From: pefo Date: Sat, 22 Feb 1997 10:50:26 +0000 (+0000) Subject: Not used. X-Git-Url: http://artulab.com/gitweb/?a=commitdiff_plain;h=c191b166914f528c765d2061b81a8afd43c0bb18;p=openbsd Not used. --- diff --git a/sys/arch/wgrisc/dev/ace.c b/sys/arch/wgrisc/dev/ace.c deleted file mode 100644 index 0ee5e134c43..00000000000 --- a/sys/arch/wgrisc/dev/ace.c +++ /dev/null @@ -1,1653 +0,0 @@ -/* $OpenBSD: ace.c,v 1.1.1.1 1997/02/06 16:02:42 pefo Exp $ */ -/* $NetBSD: com.c,v 1.82.4.1 1996/06/02 09:08:00 mrg Exp $ */ - -/*- - * Copyright (c) 1993, 1994, 1995, 1996 - * Charles M. Hannum. All rights reserved. - * Copyright (c) 1991 The Regents of the University of California. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Berkeley and its contributors. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)com.c 7.5 (Berkeley) 5/16/91 - */ - -/* - * ACE driver, based on HP dca driver - * uses National Semiconductor NS16450/NS16550AF UART - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#ifdef COM_HAYESP -#include -#endif -#define com_lcr com_cfcr - -#include "ace.h" - - -#define COM_IBUFSIZE (2 * 512) -#define COM_IHIGHWATER ((3 * COM_IBUFSIZE) / 4) - -struct com_softc { - struct device sc_dev; - void *sc_ih; - bus_chipset_tag_t sc_bc; - struct tty *sc_tty; - - int sc_overflows; - int sc_floods; - int sc_errors; - - int sc_halt; - - int sc_iobase; -#ifdef COM_HAYESP - int sc_hayespbase; -#endif - - bus_io_handle_t sc_ioh; - bus_io_handle_t sc_hayespioh; - - u_char sc_hwflags; -#define COM_HW_NOIEN 0x01 -#define COM_HW_FIFO 0x02 -#define COM_HW_HAYESP 0x04 -#define COM_HW_ABSENT_PENDING 0x08 /* reattached, awaiting close/reopen */ -#define COM_HW_ABSENT 0x10 /* configure actually failed, or removed */ -#define COM_HW_REATTACH 0x20 /* reattaching */ -#define COM_HW_CONSOLE 0x40 - u_char sc_swflags; -#define COM_SW_SOFTCAR 0x01 -#define COM_SW_CLOCAL 0x02 -#define COM_SW_CRTSCTS 0x04 -#define COM_SW_MDMBUF 0x08 - u_char sc_msr, sc_mcr, sc_lcr, sc_ier; - u_char sc_dtr; - - u_char sc_cua; - - u_char sc_initialize; /* force initialization */ - - u_char *sc_ibuf, *sc_ibufp, *sc_ibufhigh, *sc_ibufend; - u_char sc_ibufs[2][COM_IBUFSIZE]; -}; - -#ifdef COM_HAYESP -int comprobeHAYESP __P((bus_io_handle_t hayespioh, struct com_softc *sc)); -#endif -void comdiag __P((void *)); -int comspeed __P((long)); -int comparam __P((struct tty *, struct termios *)); -void comstart __P((struct tty *)); -void compoll __P((void *)); - -/* XXX: These belong elsewhere */ -cdev_decl(com); -bdev_decl(com); - -struct consdev; -void acecnprobe __P((struct consdev *)); -void acecninit __P((struct consdev *)); -int acecngetc __P((dev_t)); -void acecnputc __P((dev_t, int)); -void acecnpollc __P((dev_t, int)); - -static u_char tiocm_xxx2mcr __P((int)); - -/* - * XXX the following two cfattach structs should be different, and possibly - * XXX elsewhere. - */ -int comprobe __P((struct device *, void *, void *)); -void comattach __P((struct device *, struct device *, void *)); -void com_absent_notify __P((struct com_softc *sc)); -void comstart_pending __P((void *)); - -#if NACE_ISA -struct cfattach ace_isa_ca = { - sizeof(struct com_softc), comprobe, comattach -}; -#endif - -#if NACE_COMMULTI -struct cfattach ace_commulti_ca = { - sizeof(struct com_softc), comprobe, comattach -}; -#endif - -#if NACE_RISCBUS -#undef CONADDR /* This is stupid but using devs before config .. */ -#define CONADDR 0xae400000 - -struct cfattach ace_riscbus_ca = { - sizeof(struct com_softc), comprobe, comattach -}; -#endif - - -struct cfdriver ace_cd = { - NULL, "ace", DV_TTY -}; - -void cominit __P((bus_chipset_tag_t, bus_io_handle_t, int)); - -#ifndef CONSPEED -#define CONSPEED B9600 -#endif - -#ifdef COMCONSOLE -int comdefaultrate = CONSPEED; /* XXX why set default? */ -#else -int comdefaultrate = TTYDEF_SPEED; -#endif -int comconsaddr; -int comconsinit; -int comconsattached; -bus_chipset_tag_t comconsbc; -bus_io_handle_t comconsioh; -tcflag_t comconscflag = TTYDEF_CFLAG; - -int commajor; -int comsopen = 0; -int comevents = 0; - -#ifdef KGDB -#include -extern int kgdb_dev; -extern int kgdb_rate; -extern int kgdb_debug_init; -#endif - -#define DEVUNIT(x) (minor(x) & 0x7f) -#define DEVCUA(x) (minor(x) & 0x80) - -/* Macros to clear/set/test flags. */ -#define SET(t, f) (t) |= (f) -#define CLR(t, f) (t) &= ~(f) -#define ISSET(t, f) ((t) & (f)) - -/* - * must be called at spltty() or higher. - */ -void -com_absent_notify(sc) - struct com_softc *sc; -{ - struct tty *tp = sc->sc_tty; - - if (tp) { - CLR(tp->t_state, TS_CARR_ON|TS_BUSY); - ttyflush(tp, FREAD|FWRITE); - } -} - -int -comspeed(speed) - long