From: smurph Date: Wed, 22 Mar 2000 04:01:07 +0000 (+0000) Subject: new ahc driver. Adds support for newer Adaptec controllers. This represents two... X-Git-Url: http://artulab.com/gitweb/?a=commitdiff_plain;h=7ce54d2df2c257ae5f702bb33b45513f53606ea7;p=openbsd new ahc driver. Adds support for newer Adaptec controllers. This represents two months of work. --- diff --git a/sys/dev/pci/ahc_pci.c b/sys/dev/pci/ahc_pci.c index a4f9091a754..9158bea15d0 100644 --- a/sys/dev/pci/ahc_pci.c +++ b/sys/dev/pci/ahc_pci.c @@ -1,4 +1,4 @@ -/* $OpenBSD: ahc_pci.c,v 1.12 2000/01/31 01:50:55 weingart Exp $ */ +/* $OpenBSD: ahc_pci.c,v 1.13 2000/03/22 04:01:07 smurph Exp $ */ /* $NetBSD: ahc_pci.c,v 1.9 1996/10/21 22:56:24 thorpej Exp $ */ /* @@ -33,42 +33,24 @@ * SUCH DAMAGE. */ -#if defined(__FreeBSD__) -#include -#endif -#if NPCI > 0 || defined(__NetBSD__) || defined(__OpenBSD__) #include #include #include #include #include -#if defined(__NetBSD__) || defined(__OpenBSD__) #include #include #include -#endif /* defined(__NetBSD__) */ #include #include -#if defined(__FreeBSD__) - -#include -#include - -#include - -#include -#include - -#include - -#define PCI_BASEADR0 PCI_MAP_REG_START - -#elif defined(__NetBSD__) || defined(__OpenBSD__) - #include #include +#include + +#define AHC_PCI_IOADDR PCI_MAPREG_START /* I/O Address */ +#define AHC_PCI_MEMADDR (PCI_MAPREG_START + 4) /* Mem I/O Address */ #include #include @@ -86,392 +68,388 @@ #define PCI_BASEADR0 PCI_MAPREG_START -#endif /* defined(__NetBSD__) */ - -#define PCI_DEVICE_ID_ADAPTEC_3940U 0x82789004ul -#define PCI_DEVICE_ID_ADAPTEC_398XU 0x83789004ul -#define PCI_DEVICE_ID_ADAPTEC_2944U 0x84789004ul -#define PCI_DEVICE_ID_ADAPTEC_2940U 0x81789004ul -#define PCI_DEVICE_ID_ADAPTEC_2940AU 0x61789004ul -#define PCI_DEVICE_ID_ADAPTEC_3940 0x72789004ul -#define PCI_DEVICE_ID_ADAPTEC_2944 0x74789004ul -#define PCI_DEVICE_ID_ADAPTEC_2940 0x71789004ul -#define PCI_DEVICE_ID_ADAPTEC_AIC7880 0x80789004ul -#define PCI_DEVICE_ID_ADAPTEC_AIC7870 0x70789004ul -#define PCI_DEVICE_ID_ADAPTEC_AIC7860 0x60789004ul -#define PCI_DEVICE_ID_ADAPTEC_AIC7855 0x55789004ul -#define PCI_DEVICE_ID_ADAPTEC_AIC7850 0x50789004ul -#define PCI_DEVICE_ID_ADAPTEC_2940UWPro 0x87789004ul +#define AHC_394X_SLOT_CHANNEL_A 4 +#define AHC_394X_SLOT_CHANNEL_B 5 + +#define AHC_398X_SLOT_CHANNEL_A 4 +#define AHC_398X_SLOT_CHANNEL_B 8 +#define AHC_398X_SLOT_CHANNEL_C 12 #define DEVCONFIG 0x40 -#define MPORTMODE 0x00000400ul /* aic7870 only */ -#define RAMPSM 0x00000200ul /* aic7870 only */ -#define VOLSENSE 0x00000100ul -#define SCBRAMSEL 0x00000080ul -#define MRDCEN 0x00000040ul -#define EXTSCBTIME 0x00000020ul /* aic7870 only */ -#define EXTSCBPEN 0x00000010ul /* aic7870 only */ -#define BERREN 0x00000008ul -#define DACEN 0x00000004ul -#define STPWLEVEL 0x00000002ul -#define DIFACTNEGEN 0x00000001ul /* aic7870 only */ +#define SCBSIZE32 0x00010000UL /* aic789X only */ +#define MPORTMODE 0x00000400UL /* aic7870 only */ +#define RAMPSM 0x00000200UL /* aic7870 only */ +#define VOLSENSE 0x00000100UL +#define SCBRAMSEL 0x00000080UL +#define PCI64 0x00000080UL /* aic7891 & aic7897 only */ +#define MRDCEN 0x00000040UL +#define EXTSCBTIME 0x00000020UL /* aic7870 only */ +#define EXTSCBPEN 0x00000010UL /* aic7870 & aic7890 only */ +#define BERREN 0x00000008UL +#define DACEN 0x00000004UL +#define STPWLEVEL 0x00000002UL +#define DIFACTNEGEN 0x00000001UL /* aic7870 only */ #define CSIZE_LATTIME 0x0c #define CACHESIZE 0x0000003ful /* only 5 bits */ #define LATTIME 0x0000ff00ul -/* - * Define the format of the aic78X0 SEEPROM registers (16 bits). - * - */ - -struct seeprom_config { - -/* - * SCSI ID Configuration Flags - */ -#define CFXFER 0x0007 /* synchronous transfer rate */ -#define CFSYNCH 0x0008 /* enable synchronous transfer */ -#define CFDISC 0x0010 /* enable disconnection */ -#define CFWIDEB 0x0020 /* wide bus device */ -/* UNUSED 0x00C0 */ -#define CFSTART 0x0100 /* send start unit SCSI command */ -#define CFINCBIOS 0x0200 /* include in BIOS scan */ -#define CFRNFOUND 0x0400 /* report even if not found */ -/* UNUSED 0xf800 */ - u_int16_t device_flags[16]; /* words 0-15 */ - -/* - * BIOS Control Bits - */ -#define CFSUPREM 0x0001 /* support all removeable drives */ -#define CFSUPREMB 0x0002 /* support removeable drives for boot only */ -#define CFBIOSEN 0x0004 /* BIOS enabled */ -/* UNUSED 0x0008 */ -#define CFSM2DRV 0x0010 /* support more than two drives */ -/* UNUSED 0x0060 */ -#define CFEXTEND 0x0080 /* extended translation enabled */ -/* UNUSED 0xff00 */ - u_int16_t bios_control; /* word 16 */ - -/* - * Host Adapter Control Bits - */ -/* UNUSED 0x0001 */ -#define CFULTRAEN 0x0002 /* Ultra SCSI speed enable (Ultra cards) */ -#define CFSTERM 0x0004 /* SCSI low byte termination (non-wide cards) */ -#define CFWSTERM 0x0008 /* SCSI high byte termination (wide card) */ -#define CFSPARITY 0x0010 /* SCSI parity */ -/* UNUSED 0x0020 */ -#define CFRESETB 0x0040 /* reset SCSI bus at IC initialization */ -/* UNUSED 0xff80 */ - u_int16_t adapter_control; /* word 17 */ - -/* - * Bus Release, Host Adapter ID - */ -#define CFSCSIID 0x000f /* host adapter SCSI ID */ -/* UNUSED 0x00f0 */ -#define CFBRTIME 0xff00 /* bus release time */ - u_int16_t brtime_id; /* word 18 */ - -/* - * Maximum targets - */ -#define CFMAXTARG 0x00ff /* maximum targets */ -/* UNUSED 0xff00 */ - u_int16_t max_targets; /* word 19 */ - - u_int16_t res_1[11]; /* words 20-30 */ - u_int16_t checksum; /* word 31 */ -}; - -static void load_seeprom __P((struct ahc_data *ahc)); -static int acquire_seeprom __P((struct seeprom_descriptor *sd)); +int ahc_pci_intr __P((struct ahc_softc *ahc)); +static int ahc_ext_scbram_present __P((struct ahc_softc *ahc)); +static void ahc_ext_scbram_config __P((struct ahc_softc *ahc, int enable, + int pcheck, int fast)); +static void ahc_probe_ext_scbram __P((struct ahc_softc *ahc)); +static void check_extport __P((struct ahc_softc *ahc, u_int *sxfrctl1)); +static void configure_termination __P((struct ahc_softc *ahc, + struct seeprom_descriptor *sd, + u_int adapter_control, + u_int *sxfrctl1)); +static void ahc_new_term_detect __P((struct ahc_softc *ahc, + int *enableSEC_low, + int *enableSEC_high, + int *enablePRI_low, + int *enablePRI_high, + int *eeprom_present)); +static void aic787X_cable_detect __P((struct ahc_softc *ahc, + int *internal50_present, + int *internal68_present, + int *externalcable_present, + int *eeprom_present)); +static void aic785X_cable_detect __P((struct ahc_softc *ahc, + int *internal50_present, + int *externalcable_present, + int *eeprom_present)); +static void write_brdctl __P((struct ahc_softc *ahc, u_int8_t value)); +static u_int8_t read_brdctl __P((struct ahc_softc *ahc)); + +void load_seeprom __P((struct ahc_softc *ahc)); +static int acquire_seeprom __P((struct ahc_softc *ahc, + struct seeprom_descriptor *sd)); static void release_seeprom __P((struct seeprom_descriptor *sd)); +int ahc_probe_scbs __P((struct ahc_softc *ahc)); static u_char aic3940_count; -#if defined(__FreeBSD__) - -static char* aic7870_probe __P((pcici_t tag, pcidi_t type)); -static void aic7870_attach __P((pcici_t config_id, int unit)); - -static struct pci_device ahc_pci_driver = { - "ahc", - aic7870_probe, - aic7870_attach, - &ahc_unit, - NULL -}; - -DATA_SET (pcidevice_set, ahc_pci_driver); - -static char* -aic7870_probe (pcici_t tag, pcidi_t type) -{ - switch(type) { - case PCI_DEVICE_ID_ADAPTEC_3940U: - return ("Adaptec 3940 Ultra SCSI host adapter"); - break; - case PCI_DEVICE_ID_ADAPTEC_3940: - return ("Adaptec 3940 SCSI host adapter"); - break; - case PCI_DEVICE_ID_ADAPTEC_2944U: - return ("Adaptec 2944 Ultra SCSI host adapter"); - break; - case PCI_DEVICE_ID_ADAPTEC_2940U: - return ("Adaptec 2940 Ultra SCSI host adapter"); - break; - case PCI_DEVICE_ID_ADAPTEC_2944: - return ("Adaptec 2944 SCSI host adapter"); - break; - case PCI_DEVICE_ID_ADAPTEC_2940: - return ("Adaptec 2940 SCSI host adapter"); - break; - case PCI_DEVICE_ID_ADAPTEC_2940AU: - return ("Adaptec 2940A Ultra SCSI host adapter"); - break; - case PCI_DEVICE_ID_ADAPTEC_AIC7880: - return ("Adaptec aic7880 Ultra SCSI host adapter"); - break; - case PCI_DEVICE_ID_ADAPTEC_AIC7870: - return ("Adaptec aic7870 SCSI host adapter"); - break; - case PCI_DEVICE_ID_ADAPTEC_AIC7860: - return ("Adaptec aic7860 SCSI host adapter"); - break; - case PCI_DEVICE_ID_ADAPTEC_AIC7855: - return ("Adaptec aic7855 SCSI host adapter"); - break; - case PCI_DEVICE_ID_ADAPTEC_2940UWPro: - return ("Adaptec 2940UW Pro Ultra SCSI host adapter"); - break; - case PCI_DEVICE_ID_ADAPTEC_AIC7850: - return ("Adaptec aic7850 SCSI host adapter"); - break; - default: - break; - } - return (0); - -} - -#elif defined(__NetBSD__) || defined(__OpenBSD__) - int ahc_pci_probe __P((struct device *, void *, void *)); void ahc_pci_attach __P((struct device *, struct device *, void *)); struct cfattach ahc_pci_ca = { - sizeof(struct ahc_data), ahc_pci_probe, ahc_pci_attach + sizeof(struct ahc_softc), ahc_pci_probe, ahc_pci_attach +}; + +struct ahc_pci_data { + pci_chipset_tag_t pc; + pcitag_t tag; + u_int function; }; int ahc_pci_probe(parent, match, aux) - struct device *parent; - void *match, *aux; -{ - struct pci_attach_args *pa = aux; - - switch (pa->pa_id) { - case PCI_DEVICE_ID_ADAPTEC_3940U: - case PCI_DEVICE_ID_ADAPTEC_398XU: - case PCI_DEVICE_ID_ADAPTEC_2944U: - case PCI_DEVICE_ID_ADAPTEC_2940U: - case PCI_DEVICE_ID_ADAPTEC_2940AU: - case PCI_DEVICE_ID_ADAPTEC_3940: - case PCI_DEVICE_ID_ADAPTEC_2944: - case PCI_DEVICE_ID_ADAPTEC_2940: - case PCI_DEVICE_ID_ADAPTEC_AIC7880: - case PCI_DEVICE_ID_ADAPTEC_AIC7870: - case PCI_DEVICE_ID_ADAPTEC_AIC7860: - case PCI_DEVICE_ID_ADAPTEC_AIC7855: - case PCI_DEVICE_ID_ADAPTEC_AIC7850: - case PCI_DEVICE_ID_ADAPTEC_2940UWPro: - return 1; +struct device *parent; +void *match, *aux; +{ + struct pci_attach_args *pa = aux; + + switch (PCI_VENDOR(pa->pa_id)) { + case PCI_VENDOR_ADP: + switch (PCI_PRODUCT(pa->pa_id)) { + case PCI_PRODUCT_ADP_AIC7810: + case PCI_PRODUCT_ADP_AIC7850: + case PCI_PRODUCT_ADP_AIC7855: + case PCI_PRODUCT_ADP_AIC5900: + case PCI_PRODUCT_ADP_AIC5905: + case PCI_PRODUCT_ADP_AIC7860: + case PCI_PRODUCT_ADP_2940AU: + case PCI_PRODUCT_ADP_AIC7870: + case PCI_PRODUCT_ADP_2940: + case PCI_PRODUCT_ADP_3940: + case PCI_PRODUCT_ADP_3985: + case PCI_PRODUCT_ADP_2944: + case PCI_PRODUCT_ADP_AIC7880: + case PCI_PRODUCT_ADP_2940U: + case PCI_PRODUCT_ADP_3940U: + case PCI_PRODUCT_ADP_398XU: + case PCI_PRODUCT_ADP_2944U: + case PCI_PRODUCT_ADP_2940UWPro: + case PCI_PRODUCT_ADP_AIC6915: + case PCI_PRODUCT_ADP_7895: + return (1); + } + break; + case PCI_VENDOR_ADP2: + switch (PCI_PRODUCT(pa->pa_id)) { + case PCI_PRODUCT_ADP2_2940U2: + case PCI_PRODUCT_ADP2_AIC7890: + case PCI_PRODUCT_ADP2_AIC7892: + case PCI_PRODUCT_ADP2_29160: + case PCI_PRODUCT_ADP2_19160B: + case PCI_PRODUCT_ADP2_3950U2B: + case PCI_PRODUCT_ADP2_3950U2D: + case PCI_PRODUCT_ADP2_AIC7896: + case PCI_PRODUCT_ADP2_AIC7899: + case PCI_PRODUCT_ADP2_3960D: + return (1); + } + break; } - return 0; + return (0); } -#endif /* defined(__NetBSD__) */ -#if defined(__FreeBSD__) -static void -aic7870_attach(config_id, unit) - pcici_t config_id; - int unit; -#elif defined(__NetBSD__) || defined(__OpenBSD__) -void +void ahc_pci_attach(parent, self, aux) - struct device *parent, *self; - void *aux; -#endif +struct device *parent, *self; +void *aux; { -#if defined(__FreeBSD__) - u_long io_port; - int unit = ahc->sc_dev.dv_unit; -#elif defined(__NetBSD__) || defined(__OpenBSD__) struct pci_attach_args *pa = aux; - struct ahc_data *ahc = (void *)self; - bus_addr_t iobase; - bus_size_t iosize; + struct ahc_softc *ahc = (void *)self; + bus_space_tag_t iot; bus_space_handle_t ioh; +#ifdef AHC_ALLOW_MEMIO + bus_space_tag_t memt; + bus_space_handle_t memh; + int memh_valid; +#endif pci_intr_handle_t ih; + pcireg_t command; const char *intrstr; -#endif - u_long id; unsigned opri = 0; - ahc_type ahc_t = AHC_NONE; - ahc_flag ahc_f = AHC_FNONE; -#if defined(__FreeBSD__) - struct ahc_data *ahc; -#endif + ahc_chip ahc_c = AHC_PCI; /* we are a PCI controller */ + ahc_flag ahc_flags = AHC_FNONE; + ahc_feature ahc_f = AHC_FENONE; + int ioh_valid; + u_char ultra_enb = 0; u_char our_id = 0; - -#if defined(__FreeBSD__) - if(!