From: deraadt Date: Mon, 24 Apr 2000 20:23:28 +0000 (+0000) Subject: remove old stuff X-Git-Url: http://artulab.com/gitweb/?a=commitdiff_plain;h=e9ab719bafea52f96b12d1a46905d8e89e30bd7f;p=openbsd remove old stuff --- diff --git a/distrib/sparc/Makefile b/distrib/sparc/Makefile index 10128c4a2e3..3b9e6293ad9 100644 --- a/distrib/sparc/Makefile +++ b/distrib/sparc/Makefile @@ -1,8 +1,5 @@ -# $OpenBSD: Makefile,v 1.4 1998/12/15 00:40:29 deraadt Exp $ +# $OpenBSD: Makefile,v 1.5 2000/04/24 20:23:28 deraadt Exp $ -# at this point only the floppies directory has object, ramdisk and -# miniroot are just architeture dependent inclusions for ../ramdisk, etc. -#SUBDIR= floppies SUBDIR+= ../ramdisk ../miniroot .include diff --git a/distrib/sparc/floppies/Makefile b/distrib/sparc/floppies/Makefile deleted file mode 100644 index 28de8b45217..00000000000 --- a/distrib/sparc/floppies/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# $OpenBSD: Makefile,v 1.3 1997/05/01 11:30:45 niklas Exp $ - -SUBDIR= kernel inst upgr - -unconfig: - cd kernel; ${MAKE} unconfig - -.include diff --git a/distrib/sparc/floppies/Makefile.inc b/distrib/sparc/floppies/Makefile.inc deleted file mode 100644 index 7ef83e82ea8..00000000000 --- a/distrib/sparc/floppies/Makefile.inc +++ /dev/null @@ -1,5 +0,0 @@ -# $OpenBSD: Makefile.inc,v 1.8 1998/06/27 20:52:14 todd Exp $ - -REV= ${OSrev} - -.include diff --git a/distrib/sparc/floppies/inst-common/Makefile.inc b/distrib/sparc/floppies/inst-common/Makefile.inc deleted file mode 100644 index 22f83cd8dbf..00000000000 --- a/distrib/sparc/floppies/inst-common/Makefile.inc +++ /dev/null @@ -1,63 +0,0 @@ -# $OpenBSD: Makefile.inc,v 1.11 1997/09/26 01:51:29 millert Exp $ - -# TOP is assumed to be defined by Makefile including this one. - -CBIN= instbin -COMMONDIR= ${TOP}/inst-common - -MOUNT_POINT?= /mnt -VND?= svnd0 -VND_DEV= /dev/${VND}a -VND_RDEV= /dev/r${VND}a -PID!= echo $$$$ -REALIMAGE!= echo /var/tmp/image.${PID} -IMAGE?= inst${REV}.fs -MDEC= ${DESTDIR}/usr/mdec - -LISTS= ${COMMONDIR}/list ${.CURDIR}/list -.if (${KERBEROS} == "yes") -CRUNCHCONF= ${COMMONDIR}/${CBIN}-krb.conf -.else -CRUNCHCONF= ${COMMONDIR}/${CBIN}.conf -.endif -MTREE= ${COMMONDIR}/mtree.conf - -all: ${CBIN} - dd if=/dev/zero of=${REALIMAGE} bs=120k count=12 - vnconfig -v -c ${VND} ${REALIMAGE} - disklabel -w ${VND} floppy3 - newfs -O -m 0 -o space -i 8192 -c 80 ${VND_RDEV} - mount ${VND_DEV} ${MOUNT_POINT} - mtree -def ${MTREE} -p ${MOUNT_POINT}/ -u - TOPDIR=${TOP} CURDIR=${.CURDIR} OBJDIR=${.OBJDIR} \ - TARGDIR=${MOUNT_POINT} sh ${TOP}/runlist.sh ${LISTS} - df -i ${MOUNT_POINT} - umount ${MOUNT_POINT} - vnconfig -u ${VND} - cp ${REALIMAGE} ${IMAGE} - rm ${REALIMAGE} - -unconfig: - -umount -f ${MOUNT_POINT} - -vnconfig -u ${VND} - -/bin/rm -f ${IMAGE} - -${CBIN}.mk ${CBIN}.cache ${CBIN}.c: ${CRUNCHCONF} - crunchgen -D ${TOP}/../../.. -m ${CBIN}.mk -L ${DESTDIR}/usr/lib \ - ${CRUNCHCONF} - -${CBIN}: ${CBIN}.mk ${CBIN}.cache ${CBIN}.c - make -f ${CBIN}.mk all -.if (${KERBEROS} == "yes") - mv ${CBIN}-krb ${CBIN} -.endif - -clean cleandir: - /bin/rm -f ${IMAGE} ${CBIN} ${CBIN}-krb.mk ${CBIN}-krb.cache \ - ${CBIN}.mk ${CBIN}.cache *.o *.lo *.c - -beforeinstall: - cp ${IMAGE} ${DESTDIR}/snapshot - -.include -.include diff --git a/distrib/sparc/floppies/inst-common/dot.commonutils b/distrib/sparc/floppies/inst-common/dot.commonutils deleted file mode 100644 index efe4fe919ed..00000000000 --- a/distrib/sparc/floppies/inst-common/dot.commonutils +++ /dev/null @@ -1,131 +0,0 @@ -# $OpenBSD: dot.commonutils,v 1.5 1996/12/09 07:05:19 deraadt Exp $ -# -# Copyright (c) 1994 Christopher G. Demetriou -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. All advertising materials mentioning features or use of this software -# must display the following acknowledgement: -# This product includes software developed by Christopher G. Demetriou. -# 4. The name of the author may not be used to endorse or promote products -# derived from this software without specific prior written permission -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -# Installation utilites (functions), to get OpenBSD installed on -# the hard disk. These are meant to be invoked from the shell prompt, -# by people installing OpenBSD. - -# we know that /etc/fstab is only generated on the hard drive -dest_dir=/ -if [ ! -f /etc/fstab ]; then - dest_dir=/mnt/ -fi - -# counter for possible shared library confusion -TAR=/bin/tar -GUNZIP="/usr/bin/gzip -d" - -Set_tmp_dir() -{ - def_tmp_dir=`pwd` - if [ "$def_tmp_dir" = "/" -o "$def_tmp_dir" = "/mnt" ]; then - def_tmp_dir="$dest_dir"usr/distrib - fi - - echo -n "What directory should be used to find and/or store " - echo "installtion" - echo -n "files? [$def_tmp_dir] " - read tmp_dir - if [ "$tmp_dir" = "" ]; then - tmp_dir=$def_tmp_dir - fi - if [ ! -d "$tmp_dir" ]; then - /bin/rm -rf $tmp_dir - mkdir -p $tmp_dir - fi -} - -Tmp_dir() -{ - if [ "$tmp_dir" = "" ]; then - Set_tmp_dir - fi - cd $tmp_dir -} - -Load_fd() -{ - Tmp_dir - which= - echo "Don't forget that you can't load from the drive you booted from." - echo "" - - while [ "$which" != "0" -a "$which" != "1" ]; do - echo -n "Read from which floppy drive ('0' or '1')? [1] " - read which - if [ "X$which" = "X" ]; then - which=1 - fi - done - echo "" - echo "WARNING: during the floppy loading process, you should only" - echo "use Control-C at the prompt." - echo "" - while echo -n \ - "Insert floppy (hit Control-C to terminate, enter to load): " - do - read foo - mount -r -t msdos /dev/fd${which}a /mnt2 - cp -rp /mnt2/* . - umount /mnt2 - done -} - -Load_tape() -{ - Tmp_dir - echo -n "Which tape drive will you be using? [rst0] " - read which - if [ "X$which" = "X" ]; then - which=rst0 - fi - echo -n "Insert the tape into the tape drive and hit return to " - echo -n "continue..." - read foo - echo "Extracting files from the tape..." - $TAR xvpf /dev/$which - echo "Done." -} - -Extract() -{ - Tmp_dir - echo -n "Would you like to list the files as they're extracted? [n] " - read verbose - case $verbose in - y*|Y*) - tarverbose=v - ;; - *) - tarverbose= - ;; - esac - cat "$1"* | $GUNZIP | (cd $dest_dir ; $TAR -xp"$tarverbose"f - ) -} diff --git a/distrib/sparc/floppies/inst-common/instbin-krb.conf b/distrib/sparc/floppies/inst-common/instbin-krb.conf deleted file mode 100644 index be42d906494..00000000000 --- a/distrib/sparc/floppies/inst-common/instbin-krb.conf +++ /dev/null @@ -1,27 +0,0 @@ -# $OpenBSD: instbin-krb.conf,v 1.8 1998/11/20 00:20:49 deraadt Exp $ -# -# kcbin.conf - unified binary for the kc floppy -# - -srcdirs distrib/special -srcdirs bin sbin usr.bin/less usr.bin usr.sbin gnu/usr.bin sys/arch/sparc/stand - -progs cat chmod chown cp dd df disklabel ed expr fsck_ffs -progs ftp getopt -progs ifconfig init installboot less ln ls mkdir mknod mount mount_cd9660 -progs mount_ffs mount_nfs mount_kernfs -progs mv newfs pax ksh ping pwd reboot rm route -progs sed stty sync test tset umount -progs gzip - -ln chown chgrp -ln fsck_ffs fsck -ln less more -ln pax tar -ln ksh sh -ln ksh -sh # init invokes the shell this way -ln test [ -ln reboot halt - -libs -ledit -lutil -lcurses -lkrb -ldes -ll -lm - diff --git a/distrib/sparc/floppies/inst-common/instbin.conf b/distrib/sparc/floppies/inst-common/instbin.conf deleted file mode 100644 index 35bab5922bf..00000000000 --- a/distrib/sparc/floppies/inst-common/instbin.conf +++ /dev/null @@ -1,26 +0,0 @@ -# $OpenBSD: instbin.conf,v 1.16 1998/11/20 00:20:49 deraadt Exp $ -# -# kcbin.conf - unified binary for the kc floppy -# - -srcdirs distrib/special -srcdirs bin sbin usr.bin/less usr.bin usr.sbin gnu/usr.bin sys/arch/sparc/stand - -progs cat chmod chown cp dd df disklabel ed expr fsck_ffs -progs ftp getopt -progs ifconfig init installboot less ln ls mkdir mknod mount mount_cd9660 -progs mount_ffs mount_nfs mount_kernfs -progs mv newfs pax ksh ping pwd reboot rm route -progs sed stty sync test tset umount -progs rsh gzip - -ln chown chgrp -ln fsck_ffs fsck -ln less more -ln pax tar -ln ksh