From: jsg Date: Thu, 17 Apr 2014 07:52:08 +0000 (+0000) Subject: move enginetest to regress as was done with the other tests X-Git-Url: http://artulab.com/gitweb/?a=commitdiff_plain;h=87245febb11c105a86213cdf1e5bc485cda054ac;p=openbsd move enginetest to regress as was done with the other tests --- diff --git a/lib/libcrypto/engine/enginetest.c b/lib/libcrypto/engine/enginetest.c deleted file mode 100644 index f4d70e7e0a6..00000000000 --- a/lib/libcrypto/engine/enginetest.c +++ /dev/null @@ -1,283 +0,0 @@ -/* crypto/engine/enginetest.c */ -/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL - * project 2000. - */ -/* ==================================================================== - * Copyright (c) 1999-2001 The OpenSSL Project. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * 3. All advertising materials mentioning features or use of this - * software must display the following acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)" - * - * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to - * endorse or promote products derived from this software without - * prior written permission. For written permission, please contact - * licensing@OpenSSL.org. - * - * 5. Products derived from this software may not be called "OpenSSL" - * nor may "OpenSSL" appear in their names without prior written - * permission of the OpenSSL Project. - * - * 6. Redistributions of any form whatsoever must retain the following - * acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)" - * - * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY - * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR - * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * ==================================================================== - * - * This product includes cryptographic software written by Eric Young - * (eay@cryptsoft.com). This product includes software written by Tim - * Hudson (tjh@cryptsoft.com). - * - */ - -#include -#include -#include - -#ifdef OPENSSL_NO_ENGINE -int main(int argc, char *argv[]) -{ - printf("No ENGINE support\n"); - return(0); -} -#else -#include -#include -#include -#include - -static void display_engine_list(void) - { - ENGINE *h; - int loop; - - h = ENGINE_get_first(); - loop = 0; - printf("listing available engine types\n"); - while(h) - { - printf("engine %i, id = \"%s\", name = \"%s\"\n", - loop++, ENGINE_get_id(h), ENGINE_get_name(h)); - h = ENGINE_get_next(h); - } - printf("end of list\n"); - /* ENGINE_get_first() increases the struct_ref counter, so we - must call ENGINE_free() to decrease it again */ - ENGINE_free(h); - } - -int main(int argc, char *argv[]) - { - ENGINE *block[512]; - char buf[256]; - const char *id, *name; - ENGINE *ptr; - int loop; - int to_return = 1; - ENGINE *new_h1 = NULL; - ENGINE *new_h2 = NULL; - ENGINE *new_h3 = NULL; - ENGINE *new_h4 = NULL; - - /* enable memory leak checking unless explicitly disabled */ - if (!((getenv("OPENSSL_DEBUG_MEMORY") != NULL) && (0 == strcmp(getenv("OPENSSL_DEBUG_MEMORY"), "off")))) - { - CRYPTO_malloc_debug_init(); - CRYPTO_set_mem_debug_options(V_CRYPTO_MDEBUG_ALL); - } - else - { - /* OPENSSL_DEBUG_MEMORY=off */ - CRYPTO_set_mem_debug_functions(0, 0, 0, 0, 0); - } - CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON); - ERR_load_crypto_strings(); - - memset(block, 0, 512 * sizeof(ENGINE *)); - if(((new_h1 = ENGINE_new()) == NULL) || - !ENGINE_set_id(new_h1, "test_id0") || - !ENGINE_set_name(new_h1, "First test item") || - ((new_h2 = ENGINE_new()) == NULL) || - !ENGINE_set_id(new_h2, "test_id1") || - !ENGINE_set_name(new_h2, "Second test item") || - ((new_h3 = ENGINE_new()) == NULL) || - !ENGINE_set_id(new_h3, "test_id2") || - !ENGINE_set_name(new_h3, "Third test item") || - ((new_h4 = ENGINE_new()) == NULL) || - !ENGINE_set_id(new_h4, "test_id3") || - !ENGINE_set_name(new_h4, "Fourth test item")) - { - printf("Couldn't set up test ENGINE structures\n"); - goto end; - } - printf("\nenginetest beginning\n\n"); - display_engine_list(); - if(!ENGINE_add(new_h1)) - { - printf("Add failed!