From: kstailey <kstailey@openbsd.org>
Date: Sat, 5 Apr 1997 23:34:18 +0000 (+0000)
Subject: add quirk table entry for the Ultima A6000C
X-Git-Url: http://artulab.com/gitweb/?a=commitdiff_plain;h=ad7f38812881a658710797a5032b399eab38814d;p=openbsd

add quirk table entry for the Ultima A6000C
---

diff --git a/sys/scsi/ss.c b/sys/scsi/ss.c
index 9fcf60980c1..0a944917e3b 100644
--- a/sys/scsi/ss.c
+++ b/sys/scsi/ss.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: ss.c,v 1.31 1997/04/05 22:59:13 kstailey Exp $	*/
+/*	$OpenBSD: ss.c,v 1.32 1997/04/05 23:34:20 kstailey Exp $	*/
 /*	$NetBSD: ss.c,v 1.10 1996/05/05 19:52:55 christos Exp $	*/
 
 /*
@@ -78,7 +78,7 @@ struct quirkdata {
 #define SS_Q_REV_CONTRAST	0x0040 /* reverse contrast control in s/w */
 #define SS_Q_HALFTONE		0x0080 /* uses non-zero halftone */
 #define SS_Q_SET_RIF		0x0100 /* set RIF bit */
-#define SS_Q_PADDING_TYPE	0x0200 /* does not pad to byte boundary */
+#define SS_Q_PADDING_TYPE	0x0200 /* does not truncate to byte boundary */
 #define SS_Q_BIT_ORDERING	0x0400 /* needs non-zero bit ordering */
 	long window_descriptor_length;
 	u_int8_t brightness;
@@ -141,6 +141,15 @@ void	get_buffer_status __P((struct ss_softc *, struct buf *));
  */
 
 struct ss_quirk_inquiry_pattern ss_quirk_patterns[] = {
+	{{T_SCANNER, T_FIXED,
+	 "ULTIMA  ", "A6000C PLUS     ", "    "}, {
+		 "Ultima A6000C",
+		 SS_Q_HALFTONE |
+		 SS_Q_PADDING_TYPE,
+		 0, 0, 0, 0, { 3, 0 }, 0, 0,
+		 ULTIMA_AC6000C,
+		 NULL, NULL, NULL
+	 }},
 	{{T_SCANNER, T_FIXED,
 	 "RICOH   ", "IS50            ", "    "}, {
 		 "Ricoh IS-50",
@@ -800,7 +809,7 @@ ss_set_window(ss, sio)
 	if (ss->quirkdata->quirks & SS_Q_PADDING_TYPE)
 		window_data.pad_type = ss->quirkdata->pad_type;
 	else
-		window_data.pad_type = 3; /* 3 = pad to byte boundary */
+		window_data.pad_type = 3; /* 3 = truncate to byte boundary */
 
 	if (ss->quirkdata->quirks & SS_Q_BIT_ORDERING)
 		_lto2l(ss->quirkdata->bit_ordering, window_data.bit_ordering);
diff --git a/sys/sys/scanio.h b/sys/sys/scanio.h
index 959c1f01088..4ff92eedef9 100644
--- a/sys/sys/scanio.h
+++ b/sys/sys/scanio.h
@@ -1,4 +1,4 @@
-/*	$OpenBSD: scanio.h,v 1.5 1997/03/11 03:53:55 kstailey Exp $	*/
+/*	$OpenBSD: scanio.h,v 1.6 1997/04/05 23:34:18 kstailey Exp $	*/
 /*	$NetBSD: scanio.h,v 1.1 1996/02/18 20:33:18 mycroft Exp $	*/
 
 /*
@@ -98,7 +98,7 @@ struct scan_io {
 
 #define RICOH_IS410	1	/* Ricoh IS-410 */
 #define FUJITSU_M3096G	2	/* Fujitsu M3096G */
-#define HP_SCANJET_IIC	3	/* HP ScanJet IIc */
+#define HP_SCANJET_IIC	3	/* HP SCL scanners (ScanJet IIc, IIcx, ...) */
 #define RICOH_FS1	4	/* Ricoh FS1 */
 #define SHARP_JX600	5	/* Sharp JX600 */
 #define RICOH_IS50	6	/* Ricoh IS-50 */
@@ -109,5 +109,6 @@ struct scan_io {
 #define MUSTEK_12000CX	11	/* Mustek MFS12000CX */
 #define EPSON_ES300C	12	/* epson es300c */
 #define GENERIC_SCSI2	13	/* good luck 8c{)] */
+#define ULTIMA_AC6000C	14	/* Ultima A6000C */
 
 #endif /* _SYS_SCANIO_H */