From: rahnds Date: Mon, 3 Mar 1997 16:31:08 +0000 (+0000) Subject: cleanup of powerpc miniroot/ramdisk installation, scrap floppy installation X-Git-Url: http://artulab.com/gitweb/?a=commitdiff_plain;h=5c9c7433693a369f977cf31796b9fc9e1a2e523f;p=openbsd cleanup of powerpc miniroot/ramdisk installation, scrap floppy installation since ramdisk installation works much better. --- diff --git a/distrib/powerpc/inst/Makefile b/distrib/powerpc/inst/Makefile deleted file mode 100644 index 2e19d860c8a..00000000000 --- a/distrib/powerpc/inst/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# $NetBSD: Makefile,v 1.1 1995/07/18 04:13:06 briggs Exp $ - -TOP= ${.CURDIR}/.. - -.include "${TOP}/Makefile.inc" -IMAGE= inst-${REV}.fs - -.include "${TOP}/inst-common/Makefile.inc" diff --git a/distrib/powerpc/inst/disktab.preinstall b/distrib/powerpc/inst/disktab.preinstall deleted file mode 100644 index 81a0bb0a052..00000000000 --- a/distrib/powerpc/inst/disktab.preinstall +++ /dev/null @@ -1,32 +0,0 @@ -# -# $NetBSD: disktab.preinstall,v 1.1 1995/07/18 04:13:07 briggs Exp $ -# -# Disk geometry and partition layout tables. -# Key: -# dt controller type -# ty type of disk (fixed, removeable, simulated) -# d[0-4] drive-type-dependent parameters -# ns #sectors/track -# nt #tracks/cylinder -# nc #cylinders/disk -# sc #sectors/cylinder, nc*nt default -# su #sectors/unit, sc*nc default -# se sector size, DEV_BSIZE default -# rm rpm, 3600 default -# sf supports bad144-style bad sector forwarding -# sk sector skew per track, default 0 -# cs sector skew per cylinder, default 0 -# hs headswitch time, default 0 -# ts one-cylinder seek time, default 0 -# il sector interleave (n:1), 1 default -# bs boot block size, default BBSIZE -# sb superblock size, default SBSIZE -# o[a-h] partition offsets in sectors -# p[a-h] partition sizes in sectors -# b[a-h] partition block sizes in bytes -# f[a-h] partition fragment sizes in bytes -# t[a-h] partition types (filesystem, swap, etc) -# -# All partition sizes reserve space for bad sector tables. -# (5 cylinders needed for maintenance + replacement sectors) -# diff --git a/distrib/powerpc/inst/dot.instutils b/distrib/powerpc/inst/dot.instutils deleted file mode 100644 index 94a55659fe5..00000000000 --- a/distrib/powerpc/inst/dot.instutils +++ /dev/null @@ -1,156 +0,0 @@ -# -# $NetBSD: dot.instutils,v 1.1 1995/07/18 04:13:08 briggs Exp $ -# -# Copyright (c) 1994 Christopher G. Demetriou -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. All advertising materials mentioning features or use of this software -# must display the following acknowledgement: -# This product includes software developed by Christopher G. Demetriou. -# 4. The name of the author may not be used to endorse or promote products -# derived from this software without specific prior written permission -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# - -# Installation configuration utilites (functions), to get NetBSD configured -# reasonably once it is installed on the hard disk. These are meant to be -# invoked from the shell prompt, by people installing NetBSD. - -Configure() -{ - DEV=/mnt/dev - ETC=/mnt/etc - - echo "You will now be prompted for information about this" - echo "machine. If you hit return, the default answer (in" - echo "brackets) will be used." - - echo "" - echo -n "What is this machine's hostname? [unknown.host.domain] " - read hname - if [ "$hname" = "" ]; then - hname=unknown.host.domain - fi - echo $hname > ${ETC}/myname - proto_domain=`echo $hname | sed -e 's/[^.]*\.//'` - - echo "" - echo "What domain is this machine in (this is NOT its YP" - echo -n "domain name)? [$proto_domain] " - read dname - if [ "$dname" = "" ]; then - dname=$proto_domain - fi - - echo "" - if [ -e ${ETC}/sendmail.cf ]; then - echo "WARNING: A default sendmail.cf exists, and probably" - echo "needs to be tuned and/or replaced, to work properly at" - echo "your site!" - else - echo "WARNING: No default sendmail.cf installed. Did you" - echo "forget to install the 'etc' distribution?" - fi - - echo "127.0.0.1 localhost localhost.