(io_port = pci_conf_read(config_id, PCI_BASEADR0))) - return; - /* - * The first bit of PCI_BASEADR0 is always - * set hence we mask it off. - */ - io_port &= 0xfffffffe; -#elif defined(__NetBSD__) || defined(__OpenBSD__) - if (pci_io_find(pa->pa_pc, pa->pa_tag, PCI_BASEADR0, &iobase, &iosize)) - return; - if (bus_space_map(pa->pa_iot, iobase, iosize, 0, &ioh)) - return; -#endif - -#if defined(__FreeBSD__) - switch ((id = pci_conf_read(config_id, PCI_ID_REG))) { -#elif defined(__NetBSD__) || defined(__OpenBSD__) - switch (id = pa->pa_id) { -#endif - case PCI_DEVICE_ID_ADAPTEC_3940U: - case PCI_DEVICE_ID_ADAPTEC_3940: - if (id == PCI_DEVICE_ID_ADAPTEC_3940U) - ahc_t = AHC_394U; - else - ahc_t = AHC_394; + u_char channel = 'A'; + u_int sxfrctl1; + u_int scsiseq; + /* So we can access PCI configuration space after init */ + struct ahc_pci_data *pd; + + ahc->sc_dmat = pa->pa_dmat; + + command = pci_conf_read(pa->pa_pc, pa->pa_tag, + PCI_COMMAND_STATUS_REG); + + switch (PCI_VENDOR(pa->pa_id)) { + case PCI_VENDOR_ADP: + switch (PCI_PRODUCT(pa->pa_id)) { + case PCI_PRODUCT_ADP_7895: + { + pcireg_t devconfig; + channel = pa->pa_function == 1 ? 'B' : 'A'; + ahc_c |= AHC_AIC7895; + /* The 'C' revision of the aic7895 + has a few additional features */ + if (PCI_REVISION(pa->pa_class) >= 4) + ahc_f = AHC_AIC7895C_FE; + else + ahc_f = AHC_AIC7895_FE; + ahc_flags |= AHC_NEWEEPROM_FMT; + devconfig = pci_conf_read(pa->pa_pc, + pa->pa_tag, + DEVCONFIG); + devconfig &= ~SCBSIZE32; + pci_conf_write(pa->pa_pc, pa->pa_tag, + DEVCONFIG, devconfig); + } + break; + case PCI_PRODUCT_ADP_3940U: + case PCI_PRODUCT_ADP_3940: + if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ADP_3940U) { + ahc_c |= AHC_AIC7880; + ahc_f = AHC_AIC7880_FE; + } else { + ahc_c |= AHC_AIC7870; + ahc_f = AHC_AIC7870_FE; + } aic3940_count++; - if(!(aic3940_count & 0x01)) + if (!(aic3940_count & 0x01)) /* Even count implies second channel */ - ahc_f |= AHC_CHNLB; + channel = 'B'; break; - case PCI_DEVICE_ID_ADAPTEC_2944U: - case PCI_DEVICE_ID_ADAPTEC_2940U: - case PCI_DEVICE_ID_ADAPTEC_2940UWPro: - ahc_t = AHC_294U; + case PCI_PRODUCT_ADP_2940UWPro: + ahc_c |= AHC_AIC7880; + ahc_f = AHC_AIC7880_FE; + ahc_f |= AHC_INT50_SPEEDFLEX; + case PCI_PRODUCT_ADP_2944U: + case PCI_PRODUCT_ADP_2940U: + ahc_c |= AHC_AIC7880; + ahc_f = AHC_AIC7880_FE; break; - case PCI_DEVICE_ID_ADAPTEC_2944: - case PCI_DEVICE_ID_ADAPTEC_2940: - ahc_t = AHC_294; + case PCI_PRODUCT_ADP_2944: + case PCI_PRODUCT_ADP_2940: + ahc_c |= AHC_AIC7870; + ahc_f = AHC_AIC7870_FE; break; - case PCI_DEVICE_ID_ADAPTEC_2940AU: - ahc_t = AHC_294AU; + case PCI_PRODUCT_ADP_2940AU: + ahc_c |= AHC_AIC7860; + ahc_f = AHC_AIC7860_FE; break; - case PCI_DEVICE_ID_ADAPTEC_398XU: /* XXX */ - case PCI_DEVICE_ID_ADAPTEC_AIC7880: - ahc_t = AHC_AIC7880; + case PCI_PRODUCT_ADP_398XU: /* XXX */ + case PCI_PRODUCT_ADP_AIC7880: + ahc_c |= AHC_AIC7880; + ahc_f = AHC_AIC7880_FE; break; - case PCI_DEVICE_ID_ADAPTEC_AIC7870: - ahc_t = AHC_AIC7870; + case PCI_PRODUCT_ADP_AIC7870: + ahc_c |= AHC_AIC7870; + ahc_f = AHC_AIC7870_FE; break; - case PCI_DEVICE_ID_ADAPTEC_AIC7860: - ahc_t = AHC_AIC7860; + case PCI_PRODUCT_ADP_AIC7860: + ahc_c |= AHC_AIC7860; + ahc_f = AHC_AIC7860_FE; break; - case PCI_DEVICE_ID_ADAPTEC_AIC7855: - case PCI_DEVICE_ID_ADAPTEC_AIC7850: - ahc_t = AHC_AIC7850; + case PCI_PRODUCT_ADP_AIC7855: + case PCI_PRODUCT_ADP_AIC7850: + ahc_c |= AHC_AIC7850; + ahc_f = AHC_AIC7850_FE; break; default: + /* TTT */ break; } - - /* On all PCI adapters, we allow SCB paging */ - ahc_f |= AHC_PAGESCBS; - - /* Remeber how the card was setup in case there is no SEEPROM */ -#if defined(__FreeBSD__) - our_id = inb(SCSIID + io_port) & OID; - if(ahc_t & AHC_ULTRA) - ultra_enb = inb(SXFRCTL0 + io_port) & ULTRAEN; -#else - our_id = bus_space_read_1(pa->pa_iot, ioh, SCSIID) & OID; - if(ahc_t & AHC_ULTRA) - ultra_enb = bus_space_read_1(pa->pa_iot, ioh, SXFRCTL0) & - ULTRAEN; + break; + case PCI_VENDOR_ADP2: + switch (PCI_PRODUCT(pa->pa_id)) { + case PCI_PRODUCT_ADP2_AIC7890: + case PCI_PRODUCT_ADP2_2940U2: + ahc_c |= AHC_AIC7890; + ahc_f = AHC_AIC7890_FE; + ahc_flags |= AHC_NEWEEPROM_FMT; + break; + case PCI_PRODUCT_ADP2_AIC7892: + case PCI_PRODUCT_ADP2_29160: + case PCI_PRODUCT_ADP2_19160B: + ahc_c |= AHC_AIC7892; + ahc_f = AHC_AIC7892_FE; + ahc_flags |= AHC_NEWEEPROM_FMT; + break; + case PCI_PRODUCT_ADP2_3950U2B: + case PCI_PRODUCT_ADP2_3950U2D: + case PCI_PRODUCT_ADP2_AIC7896: + { + pcireg_t devconfig; + channel = pa->pa_function == 1 ? 'B' : 'A'; + ahc_c |= AHC_AIC7896; + ahc_f = AHC_AIC7896_FE; + ahc_flags |= AHC_NEWEEPROM_FMT; + devconfig = pci_conf_read(pa->pa_pc, + pa->pa_tag, + DEVCONFIG); + /* turn off 64 bit for now XXX smurph */ + devconfig &= ~PCI64; + pci_conf_write(pa->pa_pc, pa->pa_tag, + DEVCONFIG, devconfig); + } + break; + case PCI_PRODUCT_ADP2_AIC7899: + case PCI_PRODUCT_ADP2_3960D: + ahc_c |= AHC_AIC7899; + ahc_f = AHC_AIC7899_FE; + ahc_flags |= AHC_NEWEEPROM_FMT; + break; + default: + /* TTT */ + } + } + +#ifdef AHC_ALLOW_MEMIO + memh_valid = (pci_mapreg_map(pa, AHC_PCI_MEMADDR, + PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT, 0, + &memt, &memh, NULL, NULL) == 0); #endif - -#if defined(__FreeBSD__) - ahc_reset(io_port); -#elif defined(__NetBSD__) || defined(__OpenBSD__) - ahc_reset(ahc->sc_dev.dv_xname, pa->pa_iot, ioh); + ioh_valid = (pci_mapreg_map(pa, AHC_PCI_IOADDR, + PCI_MAPREG_TYPE_IO, 0, &iot, &ioh, NULL, NULL) == 0); + + if (ioh_valid) { + /* do nothing */ +#ifdef AHC_ALLOW_MEMIO + } else if (memh_valid) { + /* do nothing */ #endif + } else { + /* error out */ + printf(": unable to map registers\n"); + return; + } + + /* Ensure busmastering is enabled */ + command |= PCI_COMMAND_MASTER_ENABLE; + pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, command); + + pd = malloc(sizeof (struct ahc_pci_data), M_DEVBUF, M_NOWAIT); + if (pd == NULL) { + printf(": error allocating pci data\n"); + return; + } - if(ahc_t & AHC_AIC7870){ -#if defined(__FreeBSD__) - u_long devconfig = pci_conf_read(config_id, DEVCONFIG); -#elif defined(__NetBSD__) || defined(__OpenBSD__) - u_long devconfig = - pci_conf_read(pa->pa_pc, pa->pa_tag, DEVCONFIG); -#endif + pd->pc = pa->pa_pc; + pd->tag = pa->pa_tag; + pd->function = pa->pa_function; + + /* setup the PCI stuff */ + ahc->pci_data = pd; + ahc->pci_intr_func = ahc_pci_intr; - if(devconfig & (RAMPSM)) { - /* - * External SRAM present. Have the probe walk - * the SCBs to see how much SRAM we have and set - * the number of SCBs accordingly. We have to - * turn off SCBRAMSEL to access the external - * SCB SRAM. - * - * It seems that early versions of the aic7870 - * didn't use these bits, hence the hack for the - * 3940 above. I would guess that recent 3940s - * using later aic7870 or aic7880 chips do - * actually set RAMPSM. - * - * The documentation isn't clear, but it sounds - * like the value written to devconfig must not - * have RAMPSM set. The second sixteen bits of - * the register are R/O anyway, so it shouldn't - * affect RAMPSM either way. - */ - devconfig &= ~(RAMPSM|SCBRAMSEL); -#if defined(__FreeBSD__) - pci_conf_write(config_id, DEVCONFIG, devconfig); -#elif defined(__NetBSD__) || defined(__OpenBSD__) - pci_conf_write(pa->pa_pc, pa->pa_tag, - DEVCONFIG, devconfig); -#endif - } - } -#if defined(__FreeBSD__) - if(!(ahc = ahc_alloc(unit, io_port, ahc_t, ahc_f))) - return; /* XXX PCI code should take return status */ + /* On all PCI adapters, we allow SCB paging */ + ahc_flags |= AHC_PAGESCBS; + + ahc_construct(ahc, pa->pa_iot, ioh, ahc_c, ahc_flags, ahc_f, channel); + /* Now we can use the ahc_inb and ahc_outb macros */ - if(!(pci_map_int(config_id, ahc_intr, (void *)ahc, &bio_imask))) { + /* setup the PCI error interrupt handler */ + ahc->pci_intr_func = &ahc_pci_intr; + + /* Remeber how the card was setup in case there is no SEEPROM */ + ahc_outb(ahc, HCNTRL, ahc->pause); + if ((ahc->features & AHC_ULTRA2) != 0) + our_id = ahc_inb(ahc, SCSIID_ULTRA2) & OID; + else + our_id = ahc_inb(ahc, SCSIID) & OID; + sxfrctl1 = ahc_inb(ahc, SXFRCTL1) & STPWEN; + scsiseq = ahc_inb(ahc, SCSISEQ); + + if (ahc_reset(ahc) != 0) { + /* Failed */ ahc_free(ahc); return; } -#elif defined(__NetBSD__) || defined(__OpenBSD__) - ahc_construct(ahc, pa->pa_iot, ioh, ahc_t, ahc_f); + + if (ahc->features & AHC_ULTRA) + ultra_enb = bus_space_read_1(pa->pa_iot, ioh, SXFRCTL0) & + FAST20; + + if ((ahc->features & AHC_DT) != 0) { + u_int optionmode; + u_int sfunct; + + /* Perform ALT-Mode Setup */ + sfunct = ahc_inb(ahc, SFUNCT) & ~ALT_MODE; + ahc_outb(ahc, SFUNCT, sfunct | ALT_MODE); + optionmode = ahc_inb(ahc, OPTIONMODE); + printf("OptionMode = %x\n", optionmode); + ahc_outb(ahc, OPTIONMODE, OPTIONMODE_DEFAULTS); + /* Send CRC info in target mode every 4K */ + ahc_outb(ahc, TARGCRCCNT, 0); + ahc_outb(ahc, TARGCRCCNT + 1, 0x10); + ahc_outb(ahc, SFUNCT, sfunct); + + /* Normal mode setup */ + ahc_outb(ahc, CRCCONTROL1, CRCVALCHKEN|CRCENDCHKEN|CRCREQCHKEN + |TARGCRCENDEN|TARGCRCCNTEN); + } if (pci_intr_map(pa->pa_pc, pa->pa_intrtag, pa->pa_intrpin, pa->pa_intrline, &ih)) { - printf(": couldn't map interrupt\n"); + printf("%s: couldn't map interrupt\n", ahc->sc_dev.dv_xname); ahc_free(ahc); return; } intrstr = pci_intr_string(pa->pa_pc, ih); -#ifndef __OpenBSD__ - ahc->sc_ih = pci_intr_establish(pa->pa_pc, ih, IPL_BIO, ahc_intr, ahc); -#else ahc->sc_ih = pci_intr_establish(pa->pa_pc, ih, IPL_BIO, ahc_intr, ahc, - ahc->sc_dev.dv_xname); -#endif + ahc->sc_dev.dv_xname); + if (ahc->sc_ih == NULL) { printf(": couldn't establish interrupt"); if (intrstr != NULL) @@ -482,7 +460,7 @@ ahc_pci_attach(parent, self, aux) } if (intrstr != NULL) printf(": %s\n", intrstr); -#endif + /* * Protect ourself from spurrious interrupts during * intialization. @@ -490,115 +468,88 @@ ahc_pci_attach(parent, self, aux) opri = splbio(); /* - * Do aic7870/aic7880/aic7850 specific initialization + * Do aic7880/aic7870/aic7860/aic7850 specific initialization */ { - u_char sblkctl; - char *id_string; - - switch(ahc->type) { - case AHC_394U: - case AHC_294U: - case AHC_AIC7880: - { - id_string = "aic7880 "; - load_seeprom(ahc); - break; - } - case AHC_394: - case AHC_294: - case AHC_AIC7870: - { - id_string = "aic7870 "; - load_seeprom(ahc); - break; - } - case AHC_294AU: - case AHC_AIC7860: - { - id_string = "aic7860 "; - load_seeprom(ahc); - break; - } - case AHC_AIC7850: - { - id_string = "aic7850 "; + u_int8_t sblkctl; + u_int dscommand0; + + dscommand0 = ahc_inb(ahc, DSCOMMAND0); + dscommand0 |= MPARCKEN; + if ((ahc->features & AHC_ULTRA2) != 0) { + /* - * Use defaults, if the chip wasn't initialized by - * a BIOS. + * DPARCKEN doesn't work correctly on + * some MBs so don't use it. */ - ahc->flags |= AHC_USEDEFAULTS; - break; - } - default: - { - printf("ahc: Unknown controller type. Ignoring.