\n"); - goto end; - } - display_engine_list(); - ptr = ENGINE_get_first(); - if(!ENGINE_remove(ptr)) - { - printf("Remove failed!\n"); - goto end; - } - if (ptr) - ENGINE_free(ptr); - display_engine_list(); - if(!ENGINE_add(new_h3) || !ENGINE_add(new_h2)) - { - printf("Add failed!\n"); - goto end; - } - display_engine_list(); - if(!ENGINE_remove(new_h2)) - { - printf("Remove failed!\n"); - goto end; - } - display_engine_list(); - if(!ENGINE_add(new_h4)) - { - printf("Add failed!\n"); - goto end; - } - display_engine_list(); - if(ENGINE_add(new_h3)) - { - printf("Add *should* have failed but didn't!\n"); - goto end; - } - else - printf("Add that should fail did.\n"); - ERR_clear_error(); - if(ENGINE_remove(new_h2)) - { - printf("Remove *should* have failed but didn't!\n"); - goto end; - } - else - printf("Remove that should fail did.\n"); - ERR_clear_error(); - if(!ENGINE_remove(new_h3)) - { - printf("Remove failed!\n"); - goto end; - } - display_engine_list(); - if(!ENGINE_remove(new_h4)) - { - printf("Remove failed!\n"); - goto end; - } - display_engine_list(); - /* Depending on whether there's any hardware support compiled - * in, this remove may be destined to fail. */ - ptr = ENGINE_get_first(); - if(ptr) - if(!ENGINE_remove(ptr)) - printf("Remove failed!i - probably no hardware " - "support present.\n"); - if (ptr) - ENGINE_free(ptr); - display_engine_list(); - if(!ENGINE_add(new_h1) || !ENGINE_remove(new_h1)) - { - printf("Couldn't add and remove to an empty list!\n"); - goto end; - } - else - printf("Successfully added and removed to an empty list!\n"); - printf("About to beef up the engine-type list\n"); - for(loop = 0; loop < 512; loop++) - { - sprintf(buf, "id%i", loop); - id = BUF_strdup(buf); - sprintf(buf, "Fake engine type %i", loop); - name = BUF_strdup(buf); - if(((block[loop] = ENGINE_new()) == NULL) || - !ENGINE_set_id(block[loop], id) || - !ENGINE_set_name(block[loop], name)) - { - printf("Couldn't create block of ENGINE structures.\n" - "I'll probably also core-dump now, damn.\n"); - goto end; - } - } - for(loop = 0; loop < 512; loop++) - { - if(!ENGINE_add(block[loop])) - { - printf("\nAdding stopped at %i, (%s,%s)\n", - loop, ENGINE_get_id(block[loop]), - ENGINE_get_name(block[loop])); - goto cleanup_loop; - } - else - printf("."); fflush(stdout); - } -cleanup_loop: - printf("\nAbout to empty the engine-type list\n"); - while((ptr = ENGINE_get_first()) != NULL) - { - if(!ENGINE_remove(ptr)) - { - printf("\nRemove failed!\n"); - goto end; - } - ENGINE_free(ptr); - printf("."); fflush(stdout); - } - for(loop = 0; loop < 512; loop++) - { - OPENSSL_free((void *)ENGINE_get_id(block[loop])); - OPENSSL_free((void *)ENGINE_get_name(block[loop])); - } - printf("\nTests completed happily\n"); - to_return = 0; -end: - if(to_return) - ERR_print_errors_fp(stderr); - if(new_h1) ENGINE_free(new_h1); - if(new_h2) ENGINE_free(new_h2); - if(new_h3) ENGINE_free(new_h3); - if(new_h4) ENGINE_free(new_h4); - for(loop = 0; loop < 512; loop++) - if(block[loop]) - ENGINE_free(block[loop]); - ENGINE_cleanup(); - CRYPTO_cleanup_all_ex_data(); - ERR_free_strings(); - ERR_remove_thread_state(NULL); - CRYPTO_mem_leaks_fp(stderr); - return to_return; - } -#endif diff --git a/lib/libssl/src/crypto/engine/enginetest.c b/lib/libssl/src/crypto/engine/enginetest.c deleted file mode 100644 index f4d70e7e0a6..00000000000 --- a/lib/libssl/src/crypto/engine/enginetest.c +++ /dev/null @@ -1,283 +0,0 @@ -/* crypto/engine/enginetest.c */ -/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL - * project 2000. - */ -/* ==================================================================== - * Copyright (c) 1999-2001 The OpenSSL Project. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * 3. All advertising materials mentioning features or use of this - * software must display the following acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)" - * - * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to - * endorse or promote products derived from this software without - * prior written permission. For written permission, please contact - * licensing@OpenSSL.org. - * - * 5. Products derived from this software may not be called "OpenSSL" - * nor may "OpenSSL" appear in their names without prior written - * permission of the OpenSSL Project. - * - * 6. Redistributions of any form whatsoever must retain the following - * acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)" - * - * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY - * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR - * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * ==================================================================== - * - * This product includes cryptographic software written by Eric Young - * (eay@cryptsoft.com). This product includes software written by Tim - * Hudson (tjh@cryptsoft.com). - * - */ - -#include -#include -#include - -#ifdef OPENSSL_NO_ENGINE -int main(int argc, char *argv[]) -{ - printf("No ENGINE support\n"); - return(0); -} -#else -#include -#include -#include -#include - -static void display_engine_list(void) - { - ENGINE *h; - int loop; - - h = ENGINE_get_first(); - loop = 0; - printf("listing available engine types\n"); - while(h) - { - printf("engine %i, id = \"%s\", name = \"%s\"\n", - loop++, ENGINE_get_id(h), ENGINE_get_name(h)); - h = ENGINE_get_next(h); - } - printf("end of list\n"); - /* ENGINE_get_first() increases the struct_ref counter, so we - must call ENGINE_free() to decrease it again */ - ENGINE_free(h); - } - -int main(int argc, char *argv[]) - { - ENGINE *block[512]; - char buf[256]; - const char *id, *name; - ENGINE *ptr; - int loop; - int to_return = 1; - ENGINE *new_h1 = NULL; - ENGINE *new_h2 = NULL; - ENGINE *new_h3 = NULL; - ENGINE *new_h4 = NULL; - - /* enable memory leak checking unless explicitly disabled */ - if (!((getenv("OPENSSL_DEBUG_MEMORY") != NULL) && (0 == strcmp(getenv("OPENSSL_DEBUG_MEMORY"), "off")))) - { - CRYPTO_malloc_debug_init(); - CRYPTO_set_mem_debug_options(V_CRYPTO_MDEBUG_ALL); - } - else - { - /* OPENSSL_DEBUG_MEMORY=off */ - CRYPTO_set_mem_debug_functions(0, 0, 0, 0, 0); - } - CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON); - ERR_load_crypto_strings(); - - memset(block, 0, 512 * sizeof(ENGINE *)); - if(((new_h1 = ENGINE_new()) == NULL) || - !ENGINE_set_id(new_h1, "test_id0") || - !ENGINE_set_name(new_h1, "First test item") || - ((new_h2 = ENGINE_new()) == NULL) || - !ENGINE_set_id(new_h2, "test_id1") || - !ENGINE_set_name(new_h2, "Second test item") || - ((new_h3 = ENGINE_new()) == NULL) || - !ENGINE_set_id(new_h3, "test_id2") || - !ENGINE_set_name(new_h3, "Third test item") || - ((new_h4 = ENGINE_new()) == NULL) || - !ENGINE_set_id(new_h4, "test_id3") || - !ENGINE_set_name(new_h4, "Fourth test item")) - { - printf("Couldn't set up test ENGINE structures\n"); - goto end; - } - printf("\nenginetest beginning\n\n"); - display_engine_list(); - if(!ENGINE_add(new_h1)) - { - printf("Add failed!