sh -ln ksh -sh # init invokes the shell this way -ln test [ -ln reboot halt - -libs -ledit -lutil -lcurses -ll -lm diff --git a/distrib/sparc/floppies/inst-common/list b/distrib/sparc/floppies/inst-common/list deleted file mode 100644 index 87b300b2df7..00000000000 --- a/distrib/sparc/floppies/inst-common/list +++ /dev/null @@ -1,82 +0,0 @@ -# $OpenBSD: list,v 1.14 1998/12/20 23:36:42 millert Exp $ - -# copy the crunched binary, link to it, and kill it -COPY ${OBJDIR}/instbin instbin -LINK instbin bin/cat -LINK instbin bin/chmod -LINK instbin bin/cp -LINK instbin bin/dd -LINK instbin bin/df -LINK instbin bin/ed -LINK instbin bin/expr -LINK instbin bin/ln -LINK instbin bin/ls -LINK instbin bin/mkdir -LINK instbin bin/mv -LINK instbin bin/pwd -LINK instbin bin/rm -LINK instbin bin/sh -LINK instbin bin/stty -LINK instbin bin/sync -LINK instbin bin/tar -LINK instbin bin/test -LINK instbin bin/[ -LINK instbin sbin/disklabel -LINK instbin sbin/fsck -LINK instbin sbin/fsck_ffs -LINK instbin sbin/halt -LINK instbin sbin/ifconfig -LINK instbin sbin/init -LINK instbin sbin/mknod -LINK instbin sbin/mount -LINK instbin sbin/mount_cd9660 -LINK instbin sbin/mount_ffs -#LINK instbin sbin/mount_msdos -LINK instbin sbin/mount_nfs -LINK instbin sbin/mount_kernfs -LINK instbin sbin/newfs -LINK instbin sbin/ping -LINK instbin sbin/reboot -LINK instbin sbin/route -#LINK instbin sbin/shutdown -#LINK instbin sbin/slattach -LINK instbin sbin/umount -SYMLINK /bin/cat usr/bin/chgrp -SYMLINK /bin/cat usr/bin/ftp -SYMLINK /bin/cat usr/bin/less -SYMLINK /bin/cat usr/bin/getopt -SYMLINK /bin/cat usr/bin/gzip -SYMLINK /bin/cat usr/bin/more -SYMLINK /bin/cat usr/bin/sed -SYMLINK /bin/cat usr/bin/tset -#SYMLINK /bin/cat usr/bin/tip -#SYMLINK /bin/cat usr/sbin/bad144 -SYMLINK /bin/cat usr/sbin/chown -SYMLINK /bin/cat usr/sbin/chroot -SYMLINK /bin/cat usr/sbin/installboot -# it's less confusing to leave instbin there and takes essentially no room. -# SPECIAL /bin/rm instbin -SPECIAL sync - -# copy the MAKEDEV script and make some devices -COPY ${DESTDIR}/dev/MAKEDEV dev/MAKEDEV -SPECIAL cd dev; sh ${DESTDIR}/dev/MAKEDEV floppy - -# we need the contents of /usr/mdec -#COPY /usr/mdec/boot usr/mdec/boot -#COPY /usr/mdec/bootxx usr/mdec/bootxx -#COPY /usr/mdec/binstall usr/mdec/binstall - -# various files that we need in /etc for the install -COPY ${DESTDIR}/etc/group etc/group -#COPY ${DESTDIR}/etc/master.passwd etc/master.passwd -#COPY ${DESTDIR}/etc/passwd etc/passwd -COPY ${DESTDIR}/etc/protocols etc/protocols -#COPY ${DESTDIR}/etc/pwd.db etc/pwd.db -COPY ${DESTDIR}/etc/services etc/services -#COPY ${DESTDIR}/etc/spwd.db etc/spwd.db - -# and the common installation tools -COPY ${TOPDIR}/inst-common/dot.commonutils .commonutils -# and a few useful bits of the termcap file (sun*, basic vt100, dumb, unknown) -SPECIAL tic -C ${CURDIR}/../../../../share/termtypes/termtypes.master | sed -n -e 's,/usr/share/lib/tabset,/usr/share/tabset,g' -e 's,/usr/lib/tabset,/usr/share/tabset,g' -e '/^dumb|/,/:[ ]*$/p' -e '/^unknown|/,/:[ ]*$/p' -e '/^sun.*|/,/:[ ]*$/p' -e '/^vt100|/,/:[ ]*$/p' > usr/share/misc/termcap diff --git a/distrib/sparc/floppies/inst-common/mtree.conf b/distrib/sparc/floppies/inst-common/mtree.conf deleted file mode 100644 index cd198f1f7f0..00000000000 --- a/distrib/sparc/floppies/inst-common/mtree.conf +++ /dev/null @@ -1,77 +0,0 @@ -# $OpenBSD: mtree.conf,v 1.4 1997/05/05 16:31:39 grr Exp $ - -/set type=dir uname=root gname=wheel mode=0755 -# . -. - -# ./bin -bin -# ./bin -.. - -# ./dev -dev -# ./dev -.. - -# ./etc -etc -# ./etc -.. - -# ./kern -kern -# ./kern -.. - -# ./mnt -mnt -# ./mnt -.. - -# ./mnt2 -#mnt2 -# ./mnt2 -.. - -# ./sbin -sbin -# ./sbin -.. - -# ./tmp -tmp -# ./tmp -.. - -# ./usr -usr - -# ./usr/bin -bin -# ./usr/bin -.. - -# ./usr/mdec -mdec -# ./usr/mdec -.. - -# ./usr/sbin -sbin -# ./usr/sbin -.. - -# ./usr/share -share - -# ./usr/share/misc -misc -# ./usr/share/misc -.. - -# ./usr/share -.. - -# ./usr -.. diff --git a/distrib/sparc/floppies/inst-common/termcap.pc3 b/distrib/sparc/floppies/inst-common/termcap.pc3 deleted file mode 100644 index d4880d0bf3e..00000000000 --- a/distrib/sparc/floppies/inst-common/termcap.pc3 +++ /dev/null @@ -1,14 +0,0 @@ -sun|sun1|sun2|Sun Microsystems Inc. workstation console:\ - :am:km:ms:\ - :co#80:li#34:\ - :%7=\E[194z:&5=\E[193z:&8=\E[195z:@7=\E[220z:AL=\E[%dL:\ - :DC=\E[%dP:DL=\E[%dM:F1=\E[234z:F2=\E[235z:IC=\E[%d@:\ - :K2=\E[218z:al=\E[L:bl=^G:cd=\E[J:ce=\E[K:cl=^L:\ - :cm=\E[%i%d;%dH:cr=^M:dc=\E[P:dl=\E[M:do=^J:ei=:ic=\E[@:im=:\ - :k1=\E[224z:k2=\E[225z:k3=\E[226z:k4=\E[227z:k5=\E[228z:\ - :k6=\E[229z:k7=\E[230z:k8=\E[231z:k9=\E[232z:k;=\E[233z:\ - :kD=\177:kN=\E[222z:kP=\E[216z:kb=^H:kd=\E[B:kh=\E[214z:\ - :kl=\E[D:kr=\E[C:ku=\E[A:le=^H:md=\E[1m:me=\E[m:mr=\E[7m:\ - :nd=\E[C:r2=\E[s:\ - :..sa=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m:\ - :se=\E[m:sf=^J:so=\E[7m:ta=^I:ue=\E[m:up=\E[A:us=\E[4m: diff --git a/distrib/sparc/floppies/inst/Makefile b/distrib/sparc/floppies/inst/Makefile deleted file mode 100644 index f9ba501b114..00000000000 --- a/distrib/sparc/floppies/inst/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# $OpenBSD: Makefile,v 1.3 1997/05/01 11:30:47 niklas Exp $ - -TOP= ${.CURDIR}/.. - -.include "${TOP}/Makefile.inc" -IMAGE= inst${REV}.fs - -.include "${TOP}/inst-common/Makefile.inc" diff --git a/distrib/sparc/floppies/inst/disktab.preinstall b/distrib/sparc/floppies/inst/disktab.preinstall deleted file mode 100644 index 7f56ff9afcd..00000000000 --- a/distrib/sparc/floppies/inst/disktab.preinstall +++ /dev/null @@ -1,31 +0,0 @@ -# $OpenBSD: disktab.preinstall,v 1.2 1997/05/01 11:30:48 niklas Exp $ - -# Disk geometry and partition layout tables. -# Key: -# dt controller type -# ty type of disk (fixed, removeable, simulated) -# d[0-4] drive-type-dependent parameters -# ns #sectors/track -# nt #tracks/cylinder -# nc #cylinders/disk -# sc #sectors/cylinder, nc*nt default -# su #sectors/unit, sc*nc default -# se sector size, DEV_BSIZE default -# rm rpm, 3600 default -# sf supports bad144-style bad sector forwarding -# sk sector skew per track, default 0 -# cs sector skew per cylinder, default 0 -# hs headswitch time, default 0 -# ts one-cylinder seek time, default 0 -# il sector interleave (n:1), 1 default -# bs boot block size, default BBSIZE -# sb superblock size, default SBSIZE -# o[a-h] partition offsets in sectors -# p[a-h] partition sizes in sectors -# b[a-h] partition block sizes in bytes -# f[a-h] partition fragment sizes in bytes -# t[a-h] partition types (filesystem, swap, etc) -# -# All partition sizes reserve space for bad sector tables. -# (5 cylinders needed for maintenance + replacement sectors) -# diff --git a/distrib/sparc/floppies/inst/dot.hdprofile b/distrib/sparc/floppies/inst/dot.hdprofile deleted file mode 100644 index cb84333776f..00000000000 --- a/distrib/sparc/floppies/inst/dot.hdprofile +++ /dev/null @@ -1,121 +0,0 @@ -# $OpenBSD: dot.hdprofile,v 1.5 1997/05/11 22:47:29 grr Exp $ -# -# Copyright (c) 1994 Christopher G. Demetriou -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. All advertising materials mentioning features or use of this software -# must display the following acknowledgement: -# This product includes software developed by Christopher G. Demetriou. -# 4. The name of the author may not be used to endorse or promote products -# derived from this software without specific prior written permission -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -PATH=/sbin:/bin:/usr/bin:/usr/sbin:/ -export PATH - -umask 022 - -# XXX -# the TERM/EDITOR stuff is really well enough parameterized to be moved -# into install.sub where it could use the routines there and be invoked -# from the various (semi) MI install and upgrade scripts - -# terminals believed to be in termcap, default TERM -TERMS="sun vt100 dumb" -TERM=sun - -# editors believed to be in $EDITBIN, smart and dumb defaults -EDITORS="ed" -EDITOR=ed -DUMB=ed -EDITBIN=/bin -EDITUBIN=/usr/bin - -if [ "X${DONEPROFILE}" = "X" ]; then - DONEPROFILE=YES - - echo "Checking filesystems..." - fsck -y - - echo "Mounting filesystems..." - mount -a - - # set up some sane defaults - echo 'erase ^?, werase ^W, kill ^U, intr ^C' - stty newcrt werase ^W intr ^C kill ^U erase ^? 