From: stsp Date: Tue, 12 May 2015 11:46:15 +0000 (+0000) Subject: Merge various urtwn(4) fixes from FreeBSD: X-Git-Url: http://artulab.com/gitweb/?a=commitdiff_plain;h=a55d0e847635e195bea37dcd5f78aa205e5a834c;p=openbsd Merge various urtwn(4) fixes from FreeBSD: Match additional devices (RTL8188CU_3, DWA123D1, DWA125D1). Fix efuse reading (fixes potential error in MAC address read from efuse). Replace some magic numbers with macros. Based on FreeBSD r270191, r273589, r281918, r281592, r282119, and r282623 via Mikhail mp39590@gmail on tech@ ok sthen@ --- diff --git a/sys/dev/usb/if_urtwn.c b/sys/dev/usb/if_urtwn.c index 81f811c36a6..0fa8b8125fe 100644 --- a/sys/dev/usb/if_urtwn.c +++ b/sys/dev/usb/if_urtwn.c @@ -1,4 +1,4 @@ -/* $OpenBSD: if_urtwn.c,v 1.46 2015/05/10 19:40:56 stsp Exp $ */ +/* $OpenBSD: if_urtwn.c,v 1.47 2015/05/12 11:46:15 stsp Exp $ */ /*- * Copyright (c) 2010 Damien Bergamini @@ -126,6 +126,7 @@ static const struct usb_devno urtwn_devs[] = { { USB_VENDOR_REALTEK, USB_PRODUCT_REALTEK_RTL8188CU_0 }, { USB_VENDOR_REALTEK, USB_PRODUCT_REALTEK_RTL8188CU_1 }, { USB_VENDOR_REALTEK, USB_PRODUCT_REALTEK_RTL8188CU_2 }, + { USB_VENDOR_REALTEK, USB_PRODUCT_REALTEK_RTL8188CU_3 }, { USB_VENDOR_REALTEK, USB_PRODUCT_REALTEK_RTL8188CU_COMBO }, { USB_VENDOR_REALTEK, USB_PRODUCT_REALTEK_RTL8188CUS }, { USB_VENDOR_REALTEK, USB_PRODUCT_REALTEK_RTL8188RU }, @@ -143,6 +144,9 @@ static const struct usb_devno urtwn_devs[] = { { USB_VENDOR_TRENDNET, USB_PRODUCT_TRENDNET_RTL8192CU }, { USB_VENDOR_ZYXEL, USB_PRODUCT_ZYXEL_RTL8192CU }, /* URTWN_RTL8188E */ + { USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DWA123D1 }, + { USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DWA125D1 }, + { USB_VENDOR_ELECOM, USB_PRODUCT_ELECOM_WDC150SU2M }, { USB_VENDOR_REALTEK, USB_PRODUCT_REALTEK_RTL8188ETV }, { USB_VENDOR_REALTEK, USB_PRODUCT_REALTEK_RTL8188EU } }; @@ -305,7 +309,10 @@ urtwn_attach(struct device *parent, struct device *self, void *aux) return; } - if (uaa->product == USB_PRODUCT_REALTEK_RTL8188EU || + if (uaa->product == USB_PRODUCT_DLINK_DWA123D1 || + uaa->product == USB_PRODUCT_DLINK_DWA125D1 || + uaa->product == USB_PRODUCT_ELECOM_WDC150SU2M || + uaa->product == USB_PRODUCT_REALTEK_RTL8188EU || uaa->product == USB_PRODUCT_REALTEK_RTL8188ETV) sc->chip |= URTWN_CHIP_88E; @@ -922,6 +929,8 @@ urtwn_efuse_read(struct urtwn_softc *sc) printf("\n"); } #endif + + urtwn_write_1(sc, R92C_EFUSE_ACCESS, R92C_EFUSE_ACCESS_OFF); } void @@ -929,6 +938,8 @@ urtwn_efuse_switch_power(struct urtwn_softc *sc) { uint32_t reg; + urtwn_write_1(sc, R92C_EFUSE_ACCESS, R92C_EFUSE_ACCESS_ON); + reg = urtwn_read_2(sc, R92C_SYS_ISO_CTRL); if (!