\n"); - goto end; - } - display_engine_list(); - ptr = ENGINE_get_first(); - if(!ENGINE_remove(ptr)) - { - printf("Remove failed!\n"); - goto end; - } - if (ptr) - ENGINE_free(ptr); - display_engine_list(); - if(!ENGINE_add(new_h3) || !ENGINE_add(new_h2)) - { - printf("Add failed!\n"); - goto end; - } - display_engine_list(); - if(!ENGINE_remove(new_h2)) - { - printf("Remove failed!\n"); - goto end; - } - display_engine_list(); - if(!ENGINE_add(new_h4)) - { - printf("Add failed!\n"); - goto end; - } - display_engine_list(); - if(ENGINE_add(new_h3)) - { - printf("Add *should* have failed but didn't!\n"); - goto end; - } - else - printf("Add that should fail did.\n"); - ERR_clear_error(); - if(ENGINE_remove(new_h2)) - { - printf("Remove *should* have failed but didn't!\n"); - goto end; - } - else - printf("Remove that should fail did.\n"); - ERR_clear_error(); - if(!ENGINE_remove(new_h3)) - { - printf("Remove failed!\n"); - goto end; - } - display_engine_list(); - if(!ENGINE_remove(new_h4)) - { - printf("Remove failed!\n"); - goto end; - } - display_engine_list(); - /* Depending on whether there's any hardware support compiled - * in, this remove may be destined to fail. */ - ptr = ENGINE_get_first(); - if(ptr) - if(!ENGINE_remove(ptr)) - printf("Remove failed!i - probably no hardware " - "support present.\n"); - if (ptr) - ENGINE_free(ptr); - display_engine_list(); - if(!ENGINE_add(new_h1) || !ENGINE_remove(new_h1)) - { - printf("Couldn't add and remove to an empty list!\n"); - goto end; - } - else - printf("Successfully added and removed to an empty list!\n"); - printf("About to beef up the engine-type list\n"); - for(loop = 0; loop < 512; loop++) - { - sprintf(buf, "id%i", loop); - id = BUF_strdup(buf); - sprintf(buf, "Fake engine type %i", loop); - name = BUF_strdup(buf); - if(((block[loop] = ENGINE_new()) == NULL) || - !ENGINE_set_id(block[loop], id) || - !ENGINE_set_name(block[loop], name)) - { - printf("Couldn't create block of ENGINE structures.\n" - "I'll probably also core-dump now, damn.\n"); - goto end; - } - } - for(loop = 0; loop < 512; loop++) - { - if(!ENGINE_add(block[loop])) - { - printf("\nAdding stopped at %i, (%s,%s)\n", - loop, ENGINE_get_id(block[loop]), - ENGINE_get_name(block[loop])); - goto cleanup_loop; - } - else - printf("."); fflush(stdout); - } -cleanup_loop: - printf("\nAbout to empty the engine-type list\n"); - while((ptr = ENGINE_get_first()) != NULL) - { - if(!ENGINE_remove(ptr)) - { - printf("\nRemove failed!\n"); - goto end; - } - ENGINE_free(ptr); - printf("."); fflush(stdout); - } - for(loop = 0; loop < 512; loop++) - { - OPENSSL_free((void *)ENGINE_get_id(block[loop])); - OPENSSL_free((void *)ENGINE_get_name(block[loop])); - } - printf("\nTests completed happily\n"); - to_return = 0; -end: - if(to_return) - ERR_print_errors_fp(stderr); - if(new_h1) ENGINE_free(new_h1); - if(new_h2) ENGINE_free(new_h2); - if(new_h3) ENGINE_free(new_h3); - if(new_h4) ENGINE_free(new_h4); - for(loop = 0; loop < 512; loop++) - if(block[loop]) - ENGINE_free(block[loop]); - ENGINE_cleanup(); - CRYPTO_cleanup_all_ex_data(); - ERR_free_strings(); - ERR_remove_thread_state(NULL); - CRYPTO_mem_leaks_fp(stderr); - return to_return; - } -#endif diff --git a/regress/lib/libcrypto/Makefile b/regress/lib/libcrypto/Makefile index c752bf042e0..02734e992e0 100644 --- a/regress/lib/libcrypto/Makefile +++ b/regress/lib/libcrypto/Makefile @@ -1,4 +1,4 @@ -# $OpenBSD: Makefile,v 1.1.1.1 2014/04/15 18:01:15 miod Exp $ +# $OpenBSD: Makefile,v 1.2 2014/04/17 07:52:08 jsg Exp $ SUBDIR= \ bf \ @@ -10,6 +10,7 @@ SUBDIR= \ ec \ ecdh \ ecdsa \ + engine \ evp \ exp \ hmac \ diff --git a/regress/lib/libcrypto/engine/Makefile b/regress/lib/libcrypto/engine/Makefile new file mode 