speed; -{ -#define divrnd(n, q) (((n)*2/(q)+1)/2) /* divide and round off */ - - int x, err; - - if (speed == 0) - return 0; - if (speed < 0) - return -1; - x = divrnd((COM_FREQ / 16), speed); - if (x <= 0) - return -1; - err = divrnd((COM_FREQ / 16) * 1000, speed * x) - 1000; - if (err < 0) - err = -err; - if (err > COM_TOLERANCE) - return -1; - return x; - -#undef divrnd(n, q) -} - -int -comprobe1(bc, ioh, iobase) - bus_chipset_tag_t bc; - bus_io_handle_t ioh; - int iobase; -{ - int i, k; - - /* force access to id reg */ - bus_io_write_1(bc, ioh, com_lcr, 0); - bus_io_write_1(bc, ioh, com_iir, 0); - for (i = 0; i < 32; i++) { - k = bus_io_read_1(bc, ioh, com_iir); - if (k & 0x38) { - bus_io_read_1(bc, ioh, com_data); /* cleanup */ - } else - break; - } - if (i >= 32) - return 0; - - return 1; -} - -#ifdef COM_HAYESP -int -comprobeHAYESP(hayespioh, sc) - bus_io_handle_t hayespioh; - struct com_softc *sc; -{ - char val, dips; - int combaselist[] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 }; - bus_chipset_tag_t bc = sc->sc_bc; - - /* - * Hayes ESP cards have two iobases. One is for compatibility with - * 16550 serial chips, and at the same ISA PC base addresses. The - * other is for ESP-specific enhanced features, and lies at a - * different addressing range entirely (0x140, 0x180, 0x280, or 0x300). - */ - - /* Test for ESP signature */ - if ((bus_io_read_1(bc, hayespioh, 0) & 0xf3) == 0) - return 0; - - /* - * ESP is present at ESP enhanced base address; unknown com port - */ - - /* Get the dip-switch configurations */ - bus_io_write_1(bc, hayespioh, HAYESP_CMD1, HAYESP_GETDIPS); - dips = bus_io_read_1(bc, hayespioh, HAYESP_STATUS1); - - /* Determine which com port this ESP card services: bits 0,1 of */ - /* dips is the port # (0-3); combaselist[val] is the com_iobase */ - if (sc->sc_iobase != combaselist[dips & 0x03]) - return 0; - - printf(": ESP"); - - /* Check ESP Self Test bits. */ - /* Check for ESP version 2.0: bits 4,5,6 == 010 */ - bus_io_write_1(bc, hayespioh, HAYESP_CMD1, HAYESP_GETTEST); - val = bus_io_read_1(bc, hayespioh, HAYESP_STATUS1); /* Clear reg 1 */ - val = bus_io_read_1(bc, hayespioh, HAYESP_STATUS2); - if ((val & 0x70) < 0x20) { - printf("-old (%o)", val & 0x70); - /* we do not support the necessary features */ - return 0; - } - - /* Check for ability to emulate 16550: bit 8 == 1 */ - if ((dips & 0x80) == 0) { - printf(" slave"); - /* XXX Does slave really mean no 16550 support?? */ - return 0; - } - - /* - * If we made it this far, we are a full-featured ESP v2.0 (or - * better), at the correct com port address. - */ - - SET(sc->sc_hwflags, COM_HW_HAYESP); - printf(", 1024 byte fifo\n"); - return 1; -} -#endif - -int -comprobe(parent, match, aux) - struct device *parent; - void *match, *aux; -{ - bus_chipset_tag_t bc; - bus_io_handle_t ioh; - int iobase, needioh; - int rv = 1; - -#if NACE_ISA -#define IS_ISA(parent) \ - (!strcmp((parent)->dv_cfdata->cf_driver->cd_name, "isa") || \ - !strcmp((parent)->dv_cfdata->cf_driver->cd_name, "pcmcia")) -#elif NACE_ISA -#define IS_ISA(parent) \ - !strcmp((parent)->dv_cfdata->cf_driver->cd_name, "isa") -#endif -#if NACE_RISCBUS -#define IS_RISCBUS(parent) \ - !strcmp((parent)->dv_cfdata->cf_driver->cd_name, "riscbus") -#endif - /* - * XXX should be broken out into functions for isa probe and - * XXX for commulti probe, with a helper function that contains - * XXX most of the interesting stuff. - */ -#if NACE_ISA - if (IS_ISA(parent)) { - struct isa_attach_args *ia = aux; - - bc = ia->ia_bc; - iobase = ia->ia_iobase; - needioh = 1; - } else -#endif -#if NACE_RISCBUS - if(IS_RISCBUS(parent)) { - struct confargs *ca = aux; - if(!BUS_MATCHNAME(ca, "com")) - return(0); - iobase = (long)BUS_CVTADDR(ca); - bc = 0; - needioh = 1; - } else -#endif -#if NACE_COMMULTI - if (1) { - struct cfdata *cf = match; - struct commulti_attach_args *ca = aux; - - if (cf->cf_loc[0] != -1 && cf->cf_loc[0] != ca->ca_slave) - return (0); - - bc = ca->ca_bc; - iobase = ca->ca_iobase; - ioh = ca->ca_ioh; - needioh = 0; - } else -#endif - return(0); /* This cannot happen */ - - /* if it's in use as console, it's there. */ - if (iobase == comconsaddr && !comconsattached) - goto out; - - if (needioh && bus_io_map(bc, iobase, COM_NPORTS, &ioh)) { - rv = 0; - goto out; - } - rv = comprobe1(bc, ioh, iobase); - if (needioh) - bus_io_unmap(bc, ioh, COM_NPORTS); - -out: -#if NACE_ISA - if (rv && IS_ISA(parent)) { - struct isa_attach_args *ia = aux; - - ia->ia_iosize = COM_NPORTS; - ia->ia_msize = 0; - } -#endif - return (rv); -} - -void -comattach(parent, self, aux) - struct device *parent, *self; - void *aux; -{ - struct com_softc *sc = (void *)self; - int iobase, irq; - bus_chipset_tag_t bc; - bus_io_handle_t ioh; -#ifdef COM_HAYESP - int hayesp_ports[] = { 0x140, 0x180, 0x280, 0x300, 0 }; - int *hayespp; -#endif - - /* - * XXX should be broken out into functions for isa attach and - * XXX for commulti attach, with a helper function that contains - * XXX most of the interesting stuff. - */ - if (ISSET(sc->sc_hwflags, COM_HW_REATTACH)) { - int s; - s = spltty(); - com_absent_notify(sc); - splx(s); - } else - sc->sc_hwflags = 0; - sc->sc_swflags = 0; -#if NACE_ISA - if (IS_ISA(parent)) { - struct isa_attach_args *ia = aux; - - /* - * We're living on an isa. - */ - iobase = ia->ia_iobase; - bc = ia->ia_bc; - if (iobase != comconsaddr) { - if (bus_io_map(bc, iobase, COM_NPORTS, &ioh)) - panic("comattach: io mapping failed"); - } else - ioh = comconsioh; - irq = ia->ia_irq; - } else -#endif -#if NACE_RISCBUS - if(IS_RISCBUS(parent)) { - struct confargs *ca = aux; - iobase = (long)BUS_CVTADDR(ca); - bc = 0; - irq = 0; - ioh = iobase; - } else -#endif -#if NACE_COMMULTI - if (1) { - struct commulti_attach_args *ca = aux; - - /* - * We're living on a commulti. - */ - iobase = ca->ca_iobase; - bc = ca->ca_bc; - ioh = ca->ca_ioh; - irq = IRQUNK; - - if (ca->ca_noien) - SET(sc->sc_hwflags, COM_HW_NOIEN); - } else -#endif - panic("comattach: impossible"); - - sc->sc_bc = bc; - sc->sc_ioh = ioh; - sc->sc_iobase = iobase; - - if (iobase == comconsaddr) { - comconsattached = 1; - - /* - * Need to reset baud rate, etc. of next print so reset - * comconsinit. Also make sure console is always "hardwired". - */ - delay(1000); /* wait for output to finish */ - comconsinit = 0; - SET(sc->sc_hwflags, COM_HW_CONSOLE); - SET(sc->sc_swflags, COM_SW_SOFTCAR); - } - -#ifdef COM_HAYESP - /* Look for a Hayes ESP board. */ - for (hayespp = hayesp_ports; *hayespp != 0; hayespp++) { - bus_io_handle_t hayespioh; - -#define HAYESP_NPORTS 8 /* XXX XXX XXX ??? ??? ??? */ - if (bus_io_map(bc, *hayespp, HAYESP_NPORTS, &hayespioh)) - continue; - if (comprobeHAYESP(hayespioh, sc)) { - sc->sc_hayespbase = *hayespp; - sc->sc_hayespioh = hayespioh; - break; - } - bus_io_unmap(bc, hayespioh, HAYESP_NPORTS); - } - /* No ESP; look for other things. */ - if (*hayespp == 0) { -#endif - - /* look for a NS 16550AF UART with FIFOs */ - bus_io_write_1(bc, ioh, com_fifo, - FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_14); - delay(100); - if (ISSET(bus_io_read_1(bc, ioh, com_iir), IIR_FIFO_MASK) == - IIR_FIFO_MASK) - if (ISSET(bus_io_read_1(bc, ioh, com_fifo), FIFO_TRIGGER_14) == - FIFO_TRIGGER_14) { - SET(sc->sc_hwflags, COM_HW_FIFO); - printf(": ns16550a, working fifo\n"); - } else - printf(": ns16550, broken fifo\n"); - else - printf(": ns8250 or ns16450, no fifo\n"); - bus_io_write_1(bc, ioh, com_fifo, 0); -#ifdef COM_HAYESP - } -#endif - - /* disable interrupts */ - bus_io_write_1(bc, ioh, com_ier, 0); - bus_io_write_1(bc, ioh, com_mcr, 0); - - if (irq != IRQUNK) { -#if NACE_ISA - if (IS_ISA(parent)) { - struct isa_attach_args *ia = aux; - - sc->sc_ih = isa_intr_establish(ia->ia_ic, irq, - IST_EDGE, IPL_TTY, comintr, sc, - sc->sc_dev.dv_xname); - } else -#endif -#if NACE_RISCBUS - if (IS_RISCBUS(parent)) { - struct confargs *ca = aux; - BUS_INTR_ESTABLISH(ca, comintr, (void *)(long)sc); - } else -#endif - panic("comattach: IRQ but can't have one"); - } - -#ifdef KGDB - if (kgdb_dev == makedev(commajor, unit)) { - if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) - kgdb_dev = -1; /* can't debug over console port */ - else { - cominit(bc, ioh, kgdb_rate); - if (kgdb_debug_init) { - /* - * Print prefix of device name, - * let kgdb_connect print the rest. - */ - printf("%s: ", sc->sc_dev.dv_xname); - kgdb_connect(1); - } else - printf("%s: kgdb enabled\n", - sc->sc_dev.dv_xname); - } - } -#endif - - /* XXX maybe move up some? */ - if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) - printf("%s: console\n", sc->sc_dev.dv_xname); -} - -int -aceopen(dev, flag, mode, p) - dev_t dev; - int flag, mode; - struct proc *p; -{ - int unit = DEVUNIT(dev); - struct com_softc *sc; - bus_chipset_tag_t bc; - bus_io_handle_t ioh; - struct tty *tp; - int s; - int error = 0; - - if (unit >= ace_cd.cd_ndevs) - return ENXIO; - sc = ace_cd.cd_devs[unit]; - if (!sc || ISSET(sc->sc_hwflags, COM_HW_ABSENT|COM_HW_ABSENT_PENDING)) - return ENXIO; - - s = spltty(); - if (!sc->sc_tty) { - tp = sc->sc_tty = ttymalloc(); - tty_attach(tp); - } else - tp = sc->sc_tty; - splx(s); - - tp->t_oproc = comstart; - tp->t_param = comparam; - tp->t_dev = dev; - if (!ISSET(tp->t_state, TS_ISOPEN)) { - SET(tp->t_state, TS_WOPEN); - ttychars(tp); - tp->t_iflag = TTYDEF_IFLAG; - tp->t_oflag = TTYDEF_OFLAG; - if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) - tp->t_cflag = comconscflag; - else - tp->t_cflag = TTYDEF_CFLAG; - if (ISSET(sc->sc_swflags, COM_SW_CLOCAL)) - SET(tp->t_cflag, CLOCAL); - if (ISSET(sc->sc_swflags, COM_SW_CRTSCTS)) - SET(tp->t_cflag, CRTSCTS); - if (ISSET(sc->sc_swflags, COM_SW_MDMBUF)) - SET(tp->t_cflag, MDMBUF); - tp->t_lflag = TTYDEF_LFLAG; - tp->t_ispeed = tp->t_ospeed = comdefaultrate; - - s = spltty(); - - sc->sc_initialize = 1; - comparam(tp, &tp->t_termios); - ttsetwater(tp); - - if (comsopen++ == 0) - timeout(compoll, NULL, 1); - - sc->sc_ibufp = sc->sc_ibuf = sc->sc_ibufs[0]; - sc->sc_ibufhigh = sc->sc_ibuf + COM_IHIGHWATER; - sc->sc_ibufend = sc->sc_ibuf + COM_IBUFSIZE; - - bc = sc->sc_bc; - ioh = sc->sc_ioh; -#ifdef COM_HAYESP - /* Setup the ESP board */ - if (ISSET(sc->sc_hwflags, COM_HW_HAYESP)) { - bus_io_handle_t hayespioh = sc->sc_hayespioh; - - bus_io_write_1(bc, ioh, com_fifo, - FIFO_DMA_MODE|FIFO_ENABLE| - FIFO_RCV_RST|FIFO_XMT_RST|FIFO_TRIGGER_8); - - /* Set 16550 compatibility mode */ - bus_io_write_1(bc, hayespioh, HAYESP_CMD1, HAYESP_SETMODE); - bus_io_write_1(bc, hayespioh, HAYESP_CMD2, - HAYESP_MODE_FIFO|HAYESP_MODE_RTS| - HAYESP_MODE_SCALE); - - /* Set RTS/CTS flow control */ - bus_io_write_1(bc, hayespioh, HAYESP_CMD1, HAYESP_SETFLOWTYPE); - bus_io_write_1(bc, hayespioh, HAYESP_CMD2, HAYESP_FLOW_RTS); - bus_io_write_1(bc, hayespioh, HAYESP_CMD2, HAYESP_FLOW_CTS); - - /* Set flow control levels */ - bus_io_write_1(bc, hayespioh, HAYESP_CMD1, HAYESP_SETRXFLOW); - bus_io_write_1(bc, hayespioh, HAYESP_CMD2, - HAYESP_HIBYTE(HAYESP_RXHIWMARK)); - bus_io_write_1(bc, hayespioh, HAYESP_CMD2, - HAYESP_LOBYTE(HAYESP_RXHIWMARK)); - bus_io_write_1(bc, hayespioh, HAYESP_CMD2, - HAYESP_HIBYTE(HAYESP_RXLOWMARK)); - bus_io_write_1(bc, hayespioh, HAYESP_CMD2, - HAYESP_LOBYTE(HAYESP_RXLOWMARK)); - } else -#endif - if (ISSET(sc->sc_hwflags, COM_HW_FIFO)) { - /* - * (Re)enable and drain FIFOs. - * - * Certain SMC chips cause problems if the FIFOs are - * enabled while input is ready. Turn off the FIFO - * if necessary to clear the input. Test the input - * ready bit after enabling the FIFOs to handle races - * between enabling and fresh input. - * - * Set the FIFO threshold based on the receive speed. - */ - for (;;) { - bus_io_write_1(bc, ioh, com_fifo, 0); - delay(100); - (void) bus_io_read_1(bc, ioh, com_data); - bus_io_write_1(bc, ioh, com_fifo, - FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | - (tp->t_ispeed <= 1200 ? - FIFO_TRIGGER_1 : FIFO_TRIGGER_8)); - delay(100); - if(!ISSET(bus_io_read_1(bc, ioh, - com_lsr), LSR_RXRDY)) - break; - } - } - - /* flush any pending I/O */ - while (ISSET(bus_io_read_1(bc, ioh, com_lsr), LSR_RXRDY)) - (void) bus_io_read_1(bc, ioh, com_data); - /* you turn me on, baby */ - sc->sc_mcr = MCR_DTR | MCR_RTS; - if (!ISSET(sc->sc_hwflags, COM_HW_NOIEN)) - SET(sc->sc_mcr, MCR_IENABLE); - bus_io_write_1(bc, ioh, com_mcr, sc->sc_mcr); - sc->sc_ier = IER_ERXRDY | IER_ERLS | IER_EMSC; - bus_io_write_1(bc, ioh, com_ier, sc->sc_ier); - - sc->sc_msr = bus_io_read_1(bc, ioh, com_msr); - if (ISSET(sc->sc_swflags, COM_SW_SOFTCAR) || DEVCUA(dev) || - ISSET(sc->sc_msr, MSR_DCD) || ISSET(tp->t_cflag, MDMBUF)) - SET(tp->t_state, TS_CARR_ON); - else - CLR(tp->t_state, TS_CARR_ON); - } else if (ISSET(tp->t_state, TS_XCLUDE) && p->p_ucred->cr_uid != 0) - return EBUSY; - else - s = spltty(); - - if (DEVCUA(dev)) { - if (ISSET(tp->t_state, TS_ISOPEN)) { - /* Ah, but someone already is dialed in... */ - splx(s); - return EBUSY; - } - sc->sc_cua = 1; /* We go into CUA mode */ - } - - /* wait for carrier if necessary */ - if (ISSET(flag, O_NONBLOCK)) { - if (!DEVCUA(dev) && sc->sc_cua) { - /* Opening TTY non-blocking... but the CUA is busy */ - splx(s); - return EBUSY; - } - } else { - while (!(DEVCUA(dev) && sc->sc_cua) && - !ISSET(tp->t_cflag, CLOCAL) && - !ISSET(tp->t_state, TS_CARR_ON)) { - SET(tp->t_state, TS_WOPEN); - error = ttysleep(tp, &tp->t_rawq, TTIPRI | PCATCH, - ttopen, 0); - if (error) { - /* XXX should turn off chip if we're the - only waiter */ - if (DEVCUA(dev)) - sc->sc_cua = 0; - splx(s); - return error; - } - } - } - splx(s); - - return (*linesw[tp->t_line].l_open)(dev, tp); -} - -int -aceclose(dev, flag, mode, p) - dev_t dev; - int flag, mode; - struct proc *p; -{ - int unit = DEVUNIT(dev); - struct com_softc *sc = ace_cd.cd_devs[unit]; - struct tty *tp = sc->sc_tty; - bus_chipset_tag_t bc = sc->sc_bc; - bus_io_handle_t ioh = sc->sc_ioh; - int s; - - /* XXX