(reg & R92C_SYS_ISO_CTRL_PWC_EV12V)) { urtwn_write_2(sc, R92C_SYS_ISO_CTRL, @@ -1014,7 +1025,7 @@ urtwn_r88e_read_rom(struct urtwn_softc *sc) /* Read full ROM image. */ memset(&sc->r88e_rom, 0xff, sizeof(sc->r88e_rom)); - while (addr < 1024) { + while (addr < 512) { reg = urtwn_efuse_read_1(sc, addr); if (reg == 0xff) break; @@ -1040,6 +1051,8 @@ urtwn_r88e_read_rom(struct urtwn_softc *sc) } } + urtwn_write_1(sc, R92C_EFUSE_ACCESS, R92C_EFUSE_ACCESS_OFF); + addr = 0x10; for (i = 0; i < 6; i++) sc->cck_tx_pwr[i] = sc->r88e_rom[addr++]; @@ -1178,7 +1191,7 @@ urtwn_r88e_ra_init(struct urtwn_softc *sc, u_int8_t mode, u_int32_t rates, reg = RW(reg, R92C_RRSR_RATE_BITMAP, rates); urtwn_write_4(sc, R92C_RRSR, reg); - /* + /* * Workaround for performance problems with firmware rate adaptation: * If the AP only supports 11b rates, disable mixed B/G mode. */ @@ -2354,14 +2367,12 @@ urtwn_r92c_power_on(struct urtwn_softc *sc) int urtwn_r88e_power_on(struct urtwn_softc *sc) { - uint8_t val; uint32_t reg; int ntries; /* Wait for power ready bit. */ for (ntries = 0; ntries < 5000; ntries++) { - val = urtwn_read_1(sc, 0x6) & 0x2; - if (val == 0x2) + if (urtwn_read_4(sc, R92C_APS_FSMCO) & R92C_APS_FSMCO_SUS_HOST) break; DELAY(10); } @@ -2376,17 +2387,24 @@ urtwn_r88e_power_on(struct urtwn_softc *sc) urtwn_read_1(sc, R92C_SYS_FUNC_EN) & ~(R92C_SYS_FUNC_EN_BBRSTB | R92C_SYS_FUNC_EN_BB_GLB_RST)); - urtwn_write_1(sc, 0x26, urtwn_read_1(sc, 0x26) | 0x80); + urtwn_write_1(sc, R92C_AFE_XTAL_CTRL + 2, + urtwn_read_1(sc, R92C_AFE_XTAL_CTRL + 2) | 0x80); /* Disable HWPDN. */ urtwn_write_1(sc, 0x5, urtwn_read_1(sc, 0x5) & ~0x80); + urtwn_write_2(sc, R92C_APS_FSMCO, + urtwn_read_2(sc, R92C_APS_FSMCO) & ~R92C_APS_FSMCO_APDM_HPDN); /* Disable WL suspend. */ - urtwn_write_1(sc, 0x5, urtwn_read_1(sc, 0x5) & ~0x18); + urtwn_write_2(sc, R92C_APS_FSMCO, + urtwn_read_2(sc, R92C_APS_FSMCO) & + ~(R92C_APS_FSMCO_AFSM_HSUS | R92C_APS_FSMCO_AFSM_PCIE)); - urtwn_write_1(sc, 0x5, urtwn_read_1(sc, 0x5) | 0x1); + urtwn_write_2(sc, R92C_APS_FSMCO, + urtwn_read_2(sc, R92C_APS_FSMCO) | R92C_APS_FSMCO_APFM_ONMAC); for (ntries = 0; ntries < 5000; ntries++) { - if (!(urtwn_read_1(sc, 0x5) & 0x1)) + if (!(urtwn_read_2(sc, R92C_APS_FSMCO) & + R92C_APS_FSMCO_APFM_ONMAC)) break; DELAY(10); } @@ -2394,7 +2412,8 @@ urtwn_r88e_power_on(struct urtwn_softc *sc) return (ETIMEDOUT); /* Enable LDO normal mode. */ - urtwn_write_1(sc, 0x23, urtwn_read_1(sc, 0x23) & ~0x10); + urtwn_write_1(sc, R92C_LPLDO_CTRL, + urtwn_read_1(sc, R92C_LPLDO_CTRL) & ~0x10); /* Enable MAC DMA/WMAC/SCHEDULE/SEC blocks. */ urtwn_write_2(sc, R92C_CR, 0);