\n"); - ahc_free(ahc); - splx(opri); - return; - } + dscommand0 &= ~(USCBSIZE32|DPARCKEN); + dscommand0 |= CACHETHEN; } + ahc_outb(ahc, DSCOMMAND0, dscommand0); + + /* See if we have an SEEPROM and perform auto-term */ + check_extport(ahc, &sxfrctl1); + /* * Take the LED out of diagnostic mode */ - sblkctl = AHC_INB(ahc, SBLKCTL); - AHC_OUTB(ahc, SBLKCTL, (sblkctl & ~(DIAGLEDEN|DIAGLEDON))); + sblkctl = ahc_inb(ahc, SBLKCTL); + ahc_outb(ahc, SBLKCTL, (sblkctl & ~(DIAGLEDEN|DIAGLEDON))); /* * I don't know where this is set in the SEEPROM or by the - * BIOS, so we default to 100%. + * BIOS, so we default to 100% on Ultra or slower controllers + * and 75% on ULTRA2 controllers. */ - AHC_OUTB(ahc, DSPCISTATUS, DFTHRSH_100); + if ((ahc->features & AHC_ULTRA2) != 0) { + ahc_outb(ahc, DFF_THRSH, RD_DFTHRSH_75|WR_DFTHRSH_75); + } else { + ahc_outb(ahc, DSPCISTATUS, DFTHRSH_100); + } - if(ahc->flags & AHC_USEDEFAULTS) { + if (ahc->flags & AHC_USEDEFAULTS) { /* * PCI Adapter default setup * Should only be used if the adapter does not have * an SEEPROM. */ /* See if someone else set us up already */ - u_long i; - for(i = TARG_SCRATCH; i < 0x60; i++) { - if(AHC_INB(ahc, i) != 0x00) - break; - } - if(i == TARG_SCRATCH) { - /* - * Try looking for all ones. You can get - * either. - */ - for (i = TARG_SCRATCH; i < 0x60; i++) { - if(AHC_INB(ahc, i) != 0xff) - break; - } - } - if((i != 0x60) && (our_id != 0)) { + if (scsiseq != 0) { printf("%s: Using left over BIOS settings\n", - ahc_name(ahc)); + ahc_name(ahc)); ahc->flags &= ~AHC_USEDEFAULTS; - } - else - our_id = 0x07; - AHC_OUTB(ahc, SCSICONF, - (our_id & 0x07)|ENSPCHK|RESET_SCSI); - /* In case we are a wide card */ - AHC_OUTB(ahc, SCSICONF + 1, our_id); - - if(!ultra_enb || (ahc->flags & AHC_USEDEFAULTS)) { + } else { /* - * If there wasn't a BIOS or the board - * wasn't in this mode to begin with, - * turn off ultra. + * Assume only one connector and always turn + * on termination. */ - ahc->type &= ~AHC_ULTRA; + our_id = 0x07; + sxfrctl1 = STPWEN; } - } + ahc_outb(ahc, SCSICONF, our_id|ENSPCHK|RESET_SCSI); - printf("%s: %s", ahc_name(ahc), id_string); + ahc->our_id = our_id; + } } - if(ahc_init(ahc)){ + /* + * Take a look to see if we have external SRAM. + * We currently do not attempt to use SRAM that is + * shared among multiple controllers. + */ + ahc_probe_ext_scbram(ahc); + + printf("%s: ", ahc_name(ahc)); + + /* + * Record our termination setting for the + * generic initialization routine. + */ + if ((sxfrctl1 & STPWEN) != 0) + ahc->flags |= AHC_TERM_ENB_A; + + if (ahc_init(ahc)) { ahc_free(ahc); splx(opri); return; /* XXX PCI code should take return status */ @@ -609,30 +560,181 @@ ahc_pci_attach(parent, self, aux) } /* - * Read the SEEPROM. Return 0 on failure + * Test for the presense of external sram in an + * "unshared" configuration. */ -void -load_seeprom(ahc) - struct ahc_data *ahc; +static int +ahc_ext_scbram_present(ahc) +struct ahc_softc *ahc; { - struct seeprom_descriptor sd; - struct seeprom_config sc; - u_short *scarray = (u_short *)≻ - u_short checksum = 0; - u_char scsi_conf; - u_char host_id; - int have_seeprom; - -#if defined(__FreeBSD__) - sd.sd_iobase = ahc->baseport + SEECTL; -#elif defined(__NetBSD__) || defined(__OpenBSD__) + int ramps; + int single_user; + pcireg_t devconfig; + struct ahc_pci_data *pd = ahc->pci_data; + + devconfig = pci_conf_read(pd->pc, pd->tag, DEVCONFIG); + single_user = (devconfig & MPORTMODE) != 0; + + if ((ahc->features & AHC_ULTRA2) != 0) + ramps = (ahc_inb(ahc, DSCOMMAND0) & RAMPS) != 0; + else if ((ahc->chip & AHC_CHIPID_MASK) >= AHC_AIC7870) + ramps = (devconfig & RAMPSM) != 0; + else + ramps = 0; + + if (ramps && single_user) + return (1); + return (0); +} + +/* + * Enable external scbram. + */ +static void +ahc_ext_scbram_config(ahc, enable, pcheck, fast) +struct ahc_softc *ahc; +int enable; +int pcheck; +int fast; +{ + pcireg_t devconfig; + struct ahc_pci_data *pd = ahc->pci_data; + + if (ahc->features & AHC_MULTI_FUNC) { + u_char channel; + /* + * Set the SCB Base addr (highest address bit) + * depending on which channel we are. + */ + channel = pd->function == 1 ? 1 : 0; + ahc_outb(ahc, SCBBADDR, channel); + } + + devconfig = pci_conf_read(pd->pc, pd->tag, DEVCONFIG); + + if ((ahc->features & AHC_ULTRA2) != 0) { + u_int dscommand0; + + dscommand0 = ahc_inb(ahc, DSCOMMAND0); + if (enable) + dscommand0 &= ~INTSCBRAMSEL; + else + dscommand0 |= INTSCBRAMSEL; + ahc_outb(ahc, DSCOMMAND0, dscommand0); + } else { + if (fast) + devconfig &= ~EXTSCBTIME; + else + devconfig |= EXTSCBTIME; + if (enable) + devconfig &= ~SCBRAMSEL; + else + devconfig |= SCBRAMSEL; + } + if (pcheck) + devconfig |= EXTSCBPEN; + else + devconfig &= ~EXTSCBPEN; + + pci_conf_write(pd->pc, pd->tag, DEVCONFIG, devconfig); +} + +/* + * Take a look to see if we have external SRAM. + * We currently do not attempt to use SRAM that is + * shared among multiple controllers. + */ +static void +ahc_probe_ext_scbram(ahc) +struct ahc_softc *ahc; +{ + int num_scbs; + int test_num_scbs; + int enable; + int pcheck; + int fast; + + if (ahc_ext_scbram_present(ahc) == 0) + return; + + /* + * Probe for the best parameters to use. + */ + enable = 0; + pcheck = 0; + fast = 0; + ahc_ext_scbram_config(ahc, /*enable*/1, pcheck, fast); + num_scbs = ahc_probe_scbs(ahc); + if (num_scbs == 0) { + /* The SRAM wasn't really present. */ + goto done; + } + enable = 1; + + /* Now see if we can do parity */ + ahc_ext_scbram_config(ahc, enable, /*pcheck*/1, fast); + num_scbs = ahc_probe_scbs(ahc); + if ((ahc_inb(ahc, INTSTAT) & BRKADRINT) == 0 + || (ahc_inb(ahc, ERROR) & MPARERR) == 0) + pcheck = 1; + + /* Clear any resulting parity error */ + ahc_outb(ahc, CLRINT, CLRPARERR); + ahc_outb(ahc, CLRINT, CLRBRKADRINT); + + /* Now see if we can do fast timing */ + ahc_ext_scbram_config(ahc, enable, pcheck, /*fast*/1); + test_num_scbs = ahc_probe_scbs(ahc); + if (test_num_scbs == num_scbs + && ((ahc_inb(ahc, INTSTAT) & BRKADRINT) == 0 + || (ahc_inb(ahc, ERROR) & MPARERR) == 0)) + fast = 1; + + done: + /* Clear any resulting parity error */ + ahc_outb(ahc, CLRINT, CLRPARERR); + ahc_outb(ahc, CLRINT, CLRBRKADRINT); + if (bootverbose && enable) { + printf("%s: External SRAM, %dns access%s\n", + ahc_name(ahc), fast ? 