DATA_END_SYMBOLS-_edata = .; PROVIDE (edata = .);}}
+  ${RELOCATING+__bss_start = .;}
+  ${RELOCATING+${OTHER_BSS_SYMBOLS}}
+  ${SBSS}
+  .bss          ${RELOCATING-0} :
+  {
+   *(.dynbss)
+   *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
+   *(COMMON)
+   /* Align here to ensure that the .bss section occupies space up to
+      _end.  Align after .bss to ensure correct alignment even if the
+      .bss section disappears because there are no input sections.
+      FIXME: Why do we need it? When there is no .bss section, we don't
+      pad the .data section.  */
+   ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
+  }
+  ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
+  ${RELOCATING+. = ALIGN(${ALIGNMENT});}
+  ${LARGE_SECTIONS}
+  ${RELOCATING+. = ALIGN(${ALIGNMENT});}
+  ${RELOCATING+${OTHER_END_SYMBOLS}}
+  ${RELOCATING+${END_SYMBOLS-_end = .; PROVIDE (end = .);}}
+  ${RELOCATING+${DATA_SEGMENT_END}}
+
+  /* Stabs debugging sections.  */
+  .stab          0 : { *(.stab) }
+  .stabstr       0 : { *(.stabstr) }
+  .stab.excl     0 : { *(.stab.excl) }
+  .stab.exclstr  0 : { *(.stab.exclstr) }
+  .stab.index    0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+
+  .comment       0 : { *(.comment) }
+
+  /* DWARF debug sections.
+     Symbols in the DWARF debugging sections are relative to the beginning
+     of the section so we begin them at 0.  */
+
+  /* DWARF 1 */
+  .debug          0 : { *(.debug) }
+  .line           0 : { *(.line) }
+
+  /* GNU DWARF 1 extensions */
+  .debug_srcinfo  0 : { *(.debug_srcinfo) }
+  .debug_sfnames  0 : { *(.debug_sfnames) }
+
+  /* DWARF 1.1 and DWARF 2 */
+  .debug_aranges  0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+
+  /* DWARF 2 */
+  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev   0 : { *(.debug_abbrev) }
+  .debug_line     0 : { *(.debug_line) }
+  .debug_frame    0 : { *(.debug_frame) }
+  .debug_str      0 : { *(.debug_str) }
+  .debug_loc      0 : { *(.debug_loc) }
+  .debug_macinfo  0 : { *(.debug_macinfo) }
+
+  /* SGI/MIPS DWARF 2 extensions */
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames  0 : { *(.debug_varnames) }
+
+  ${TINY_DATA_SECTION}
+  ${TINY_BSS_SECTION}
+
+  ${STACK_ADDR+${STACK}}
+  ${OTHER_SECTIONS}
+  ${RELOCATING+${OTHER_SYMBOLS}}
+  ${RELOCATING+${STACKNOTE}}
+}
+EOF
-- 
2.20.1