100644 index 00000000000..c77c8b8e79d --- /dev/null +++ b/regress/lib/libcrypto/engine/Makefile @@ -0,0 +1,7 @@ +# $OpenBSD: Makefile,v 1.1 2014/04/17 07:52:08 jsg Exp $ + +PROG= enginetest +LDADD= -lcrypto +DPADD= ${LIBCRYPTO} + +.include diff --git a/regress/lib/libcrypto/engine/enginetest.c b/regress/lib/libcrypto/engine/enginetest.c new file mode 100644 index 00000000000..f4d70e7e0a6 --- /dev/null +++ b/regress/lib/libcrypto/engine/enginetest.c @@ -0,0 +1,283 @@ +/* crypto/engine/enginetest.c */ +/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL + * project 2000. + */ +/* ==================================================================== + * Copyright (c) 1999-2001 The OpenSSL Project. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * 3. All advertising materials mentioning features or use of this + * software must display the following acknowledgment: + * "This product includes software developed by the OpenSSL Project + * for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)" + * + * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to + * endorse or promote products derived from this software without + * prior written permission. For written permission, please contact + * licensing@OpenSSL.org. + * + * 5. Products derived from this software may not be called "OpenSSL" + * nor may "OpenSSL" appear in their names without prior written + * permission of the OpenSSL Project. + * + * 6. Redistributions of any form whatsoever must retain the following + * acknowledgment: + * "This product includes software developed by the OpenSSL Project + * for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)" + * + * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY + * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR + * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + * ==================================================================== + * + * This product includes cryptographic software written by Eric Young + * (eay@cryptsoft.com). This product includes software written by Tim + * Hudson (tjh@cryptsoft.com). + * + */ + +#include +#include +#include + +#ifdef OPENSSL_NO_ENGINE +int main(int argc, char *argv[]) +{ + printf("No ENGINE support\n"); + return(0); +} +#else +#include +#include +#include +#include + +static void display_engine_list(void) + { + ENGINE *h; + int loop; + + h = ENGINE_get_first(); + loop = 0; + printf("listing available engine types\n"); + while(h) + { + printf("engine %i, id = \"%s\", name = \"%s\"\n", + loop++, ENGINE_get_id(h), ENGINE_get_name(h)); + h = ENGINE_get_next(h); + } + printf("end of list\n"); + /* ENGINE_get_first() increases the struct_ref counter, so we + must call ENGINE_free() to decrease it again */ + ENGINE_free(h); + } + +int main(int argc, char *argv[]) + { + ENGINE *block[512]; + char buf[256]; + const char *id, *name; + ENGINE *ptr; + int loop; + int to_return = 1; + ENGINE *new_h1 = NULL; + ENGINE *new_h2 = NULL; + ENGINE *new_h3 = NULL; + ENGINE *new_h4 = NULL; + + /* enable memory leak checking unless explicitly disabled */ + if (!((getenv("OPENSSL_DEBUG_MEMORY") != NULL) && (0 == strcmp(getenv("OPENSSL_DEBUG_MEMORY"), "off")))) + { + CRYPTO_malloc_debug_init(); + CRYPTO_set_mem_debug_options(V_CRYPTO_MDEBUG_ALL); + } + else + { + /* OPENSSL_DEBUG_MEMORY=off */ + CRYPTO_set_mem_debug_functions(0, 0, 0, 0, 0); + } + CRYPTO_mem_ctrl(CRYPTO_MEM_CHECK_ON); + ERR_load_crypto_strings(); + + memset(block, 0, 512 * sizeof(ENGINE *)); + if(((new_h1 = ENGINE_new()) == NULL) || + !ENGINE_set_id(new_h1, "test_id0") || + !ENGINE_set_name(new_h1, "First test item") || + ((new_h2 = ENGINE_new()) == NULL) || + !ENGINE_set_id(new_h2, "test_id1") || + !ENGINE_set_name(new_h2, "Second test item") || + ((new_h3 = ENGINE_new()) == NULL) || + !ENGINE_set_id(new_h3, "test_id2") || + !ENGINE_set_name(new_h3, "Third test item") || + ((new_h4 = ENGINE_new()) == NULL) || + !ENGINE_set_id(new_h4, "test_id3") || + !ENGINE_set_name(new_h4, "Fourth test item")) + { + printf("Couldn't set up test ENGINE structures\n"); + goto end; + } + printf("\nenginetest beginning\n\n"); + display_engine_list(); + if(!ENGINE_add(new_h1)) + { + printf("Add failed!