10 : 20, + pcheck ? ", parity checking enabled" : ""); + + } + ahc_ext_scbram_config(ahc, enable, pcheck, fast); +} + +/* + * Check the external port logic for a serial eeprom + * and termination/cable detection contrls. + */ +static void +check_extport(ahc, sxfrctl1) +struct ahc_softc *ahc; +u_int *sxfrctl1; +{ + struct seeprom_descriptor sd; + struct seeprom_config sc; + u_int scsi_conf; + u_int adapter_control; + int have_seeprom; + int have_autoterm; + sd.sd_tag = ahc->sc_iot; sd.sd_bsh = ahc->sc_ioh; - sd.sd_control_offset = SEECTL; - sd.sd_status_offset = SEECTL; - sd.sd_dataout_offset = SEECTL; -#endif - sd.sd_chip = C46; /* XXX - backwards compat */ + sd.sd_control_offset = SEECTL; + sd.sd_status_offset = SEECTL; + sd.sd_dataout_offset = SEECTL; + + /* + * For some multi-channel devices, the c46 is simply too + * small to work. For the other controller types, we can + * get our information from either SEEPROM type. Set the + * type to start our probe with accordingly. + */ + if (ahc->flags & AHC_LARGE_SEEPROM) + sd.sd_chip = C56_66; + else + sd.sd_chip = C46; sd.sd_MS = SEEMS; sd.sd_RDY = SEERDY; @@ -641,84 +743,549 @@ load_seeprom(ahc) sd.sd_DO = SEEDO; sd.sd_DI = SEEDI; - if(bootverbose) - printf("%s: Reading SEEPROM...", ahc_name(ahc)); - have_seeprom = acquire_seeprom(&sd); + have_seeprom = acquire_seeprom(ahc, &sd); if (have_seeprom) { - have_seeprom = read_seeprom(&sd, - (u_int16_t *)&sc, - ahc->flags & AHC_CHNLB, - sizeof(sc)/2); - release_seeprom(&sd); - if (have_seeprom) { - /* Check checksum */ - int i; - - for (i = 0;i < (sizeof(sc)/2 - 1);i = i + 1) - checksum = checksum + scarray[i]; - if (checksum != sc.checksum) { - if(bootverbose) - printf ("checksum error"); - have_seeprom = 0; + + if (bootverbose) + printf("%s: Reading SEEPROM...", ahc_name(ahc)); + + for (;;) { + bus_size_t start_addr; + + start_addr = 32 * (ahc->channel - 'A'); + + have_seeprom = read_seeprom(&sd, + (u_int16_t *)&sc, + start_addr, + sizeof(sc)/2); + + if (have_seeprom) { + /* Check checksum */ + int i; + int maxaddr; + u_int32_t checksum; + u_int16_t *scarray; + + maxaddr = (sizeof(sc)/2) - 1; + checksum = 0; + scarray = (u_int16_t *)≻ + + for (i = 0; i < maxaddr; i++) + checksum = checksum + scarray[i]; + if (checksum == 0 + || (checksum & 0xFFFF) != sc.checksum) { + if (bootverbose && sd.sd_chip == C56_66) + printf ("checksum error\n"); + have_seeprom = 0; + } else { + if (bootverbose) + printf("done.\n"); + break; + } } - else if(bootverbose) - printf("done.\n"); + + if (sd.sd_chip == C56_66) + break; + sd.sd_chip = C56_66; } } + if (!have_seeprom) { - if(bootverbose) - printf("\n%s: No SEEPROM availible\n", ahc_name(ahc)); + if (bootverbose) + printf("%s: No SEEPROM available.\n", ahc_name(ahc)); ahc->flags |= AHC_USEDEFAULTS; - } - else { + } else { /* * Put the data we've collected down into SRAM * where ahc_init will find it. */ int i; int max_targ = sc.max_targets & CFMAXTARG; + u_int16_t discenable; + u_int16_t ultraenb; - for(i = 0; i < max_targ; i++){ - u_char target_settings; - target_settings = (sc.device_flags[i] & CFXFER) << 4; - if (sc.device_flags[i] & CFSYNCH) - target_settings |= SOFS; - if (sc.device_flags[i] & CFWIDEB) - target_settings |= WIDEXFER; - if (sc.device_flags[i] & CFDISC) - ahc->discenable |= (0x01 << i); - AHC_OUTB(ahc, TARG_SCRATCH+i, target_settings); + discenable = 0; + ultraenb = 0; + if ((sc.adapter_control & CFULTRAEN) != 0) { + /* + * Determine if this adapter has a "newstyle" + * SEEPROM format. + */ + for (i = 0; i < max_targ; i++) { + if ((sc.device_flags[i] & CFSYNCHISULTRA) != 0) { + ahc->flags |= AHC_NEWEEPROM_FMT; + break; + } + } } - AHC_OUTB(ahc, DISC_DSB, ~(ahc->discenable & 0xff)); - AHC_OUTB(ahc, DISC_DSB + 1, ~((ahc->discenable >> 8) & 0xff)); - host_id = sc.brtime_id & CFSCSIID; + for (i = 0; i < max_targ; i++) { + u_int scsirate; + u_int16_t target_mask; + + target_mask = 0x01 << i; + if (sc.device_flags[i] & CFDISC) + discenable |= target_mask; + if ((ahc->flags & AHC_NEWEEPROM_FMT) != 0) { + if ((sc.device_flags[i] & CFSYNCHISULTRA) != 0) + ultraenb |= target_mask; + } else if ((sc.adapter_control & CFULTRAEN) != 0) { + ultraenb |= target_mask; + } + if ((sc.device_flags[i] & CFXFER) == 0x04 + && (ultraenb & target_mask) != 0) { + /* Treat 10MHz as a non-ultra speed */ + sc.device_flags[i] &= ~CFXFER; + ultraenb &= ~target_mask; + } + if ((ahc->features & AHC_ULTRA2) != 0) { + u_int offset; + + if (sc.device_flags[i] & CFSYNCH) + offset = MAX_OFFSET_ULTRA2; + else + offset = 0; + ahc_outb(ahc, TARG_OFFSET + i, offset); + + scsirate = (sc.device_flags[i] & CFXFER) + | ((ultraenb & target_mask) ? 0x8 : 0x0); + if (sc.device_flags[i] & CFWIDEB) + scsirate |= WIDEXFER; + } else { + scsirate = (sc.device_flags[i] & CFXFER) << 4; + if (sc.device_flags[i] & CFSYNCH) + scsirate |= SOFS; + if (sc.device_flags[i] & CFWIDEB) + scsirate |= WIDEXFER; + } + ahc_outb(ahc, TARG_SCSIRATE + i, scsirate); + } + ahc->our_id = sc.brtime_id & CFSCSIID; - scsi_conf = (host_id & 0x7); - if(sc.adapter_control & CFSPARITY) + scsi_conf = (ahc->our_id & 0x7); + if (sc.adapter_control & CFSPARITY) scsi_conf |= ENSPCHK; - if(sc.adapter_control & CFRESETB) + if (sc.adapter_control & CFRESETB) scsi_conf |= RESET_SCSI; - if(ahc->type & AHC_ULTRA) { + if (sc.bios_control & CFEXTEND) + ahc->flags |= AHC_EXTENDED_TRANS_A; + if (ahc->features & AHC_ULTRA + && (ahc->flags & AHC_NEWEEPROM_FMT) == 0) { /* Should we enable Ultra mode? */ - if(!(sc.adapter_control & CFULTRAEN)) + if (!