This is for cons.c. */ - if (!ISSET(tp->t_state, TS_ISOPEN)) - return 0; - - (*linesw[tp->t_line].l_close)(tp, flag); - s = spltty(); - if (!ISSET(sc->sc_hwflags, COM_HW_ABSENT|COM_HW_ABSENT_PENDING)) { - /* can't do any of this stuff .... */ - CLR(sc->sc_lcr, LCR_SBREAK); - bus_io_write_1(bc, ioh, com_lcr, sc->sc_lcr); - bus_io_write_1(bc, ioh, com_ier, 0); - if (ISSET(tp->t_cflag, HUPCL) && - !ISSET(sc->sc_swflags, COM_SW_SOFTCAR)) { - /* XXX perhaps only clear DTR */ - bus_io_write_1(bc, ioh, com_mcr, 0); - } - } - CLR(tp->t_state, TS_BUSY | TS_FLUSH); - if (--comsopen == 0) - untimeout(compoll, NULL); - sc->sc_cua = 0; - splx(s); - ttyclose(tp); -#ifdef COM_DEBUG - /* mark it ready for more use if reattached earlier */ - if (ISSET(sc->sc_hwflags, COM_HW_ABSENT_PENDING)) { - printf("aceclose pending cleared\n"); - } -#endif - CLR(sc->sc_hwflags, COM_HW_ABSENT_PENDING); - -#ifdef notyet /* XXXX */ - if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { - ttyfree(tp); - sc->sc_tty = 0; - } -#endif - return 0; -} - -int -aceread(dev, uio, flag) - dev_t dev; - struct uio *uio; - int flag; -{ - struct com_softc *sc = ace_cd.cd_devs[DEVUNIT(dev)]; - struct tty *tp = sc->sc_tty; - - if (ISSET(sc->sc_hwflags, COM_HW_ABSENT|COM_HW_ABSENT_PENDING)) { - int s = spltty(); - com_absent_notify(sc); - splx(s); - return EIO; - } - - return ((*linesw[tp->t_line].l_read)(tp, uio, flag)); -} - -int -acewrite(dev, uio, flag) - dev_t dev; - struct uio *uio; - int flag; -{ - struct com_softc *sc = ace_cd.cd_devs[DEVUNIT(dev)]; - struct tty *tp = sc->sc_tty; - - if (ISSET(sc->sc_hwflags, COM_HW_ABSENT|COM_HW_ABSENT_PENDING)) { - int s = spltty(); - com_absent_notify(sc); - splx(s); - return EIO; - } - - return ((*linesw[tp->t_line].l_write)(tp, uio, flag)); -} - -struct tty * -acetty(dev) - dev_t dev; -{ - struct com_softc *sc = ace_cd.cd_devs[DEVUNIT(dev)]; - struct tty *tp = sc->sc_tty; - - return (tp); -} - -static u_char -tiocm_xxx2mcr(data) - int data; -{ - u_char m = 0; - - if (ISSET(data, TIOCM_DTR)) - SET(m, MCR_DTR); - if (ISSET(data, TIOCM_RTS)) - SET(m, MCR_RTS); - return m; -} - -int -aceioctl(dev, cmd, data, flag, p) - dev_t dev; - u_long cmd; - caddr_t data; - int flag; - struct proc *p; -{ - int unit = DEVUNIT(dev); - struct com_softc *sc = ace_cd.cd_devs[unit]; - struct tty *tp = sc->sc_tty; - bus_chipset_tag_t bc = sc->sc_bc; - bus_io_handle_t ioh = sc->sc_ioh; - int error; - - if (ISSET(sc->sc_hwflags, COM_HW_ABSENT|COM_HW_ABSENT_PENDING)) { - int s = spltty(); - com_absent_notify(sc); - splx(s); - return EIO; - } - - error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p); - if (error >= 0) - return error; - error = ttioctl(tp, cmd, data, flag, p); - if (error >= 0) - return error; - - switch (cmd) { - case TIOCSBRK: - SET(sc->sc_lcr, LCR_SBREAK); - bus_io_write_1(bc, ioh, com_lcr, sc->sc_lcr); - break; - case TIOCCBRK: - CLR(sc->sc_lcr, LCR_SBREAK); - bus_io_write_1(bc, ioh, com_lcr, sc->sc_lcr); - break; - case TIOCSDTR: - SET(sc->sc_mcr, sc->sc_dtr); - bus_io_write_1(bc, ioh, com_mcr, sc->sc_mcr); - break; - case TIOCCDTR: - CLR(sc->sc_mcr, sc->sc_dtr); - bus_io_write_1(bc, ioh, com_mcr, sc->sc_mcr); - break; - case TIOCMSET: - CLR(sc->sc_mcr, MCR_DTR | MCR_RTS); - case TIOCMBIS: - SET(sc->sc_mcr, tiocm_xxx2mcr(*(int *)data)); - bus_io_write_1(bc, ioh, com_mcr, sc->sc_mcr); - break; - case TIOCMBIC: - CLR(sc->sc_mcr, tiocm_xxx2mcr(*(int *)data)); - bus_io_write_1(bc, ioh, com_mcr, sc->sc_mcr); - break; - case TIOCMGET: { - u_char m; - int bits = 0; - - m = sc->sc_mcr; - if (ISSET(m, MCR_DTR)) - SET(bits, TIOCM_DTR); - if (ISSET(m, MCR_RTS)) - SET(bits, TIOCM_RTS); - m = sc->sc_msr; - if (ISSET(m, MSR_DCD)) - SET(bits, TIOCM_CD); - if (ISSET(m, MSR_CTS)) - SET(bits, TIOCM_CTS); - if (ISSET(m, MSR_DSR)) - SET(bits, TIOCM_DSR); - if (ISSET(m, MSR_RI | MSR_TERI)) - SET(bits, TIOCM_RI); - if (bus_io_read_1(bc, ioh, com_ier)) - SET(bits, TIOCM_LE); - *(int *)data = bits; - break; - } - case TIOCGFLAGS: { - int driverbits, userbits = 0; - - driverbits = sc->sc_swflags; - if (ISSET(driverbits, COM_SW_SOFTCAR)) - SET(userbits, TIOCFLAG_SOFTCAR); - if (ISSET(driverbits, COM_SW_CLOCAL)) - SET(userbits, TIOCFLAG_CLOCAL); - if (ISSET(driverbits, COM_SW_CRTSCTS)) - SET(userbits, TIOCFLAG_CRTSCTS); - if (ISSET(driverbits, COM_SW_MDMBUF)) - SET(userbits, TIOCFLAG_MDMBUF); - - *(int *)data = userbits; - break; - } - case TIOCSFLAGS: { - int userbits, driverbits = 0; - - error = suser(p->p_ucred, &p->p_acflag); - if (error != 0) - return(EPERM); - - userbits = *(int *)data; - if (ISSET(userbits, TIOCFLAG_SOFTCAR) || - ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) - SET(driverbits, COM_SW_SOFTCAR); - if (ISSET(userbits, TIOCFLAG_CLOCAL)) - SET(driverbits, COM_SW_CLOCAL); - if (ISSET(userbits, TIOCFLAG_CRTSCTS)) - SET(driverbits, COM_SW_CRTSCTS); - if (ISSET(userbits, TIOCFLAG_MDMBUF)) - SET(driverbits, COM_SW_MDMBUF); - - sc->sc_swflags = driverbits; - break; - } - default: - return ENOTTY; - } - - return 0; -} - -int -comparam(tp, t) - struct tty *tp; - struct termios *t; -{ - struct com_softc *sc = ace_cd.cd_devs[DEVUNIT(tp->t_dev)]; - bus_chipset_tag_t bc = sc->sc_bc; - bus_io_handle_t ioh = sc->sc_ioh; - int ospeed = comspeed(t->c_ospeed); - u_char lcr; - tcflag_t oldcflag; - int s; - - if (ISSET(sc->sc_hwflags, COM_HW_ABSENT|COM_HW_ABSENT_PENDING)) { - int s = spltty(); - com_absent_notify(sc); - splx(s); - return EIO; - } - - /* check requested parameters */ - if (ospeed < 0 || (t->c_ispeed && t->c_ispeed != t->c_ospeed)) - return EINVAL; - - lcr = ISSET(sc->sc_lcr, LCR_SBREAK); - - switch (ISSET(t->c_cflag, CSIZE)) { - case CS5: - SET(lcr, LCR_5BITS); - break; - case CS6: - SET(lcr, LCR_6BITS); - break; - case CS7: - SET(lcr, LCR_7BITS); - break; - case CS8: - SET(lcr, LCR_8BITS); - break; - } - if (ISSET(t->c_cflag, PARENB)) { - SET(lcr, LCR_PENAB); - if (!ISSET(t->c_cflag, PARODD)) - SET(lcr, LCR_PEVEN); - } - if (ISSET(t->c_cflag, CSTOPB)) - SET(lcr, LCR_STOPB); - - sc->sc_lcr = lcr; - - s = spltty(); - - if (ospeed == 0) { - CLR(sc->sc_mcr, MCR_DTR); - bus_io_write_1(bc, ioh, com_mcr, sc->sc_mcr); - } - - /* - * Set the FIFO threshold based on the receive speed, if we are - * changing it. - */ - if (sc->sc_initialize || (tp->t_ispeed != t->c_ispeed)) { - sc->sc_initialize = 0; - - if (ospeed != 0) { - /* - * Make sure the transmit FIFO is empty before - * proceeding. If we don't do this, some revisions - * of the UART will hang. Interestingly enough, - * even if we do this will the last character is - * still being pushed out, they don't hang. This - * seems good enough. - */ - while (ISSET(tp->t_state, TS_BUSY)) { - int error; - - ++sc->sc_halt; - error = ttysleep(tp, &tp->t_outq, - TTOPRI | PCATCH, "comprm", 0); - --sc->sc_halt; - if (error) { - splx(s); - comstart(tp); - return (error); - } - } - - bus_io_write_1(bc, ioh, com_lcr, lcr | LCR_DLAB); - bus_io_write_1(bc, ioh, com_dlbl, ospeed); - bus_io_write_1(bc, ioh, com_dlbh, ospeed >> 8); - bus_io_write_1(bc, ioh, com_lcr, lcr); - SET(sc->sc_mcr, MCR_DTR); - bus_io_write_1(bc, ioh, com_mcr, sc->sc_mcr); - } else - bus_io_write_1(bc, ioh, com_lcr, lcr); - - if (!ISSET(sc->sc_hwflags, COM_HW_HAYESP) && - ISSET(sc->sc_hwflags, COM_HW_FIFO)) - bus_io_write_1(bc, ioh, com_fifo, - FIFO_ENABLE | - (t->c_ispeed <= 1200 ? FIFO_TRIGGER_1 : FIFO_TRIGGER_8)); - } else - bus_io_write_1(bc, ioh, com_lcr, lcr); - - /* When not using CRTSCTS, RTS follows DTR. */ - if (!ISSET(t->c_cflag, CRTSCTS)) { - if (ISSET(sc->sc_mcr, MCR_DTR)) { - if (!ISSET(sc->sc_mcr, MCR_RTS)) { - SET(sc->sc_mcr, MCR_RTS); - bus_io_write_1(bc, ioh, com_mcr, sc->sc_mcr); - } - } else { - if (ISSET(sc->sc_mcr, MCR_RTS)) { - CLR(sc->sc_mcr, MCR_RTS); - bus_io_write_1(bc, ioh, com_mcr, sc->sc_mcr); - } - } - sc->sc_dtr = MCR_DTR | MCR_RTS; - } else - sc->sc_dtr = MCR_DTR; - - /* and copy to tty */ - tp->t_ispeed = t->c_ispeed; - tp->t_ospeed = t->c_ospeed; - oldcflag = tp->t_cflag; - tp->t_cflag = t->c_cflag; - - /* - * If DCD is off and MDMBUF is changed, ask the tty layer if we should - * stop the device. - */ - if (!ISSET(sc->sc_msr, MSR_DCD) && - !ISSET(sc->sc_swflags, COM_SW_SOFTCAR) && - ISSET(oldcflag, MDMBUF) != ISSET(tp->t_cflag, MDMBUF) && - (*linesw[tp->t_line].l_modem)(tp, 0) == 0) { - CLR(sc->sc_mcr, sc->sc_dtr); - bus_io_write_1(bc, ioh, com_mcr, sc->sc_mcr); - } - - /* Just to be sure... */ - splx(s); - comstart(tp); - return 0; -} - -void -comstart_pending(arg) - void *arg; -{ - struct com_softc *sc = arg; - int s; - - s = spltty(); - com_absent_notify(sc); - splx(s); -} - -void -comstart(tp) - struct tty *tp; -{ - struct com_softc *sc = ace_cd.cd_devs[DEVUNIT(tp->t_dev)]; - bus_chipset_tag_t bc = sc->sc_bc; - bus_io_handle_t ioh = sc->sc_ioh; - int s; - - s = spltty(); - if (ISSET(sc->sc_hwflags, COM_HW_ABSENT|COM_HW_ABSENT_PENDING)) { - /* - * not quite good enough: if caller is ttywait() it will - * go to sleep immediately, so hang out a bit and then - * prod caller again. - */ - com_absent_notify(sc); - timeout(comstart_pending, sc, 1); - goto out; - } - if (ISSET(tp->t_state, TS_BUSY)) - goto out; - if (ISSET(tp->t_state, TS_TIMEOUT | TS_TTSTOP) || - sc->sc_halt > 0) - goto stopped; - if (ISSET(tp->t_cflag, CRTSCTS) && !ISSET(sc->sc_msr, MSR_CTS)) - goto