\n"); + goto end; + } + display_engine_list(); + ptr = ENGINE_get_first(); + if(!ENGINE_remove(ptr)) + { + printf("Remove failed!\n"); + goto end; + } + if (ptr) + ENGINE_free(ptr); + display_engine_list(); + if(!ENGINE_add(new_h3) || !ENGINE_add(new_h2)) + { + printf("Add failed!\n"); + goto end; + } + display_engine_list(); + if(!ENGINE_remove(new_h2)) + { + printf("Remove failed!\n"); + goto end; + } + display_engine_list(); + if(!ENGINE_add(new_h4)) + { + printf("Add failed!\n"); + goto end; + } + display_engine_list(); + if(ENGINE_add(new_h3)) + { + printf("Add *should* have failed but didn't!\n"); + goto end; + } + else + printf("Add that should fail did.\n"); + ERR_clear_error(); + if(ENGINE_remove(new_h2)) + { + printf("Remove *should* have failed but didn't!\n"); + goto end; + } + else + printf("Remove that should fail did.\n"); + ERR_clear_error(); + if(!ENGINE_remove(new_h3)) + { + printf("Remove failed!\n"); + goto end; + } + display_engine_list(); + if(!ENGINE_remove(new_h4)) + { + printf("Remove failed!\n"); + goto end; + } + display_engine_list(); + /* Depending on whether there's any hardware support compiled + * in, this remove may be destined to fail. */ + ptr = ENGINE_get_first(); + if(ptr) + if(!ENGINE_remove(ptr)) + printf("Remove failed!i - probably no hardware " + "support present.\n"); + if (ptr) + ENGINE_free(ptr); + display_engine_list(); + if(!ENGINE_add(new_h1) || !ENGINE_remove(new_h1)) + { + printf("Couldn't add and remove to an empty list!\n"); + goto end; + } + else + printf("Successfully added and removed to an empty list!\n"); + printf("About to beef up the engine-type list\n"); + for(loop = 0; loop < 512; loop++) + { + sprintf(buf, "id%i", loop); + id = BUF_strdup(buf); + sprintf(buf, "Fake engine type %i", loop); + name = BUF_strdup(buf); + if(((block[loop] = ENGINE_new()) == NULL) || + !ENGINE_set_id(block[loop], id) || + !ENGINE_set_name(block[loop], name)) + { + printf("Couldn't create block of ENGINE structures.\n" + "I'll probably also core-dump now, damn.\n"); + goto end; + } + } + for(loop = 0; loop < 512; loop++) + { + if(!ENGINE_add(block[loop])) + { + printf("\nAdding stopped at %i, (%s,%s)\n", + loop, ENGINE_get_id(block[loop]), + ENGINE_get_name(block[loop])); + goto cleanup_loop; + } + else + printf("."); fflush(stdout); + } +cleanup_loop: + printf("\nAbout to empty the engine-type list\n"); + while((ptr = ENGINE_get_first()) != NULL) + { + if(!ENGINE_remove(ptr)) + { + printf("\nRemove failed!\n"); + goto end; + } + ENGINE_free(ptr); + printf("."); fflush(stdout); + } + for(loop = 0; loop < 512; loop++) + { + OPENSSL_free((void *)ENGINE_get_id(block[loop])); + OPENSSL_free((void *)ENGINE_get_name(block[loop])); + } + printf("\nTests completed happily\n"); + to_return = 0; +end: + if(to_return) + ERR_print_errors_fp(stderr); + if(new_h1) ENGINE_free(new_h1); + if(new_h2) ENGINE_free(new_h2); + if(new_h3) ENGINE_free(new_h3); + if(new_h4) ENGINE_free(new_h4); + for(loop = 0; loop < 512; loop++) + if(block[loop]) + ENGINE_free(block[loop]); + ENGINE_cleanup(); + CRYPTO_cleanup_all_ex_data(); + ERR_free_strings(); + ERR_remove_thread_state(NULL); + CRYPTO_mem_leaks_fp(stderr); + return to_return; + } +#endif