(sc.adapter_control & CFULTRAEN)) /* Treat us as a non-ultra card */ - ahc->type &= ~AHC_ULTRA; + ultraenb = 0; + } + /* Set SCSICONF info */ + ahc_outb(ahc, SCSICONF, scsi_conf); + ahc_outb(ahc, DISC_DSB, ~(discenable & 0xff)); + ahc_outb(ahc, DISC_DSB + 1, ~((discenable >> 8) & 0xff)); + ahc_outb(ahc, ULTRA_ENB, ultraenb & 0xff); + ahc_outb(ahc, ULTRA_ENB + 1, (ultraenb >> 8) & 0xff); + } + + /* + * Cards that have the external logic necessary to talk to + * a SEEPROM, are almost certain to have the remaining logic + * necessary for auto-termination control. This assumption + * hasn't failed yet... + */ + have_autoterm = have_seeprom; + if (have_seeprom) + adapter_control = sc.adapter_control; + else + adapter_control = CFAUTOTERM; + + /* + * Some low-cost chips have SEEPROM and auto-term control built + * in, instead of using a GAL. They can tell us directly + * if the termination logic is enabled. + */ + if ((ahc->features & AHC_SPIOCAP) != 0) { + if ((ahc_inb(ahc, SPIOCAP) & SSPIOCPS) != 0) + have_autoterm = 1; + else + have_autoterm = 0; + } + + if (have_autoterm) + configure_termination(ahc, &sd, adapter_control, sxfrctl1); + + release_seeprom(&sd); +} + +static void +configure_termination(ahc, sd, adapter_control, sxfrctl1) +struct ahc_softc *ahc; +struct seeprom_descriptor *sd; +u_int adapter_control; +u_int *sxfrctl1; +{ + u_int8_t brddat; + + brddat = 0; + + /* + * Update the settings in sxfrctl1 to match the + * termination settings + */ + *sxfrctl1 = 0; + + /* + * SEECS must be on for the GALS to latch + * the data properly. Be sure to leave MS + * on or we will release the seeprom. + */ + SEEPROM_OUTB(sd, sd->sd_MS | sd->sd_CS); + if ((adapter_control & CFAUTOTERM) != 0 + || (ahc->features & AHC_NEW_TERMCTL) != 0) { + int internal50_present; + int internal68_present; + int externalcable_present; + int eeprom_present; + int enableSEC_low; + int enableSEC_high; + int enablePRI_low; + int enablePRI_high; + + enableSEC_low = 0; + enableSEC_high = 0; + enablePRI_low = 0; + enablePRI_high = 0; + if ((ahc->features & AHC_NEW_TERMCTL) != 0) { + ahc_new_term_detect(ahc, &enableSEC_low, + &enableSEC_high, + &enablePRI_low, + &enablePRI_high, + &eeprom_present); + if ((adapter_control & CFSEAUTOTERM) == 0) { + if (bootverbose) + printf("%s: Manual SE Termination\n", + ahc_name(ahc)); + enableSEC_low = (adapter_control & CFSTERM); + enableSEC_high = (adapter_control & CFWSTERM); + } + if ((adapter_control & CFAUTOTERM) == 0) { + if (bootverbose) + printf("%s: Manual LVD Termination\n", + ahc_name(ahc)); + enablePRI_low = enablePRI_high = + (adapter_control & CFLVDSTERM); + } + /* Make the table calculations below happy */ + internal50_present = 0; + internal68_present = 1; + externalcable_present = 1; + } else if ((ahc->features & AHC_SPIOCAP) != 0) { + aic785X_cable_detect(ahc, &internal50_present, + &externalcable_present, + &eeprom_present); + } else { + aic787X_cable_detect(ahc, &internal50_present, + &internal68_present, + &externalcable_present, + &eeprom_present); + } + + if ((ahc->features & AHC_WIDE) == 0) + internal68_present = 0; + + if (bootverbose) { + if ((ahc->features & AHC_ULTRA2) == 0) { + printf("%s: internal 50 cable %s present, " + "internal 68 cable %s present\n", + ahc_name(ahc), + internal50_present ? "is":"not", + internal68_present ? "is":"not"); + + printf("%s: external cable %s present\n", + ahc_name(ahc), + externalcable_present ? "is":"not"); + } + printf("%s: BIOS eeprom %s present\n", + ahc_name(ahc), eeprom_present ? "is" : "not"); + } + + if ((ahc->flags & AHC_INT50_SPEEDFLEX) != 0) { + /* + * The 50 pin connector is a separate bus, + * so force it to always be terminated. + * In the future, perform current sensing + * to determine if we are in the middle of + * a properly terminated bus. + */ + internal50_present = 0; + } + + /* + * Now set the termination based on what + * we found. + * Flash Enable = BRDDAT7 + * Secondary High Term Enable = BRDDAT6 + * Secondary Low Term Enable = BRDDAT5 (7890) + * Primary High Term Enable = BRDDAT4 (7890) + */ + if ((ahc->features & AHC_ULTRA2) == 0 + && (internal50_present != 0) + && (internal68_present != 0) + && (externalcable_present != 0)) { + printf("%s: Illegal cable configuration!!. " + "Only two connectors on the " + "adapter may be used at a " + "time!\n", ahc_name(ahc)); + } + + if ((ahc->features & AHC_WIDE) != 0 + && ((externalcable_present == 0) + || (internal68_present == 0) + || (enableSEC_high != 0))) { + brddat |= BRDDAT6; + if (bootverbose) { + if ((ahc->flags & AHC_INT50_SPEEDFLEX) != 0) + printf("%s: 68 pin termination " + "Enabled\n", ahc_name(ahc)); + else + printf("%s: %sHigh byte termination " + "Enabled\n", ahc_name(ahc), + enableSEC_high ? "Secondary " + : ""); + } } - /* Set the host ID */ - AHC_OUTB(ahc, SCSICONF, scsi_conf); - /* In case we are a wide card */ - AHC_OUTB(ahc, SCSICONF + 1, host_id); + + if (((internal50_present ? 1 : 0) + + (internal68_present ? 1 : 0) + + (externalcable_present ? 1 : 0)) <= 1 + || (enableSEC_low != 0)) { + if ((ahc->features & AHC_ULTRA2) != 0) + brddat |= BRDDAT5; + else + *sxfrctl1 |= STPWEN; + if (bootverbose) { + if ((ahc->flags & AHC_INT50_SPEEDFLEX) != 0) + printf("%s: 50 pin termination " + "Enabled\n", ahc_name(ahc)); + else + printf("%s: %sLow byte termination " + "Enabled\n", ahc_name(ahc), + enableSEC_low ? "Secondary " + : ""); + } + } + + if (enablePRI_low != 0) { + *sxfrctl1 |= STPWEN; + if (bootverbose) + printf("%s: Primary Low Byte termination " + "Enabled\n", ahc_name(ahc)); + } + + /* + * Setup STPWEN before setting up the rest of + * the termination per the tech note on the U160 cards. + */ + ahc_outb(ahc, SXFRCTL1, *sxfrctl1); + + if (enablePRI_high != 0) { + brddat |= BRDDAT4; + if (bootverbose) + printf("%s: Primary High Byte " + "termination Enabled\n", + ahc_name(ahc)); + } + + write_brdctl(ahc, brddat); + + } else { + if ((adapter_control & CFSTERM) != 0) { + *sxfrctl1 |= STPWEN; + + if (bootverbose) + printf("%s: %sLow byte termination Enabled\n", + ahc_name(ahc), + (ahc->features & AHC_ULTRA2) + ? "Primary " : ""); + } + + if ((adapter_control & CFWSTERM) != 0) { + brddat |= BRDDAT6; + if (bootverbose) + printf("%s: %sHigh byte termination Enabled\n", + ahc_name(ahc), + (ahc->features & AHC_ULTRA2) + ? "Secondary " : ""); + } + + /* + * Setup STPWEN before setting up the rest of + * the termination per the tech note on the U160 cards. + */ + ahc_outb(ahc, SXFRCTL1, *sxfrctl1); + + write_brdctl(ahc, brddat); + } + SEEPROM_OUTB(sd, sd->sd_MS); /* Clear CS */ +} + +static void +ahc_new_term_detect(ahc, enableSEC_low, enableSEC_high, enablePRI_low, + enablePRI_high, eeprom_present) +struct ahc_softc *ahc; +int *enableSEC_low; +int *enableSEC_high; +int *enablePRI_low; +int *enablePRI_high; +int *eeprom_present; +{ + u_int8_t brdctl; + + /* + * BRDDAT7 = Eeprom + * BRDDAT6 = Enable Secondary High Byte termination + * BRDDAT5 = Enable Secondary Low Byte termination + * BRDDAT4 = Enable Primary high byte termination + * BRDDAT3 = Enable Primary low byte termination + */ + brdctl = read_brdctl(ahc); + *eeprom_present = brdctl & BRDDAT7; + *enableSEC_high = (brdctl & BRDDAT6); + *enableSEC_low = (brdctl & BRDDAT5); + *enablePRI_high = (brdctl & BRDDAT4); + *enablePRI_low = (brdctl & BRDDAT3); +} + +static void +aic787X_cable_detect(ahc, internal50_present, internal68_present, + externalcable_present, eeprom_present) +struct ahc_softc *ahc; +int *internal50_present; +int *internal68_present; +int *externalcable_present; +int *eeprom_present; +{ + u_int8_t brdctl; + + /* + * First read the status of our cables. + * Set the rom bank to 0 since the + * bank setting serves as a multiplexor + * for the cable detection logic. + * BRDDAT5 controls the bank switch. + */ + write_brdctl(ahc, 0); + + /* + * Now read the state of the internal + * connectors. BRDDAT6 is INT50 and + * BRDDAT7 is INT68. + */ + brdctl = read_brdctl(ahc); + *internal50_present = !(brdctl & BRDDAT6); + *internal68_present = !(brdctl & BRDDAT7); + + /* + * Set the rom bank to 1 and determine + * the other signals. + */ + write_brdctl(ahc, BRDDAT5); + + /* + * Now read the state of the external + * connectors. BRDDAT6 is EXT68 and + * BRDDAT7 is EPROMPS. + */ + brdctl = read_brdctl(ahc); + *externalcable_present = !(brdctl & BRDDAT6); + *eeprom_present = brdctl & BRDDAT7; +} + +static void +aic785X_cable_detect(ahc, internal50_present, externalcable_present, + eeprom_present) +struct ahc_softc *ahc; +int *internal50_present; +int *externalcable_present; +int *eeprom_present; +{ + u_int8_t brdctl; + + ahc_outb(ahc, BRDCTL, BRDRW|BRDCS); + ahc_outb(ahc, BRDCTL, 0); + brdctl = ahc_inb(ahc, BRDCTL); + *internal50_present = !(brdctl & BRDDAT5); + *externalcable_present = !(brdctl & BRDDAT6); + + *eeprom_present = (ahc_inb(ahc, SPIOCAP) & EEPROM) != 0; +} + +static void +write_brdctl(ahc, value) +struct ahc_softc *ahc; +u_int8_t value; +{ + u_int8_t brdctl; + + if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7895) { + brdctl = BRDSTB; + if (ahc->channel == 'B') + brdctl |= BRDCS; + } else if ((ahc->features & AHC_ULTRA2) != 0) { + brdctl = 0; + } else { + brdctl = BRDSTB|BRDCS; + } + ahc_outb(ahc, BRDCTL, brdctl); + DELAY(20); + brdctl |= value; + ahc_outb(ahc, BRDCTL, brdctl); + DELAY(20); + if ((ahc->features & AHC_ULTRA2) != 0) + brdctl |= BRDSTB_ULTRA2; + else + brdctl &= ~BRDSTB; + ahc_outb(ahc, BRDCTL, brdctl); + DELAY(20); + if ((ahc->features & AHC_ULTRA2) != 0) + brdctl = 0; + else + brdctl &= ~BRDCS; + ahc_outb(ahc, BRDCTL, brdctl); +} + +static u_int8_t +read_brdctl(ahc) +struct ahc_softc *ahc; +{ + u_int8_t brdctl; + u_int8_t value; + + if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7895) { + brdctl = BRDRW; + if (ahc->channel == 'B') + brdctl |= BRDCS; + } else if ((ahc->features & AHC_ULTRA2) != 0) { + brdctl = BRDRW_ULTRA2; + } else { + brdctl = BRDRW|BRDCS; } + ahc_outb(ahc, BRDCTL, brdctl); + DELAY(20); + value = ahc_inb(ahc, BRDCTL); + ahc_outb(ahc, BRDCTL, 0); + return (value); } static int -acquire_seeprom(sd) - struct seeprom_descriptor *sd; +acquire_seeprom(ahc, sd) +struct ahc_softc *ahc; +struct seeprom_descriptor *sd; { int wait; + if ((ahc->features & AHC_SPIOCAP) != 0 + && (ahc_inb(ahc, SPIOCAP) & SEEPROM) == 0) + return (0); + /* * Request access of the memory port. When access is * granted, SEERDY will go high. We use a 1 second @@ -729,21 +1296,71 @@ acquire_seeprom(sd) SEEPROM_OUTB(sd, sd->sd_MS); wait = 1000; /* 1 second timeout in msec */ while (--wait && ((SEEPROM_STATUS_INB(sd) & sd->sd_RDY) == 0)) { - DELAY (1000); /* delay 1 msec */ - } + DELAY(1000); /* delay 1 msec */ + } if ((SEEPROM_STATUS_INB(sd) & sd->sd_RDY) == 0) { SEEPROM_OUTB(sd, 0); return (0); - } - return(1); + } + return (1); } static void release_seeprom(sd) - struct seeprom_descriptor *sd; +struct seeprom_descriptor *sd; { /* Release access to the memory port and the serial EEPROM. */ SEEPROM_OUTB(sd, 0); } -#endif /* NPCI > 0 */ +#define DPE PCI_STATUS_PARITY_DETECT +#define SSE PCI_STATUS_SPECIAL_ERROR +#define RMA PCI_STATUS_MASTER_ABORT +#define RTA PCI_STATUS_MASTER_TARGET_ABORT +#define STA PCI_STATUS_TARGET_TARGET_ABORT +#define DPR PCI_STATUS_PARITY_ERROR + +int +ahc_pci_intr(ahc) +struct ahc_softc *ahc; +{ + pcireg_t status1; + struct ahc_pci_data *pd = ahc->pci_data; + + if ((ahc_inb(ahc, ERROR) & PCIERRSTAT) == 0) + return 0; + + status1 = pci_conf_read(pd->pc, pd->tag, PCI_COMMAND_STATUS_REG); + + if (status1 & DPE) { + printf("%s: Data Parity Error Detected during address " + "or write data phase\n", ahc_name(ahc)); + } + if (status1 & SSE) { + printf("%s: Signal System Error Detected\n", ahc_name(ahc)); + } + if (status1 & RMA) { + printf("%s: Received a Master Abort\n", ahc_name(ahc)); + } + if (status1 & RTA) { + printf("%s: Received a Target Abort\n", ahc_name(ahc)); + } + if (status1 & STA) { + printf("%s: Signaled a Target Abort\n", ahc_name(ahc)); + } + if (status1 & DPR) { + printf("%s: Data Parity Error has been reported via PERR#\n", + ahc_name(ahc)); + } + if ((status1 & (DPE|SSE|RMA|RTA|STA|DPR)) == 0) { + printf("%s: Latched PCIERR interrupt with " + "no status bits set\n", ahc_name(ahc)); + } + pci_conf_write(pd->pc, pd->tag, PCI_COMMAND_STATUS_REG, status1); + + if (status1 & (DPR|RMA|RTA)) { + ahc_outb(ahc, CLRINT, CLRPARERR); + } + + return 1; +}