9600 - echo '' - - # get the terminal type - _forceloop="" - while [ "X$_forceloop" = X"" ]; do - echo "Supported terminals are: $TERMS" - eval `tset -s -m ":?$TERM"` - if [ "X$TERM" != X"unknown" ]; then - _forceloop="done" - fi - done - export TERM - - # get the editor preference - if [ "X$TERM" = "Xdumb" -o "X$TERM" = "Xunknown" ]; then - echo -n "$TERM can't handle $EDITOR" - EDITOR="$DUMB" - echo ", using $EDITOR as text editor!" - elif [ "X$EDITOR" = "X$EDITORS" ]; then - echo "Only one editor available, you get to use $EDITOR!" - else - _forceloop="" - while [ "X$_forceloop" = X"" ]; do - echo "Supported editors are: $EDITORS" - echo -n "text editor? [$EDITOR] " - read _choice - if [ "X$_choice" = "X" ]; then - _choice="$EDITOR" - _forceloop="$_choice" - else - for _editor in $EDITORS; do - if [ "X$_choice" = "X$_editor" ]; then - _forceloop="$_choice" - break - fi - done - fi - if [ "X$_forceloop" != "X" -a ! \( -x $EDITBIN/$_choice - -o -x $EDITUBIN/$_choice \) ] - then - _forceloop="" - fi - if [ "X$_forceloop" = "X" ]; then - echo "Sorry, $_choice isn't available." - _forceloop="" - fi - done - EDITOR="$_choice" - fi - export EDITOR - - # pull in the functions that people will use from the shell prompt. - . /.commonutils - . /.instutils - - echo "Follow the installation directions to install the OpenBSD" - echo "distribution sets." -fi diff --git a/distrib/sparc/floppies/inst/dot.instutils b/distrib/sparc/floppies/inst/dot.instutils deleted file mode 100644 index 496c10f1726..00000000000 --- a/distrib/sparc/floppies/inst/dot.instutils +++ /dev/null @@ -1,156 +0,0 @@ -# $OpenBSD: dot.instutils,v 1.2 1996/04/25 21:31:16 niklas Exp $ -# -# Copyright (c) 1994 Christopher G. Demetriou -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. All advertising materials mentioning features or use of this software -# must display the following acknowledgement: -# This product includes software developed by Christopher G. Demetriou. -# 4. The name of the author may not be used to endorse or promote products -# derived from this software without specific prior written permission -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -# Installation configuration utilites (functions), to get OpenBSD configured -# reasonably once it is installed on the hard disk. These are meant to be -# invoked from the shell prompt, by people installing OpenBSD. - -Configure() -{ - DEV=/dev - ETC=/etc - if [ ! -f /etc/fstab ]; then - DEV=/mnt/dev - ETC=/mnt/etc - fi - - echo "You will now be prompted for information about this" - echo "machine. If you hit return, the default answer (in" - echo "brackets) will be used." - - echo "" - echo -n "What is this machine's hostname? [unknown.host.domain] " - read hname - if [ "$hname" = "" ]; then - hname=unknown.host.domain - fi - echo $hname > ${ETC}/myname - proto_domain=`echo $hname | sed -e 's/[^.]*\.//'` - - echo "" - echo "What domain is this machine in (this is NOT its YP" - echo -n "domain name)? [$proto_domain] " - read dname - if [ "$dname" = "" ]; then - dname=$proto_domain - fi - - echo "" - if [ -e $ETC/sendmail.cf ]; then - echo "WARNING: A default sendmail.cf exists, and probably" - echo "needs to be tuned and/or replaced, to work properly at" - echo "your site!" - else - echo "WARNING: No default sendmail.cf installed. Did you" - echo "forget to install the 'etc' distribution?" - fi - - echo "127.0.0.1 localhost localhost.$dname" > ${ETC}/hosts - - echo "" - echo -n "Does this machine have an ethernet interface? [y] " - read resp - case "$resp" in - n*) - ;; - *) - intf= - while [ "$intf" = "" ]; do - echo -n "What is the primary interface name " - echo -n "(e.g. ed0, ep0, etc)? " - read intf - done - echo -n "What is the hostname for this interface? [$hname] " - read ifname - if [ "$ifname" = "" ]; then - ifname=$hname - fi - ifaddr= - while [ "$ifaddr" = "" ]; do - echo -n "What is the IP address associated with " - echo -n "interface ${intf}? " - read ifaddr - done - echo "$ifaddr $ifname `echo $ifname | sed -e s/\.$dname//`" \ - >> ${ETC}/hosts - - echo -n "Does this interface have a special netmask? [n] " - read resp - case "$resp" in - y*) - echo -n "What is the netmask? [0xffffff00] " - read ifnetmask - if [ "$ifnetmask" = "" ]; then - ifnetmask=0xffffff00 - fi - ;; - *) - ifnetmask= - ;; - esac - - echo -n "Does this interface need additional flags? [n] " - read resp - case "$resp" in - y*) - echo -n "What flags? [link0] " - read ifflags - if [ "$ifflags" = "" ]; then - ifflags=link0 - fi - ;; - *) - ifflags= - ;; - esac - echo "inet $ifname $ifnetmask $ifflags" > ${ETC}/hostname.$intf - - echo "" - echo -n "WARNING: if you have any more ethernet interfaces, " - echo "you will have to configure" - echo -n "them by hand. Read the comments in /etc/netstart to " - echo "learn how to do this." - ;; - esac - - echo "" - echo -n "Making device nodes (may take a while)..." - cd ${DEV} - sh MAKEDEV all - echo " done." - - sync - - echo "" - echo "If you haven't already installed a kernel on the hard drive" - echo "using your kernel-copy floppy, do so now. Kernel" - echo "installation instructions can be found in the" - echo "installation notes." -} diff --git a/distrib/sparc/floppies/inst/dot.profile b/distrib/sparc/floppies/inst/dot.profile deleted file mode 100644 index f69670e4365..00000000000 --- a/distrib/sparc/floppies/inst/dot.profile +++ /dev/null @@ -1,122 +0,0 @@ -# $OpenBSD: dot.profile,v 1.7 2000/01/30 01:21:22 deraadt Exp $ -# -# Copyright (c) 1994 Christopher G. Demetriou -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. All advertising materials mentioning features or use of this software -# must display the following acknowledgement: -# This product includes software developed by Christopher G. Demetriou. -# 4. The name of the author may not be used to endorse or promote products -# derived from this software without specific prior written permission -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# - -export PATH=/sbin:/bin:/usr/bin:/usr/sbin:/ -export HISTFILE=/.sh_history - -umask 022 - -set -o emacs # emacs-style command line editing -alias dmesg="cat /kern/msgbuf" - -# XXX -# the TERM/EDITOR stuff is really well enough parameterized to be moved -# into install.sub where it could use the routines there and be invoked -# from the various (semi) MI install and upgrade scripts - -# terminals believed to be in termcap, default TERM -TERMS="sun vt100 dumb" -TERM=sun - -# editors believed to be in $EDITBIN, smart and dumb defaults -EDITORS="ed" -EDITOR=ed -DUMB=ed -EDITBIN=/bin - -if [ "X${DONEPROFILE}" = "X" ]; then - DONEPROFILE=YES - - # mount kernfs and re-mount the boot media (perhaps r/w) - mount_kernfs /kern /kern - mount_ffs -o update /kern/rootdev / - - # set up some sane defaults - echo 'erase ^H, werase ^W, kill ^U, intr ^C' - stty newcrt werase ^W intr ^C kill ^U erase ^H 9600 - - # get the terminal type - _forceloop="" - while [ "X$_forceloop" = X"" ]; do - echo "Supported terminals are: $TERMS" - eval `tset -s -m ":?$TERM"` - if [ "X$TERM" != X"unknown" ]; then - _forceloop="done" - fi - done - export TERM - - # get the editor preference - if [ "X$TERM" = "Xdumb" -o "X$TERM" = "Xunknown" ]; then - echo -n "$TERM can't handle $EDITOR" - EDITOR="$DUMB" - echo ", using $EDITOR as text editor!" - elif [ "X$EDITOR" = "X$EDITORS" ]; then - echo "Only one editor available, you get to use $EDITOR!" - else - _forceloop="" - while [ "X$_forceloop" = X"" ]; do - echo "Supported editors are: $EDITORS" - echo -n "text editor? [$EDITOR] " - read _choice - if [ "X$_choice" = "X" ]; then - _choice="$EDITOR" - _forceloop="$_choice" - else - for _editor in $EDITORS; do - if [ "X$_choice" = "X$_editor" ]; then - _forceloop="$_choice" - break - fi - done - fi - if [ "X$_forceloop" != "X" -a ! -x $EDITBIN/$_choice ] - then - _forceloop="" - fi - if [ "X$_forceloop" = "X" ]; then - echo "Sorry, $_choice isn't available." - _forceloop="" - fi - done - EDITOR="$_choice" - fi - export EDITOR - - # pull in the functions that people will use from the shell prompt. - . /.commonutils - . /.instutils - - # run the installation script. - install - -fi - diff --git a/distrib/sparc/floppies/inst/install.sh b/distrib/sparc/floppies/inst/install.sh deleted file mode 100644 index f0cc0bf45fd..00000000000 --- a/distrib/sparc/floppies/inst/install.sh +++ /dev/null @@ -1,616 +0,0 @@ -#!