From 07e9d13b6f6b832d9718e8c1b8df6a4ad32bc157 Mon Sep 17 00:00:00 2001 From: jasper Date: Thu, 1 May 2014 11:48:47 +0000 Subject: [PATCH] - add 'sunxi' to list of miniroot files - add list of supported 'sunxi' and 'imx' hardware ok bmercer@ --- distrib/notes/armv7/contents | 6 +++++- distrib/notes/armv7/hardware | 20 +++++++++++++++++++- distrib/notes/armv7/prep | 12 ++++++------ 3 files changed, 30 insertions(+), 8 deletions(-) diff --git a/distrib/notes/armv7/contents b/distrib/notes/armv7/contents index e3bd39248a1..090044f3168 100644 --- a/distrib/notes/armv7/contents +++ b/distrib/notes/armv7/contents @@ -1,4 +1,4 @@ -dnl $OpenBSD: contents,v 1.3 2014/02/28 21:37:59 miod Exp $ +dnl $OpenBSD: contents,v 1.4 2014/05/01 11:48:47 jasper Exp $ TopPart miniroot-am335x-{:--:}OSrev.fs @@ -17,6 +17,10 @@ TopPart A miniroot filesystem to be used for installation; PandaBoard (ES) version. + miniroot-sunxi-{:--:}OSrev.fs + A miniroot filesystem to be used for + installation; Allwinner A1X/A20 version. + OpenBSDdistsets OpenBSDbsd diff --git a/distrib/notes/armv7/hardware b/distrib/notes/armv7/hardware index 00fce552916..71e3add7f9e 100644 --- a/distrib/notes/armv7/hardware +++ b/distrib/notes/armv7/hardware @@ -1,4 +1,4 @@ -dnl $OpenBSD: hardware,v 1.2 2014/02/28 00:55:02 afresh1 Exp $ +dnl $OpenBSD: hardware,v 1.3 2014/05/01 11:48:47 jasper Exp $ The following machines are targeted by OpenBSD/MACHINE: BeagleBoard, BeagleBoard xM @@ -20,3 +20,21 @@ The following machines are targeted by OpenBSD/MACHINE: USB controller (ehci) watchdog controller (omdog) GPIO controller (omgpio) + + Cubieboard, Cubieboard 2, pcDuino + Supported on-board devices: + standard serial port (com) + watchdog controller (sxidog) + ethernet controller (sxie) + USB controller (ehci) + AHCI controller (ahci) + GPIO controller (sxipio) + + SABRE Lite, Nitrogen6X + Supported on-board devices: + standard serial port (com) + USB controller (ehci) + watchdog controller (imxdog) + ethernet controller (imxenet) + GPIO controller (imxgpio) + OTP controller (imxocotp) diff --git a/distrib/notes/armv7/prep b/distrib/notes/armv7/prep index 72f44d96e8c..44db43dda5a 100644 --- a/distrib/notes/armv7/prep +++ b/distrib/notes/armv7/prep @@ -1,10 +1,10 @@ -dnl $OpenBSD: prep,v 1.3 2014/02/28 00:47:14 afresh1 Exp $ +dnl $OpenBSD: prep,v 1.4 2014/05/01 11:48:47 jasper Exp $ Please be aware that OpenBSD support for this platform is far from complete. At the moment the only way to boot the OpenBSD install is to copy the -miniroot for your board "miniroot-{am335x,beagle,imx,panda}-{:--:}OSrev.fs" -image to a sdcard. +miniroot for your board "miniroot-{am335x,beagle,imx,panda,sunxi}-{:--:}OSrev.fs" +image to an sdcard. As a result you need another machine to plug the sdcard in. Any machine type will do, as long as it supports sdcard storage devices. @@ -18,7 +18,7 @@ When you have connected the BeagleBoard to you computer, a command such as "cu -l cuaU0 -s 115200" (assuming cuaU0 is your serial port device) should connect you to the board's console. -Note: By default the BeagleBone Black will boot from the internal emmc. +Note: By default the BeagleBone Black will boot from the internal emmc. In order to make it boot from the micro sdcard, you will need to hold down -the small button located by the sdcard slot while powering on the board. -Once you have done this the board will boot from the sdcard as the default. +the small button located by the sdcard slot while powering on the board. +Once you have done this the board will boot from the sdcard as the default. -- 2.20.1