stopped; - if (tp->t_outq.c_cc <= tp->t_lowat) { - if (ISSET(tp->t_state, TS_ASLEEP)) { - CLR(tp->t_state, TS_ASLEEP); - wakeup(&tp->t_outq); - } - if (tp->t_outq.c_cc == 0) - goto stopped; - selwakeup(&tp->t_wsel); - } - SET(tp->t_state, TS_BUSY); - - if (!ISSET(sc->sc_ier, IER_ETXRDY)) { - SET(sc->sc_ier, IER_ETXRDY); - bus_io_write_1(bc, ioh, com_ier, sc->sc_ier); - } -#ifdef COM_HAYESP - if (ISSET(sc->sc_hwflags, COM_HW_HAYESP)) { - u_char buffer[1024], *cp = buffer; - int n = q_to_b(&tp->t_outq, cp, sizeof buffer); - do - bus_io_write_1(bc, ioh, com_data, *cp++); - while (--n); - } - else -#endif - if (ISSET(sc->sc_hwflags, COM_HW_FIFO)) { - u_char buffer[16], *cp = buffer; - int n = q_to_b(&tp->t_outq, cp, sizeof buffer); - do { - bus_io_write_1(bc, ioh, com_data, *cp++); - } while (--n); - } else - bus_io_write_1(bc, ioh, com_data, getc(&tp->t_outq)); -out: - splx(s); - return; -stopped: - if (ISSET(sc->sc_ier, IER_ETXRDY)) { - CLR(sc->sc_ier, IER_ETXRDY); - bus_io_write_1(bc, ioh, com_ier, sc->sc_ier); - } - splx(s); -} - -/* - * Stop output on a line. - */ -int -acestop(tp, flag) - struct tty *tp; - int flag; -{ - int s; - - s = spltty(); - if (ISSET(tp->t_state, TS_BUSY)) - if (!ISSET(tp->t_state, TS_TTSTOP)) - SET(tp->t_state, TS_FLUSH); - splx(s); - return 0; -} - -void -comdiag(arg) - void *arg; -{ - struct com_softc *sc = arg; - int overflows, floods; - int s; - - s = spltty(); - sc->sc_errors = 0; - overflows = sc->sc_overflows; - sc->sc_overflows = 0; - floods = sc->sc_floods; - sc->sc_floods = 0; - splx(s); - - log(LOG_WARNING, "%s: %d silo overflow%s, %d ibuf overflow%s\n", - sc->sc_dev.dv_xname, - overflows, overflows == 1 ? "" : "s", - floods, floods == 1 ? "" : "s"); -} - -void -compoll(arg) - void *arg; -{ - int unit; - struct com_softc *sc; - struct tty *tp; - register u_char *ibufp; - u_char *ibufend; - register int c; - int s; - static int lsrmap[8] = { - 0, TTY_PE, - TTY_FE, TTY_PE|TTY_FE, - TTY_FE, TTY_PE|TTY_FE, - TTY_FE, TTY_PE|TTY_FE - }; - - s = spltty(); - if (comevents == 0) { - splx(s); - goto out; - } - comevents = 0; - splx(s); - - for (unit = 0; unit < ace_cd.cd_ndevs; unit++) { - sc = ace_cd.cd_devs[unit]; - if (sc == 0 || sc->sc_ibufp == sc->sc_ibuf) - continue; - - tp = sc->sc_tty; - - s = spltty(); - - ibufp = sc->sc_ibuf; - ibufend = sc->sc_ibufp; - - if (ibufp == ibufend) { - splx(s); - continue; - } - - sc->sc_ibufp = sc->sc_ibuf = (ibufp == sc->sc_ibufs[0]) ? - sc->sc_ibufs[1] : sc->sc_ibufs[0]; - sc->sc_ibufhigh = sc->sc_ibuf + COM_IHIGHWATER; - sc->sc_ibufend = sc->sc_ibuf + COM_IBUFSIZE; - - if (tp == 0 || !ISSET(tp->t_state, TS_ISOPEN)) { - splx(s); - continue; - } - - if (ISSET(tp->t_cflag, CRTSCTS) && - !ISSET(sc->sc_mcr, MCR_RTS)) { - /* XXX */ - SET(sc->sc_mcr, MCR_RTS); - bus_io_write_1(sc->sc_bc, sc->sc_ioh, com_mcr, - sc->sc_mcr); - } - - splx(s); - - while (ibufp < ibufend) { - c = *ibufp++; - if (*ibufp & LSR_OE) { - sc->sc_overflows++; - if (sc->sc_errors++ == 0) - timeout(comdiag, sc, 60 * hz); - } - /* This is ugly, but fast. */ - c |= lsrmap[(*ibufp++ & (LSR_BI|LSR_FE|LSR_PE)) >> 2]; - (*linesw[tp->t_line].l_rint)(c, tp); - } - } - -out: - timeout(compoll, NULL, 1); -} - -int -comintr(arg) - void *arg; -{ - struct com_softc *sc = arg; - bus_chipset_tag_t bc = sc->sc_bc; - bus_io_handle_t ioh = sc->sc_ioh; - struct tty *tp; - u_char lsr, data, msr, delta; -#ifdef COM_DEBUG - int n; - struct { - u_char iir, lsr, msr; - } iter[32]; -#endif - - if (ISSET(sc->sc_hwflags, COM_HW_ABSENT) || !sc->sc_tty) - return 0; /* can't do squat. */ - -#ifdef COM_DEBUG - n = 0; - if (ISSET(iter[n].iir = bus_io_read_1(bc, ioh, com_iir), IIR_NOPEND)) - return (0); -#else - if (ISSET(bus_io_read_1(bc, ioh, com_iir), IIR_NOPEND)) - return (0); -#endif - - tp = sc->sc_tty; - - for (;;) { -#ifdef COM_DEBUG - iter[n].lsr = -#endif - lsr = bus_io_read_1(bc, ioh, com_lsr); - - if (ISSET(lsr, LSR_RXRDY)) { - register u_char *p = sc->sc_ibufp; - - comevents = 1; - do { - data = bus_io_read_1(bc, ioh, com_data); - if (ISSET(lsr, LSR_BI)) { -#ifdef notdef - printf("break %02x %02x %02x %02x\n", - sc->sc_msr, sc->sc_mcr, sc->sc_lcr, - sc->sc_dtr); -#endif -#ifdef DDB - if (ISSET(sc->sc_hwflags, - COM_HW_CONSOLE)) { - Debugger(); - goto next; - } -#endif - } - if (p >= sc->sc_ibufend) { - sc->sc_floods++; - if (sc->sc_errors++ == 0) - timeout(comdiag, sc, 60 * hz); - } else { - *p++ = data; - *p++ = lsr; - if (p == sc->sc_ibufhigh && - ISSET(tp->t_cflag, CRTSCTS)) { - /* XXX */ - CLR(sc->sc_mcr, MCR_RTS); - bus_io_write_1(bc, ioh, com_mcr, - sc->sc_mcr); - } - } -#ifdef DDB - next: -#endif -#ifdef COM_DEBUG - if (++n >= 32) - goto ohfudge; - iter[n].lsr = -#endif - lsr = bus_io_read_1(bc, ioh, com_lsr); - } while (ISSET(lsr, LSR_RXRDY)); - - sc->sc_ibufp = p; - } -#ifdef COM_DEBUG - else if (ISSET(lsr, LSR_BI|LSR_FE|LSR_PE|LSR_OE)) - printf("weird lsr %02x\n", lsr); -#endif - -#ifdef COM_DEBUG - iter[n].msr = -#endif - msr = bus_io_read_1(bc, ioh, com_msr); - - if (msr != sc->sc_msr) { - delta = msr ^ sc->sc_msr; - sc->sc_msr = msr; - if (ISSET(delta, MSR_DCD) && - !ISSET(sc->sc_swflags, COM_SW_SOFTCAR) && - (*linesw[tp->t_line].l_modem)(tp, ISSET(msr, MSR_DCD)) == 0) { - CLR(sc->sc_mcr, sc->sc_dtr); - bus_io_write_1(bc, ioh, com_mcr, sc->sc_mcr); - } - if (ISSET(delta & msr, MSR_CTS) && - ISSET(tp->t_cflag, CRTSCTS)) { - /* the line is up and we want to do rts/cts flow control */ - (*linesw[tp->t_line].l_start)(tp); - } - } - - if (ISSET(lsr, LSR_TXRDY) && ISSET(tp->t_state, TS_BUSY)) { - CLR(tp->t_state, TS_BUSY | TS_FLUSH); - if (sc->sc_halt > 0) - wakeup(&tp->t_outq); - (*linesw[tp->t_line].l_start)(tp); - } - -#ifdef COM_DEBUG - if (++n >= 32) - goto ohfudge; - if (ISSET(iter[n].iir = bus_io_read_1(bc, ioh, com_iir), IIR_NOPEND)) - return (1); -#else - if (ISSET(bus_io_read_1(bc, ioh, com_iir), IIR_NOPEND)) - return (1); -#endif - } -#ifdef COM_DEBUG -ohfudge: - printf("comintr: too many iterations"); - for (n = 0; n < 32; n++) { - if ((n % 4) == 0) - printf("\ncomintr: iter[%02d]", n); - printf(" %02x %02x %02x", iter[n].iir, iter[n].lsr, iter[n].msr); - } - printf("\n"); - printf("comintr: msr %02x mcr %02x lcr %02x ier %02x\n", - sc->sc_msr, sc->sc_mcr, sc->sc_lcr, sc->sc_ier); - printf("comintr: state %08x cc %d\n", sc->sc_tty->t_state, - sc->sc_tty->t_outq.c_cc); -#endif -} - -/* - * Following are all routines needed for COM to act as console - */ -#include - -void -acecnprobe(cp) - struct consdev *cp; -{ - /* XXX NEEDS TO BE FIXED XXX */ - extern int cputype; - bus_chipset_tag_t bc = 0; - bus_io_handle_t ioh; - int found; - - cp->cn_pri = CN_DEAD; - - if (bus_io_map(bc, CONADDR, COM_NPORTS, &ioh)) { - cp->cn_pri = CN_DEAD; - return; - } - ioh = CONADDR; - found = comprobe1(bc, ioh, CONADDR); - if (!found) { - return; - } - - /* locate the major number */ - for (commajor = 0; commajor < nchrdev; commajor++) - if (cdevsw[commajor].d_open == aceopen) - break; - - /* initialize required fields */ - cp->cn_dev = makedev(commajor, CONUNIT); -#ifdef COMCONSOLE - cp->cn_pri = CN_REMOTE; /* Force a serial port console */ -#else - cp->cn_pri = CN_NORMAL; -#endif -} - -void -acecninit(cp) - struct consdev *cp; -{ - -#if 0 - XXX NEEDS TO BE FIXED XXX - comconsbc = ???; -#endif - if (bus_io_map(comconsbc, CONADDR, COM_NPORTS, &comconsioh)) - panic("acecninit: mapping failed"); - - cominit(comconsbc, comconsioh, comdefaultrate); - comconsaddr = CONADDR; - comconsinit = 0; -} - -void -cominit(bc, ioh, rate) - bus_chipset_tag_t bc; - bus_io_handle_t ioh; - int rate; -{ - int s = splhigh(); - u_char stat; - - bus_io_write_1(bc, ioh, com_lcr, LCR_DLAB); - rate = comspeed(comdefaultrate); - bus_io_write_1(bc, ioh, com_dlbl, rate); - bus_io_write_1(bc, ioh, com_dlbh, rate >> 8); - bus_io_write_1(bc, ioh, com_lcr, LCR_8BITS); - bus_io_write_1(bc, ioh, com_ier, IER_ERXRDY | IER_ETXRDY); - bus_io_write_1(bc, ioh, com_fifo, FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_4); - stat = bus_io_read_1(bc, ioh, com_iir); - splx(s); -} - -int -acecngetc(dev) - dev_t dev; -{ - int s = splhigh(); - bus_chipset_tag_t bc = comconsbc; - bus_io_handle_t ioh = comconsioh; - u_char stat, c; - - while (!ISSET(stat = bus_io_read_1(bc, ioh, com_lsr), LSR_RXRDY)) - ; - c = bus_io_read_1(bc, ioh, com_data); - stat = bus_io_read_1(bc, ioh, com_iir); - splx(s); - return c; -} - -/* - * Console kernel output character routine. - */ -void -acecnputc(dev, c) - dev_t dev; - int c; -{ - int s = splhigh(); - bus_chipset_tag_t bc = comconsbc; - bus_io_handle_t ioh = comconsioh; - u_char stat; - register int timo; - -#ifdef KGDB - if (dev != kgdb_dev) -#endif - if (comconsinit == 0) { - cominit(bc, ioh, comdefaultrate); - comconsinit = 1; - } - /* wait for any pending transmission to finish */ - timo = 50000; - while (!ISSET(stat = bus_io_read_1(bc, ioh, com_lsr), LSR_TXRDY) && --timo) - ; - bus_io_write_1(bc, ioh, com_data, c); - /* wait for this transmission to complete */ - timo = 1500000; - while (!ISSET(stat = bus_io_read_1(bc, ioh, com_lsr), LSR_TXRDY) && --timo) - ; - /* clear any interrupts generated by this transmission */ - stat = bus_io_read_1(bc, ioh, com_iir); - splx(s); -} - -void -acecnpollc(dev, on) - dev_t dev; - int on; -{ - -}