/bin/sh -# $OpenBSD: install.sh,v 1.12 1998/11/03 04:17:21 aaron Exp $ -# -# Copyright (c) 1994 Christopher G. Demetriou -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. All advertising materials mentioning features or use of this software -# must display the following acknowledgement: -# This product includes software developed by Christopher G. Demetriou. -# 4. The name of the author may not be used to endorse or promote products -# derived from this software without specific prior written permission -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -# OpenBSD installation script. -# In a perfect world, this would be a nice C program, with a reasonable -# user interface. - -DT=/etc/disktab # /etc/disktab -FSTABDIR=/mnt/etc # /mnt/etc -MSGBUF=/kern/msgbuf # message buffer vs. dmesg -#DONTDOIT=echo - -VERSION=2.0 -FSTAB=${FSTABDIR}/fstab - -getresp() { - read resp - if [ "X$resp" = "X" ]; then - resp=$1 - fi -} - -echo "Welcome to the OpenBSD ${VERSION} installation program." -echo "" -echo "This program is will put OpenBSD on your hard disk. It is not" -echo "painless, but it could be worse. You'll be asked several questions," -echo "and it would probably be useful to have your disk's hardware" -echo "manual, the installation notes, and a calculator handy." -echo "" -echo "In particular, you will need to know some reasonably detailed" -echo "information about your disk's geometry, because there is currently" -echo "no way this this program can figure that information out." -echo "" -echo "As with anything which modifies your hard drive's contents, this" -echo "program can cause SIGNIFICANT data loss, and you are advised" -echo "to make sure your hard drive is backed up before beginning the" -echo "installation process." -echo "" -echo "Default answers are displyed in brackets after the questions." -echo "You can hit Control-C at any time to quit, but if you do so at a" -echo "prompt, you may have to hit return. Also, quitting in the middle of" -echo "installation may leave your system in an inconsistent state." -echo "" -echo -n "Proceed with installation? [n] " -getresp "n" -case "$resp" in -y*|Y*) - echo "Cool! Let's get to it..." - ;; -*) - echo "OK, then. Enter 'halt' at the prompt to halt the" - echo "machine. Once the machine has halted, remove the" - echo "floppy and press any key to reboot." - exit - ;; -esac - -echo "" -echo "To do the installation, you'll need to provide some information about" -echo "your disk." - - drivetype=sd - sect_fwd="" - type=SCSI - -# find out what units are possible for that disk, and query the user. -driveunits=`ls /dev/${drivetype}?a | sed -e 's,/dev/\(...\)a,\1,g'` -if [ "X${driveunits}" = "X" ]; then - echo "FATAL ERROR:" - echo "No devices for disks of type '${drivetype}'." - echo "This is probably a bug in the install disks." - echo "Exiting install program." - exit -fi -prefdrive=${drivetype}0 - -echo "The following ${drivetype}-type disks are supported by this" -echo "installation procedure:" -echo "${driveunits}" -echo "Note that they may not exist in _your_ machine; the list of" -echo "disks in your machine was printed when the system was booting." -while [ "X${drivename}" = "X" ]; do - echo -n "Which disk would like to install on? [${prefdrive}] " - getresp ${prefdrive} - otherdrives=`echo "${driveunits}" | sed -e s,${resp},,` - if [ "X${driveunits}" = "X${otherdrives}" ]; then - echo "\"${resp}\" is an invalid drive name. Valid choices" - echo "are: "${driveunits} - else - drivename=${resp} - fi -done - -echo "" -echo "Using disk ${drivename}." -echo -n "What kind of disk is it? (one word please) [my${drivetype}] " -getresp "my${drivetype}" -labelname=$resp - -echo "" -echo "You will now need to provide some information about your disk's" -echo "geometry. This should either be in the User's Manual for your disk," -echo "or you should have written down what OpenBSD printed when booting." -echo "(Note that he geometry that's printed at boot time is preferred.)" -echo "" -echo "You may choose to view the initial boot messages for your system" -echo "again right now if you like." -echo -n "View the boot messages again? [n] " -getresp "n" -case "$resp" in -y*|Y*) - less -rsS $MSGBUF - ;; -*) - echo "" - ;; -esac - -echo "You will now enter the disk geometry information" -echo "" - -# 1st arg is 1 more than arg needed -args () -{ - eval echo \$\{$1\} -} - -bytes_per_sect=`cat $MSGBUF | sed -n -e /^${drivename}:/p -e /^${drivename}:/q` -bytes_per_sect=`args 10 $bytes_per_sect` - -echo -n "Number of bytes per disk sector? [$bytes_per_sect] " -getresp $bytes_per_sect -bytes_per_sect="$resp" - -cyls_per_disk=`cat $MSGBUF | sed -n -e /^${drivename}:/p -e /^${drivename}:/q` -cyls_per_disk=`args 4 $cyls_per_disk` - -echo -n "Number of disk cylinders? [$cyls_per_disk]" -getresp $cyls_per_disk -cyls_per_disk="$resp" - -tracks_per_cyl=`cat $MSGBUF | sed -n -e /^${drivename}:/p -e /^${drivename}:/q` -tracks_per_cyl=`args 6 $tracks_per_cyl` - -echo -n "Number of disk tracks (heads) per disk cylinder? [$tracks_per_cyl]" -getresp $tracks_per_cyl -tracks_per_cyl="$resp" - -sects_per_track=`sed -n -e /^${drivename}:/p -e /^${drivename}:/q $MSGBUF` -sects_per_track=`args 8 $sects_per_track` - -echo -n "Number of disk sectors per disk track? [$sects_per_track]" -getresp $sects_per_track -sects_per_track="$resp" - -cylindersize=`expr $sects_per_track \* $tracks_per_cyl` -cylbytes=`expr $cylindersize \* $bytes_per_sect` -disksize=`expr $cylindersize \* $cyls_per_disk` - -echo "" -echo "Your disk has a total of $disksize $bytes_per_sect byte sectors," -echo "arranged as $cyls_per_disk cylinders which contain $cylindersize " -echo "sectors ($cylbytes bytes) each." -echo "" -echo "You can specify partition sizes in cylinders ('c') or sectors ('s')." -while [ "X${sizemult}" = "X" ]; do - echo -n "What units would you like to use? [cylinders] " - getresp cylinders - case "$resp" in - c*|C*) - sizemult=$cylindersize - sizeunit="cylinders" - maxdisk=$cyls_per_disk - ;; - s*|S*) - sizemult=1 - sizeunit="sectors" - maxdisk=$disksize; - ;; - *) - echo "Enter cylinders ('c') or sectors ('s')." - ;; - esac -done - -echo -n "" -echo -n "Size of OpenBSD portion of disk (in $sizeunit) ? [$maxdisk] " -getresp "$maxdisk" -partition=$resp -partition_sects=`expr $resp \* $sizemult` -part_offset=0 -if [ $partition_sects -lt $disksize ]; then - echo -n "Offset of OpenBSD portion of disk (in $sizeunit)? " - getresp - part_offset=$resp -fi -badspacesec=0 -if [ "$sect_fwd" = "sf:" ]; then - badspacecyl=`expr $sects_per_track + 126` - badspacecyl=`expr $badspacecyl + $cylindersize - 1` - badspacecyl=`expr $badspacecyl / $cylindersize` - badspacesec=`expr $badspacecyl \* $cylindersize` - echo "" - echo -n "Using $badspacesec sectors ($badspacecyl cylinders) for the " - echo "bad144 bad block table" -fi - -sects_left=`expr $partition_sects - $badspacesec` -units_left=`expr $sects_left / $sizemult` -echo "" -echo "There are $units_left $sizeunit left to allocate." -echo "" -root=0 -while [ $root -eq 0 ]; do - echo -n "Root partition size (in $sizeunit)? " - getresp - case $resp in - [1-9]*) - total=$resp - if [ $total -gt $units_left ]; then - echo -n "Root size is greater than remaining " - echo "free space on disk." - else - root=$resp - fi - ;; - esac -done -root_offset=$part_offset -part_used=`expr $root + $badspacesec / $sizemult` -units_left=`expr $partition - $part_used` -echo "" - -swap=0 -while [ $swap -eq 0 ]; do - echo "$units_left $sizeunit remaining in OpenBSD portion of disk." - echo -n "Swap partition size (in $sizeunit)? " - getresp - case $resp in - [1-9]*) - if [ $swap -gt $units_left ]; then - echo -n "Swap size is greater than remaining " - echo "free space on disk." - else - swap=$resp - fi - ;; - esac -done -swap_offset=`expr $root_offset + $root` -part_used=`expr $part_used + $swap` -echo "" - -fragsize=1024 -blocksize=8192 -cat /etc/disktab.preinstall > $DT -echo "" >> $DT -echo "$labelname|OpenBSD installation generated:\\" >> $DT -echo " :dt=${type}:ty=winchester:\\" >> $DT -echo -n " :nc#${cyls_per_disk}:ns#${sects_per_track}" >> $DT -echo ":nt#${tracks_per_cyl}:\\" >> $DT -echo " :se#${bytes_per_sect}:${sect_fwd}\\" >> $DT -_size=`expr $root \* $sizemult` -_offset=`expr $root_offset \* $sizemult` -echo -n " :pa#${_size}:oa#${_offset}" >> $DT -echo ":ta=4.2BSD:ba#${blocksize}:fa#${fragsize}:\\" >> $DT -_size=`expr $swap \* $sizemult` -_offset=`expr $swap_offset \* $sizemult` -echo " :pb#${_size}:ob#${_offset}:tb=swap:\\" >> $DT -echo " :pc#${disksize}:oc#0:\\" >> $DT - -echo "You will now have to enter information about any other partitions" -echo "to be created in the OpenBSD portion of the disk. This process will" -echo "be complete when you've filled up all remaining space in the OpenBSD" -echo "portion of the disk." - -while [ $part_used -lt $partition ]; do - part_size=0 - units_left=`expr $partition - $part_used` - while [ $part_size -eq 0 ]; do - echo "" - echo -n "$units_left $sizeunit remaining in OpenBSD portion of " - echo "the disk" - echo -n "Next partition size (in $sizeunit) [$units_left] ? " - getresp "$units_left" - case $resp in - [1-9]*) - total=`expr $part_used + $resp` - if [ $total -gt $partition ]; then - echo "That would make the partition too large to fit!" - else - part_size=$resp - part_used=$total - part_name="" - while [ "$part_name" = "" ]; do - echo -n "Mount point? " - getresp - part_name=$resp - done - fi - ;; - esac - done - # XXX we skip partition d to avoid user confusion - if [ "$ename" = "" ]; then - ename=$part_name - offset=`expr $part_offset + $root + $swap` - _size=`expr $part_size \* $sizemult` - _offset=`expr $offset \* $sizemult` - echo -n " :pe#${_size}:oe#${_offset}" >> $DT - echo ":te=4.2BSD:be#${blocksize}:fe#${fragsize}:\\" >> $DT - offset=`expr $offset + $part_size` - elif [ "$fname" = "" ]; then - fname=$part_name - _size=`expr $part_size \* $sizemult` - _offset=`expr $offset \* $sizemult` - echo -n " :pf#${_size}:of#${_offset}" >> $DT - echo ":tf=4.2BSD:bf#${blocksize}:ff#${fragsize}:\\" >> $DT - offset=`expr $offset + $part_size` - elif [ "$gname" = "" ]; then - gname=$part_name - _size=`expr $part_size \* $sizemult` - _offset=`expr $offset \* $sizemult` - echo -n " :pg#${_size}:og#${_offset}" >> $DT - echo ":tg=4.2BSD:bg#${blocksize}:fg#${fragsize}:\\" >> $DT - offset=`expr $offset + $part_size` - elif [ "$hname" = "" ]; then - hname=$part_name - _size=`expr $part_size \* $sizemult` - _offset=`expr $offset \* $sizemult` - echo -n " :ph#${_size}:oh#${_offset}" >> $DT - echo ":th=4.2BSD:bh#${blocksize}:fh#${fragsize}:\\" >> $DT - part_used=$partition - elif [ "$iname" = "" ]; then - iname=$part_name - _size=`expr $part_size \* $sizemult` - _offset=`expr $offset \* $sizemult` - echo -n " :pi#${_size}:oi#${_offset}" >> $DT - echo ":ti=4.2BSD:bi#${blocksize}:fi#${fragsize}:\\" >> $DT - part_used=$partition - elif [ "$jname" = "" ]; then - jname=$part_name - _size=`expr $part_size \* $sizemult` - _offset=`expr $offset \* $sizemult` - echo -n " :pj#${_size}:oj#${_offset}" >> $DT - echo ":tj=4.2BSD:bj#${blocksize}:fj#${fragsize}:\\" >> $DT - part_used=$partition - elif [ "$kname" = "" ]; then - kname=$part_name - _size=`expr $part_size \* $sizemult` - _offset=`expr $offset \* $sizemult` - echo -n " :pk#${_size}:ok#${_offset}" >> $DT - echo ":tk=4.2BSD:bk#${blocksize}:fk#${fragsize}:\\" >> $DT - part_used=$partition - elif [ "$lname" = "" ]; then - lname=$part_name - _size=`expr $part_size \* $sizemult` - _offset=`expr $offset \* $sizemult` - echo -n " :pl#${_size}:ol#${_offset}" >> $DT - echo ":tl=4.2BSD:bl#${blocksize}:fl#${fragsize}:\\" >> $DT - part_used=$partition - elif [ "$mname" = "" ]; then - mname=$part_name - _size=`expr $part_size \* $sizemult` - _offset=`expr $offset \* $sizemult` - echo -n " :pm#${_size}:om#${_offset}" >> $DT - echo ":tm=4.2BSD:bm#${blocksize}:fm#${fragsize}:\\" >> $DT - part_used=$partition - elif [ "$nname" = "" ]; then - nname=$part_name - _size=`expr $part_size \* $sizemult` - _offset=`expr $offset \* $sizemult` - echo -n " :pn#${_size}:on#${_offset}" >> $DT - echo ":tn=4.2BSD:bn#${blocksize}:fn#${fragsize}:\\" >> $DT - part_used=$partition - elif [ "$oname" = "" ]; then - oname=$part_name - _size=`expr $part_size \* $sizemult` - _offset=`expr $offset \* $sizemult` - echo -n " :po#${_size}:oo#${_offset}" >> $DT - echo ":to=4.2BSD:bo#${blocksize}:fo#${fragsize}:\\" >> $DT - part_used=$partition - elif [ "$pname" = "" ]; then - pname=$part_name - _size=`expr $part_size \* $sizemult` - _offset=`expr $offset \* $sizemult` - echo -n " :pp#${_size}:op#${_offset}" >> $DT - echo ":tp=4.2BSD:bp#${blocksize}:fp#${fragsize}:\\" >> $DT - part_used=$partition - fi -done -echo "" >> $DT -sync - -echo "" -echo "THIS IS YOUR LAST CHANCE!!!" -echo "" -echo -n "Are you SURE you want OpenBSD installed on your hard drive? (yes/no) " -answer="" -while [ "$answer" = "" ]; do - getresp - case $resp in - yes|YES) - echo "" - echo "Here we go..." - answer=yes - ;; - no|NO) - echo "" - echo -n "OK, then. enter 'halt' to halt the machine. " - echo "Once the machine has halted," - echo -n "remove the floppy, and press any key to " - echo "reboot." - exit - ;; - *) - echo -n "I want a yes or no answer... well? " - ;; - esac -done - -echo "" -echo -n "Labeling disk $drivename..." -$DONTDOIT disklabel -w $drivename $labelname -echo " done." - -if [ "$sect_fwd" = "sf:" ]; then - echo -n "Initializing bad144 badblock table..." - $DONTDOIT bad144 $drivename 0 - echo " done." -fi - -echo "Initializing root filesystem, and mounting..." -$DONTDOIT newfs /dev/r${drivename}a -$DONTDOIT mount -v /dev/${drivename}a /mnt -if [ "$ename" != "" ]; then - echo "" - echo "Initializing $ename filesystem, and mounting..." - $DONTDOIT newfs /dev/r${drivename}e - $DONTDOIT mkdir -p /mnt/$ename - $DONTDOIT mount -v /dev/${drivename}e /mnt/$ename -fi - -echo "Installing boot block in root filesystem..." -$DONTDOIT /usr/mdec/binstall -v ffs /mnt - -if [ "$fname" != "" ]; then - echo "" - echo "Initializing $fname filesystem, and mounting..." - $DONTDOIT newfs /dev/r${drivename}f - $DONTDOIT mkdir -p /mnt/$fname - $DONTDOIT mount -v /dev/${drivename}f /mnt/$fname -fi -if [ "$gname" != "" ]; then - echo "" - echo "Initializing $gname filesystem, and mounting..." - $DONTDOIT newfs /dev/r${drivename}g - $DONTDOIT mkdir -p /mnt/$gname - $DONTDOIT mount -v /dev/${drivename}g /mnt/$gname -fi -if [ "$hname" != "" ]; then - echo "" - echo "Initializing $hname filesystem, and mounting..." - $DONTDOIT newfs /dev/r${drivename}h - $DONTDOIT mkdir -p /mnt/$hname - $DONTDOIT mount -v /dev/${drivename}h /mnt/$hname -fi -if [ "$iname" != "" ]; then - echo "" - echo "Initializing $iname filesystem, and mounting..." - $DONTDOIT newfs /dev/r${drivename}i - $DONTDOIT mkdir -p /mnt/$iname - $DONTDOIT mount -v /dev/${drivename}i /mnt/$iname -fi -if [ "$jname" != "" ]; then - echo "" - echo "Initializing $jname filesystem, and mounting..." - $DONTDOIT newfs /dev/r${drivename}j - $DONTDOIT mkdir -p /mnt/$jname - $DONTDOIT mount -v /dev/${drivename}j /mnt/$jname -fi -if [ "$kname" != "" ]; then - echo "" - echo "Initializing $kname filesystem, and mounting..." - $DONTDOIT newfs /dev/r${drivename}k - $DONTDOIT mkdir -p /mnt/$kname - $DONTDOIT mount -v /dev/${drivename}k /mnt/$kname -fi -if [ "$lname" != "" ]; then - echo "" - echo "Initializing $lname filesystem, and mounting..." - $DONTDOIT