From: bluhm Date: Fri, 5 Feb 2021 14:12:17 +0000 (+0000) Subject: Setup two pair(4) and one lo(4) interface in different routing X-Git-Url: http://artulab.com/gitweb/?a=commitdiff_plain;h=f01a0a47094af5d065cdd4ad87d7994d44f2035f;p=openbsd Setup two pair(4) and one lo(4) interface in different routing domains and with different interface MTU. Test that packet flow and TCP path MTU discovery works. --- diff --git a/regress/sys/net/pair/Makefile b/regress/sys/net/pair/Makefile new file mode 100644 index 00000000000..a0a95d09ec7 --- /dev/null +++ b/regress/sys/net/pair/Makefile @@ -0,0 +1,177 @@ +# $OpenBSD: Makefile,v 1.1 2021/02/05 14:12:17 bluhm Exp $ + +# Copyright (c) 2021 Alexander Bluhm +# +# Permission to use, copy, modify, and distribute this software for any +# purpose with or without fee is hereby granted, provided that the above +# copyright notice and this permission notice appear in all copies. +# +# THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES +# WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR +# ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES +# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN +# ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF +# OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + +# Setup two pair(4) and one lo(4) interface in different routing +# domains and with different interface MTU. + +# pair1 with MTU 8000 <-> pair2 <-> loopback3 + +# Both pairs are patched. Between pair2 and loopback3 pf switches +# the routing table. Do extensive ping tests to check that packets +# get through. Use tcpbench for TCP path MTU discovery. The jumbo +# frames with MTU 8000 together with switching the routing domain +# trigger unusual code paths in the kernel. + +# This test uses routing domain 11, 12, 13. +# Adjust it here, if you want to use something else. +N1 = 11 +N2 = 12 +N3 = 13 +NUMS = ${N1} ${N2} ${N3} +PAIRS = ${N1} ${N2} +IP_${N1} = 169.254.1.${N1} +IP6_${N1} = fc00:0:0:1::${N1} +IP_${N2} = 169.254.1.${N2} +IP6_${N2} = fc00:0:0:1::${N2} +IP_${N3} = 169.254.0.${N3} +IP6_${N3} = fc00::${N3} + +.include + +.if ! (make(clean) || make(cleandir) || make(obj)) + +SYSCTL_FORWARDING != sysctl net.inet.ip.forwarding +SYSCTL_FORWARDING6 != sysctl net.inet6.ip6.forwarding +.if ${SYSCTL_FORWARDING:C/.*=//} != 1 || ${SYSCTL_FORWARDING6:C/.*=//} != 1 +regress: + @echo sysctl: "${SYSCTL_FORWARDING}" "${SYSCTL_FORWARDING6}" + @echo Set sysctl to 1 to run this regress. + @echo SKIPPED +.endif + +PF_STATUS != ${SUDO} pfctl -si | sed -n 's/^Status: \([^ ]*\) .*/\1/p' +.if empty(PF_STATUS:MEnabled) +regress: + @echo pf status: "${PF_STATUS}" + @echo Enable pf to run this regress. + @echo SKIPPED +.endif + +PF_SKIP != ${SUDO} pfctl -sI -v | sed -n 's/ (skip)//p' +.if ! empty(PF_SKIP:Mlo*:Nlo0) +regress: + @echo pf skip: "${PF_SKIP}" + @echo Do not set skip on interface lo or lo$N. + @echo SKIPPED +.endif + +PF_ANCHOR != ${SUDO} pfctl -sr | sed -n 's/^anchor "\([^"]*\)" all$$/\1/p' +.if empty(PF_ANCHOR:Mregress) +regress: + @echo pf anchor: "${PF_ANCHOR}" + @echo Need anchor '"regress"' in pf.conf to load additional rules. + @echo SKIPPED +.endif + +.endif + +.PHONY: ifconfig unconfig pfctl + +REGRESS_SETUP_ONCE += ifconfig +ifconfig: unconfig + # Create and configure pflog and loopback interfaces. +.for n in ${NUMS} + ${SUDO} ifconfig lo$n rdomain $n + ${SUDO} ifconfig lo$n inet 127.0.0.1/8 + ${SUDO} ifconfig lo$n inet6 ::1/128 + ${SUDO} route -n -T $n add -inet 169.254.0.0/16 127.0.0.1 + ${SUDO} route -n -T $n add -inet6 fc00::/48 ::1 +.endfor +.for n in ${PAIRS} + ${SUDO} ifconfig pair$n rdomain $n + ${SUDO} ifconfig pair$n inet ${IP_$n}/24 + ${SUDO} ifconfig pair$n inet6 ${IP6_$n}/64 +.endfor + ${SUDO} ifconfig pair${N1} patch pair${N2} + ${SUDO} ifconfig lo${N3} inet ${IP_${N3}}/24 alias + ${SUDO} ifconfig lo${N3} inet6 ${IP6_${N3}}/64 + ${SUDO} ifconfig pair${N1} mtu 8000 + ${SUDO} route -n -T ${N1} add -inet ${IP_${N3}} ${IP_${N2}} + ${SUDO} route -n -T ${N1} add -inet6 ${IP6_${N3}} ${IP6_${N2}} + # Wait until IPv6 addresses are no longer tentative. + for i in `jot 50`; do\ + if ! { ifconfig pair${N1}; ifconfig pair${N2}; ifconfig lo${N3}; }\ + | fgrep -q tentative; then\ + break;\ + fi;\ + sleep .1;\ + done + ! { ifconfig pair${N1}; ifconfig pair${N2}; ifconfig lo${N3};}\ + | fgrep tentative + +REGRESS_CLEANUP += unconfig +unconfig: + # Destroy interfaces. + -${SUDO} route -n -T ${N1} delete -inet ${IP_${N3}} + -${SUDO} route -n -T ${N1} delete -inet6 ${IP6_${N3}} + -${SUDO} ifconfig lo${N3} inet ${IP_${N3}} delete + -${SUDO} ifconfig lo${N3} inet6 ${IP6_${N3}} delete +.for n in ${PAIRS} + -${SUDO} ifconfig pair$n destroy +.endfor +.for n in ${NUMS} + -${SUDO} route -n -T $n delete -inet 169.254.0.0/16 + -${SUDO} route -n -T $n delete -inet6 fc00::/48 + -${SUDO} ifconfig lo$n inet 127.0.0.1 delete + -${SUDO} ifconfig lo$n inet6 ::1 delete +.endfor + rm -f stamp-ifconfig + +addr.py: Makefile + # Create python include file containing the addresses. + rm -f $@ $@.tmp +.for var in N1 N2 N3 + echo '${var}="${${var}}"' >>$@.tmp + echo 'LO_${var}="lo${${var}}"' >>$@.tmp + echo 'PAIR_${var}="pair${${var}}"' >>$@.tmp + echo 'IP_${var}="${IP_${${var}}}"' >>$@.tmp + echo 'IP6_${var}="${IP6_${${var}}}"' >>$@.tmp +.endfor + mv $@.tmp $@ + +REGRESS_SETUP_ONCE += pfctl +pfctl: addr.py pf.conf + # Load the pf rules into the kernel. + cat addr.py ${.CURDIR}/pf.conf | /sbin/pfctl -n -f - + cat addr.py ${.CURDIR}/pf.conf | ${SUDO} pfctl -a regress -f - + +.for f in 1 2 3 +.for t in 1 2 3 +REGRESS_TARGETS += run-ping-$f-$t +run-ping-$f-$t: + ping -c 1 -w 1 -n -V ${N$f} -I ${IP_${N$f}} ${IP_${N$t}} + +REGRESS_TARGETS += run-ping6-$f-$t +run-ping6-$f-$t: + ping6 -c 1 -w 1 -n -V ${N$f} -I ${IP6_${N$f}} ${IP6_${N$t}} + +REGRESS_TARGETS += run-tcpbench-$f-$t +run-tcpbench-$f-$t: + rm -f nc.log + nc -v -l -V ${N$t} ${IP_${N$t}} 12345 >/dev/null 2>nc.log & + # Wait until nc is listening. + for i in `jot 30`; do\ + if fgrep -q Listening nc.log; then break; fi; sleep .1; done + fgrep Listening nc.log + # Test that path MTU dicovery is working. + tcpbench -t 5 -V ${N$f} -b ${IP_${N$f}} ${IP_${N$t}} + route -T ${N$f} -n get ${IP_${N$t}} +.endfor +.endfor + +CLEANFILES += addr.py *.pyc *.log stamp-* + +.include diff --git a/regress/sys/net/pair/pf.conf b/regress/sys/net/pair/pf.conf new file mode 100644 index 00000000000..8f4bbd12be0 --- /dev/null +++ b/regress/sys/net/pair/pf.conf @@ -0,0 +1,4 @@ +pass out on rdomain $N3 to { $IP_N1 $IP_N2 } rtable $N2 +pass out on rdomain $N3 to { $IP6_N1 $IP6_N2 } rtable $N2 +pass out on rdomain $N2 to $IP_N3 rtable $N3 +pass out on rdomain $N2 to $IP6_N3 rtable $N3