From: niklas <niklas@openbsd.org>
Date: Fri, 24 Jan 1997 19:34:15 +0000 (+0000)
Subject: Sync with NetBSD 960123
X-Git-Url: http://artulab.com/gitweb/?a=commitdiff_plain;h=fccdb5ffa67d043947452784c551f966a93a6ade;p=openbsd

Sync with NetBSD 960123
---

diff --git a/sys/dev/pci/pci.c b/sys/dev/pci/pci.c
index e75d16ea2fb..29c9e453a5f 100644
--- a/sys/dev/pci/pci.c
+++ b/sys/dev/pci/pci.c
@@ -1,5 +1,5 @@
-/*	$OpenBSD: pci.c,v 1.5 1996/11/28 23:28:09 niklas Exp $	*/
-/*	$NetBSD: pci.c,v 1.24 1996/10/21 22:56:55 thorpej Exp $	*/
+/*	$OpenBSD: pci.c,v 1.6 1997/01/24 19:34:15 niklas Exp $	*/
+/*	$NetBSD: pci.c,v 1.26 1996/12/05 01:25:30 cgd Exp $	*/
 
 /*
  * Copyright (c) 1995, 1996 Christopher G. Demetriou.  All rights reserved.
@@ -56,6 +56,30 @@ struct cfdriver pci_cd = {
 int	pciprint __P((void *, const char *));
 int	pcisubmatch __P((struct device *, void *, void *));
 
+/*
+ * Callback so that ISA/EISA bridges can attach their child busses
+ * after PCI configuration is done.
+ *
+ * This works because:
+ *	(1) there can be at most one ISA/EISA bridge per PCI bus, and
+ *	(2) any ISA/EISA bridges must be attached to primary PCI
+ *	    busses (i.e. bus zero).
+ *
+ * That boils down to: there can only be one of these outstanding
+ * at a time, it is cleared when configuring PCI bus 0 before any
+ * subdevices have been found, and it is run after all subdevices
+ * of PCI bus 0 have been found.
+ *
+ * This is needed because there are some (legacy) PCI devices which
+ * can show up as ISA/EISA devices as well (the prime example of which
+ * are VGA controllers).  If you attach ISA from a PCI-ISA/EISA bridge,
+ * and the bridge is seen before the video board is, the board can show
+ * up as an ISA device, and that can (bogusly) complicate the PCI device's
+ * attach code, or make the PCI device not be properly attached at all.
+ */
+static void	(*pci_isa_bridge_callback) __P((void *));
+static void	*pci_isa_bridge_callback_arg;
+
 int
 pcimatch(parent, match, aux)
 	struct device *parent;
@@ -102,6 +126,9 @@ pciattach(parent, self, aux)
 	bus = pba->pba_bus;
 	maxndevs = pci_bus_maxdevs(pc, bus);
 
+	if (bus == 0)
+		pci_isa_bridge_callback = NULL;
+
 	for (device = 0; device < maxndevs; device++) {
 		pcitag_t tag;
 		pcireg_t id, class, intr, bhlcr;
@@ -158,6 +185,9 @@ pciattach(parent, self, aux)
 			config_found_sm(self, &pa, pciprint, pcisubmatch);
 		}
 	}
+
+	if (bus == 0 && pci_isa_bridge_callback != NULL)
+		(*pci_isa_bridge_callback)(pci_isa_bridge_callback_arg);
 }
 
 int
@@ -293,3 +323,15 @@ pci_mem_find(pc, pcitag, reg, membasep, memsizep, cacheablep)
 
 	return 0;
 }
+
+void
+set_pci_isa_bridge_callback(fn, arg)
+	void (*fn) __P((void *));
+	void *arg;
+{
+
+	if (pci_isa_bridge_callback != NULL)
+		panic("set_pci_isa_bridge_callback");
+	pci_isa_bridge_callback = fn;
+	pci_isa_bridge_callback_arg = arg;
+}
diff --git a/sys/dev/pci/pcivar.h b/sys/dev/pci/pcivar.h
index ffdf225dc56..225907936fa 100644
--- a/sys/dev/pci/pcivar.h
+++ b/sys/dev/pci/pcivar.h
@@ -1,5 +1,5 @@
-/*	$OpenBSD: pcivar.h,v 1.9 1996/11/28 23:28:14 niklas Exp $	*/
-/*	$NetBSD: pcivar.h,v 1.16 1996/10/21 22:56:57 thorpej Exp $	*/
+/*	$OpenBSD: pcivar.h,v 1.10 1997/01/24 19:34:16 niklas Exp $	*/
+/*	$NetBSD: pcivar.h,v 1.18 1996/12/01 21:02:18 leo Exp $	*/
 
 /*
  * Copyright (c) 1996 Christopher G. Demetriou.  All rights reserved.
@@ -54,12 +54,15 @@ struct pcibus_attach_args;
 /*
  * Machine-dependent definitions.
  */
-#if (alpha + i386 != 1)
+#if (alpha + atari + i386 != 1)
 ERROR: COMPILING FOR UNSUPPORTED MACHINE, OR MORE THAN ONE.
 #endif
 #if alpha
 #include <alpha/pci/pci_machdep.h>
 #endif
+#if atari
+#include <atari/pci/pci_machdep.h>
+#endif
 #if i386
 #include <i386/pci/pci_machdep.h>
 #endif
@@ -138,5 +141,6 @@ int	pci_mem_find __P((pci_chipset_tag_t, pcitag_t, int, bus_addr_t *,
  * Helper functions for autoconfiguration.
  */
 void	pci_devinfo __P((pcireg_t, pcireg_t, int, char *));
+void	set_pci_isa_bridge_callback __P((void (*)(void *), void *));
 
 #endif /* _DEV_PCI_PCIVAR_H_ */