newfs /dev/r${drivename}l - $DONTDOIT mkdir -p /mnt/$lname - $DONTDOIT mount -v /dev/${drivename}l /mnt/$lname -fi -if [ "$mname" != "" ]; then - echo "" - echo "Initializing $mname filesystem, and mounting..." - $DONTDOIT newfs /dev/r${drivename}m - $DONTDOIT mkdir -p /mnt/$mname - $DONTDOIT mount -v /dev/${drivename}m /mnt/$mname -fi -if [ "$nname" != "" ]; then - echo "" - echo "Initializing $nname filesystem, and mounting..." - $DONTDOIT newfs /dev/r${drivename}n - $DONTDOIT mkdir -p /mnt/$nname - $DONTDOIT mount -v /dev/${drivename}n /mnt/$nname -fi -if [ "$oname" != "" ]; then - echo "" - echo "Initializing $oname filesystem, and mounting..." - $DONTDOIT newfs /dev/r${drivename}o - $DONTDOIT mkdir -p /mnt/$oname - $DONTDOIT mount -v /dev/${drivename}o /mnt/$oname -fi -if [ "$pname" != "" ]; then - echo "" - echo "Initializing $pname filesystem, and mounting..." - $DONTDOIT newfs /dev/r${drivename}p - $DONTDOIT mkdir -p /mnt/$pname - $DONTDOIT mount -v /dev/${drivename}p /mnt/$pname -fi - -echo "" -echo "Populating filesystems with bootstrapping binaries and config files" -$DONTDOIT tar -cXf - . | (cd /mnt ; tar -xpf - ) -$DONTDOIT cp /tmp/.hdprofile /mnt/.profile - -echo "" -echo -n "Creating an fstab..." -echo /dev/${drivename}a / ffs rw 1 1 | sed -e s,//,/, > $FSTAB -if [ "$ename" != "" ]; then - echo /dev/${drivename}e /$ename ffs rw 1 2 | sed -e s,//,/, >> $FSTAB -fi -if [ "$fname" != "" ]; then - echo /dev/${drivename}f /$fname ffs rw 1 3 | sed -e s,//,/, >> $FSTAB -fi -if [ "$gname" != "" ]; then - echo /dev/${drivename}g /$gname ffs rw 1 4 | sed -e s,//,/, >> $FSTAB -fi -if [ "$hname" != "" ]; then - echo /dev/${drivename}h /$hname ffs rw 1 5 | sed -e s,//,/, >> $FSTAB -fi -if [ "$iname" != "" ]; then - echo /dev/${drivename}i /$iname ffs rw 1 5 | sed -e s,//,/, >> $FSTAB -fi -if [ "$jname" != "" ]; then - echo /dev/${drivename}j /$jname ffs rw 1 5 | sed -e s,//,/, >> $FSTAB -fi -if [ "$kname" != "" ]; then - echo /dev/${drivename}k /$kname ffs rw 1 5 | sed -e s,//,/, >> $FSTAB -fi -if [ "$lname" != "" ]; then - echo /dev/${drivename}l /$lname ffs rw 1 5 | sed -e s,//,/, >> $FSTAB -fi -if [ "$mname" != "" ]; then - echo /dev/${drivename}m /$mname ffs rw 1 5 | sed -e s,//,/, >> $FSTAB -fi -if [ "$nname" != "" ]; then - echo /dev/${drivename}n /$nname ffs rw 1 5 | sed -e s,//,/, >> $FSTAB -fi -if [ "$oname" != "" ]; then - echo /dev/${drivename}o /$oname ffs rw 1 5 | sed -e s,//,/, >> $FSTAB -fi -if [ "$pname" != "" ]; then - echo /dev/${drivename}p /$pname ffs rw 1 5 | sed -e s,//,/, >> $FSTAB -fi - -sync -echo " done." - -echo "OK! The preliminary work of setting up your disk is now complete." -echo "" -echo "The remaining tasks are:" -echo "" -echo "To copy a OpenBSD kernel to the hard drive's root filesystem." -echo "Once accomplished, you can boot off the hard drive." -echo "" -echo "To load and install the OpenBSD distribution sets." -echo "Currently the hard drive's root filesystem is mounted on /mnt" -echo "" -echo "Consult the installation notes which will describe how to" -echo "install the distribution sets and kernel. Post-installation" -echo "configuration is also discussed therein." -echo "" -echo "GOOD LUCK!" -echo "" diff --git a/distrib/sparc/floppies/inst/list b/distrib/sparc/floppies/inst/list deleted file mode 100644 index 692cbdb8ce5..00000000000 --- a/distrib/sparc/floppies/inst/list +++ /dev/null @@ -1,16 +0,0 @@ -# $OpenBSD: list,v 1.6 1997/05/11 22:47:31 grr Exp $ - -# the disktab explanation file -COPY disktab.preinstall etc/disktab.preinstall - -# and the installation tools -COPY dot.profile .profile -COPY dot.instutils .instutils -COPY install.sh install -COPY dot.hdprofile tmp/.hdprofile - -# we need the contents of /usr/mdec -COPYDIR ${DESTDIR}/usr/mdec usr/mdec - -# make install executable -SPECIAL chmod 755 install diff --git a/distrib/sparc/floppies/kernel/Makefile b/distrib/sparc/floppies/kernel/Makefile deleted file mode 100644 index 61d220f8108..00000000000 --- a/distrib/sparc/floppies/kernel/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# $OpenBSD: Makefile,v 1.13 1998/02/09 06:15:56 deraadt Exp $ - -.include "../Makefile.inc" - -MOUNT_POINT?= /mnt -VND?= svnd0 -VND_DEV= /dev/${VND}a -VND_RDEV= /dev/r${VND}a -IMAGE= kc${REV}.fs -PID!= echo $$$$ -REALIMAGE!= echo /var/tmp/image.${PID} -MDEC= ${DESTDIR}/usr/mdec - -LISTS= ${.CURDIR}/list - -bsd: - cd ${.CURDIR}/../../../../sys/arch/sparc/conf && config FLOPPY - cd ${.CURDIR}/../../../../sys/arch/sparc/compile/FLOPPY && \ - make clean && make depend && make - cp ${.CURDIR}/../../../../sys/arch/sparc/compile/FLOPPY/bsd bsd - -all: bsd - dd if=/dev/zero of=${REALIMAGE} bs=10k count=144 - vnconfig -v -c ${VND} ${REALIMAGE} - disklabel -w ${VND} floppy - newfs -O -m 0 -o space -i 20480 -c 80 ${VND_RDEV} - mount ${VND_DEV} ${MOUNT_POINT} - sync; /usr/mdec/binstall -v ffs ${MOUNT_POINT} - TOPDIR=${.CURDIR}/.. CURDIR=${.CURDIR} OBJDIR=${.OBJDIR} \ - TARGDIR=${MOUNT_POINT} sh ${.CURDIR}/../runlist.sh ${LISTS} - mtree -def ${.CURDIR}/mtree.conf -p ${MOUNT_POINT}/ -u - df -i ${MOUNT_POINT} - umount ${MOUNT_POINT} - vnconfig -u ${VND} - cp ${REALIMAGE} ${IMAGE} - rm ${REALIMAGE} - -unconfig: - -umount -f ${MOUNT_POINT} - -vnconfig -u ${VND} - -/bin/rm -f ${IMAGE} - -clean cleandir: - /bin/rm -f ${IMAGE} bsd - -beforeinstall: - cp ${IMAGE} ${DESTDIR}/snapshot - -.include -.include diff --git a/distrib/sparc/floppies/kernel/list b/distrib/sparc/floppies/kernel/list deleted file mode 100644 index 66343b63e9f..00000000000 --- a/distrib/sparc/floppies/kernel/list +++ /dev/null @@ -1,4 +0,0 @@ -# $OpenBSD: list,v 1.4 1997/05/01 11:30:55 niklas Exp $ - -# copy the kernel -COPY ${OBJDIR}/bsd bsd diff --git a/distrib/sparc/floppies/kernel/mtree.conf b/distrib/sparc/floppies/kernel/mtree.conf deleted file mode 100644 index 11c2bf83503..00000000000 --- a/distrib/sparc/floppies/kernel/mtree.conf +++ /dev/null @@ -1,6 +0,0 @@ -# $OpenBSD: mtree.conf,v 1.2 1997/05/01 11:30:56 niklas Exp $ - -/set type=dir uname=root gname=wheel mode=0755 -# . -. - diff --git a/distrib/sparc/floppies/list2sh.awk b/distrib/sparc/floppies/list2sh.awk deleted file mode 100644 index 42c3c54505e..00000000000 --- a/distrib/sparc/floppies/list2sh.awk +++ /dev/null @@ -1,60 +0,0 @@ -# $OpenBSD: list2sh.awk,v 1.3 1997/05/05 16:31:37 grr Exp $ - -BEGIN { - printf("cd ${CURDIR}\n"); - printf("\n"); -} -/^$/ || /^#/ { - print $0; - next; -} -$1 == "COPY" { - printf("echo '%s'\n", $0); - printf("rm -f ${TARGDIR}/%s\n", $3); - printf("cp %s ${TARGDIR}/%s\n", $2, $3); - next; -} -$1 == "LINK" { - printf("echo '%s'\n", $0); - printf("rm -f ${TARGDIR}/%s\n", $3); - printf("(cd ${TARGDIR}; ln %s %s)\n", $2, $3); - next; -} -$1 == "SYMLINK" { - printf("echo '%s'\n", $0); - printf("rm -f ${TARGDIR}/%s\n", $3); - printf("(cd ${TARGDIR}; ln -s %s %s)\n", $2, $3); - next; -} -$1 == "COPYDIR" { - printf("echo '%s'\n", $0); - printf("(cd ${TARGDIR}/%s && find . ! -name . | xargs /bin/rm -rf)\n", - $3); - printf("(cd %s && find . ! -name . | cpio -pdamu ${TARGDIR}/%s)\n", $2, - $3); - next; -} -$1 == "SPECIAL" { -# escaping shell quotation is ugly whether you use " or ', use cat <<'!' ... - work=$0; - gsub("[\\\\]", "\\\\", work); - gsub("[\"]", "\\\"", work); - gsub("[$]", "\\$", work); - gsub("[`]", "\\`", work); - printf("echo \"%s\"\n", work); - work=$0; - sub("^[ ]*" $1 "[ ]*", "", work); - printf("(cd ${TARGDIR}; %s)\n", work); - next; - } -{ - printf("echo '%s'\n", $0); - printf("echo 'Unknown keyword \"%s\" at line %d of input.'