From: stsp Date: Thu, 25 Apr 2024 11:37:39 +0000 (+0000) Subject: Adjust macro definitions for dwqe(4) Rx descriptors. X-Git-Url: http://artulab.com/gitweb/?a=commitdiff_plain;h=8fa0fb927089ea45e2dc5d118b6cc00d4004ce89;p=openbsd Adjust macro definitions for dwqe(4) Rx descriptors. Split Rx desc macro definitions into two sections, one for the "read" format and one for the "writeback" format. Add some macros which will be needed to support Rx checksum offloading. ok jmatthew@ --- diff --git a/sys/dev/ic/dwqereg.h b/sys/dev/ic/dwqereg.h index 7f44de46d92..6f1753b34d3 100644 --- a/sys/dev/ic/dwqereg.h +++ b/sys/dev/ic/dwqereg.h @@ -1,4 +1,4 @@ -/* $OpenBSD: dwqereg.h,v 1.6 2024/04/25 08:51:37 jmatthew Exp $ */ +/* $OpenBSD: dwqereg.h,v 1.7 2024/04/25 11:37:39 stsp Exp $ */ /* * Copyright (c) 2008, 2019 Mark Kettenis * Copyright (c) 2017, 2022 Patrick Wildt @@ -235,14 +235,44 @@ struct dwqe_desc { #define TDES3_FS (1 << 29) #define TDES3_OWN (1U << 31) -/* Rx bits */ +/* Rx bits (read format; host to device) */ +#define RDES3_BUF1V (1 << 24) +#define RDES3_BUF2V (1 << 25) +#define RDES3_IC (1 << 30) +#define RDES3_OWN (1U << 31) + +/* Rx bits (writeback format; device to host) */ +#define RDES1_IP_PAYLOAD_TYPE 0x7 +#define RDES1_IP_PAYLOAD_UNKNOWN 0x0 +#define RDES1_IP_PAYLOAD_UDP 0x1 +#define RDES1_IP_PAYLOAD_TCP 0x2 +#define RDES1_IP_PAYLOAD_ICMP 0x3 +#define RDES1_IP_HDR_ERROR (1 << 3) +#define RDES1_IPV4_HDR (1 << 4) +#define RDES1_IPV6_HDR (1 << 5) +#define RDES1_IP_CSUM_BYPASS (1 << 6) +#define RDES1_IP_PAYLOAD_ERROR (1 << 7) +#define RDES3_LENGTH (0x7fff << 0) #define RDES3_ES (1 << 15) +#define RDES3_LENTYPE 0x70000 +#define RDES3_LENTYPE_LENGTH (0x0 << 16) +#define RDES3_LENTYPE_TYPE (0x1 << 16) + /* 0x2 is reserved */ +#define RDES3_LENTYPE_ARP (0x3 << 16) +#define RDES3_LENTYPE_VLAN (0x4 << 16) +#define RDES3_LENTYPE_2VLAN (0x5 << 16) +#define RDES3_LENTYPE_MACCTL (0x6 << 16) +#define RDES3_LENTYPE_OAM (0x7 << 16) #define RDES3_DE (1 << 19) #define RDES3_RE (1 << 20) #define RDES3_OE (1 << 21) #define RDES3_RWT (1 << 22) +#define RDES3_GP (1 << 23) #define RDES3_CE (1 << 24) -#define RDES3_BUF1V (1 << 24) -#define RDES3_IC (1 << 30) -#define RDES3_OWN (1U << 31) -#define RDES3_LENGTH (0x7fff << 0) +#define RDES3_RDES0_VALID (1 << 25) +#define RDES3_RDES1_VALID (1 << 26) +#define RDES3_RDES2_VALID (1 << 27) +#define RDES3_LD (1 << 28) +#define RDES3_FD (1 << 29) +#define RDES3_CTXT (1 << 30) +/* Bit 31 is the OWN bit, as in "read" format. */