\n", $1, NR); - printf("exit 1\n"); - exit 1; -} -END { - printf("\n"); - printf("exit 0\n"); - exit 0; -} diff --git a/distrib/sparc/floppies/runlist.sh b/distrib/sparc/floppies/runlist.sh deleted file mode 100644 index 5ba7ce6a2db..00000000000 --- a/distrib/sparc/floppies/runlist.sh +++ /dev/null @@ -1,13 +0,0 @@ -# $OpenBSD: runlist.sh,v 1.2 1997/05/01 11:30:46 niklas Exp $ - -if [ "X$1" = "X-d" ]; then - SHELLCMD=cat - shift -else - SHELLCMD="sh -e" -fi - -( while [ "X$1" != "X" ]; do - cat $1 - shift -done ) | awk -f ${TOPDIR}/list2sh.awk | ${SHELLCMD} diff --git a/distrib/sparc/floppies/upgr/Makefile b/distrib/sparc/floppies/upgr/Makefile deleted file mode 100644 index 854fc857d9c..00000000000 --- a/distrib/sparc/floppies/upgr/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# $OpenBSD: Makefile,v 1.3 1997/05/01 11:30:57 niklas Exp $ - -TOP= ${.CURDIR}/.. - -.include "${TOP}/Makefile.inc" -IMAGE= upgr${REV}.fs - -.include "${TOP}/inst-common/Makefile.inc" diff --git a/distrib/sparc/floppies/upgr/dot.hdprofile b/distrib/sparc/floppies/upgr/dot.hdprofile deleted file mode 100644 index efe3275773a..00000000000 --- a/distrib/sparc/floppies/upgr/dot.hdprofile +++ /dev/null @@ -1,122 +0,0 @@ -# $OpenBSD: dot.hdprofile,v 1.5 1997/05/11 22:47:34 grr Exp $ -# -# Copyright (c) 1994 Christopher G. Demetriou -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. All advertising materials mentioning features or use of this software -# must display the following acknowledgement: -# This product includes software developed by Christopher G. Demetriou. -# 4. The name of the author may not be used to endorse or promote products -# derived from this software without specific prior written permission -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - -PATH=/sbin:/bin:/usr/bin:/usr/sbin:/ -export PATH - -umask 022 - -# XXX -# the TERM/EDITOR stuff is really well enough parameterized to be moved -# into install.sub where it could use the routines there and be invoked -# from the various (semi) MI install and upgrade scripts - -# terminals believed to be in termcap, default TERM -TERMS="sun vt100 dumb" -TERM=sun - -# editors believed to be in $EDITBIN, smart and dumb defaults -EDITORS="ed" -EDITOR=ed -DUMB=ed -EDITBIN=/bin -EDITUBIN=/usr/bin - -if [ "X${DONEPROFILE}" = "X" ]; then - DONEPROFILE=YES - - echo "Checking filesystems..." - fsck -y - - echo "Mounting filesystems..." - mount -a - - # set up some sane defaults - echo 'erase ^?, werase ^W, kill ^U, intr ^C' - stty newcrt werase ^W intr ^C kill ^U erase ^? 9600 - echo '' - - # get the terminal type - _forceloop="" - while [ "X$_forceloop" = X"" ]; do - echo "Supported terminals are: $TERMS" - eval `tset -s -m ":?$TERM"` - if [ "X$TERM" != X"unknown" ]; then - _forceloop="done" - fi - done - export TERM - - # get the editor preference - if [ "X$TERM" = "Xdumb" -o "X$TERM" = "Xunknown" ]; then - echo -n "$TERM can't handle $EDITOR" - EDITOR="$DUMB" - echo ", using $EDITOR as text editor!" - elif [ "X$EDITOR" = "X$EDITORS" ]; then - echo "Only one editor available, you get to use $EDITOR!" - else - _forceloop="" - while [ "X$_forceloop" = X"" ]; do - echo "Supported editors are: $EDITORS" - echo -n "text editor? [$EDITOR] " - read _choice - if [ "X$_choice" = "X" ]; then - _choice="$EDITOR" - _forceloop="$_choice" - else - for _editor in $EDITORS; do - if [ "X$_choice" = "X$_editor" ]; then - _forceloop="$_choice" - break - fi - done - fi - if [ "X$_forceloop" != "X" -a ! \( -x $EDITBIN/$_choice - -o -x $EDITUBIN/$_choice \) ] - then - _forceloop="" - fi - if [ "X$_forceloop" = "X" ]; then - echo "Sorry, $_choice isn't available." - _forceloop="" - fi - done - EDITOR="$_choice" - fi - export EDITOR - - # pull in the functions that people will use from the shell prompt. - . /.commonutils - . /.instutils - - echo "Follow the installation directions to install the OpenBSD" - echo "distribution sets." -fi diff --git a/distrib/sparc/floppies/upgr/dot.profile b/distrib/sparc/floppies/upgr/dot.profile deleted file mode 100644 index abcb0d812d5..00000000000 --- a/distrib/sparc/floppies/upgr/dot.profile +++ /dev/null @@ -1,120 +0,0 @@ -# $OpenBSD: dot.profile,v 1.5 2000/01/30 01:21:22 deraadt Exp $ -# -# Copyright (c) 1994 Christopher G. Demetriou -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. All advertising materials mentioning features or use of this software -# must display the following acknowledgement: -# This product includes software developed by Christopher G. Demetriou. -# 4. The name of the author may not be used to endorse or promote products -# derived from this software without specific prior written permission -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# - -export PATH=/sbin:/bin:/usr/bin:/usr/sbin:/ -export HISTFILE=/.sh_history - -umask 022 - -set -o emacs # emacs-style command line editing -alias dmesg="cat /kern/msgbuf" - -# XXX -# the TERM/EDITOR stuff is really well enough parameterized to be moved -# into install.sub where it could use the routines there and be invoked -# from the various (semi) MI install and upgrade scripts - -# terminals believed to be in termcap, default TERM -TERMS="sun vt100 dumb" -TERM=sun - -# editors believed to be in $EDITBIN, smart and dumb defaults -EDITORS="ed" -EDITOR=ed -DUMB=ed -EDITBIN=/bin - -if [ "X${DONEPROFILE}" = "X" ]; then - DONEPROFILE=YES - - # mount kernfs and re-mount the boot media (perhaps r/w) - mount_kernfs /kern /kern - mount_ffs -o update /kern/rootdev / - - # set up some sane defaults - echo 'erase ^H, werase ^W, kill ^U, intr ^C' - stty newcrt werase ^W intr ^C kill ^U erase ^H 9600 - - # get the terminal type - _forceloop="" - while [ "X$_forceloop" = X"" ]; do - echo "Supported terminals are: $TERMS" - eval `tset -s -m ":?$TERM"` - if [ "X$TERM" != X"unknown" ]; then - _forceloop="done" - fi - done - export TERM - - # get the editor preference - if [ "X$TERM" = "Xdumb" -o "X$TERM" = "Xunknown" ]; then - echo -n "$TERM can't handle $EDITOR" - EDITOR="$DUMB" - echo ", using $EDITOR as text editor!" - elif [ "X$EDITOR" = "X$EDITORS" ]; then - echo "Only one editor available, you get to use $EDITOR!" - else - _forceloop="" - while [ "X$_forceloop" = X"" ]; do - echo "Supported editors are: $EDITORS" - echo -n "text editor? [$EDITOR] " - read _choice - if [ "X$_choice" = "X" ]; then - _choice="$EDITOR" - _forceloop="$_choice" - else - for _editor in $EDITORS; do - if [ "X$_choice" = "X$_editor" ]; then - _forceloop="$_choice" - break - fi - done - fi - if [ "X$_forceloop" != "X" -a ! -x $EDITBIN/$_choice ] - then - _forceloop="" - fi - if [ "X$_forceloop" = "X" ]; then - echo "Sorry, $_choice isn't available." - _forceloop="" - fi - done - EDITOR="$_choice" - fi - export EDITOR - - # pull in the functions that people will use from the shell prompt. - . /.commonutils - . /.upgrutils - - # run the upgrade script. - upgrade -fi diff --git a/distrib/sparc/floppies/upgr/dot.upgrutils b/distrib/sparc/floppies/upgr/dot.upgrutils deleted file mode 100644 index 06b93eabc42..00000000000 --- a/distrib/sparc/floppies/upgr/dot.upgrutils +++ /dev/null @@ -1,57 +0,0 @@ -# $OpenBSD: dot.upgrutils,v 1.2 1996/04/25 21:31:32 niklas Exp $ -# -# Copyright (c) 1994 Christopher G. Demetriou -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. All advertising materials mentioning features or use of this software -# must display the following acknowledgement: -# This product includes software developed by Christopher G. Demetriou. -# 4. The name of the author may not be used to endorse or promote products -# derived from this software without specific prior written permission -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -# Upgrade cleanup utilites (functions), to make sure a recently-upgraded -# system is safely runnable. These are meant to be invoked from the shell -# prompt, by people installing OpenBSD. - -Cleanup() -{ - upgrade_dir=/ - - if [ ! -f /etc/fstab ]; then - upgrade_dir=/mnt - fi - - echo "Cleaning up miscellaneous files in /etc..." - mv $upgrade_dir/etc/rc.bak $upgrade_dir/etc/rc - chroot $upgrade_dir /usr/sbin/pwd_mkdb -p /etc/master.passwd - chroot $upgrade_dir /bin/rm /etc/sendmail.fc > /dev/null 2>&1 - sync - echo "Done." - - echo "" - echo "All that's left to do now is to install a new OpenBSD kernel" - echo "on your hard disk. You should now halt your machine using" - echo "the 'halt' command. Once the machine is halted, replace the" - echo "installation floppy with the kernel-copy floppy and hit any" - echo "key to reboot. Use the kernel-copy floppy to copy a kernel" - echo "to your hard disk." -} diff --git a/distrib/sparc/floppies/upgr/list b/distrib/sparc/floppies/upgr/list deleted file mode 100644 index bf8911a25f9..00000000000 --- a/distrib/sparc/floppies/upgr/list +++ /dev/null @@ -1,8 +0,0 @@ -# $OpenBSD: list,v 1.2 1997/05/01 11:30:59 niklas Exp $ - -# and the upgrade tools -COPY dot.profile .profile -COPY dot.upgrutils .upgrutils -COPY upgrade.sh upgrade -COPY dot.hdprofile tmp/.hdprofile -SPECIAL chmod 755 upgrade diff --git a/distrib/sparc/floppies/upgr/upgrade.sh b/distrib/sparc/floppies/upgr/upgrade.sh deleted file mode 100644 index 6d587a41e30..00000000000 --- a/distrib/sparc/floppies/upgr/upgrade.sh +++ /dev/null @@ -1,261 +0,0 @@ -#!/bin/sh -# $OpenBSD: upgrade.sh,v 1.4 1997/05/11 22:47:34 grr Exp $ -# -# Copyright (c) 1994 Christopher G. Demetriou -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. All advertising materials mentioning features or use of this software -# must display the following acknowledgement: -# This product includes software developed by Christopher G. Demetriou. -# 4. The name of the author may not be used to endorse or promote products -# derived from this software without specific prior written permission -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -# OpenBSD upgrade script. -# In a perfect world, this would be a nice C program, with a reasonable -# user interface. - -DT=/etc/disktab # /etc/disktab -FSTABDIR=/mnt/etc # /mnt/etc -#DONTDOIT=echo - -VERSION=1.0 -FSTAB=${FSTABDIR}/fstab - -getresp() { - read resp - if [ "X$resp" = "X" ]; then - resp=$1 - fi -} - -echo "Welcome to the OpenBSD ${VERSION} upgrade program." -echo "" -echo "This program is designed to help you put the new version of OpenBSD" -echo "on your hard disk, in a simple and rational way. To upgrade, you" -echo "must have plenty of free space on all partitions which will be" -echo "upgraded. If you have at least 1MB free on your root partition," -echo "and several free on your /usr patition, you should be fine." -echo "" -echo "As with anything which modifies your hard drive's contents, this" -echo "program can cause SIGNIFICANT data loss, and you are advised" -echo "to make sure your hard drive is backed up before beginning the" -echo "upgrade process." -echo "" -echo "Default answers are displyed in brackets after the questions." -echo "You can hit Control-C at any time to quit, but if you do so at a" -echo "prompt, you may have to hit return. Also, quitting in the middle of" -echo "the upgrade may leave your system in an inconsistent (and unusable)" -echo "state." -echo "" -echo -n "Proceed with upgrade? [n] " -getresp "n" -case "$resp" in - y*|Y*) - echo "Cool! Let's get to it..." - ;; - *) - echo "" - echo "OK, then. Enter 'halt' at the prompt to halt the" - echo "machine. Once the machine has halted, remove the" - echo "floppy and press any key to reboot." - exit - ;; -esac - -# find out what units are possible, and query the user. -driveunits=`ls /dev/[sw]d?a | sed -e 's,/dev/\(...\)a,\1,g'` -if [ "X${driveunits}" = "X" ]; then - echo "FATAL ERROR:" - echo "No disk devices." - echo "This is probably a bug in the install disks." - echo "Exiting install program." - exit -fi - -echo "" -echo "The following disks are supported by this upgrade procedure:" -echo " "${driveunits} -echo "If your system was previously completely contained within the" -echo "disks listed above (i.e. if your system didn't occupy any space" -echo "on disks NOT listed above), this upgrade disk can upgrade your" -echo "system. If it cannot, hit Control-C at the prompt." -echo "" -while [ "X${drivename}" = "X" ]; do - echo -n "Which disk contains your root partion? " - getresp - otherdrives=`echo "${driveunits}" | sed -e s,${resp},,` - if [ "X${driveunits}" = "X${otherdrives}" ]; then - echo "" - echo "\"${resp}\" is an invalid drive name. Valid choices" - echo "are: "${driveunits} - echo "" - else - drivename=${resp} - fi -done - -echo "" -echo "Root partition is on ${drivename}a." - -echo "" -echo "Would you like to upgrade your file systems to the new file system" -echo -n "format? [y] " -getresp "y" -case "$resp" in - n*|N*) - echo "" - echo "You should upgrade your file systems with 'fsck -c 2'" - echo "as soon as is feasible, because the new file system" - echo "code is better-tested and more performant." - upgradefs=NO - ;; - *) - upgradefs=YES - ;; -esac - -if [ $upgradefs = YES ]; then - echo "" - echo "Upgrading the file system on ${drivename}a..." - - fsck -p -c 2 /dev/r${drivename}a - if [ $? != 0 ]; then - echo "FATAL ERROR: FILE SYSTEM UPGRADE FAILED." - echo "You should probably reboot the machine, fsck your" - echo "disk(s), and try the upgrade procedure again." - exit 1 - fi - echo "Done." -fi - -echo "" -echo "Mounting root partition on /mnt..." -mount /dev/${drivename}a /mnt -if [ $? != 0 ]; then - echo "FATAL ERROR: MOUNT FAILED." - echo "You should verify that your system is set up as you" - echo "described, and re-attempt the upgrade procedure." - exit 1 -fi -echo "Done." - -if [ $upgradefs = YES ]; then - echo "" - echo -n "Copying new fsck binary to your hard disk..." - if [ ! -d /mnt/sbin ]; then - mkdir /mnt/sbin - fi - cp /sbin/fsck /mnt/sbin/fsck - if [ $? != 0 ]; then - echo "FATAL ERROR: COPY FAILED." - echo "It in unclear why this error would occur. It looks" - echo "like you may end up having to upgrade by hand." - exit 1 - fi - echo " Done." - - echo "" - echo "Re-mounting root partition read-only..." - mount -u -o ro /dev/${drivename}a /mnt - if [ $? != 0 ]; then - echo "FATAL ERROR: RE-MOUNT FAILED." - echo "It in unclear why this error would occur. It looks" - echo "like you may end up having to upgrade by hand." - exit 1 - fi - echo "Done." - - echo "" - echo "Upgrading the rest of your file systems..." - chroot /mnt fsck -p -c 2 - if [ $? != 0 ]; then - echo "FATAL ERROR: FILE SYSTEM UPGRADE(S) FAILED." - echo "You should probably reboot the machine, fsck your" - echo "file system(s), and try the upgrade procedure" - echo "again." - exit 1 - fi - echo "Done." - - echo "" - echo "Re-mounting root partition read-write..." - mount -u -o rw /dev/${drivename}a /mnt - if [ $? != 0 ]; then - echo "FATAL ERROR: RE-MOUNT FAILED." - echo "It in unclear why this error would occur. It looks" - echo "like you may end up having to upgrade by hand." - exit 1 - fi - echo "Done." -fi - -echo "" -echo "Updating disk labels on ${drivename}..." -$DONTDOIT disklabel $drivename > /mnt/tmp/${drivename}.label -if [ $? != 0 ]; then - echo "FATAL ERROR: READ OF DISK LABEL FAILED." - echo "It in unclear why this error would occur. It looks" - echo "like you may end up having to upgrade by hand." - exit 1 -fi -$DONTDOIT disklabel -R $drivename /mnt/tmp/${drivename}.label - -echo "Updating boot blodk on ${drivename}..." -$DONTDOIT /usr/mdec/binstall -v ffs /mnt -if [ $? != 0 ]; then - echo "FATAL ERROR: UPDATE OF BOOT BLOCKS FAILED." - echo "It in unclear why this error would occur. It looks" - echo "like you may end up having to upgrade by hand." - exit 1 -fi - -if [ -f /mnt/boot ]; then -$DONTDOIT rm -f /mnt/boot.bak -$DONTDOIT mv /mnt/boot /mnt/boot.bak -fi - -echo "Done." - -echo "" -echo "Copying bootstrapping binaries and config files to the hard drive..." -$DONTDOIT cp /mnt/.profile /mnt/.profile.bak -$DONTDOIT pax -rw -X -k . /mnt -$DONTDOIT mv /mnt/etc/rc /mnt/etc/rc.bak -$DONTDOIT cp /tmp/.hdprofile /mnt/.profile - -echo "" -echo "Mounting remaining partitions..." -chroot /mnt mount -at ufs > /dev/null 2>&1 -echo "Done." - -echo "" -echo "" -echo "OK! The preliminary work of setting up your disk is now complete," -echo "and you can now upgrade the actual OpenBSD software." -echo "" -echo "Right now, your hard disk is mounted on /mnt. You should consult" -echo "the installation notes to determine how to load and install the new" -echo "OpenBSD distribution sets, and how to clean up after the upgrade" -echo "software, when you are done." -echo "" -echo "GOOD LUCK!" -echo ""