$dname" > ${ETC}/hosts - - echo "" - echo -n "Does this machine have an ethernet interface? [y] " - read resp - case "$resp" in - n*) - ;; - *) - intf= - while [ "$intf" = "" ]; do - echo -n "What is the primary interface name " - echo -n "(e.g. ae0, etc)? " - read intf - done - echo -n "What is the hostname for this interface? [$hname] " - read ifname - if [ "$ifname" = "" ]; then - ifname=$hname - fi - ifaddr= - while [ "$ifaddr" = "" ]; do - echo -n "What is the IP address associated with " - echo -n "interface ${intf}? " - read ifaddr - done - echo "$ifaddr $ifname `echo $ifname | sed -e s/\.$dname//`" \ - >> ${ETC}/hosts - - echo -n "Does this interface have a special netmask? [n] " - read resp - case "$resp" in - y*) - echo -n "What is the netmask? [0xffffff00] " - read ifnetmask - if [ "$ifnetmask" = "" ]; then - ifnetmask=0xffffff00 - fi - ;; - *) - ifnetmask= - ;; - esac - - echo -n "Does this interface need additional flags? [n] " - read resp - case "$resp" in - y*) - echo -n "What flags? [link0] " - read ifflags - if [ "$ifflags" = "" ]; then - ifflags=link0 - fi - ;; - *) - ifflags= - ;; - esac - echo "inet $ifname $ifnetmask $ifflags" > ${ETC}/hostname.$intf - - echo "" - echo -n "WARNING: if you have any more ethernet interfaces, " - echo "you will have to configure" - echo -n "them by hand. Read the comments in /etc/netstart to" - echo "learn how to do this." - ;; - esac - - echo "" - echo -n "Making device nodes..." - cd ${DEV} - sh MAKEDEV all - echo " done." - - sync - - echo "You may now reboot your machine with the shutdown command." - echo " shutdown -r now" - echo "to reboot or" - echo " shutdown -h now" - echo "to halt." - echo "Remember to erase the miniroot name from the booter's" - echo "booting preferences dialog box before booting again." -} diff --git a/distrib/powerpc/inst/dot.profile b/distrib/powerpc/inst/dot.profile deleted file mode 100644 index 603cd70ea87..00000000000 --- a/distrib/powerpc/inst/dot.profile +++ /dev/null @@ -1,49 +0,0 @@ -# -# $NetBSD: dot.profile,v 1.1 1995/07/18 04:13:09 briggs Exp $ -# -# Copyright (c) 1994 Christopher G. Demetriou -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. All advertising materials mentioning features or use of this software -# must display the following acknowledgement: -# This product includes software developed by Christopher G. Demetriou. -# 4. The name of the author may not be used to endorse or promote products -# derived from this software without specific prior written permission -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# - -PATH=/sbin:/bin:/usr/bin:/usr/sbin:/ -export PATH -TERM=vt200 -export TERM - -# set up some sane defaults -echo 'erase ^?, werase ^H, kill ^U, intr ^C' -stty newcrt werase ^H intr ^C kill ^U erase ^? 9600 -echo '' - -# pull in the function definitions that people will use from the shell prompt. -. /.commonutils -. /.instutils - -# run the installation script. -umask 022 -install diff --git a/distrib/powerpc/inst/install.sh b/distrib/powerpc/inst/install.sh deleted file mode 100644 index 1eec1d88717..00000000000 --- a/distrib/powerpc/inst/install.sh +++ /dev/null @@ -1,269 +0,0 @@ -#!/bin/sh -# -# $NetBSD: install.sh,v 1.1 1995/07/18 04:13:10 briggs Exp $ -# -# Copyright (c) 1994 Christopher G. Demetriou -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. All advertising materials mentioning features or use of this software -# must display the following acknowledgement: -# This product includes software developed by Christopher G. Demetriou. -# 4. The name of the author may not be used to endorse or promote products -# derived from this software without specific prior written permission -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# - -# NetBSD installation script. -# In a perfect world, this would be a nice C program, with a reasonable -# user interface. - -FSTABDIR=/mnt/etc # /mnt/etc -#DONTDOIT=echo - -VERSION=1.0 -FSTAB=${FSTABDIR}/fstab - -getresp() { - read resp - if [ "X$resp" = "X" ]; then - resp=$1 - fi -} - -getvar() { - echo $(eval $(echo "echo \$$1")) -} - -shiftvar() { - local - var - var="$1" - list="$(getvar $var)" - set -- $list - shift - setvar $var "$*" -} - -getparts() { - disklabel $1 2>/dev/null | sed -e '/^[ ][ ][ad-p]/!d' | - sed -e 's,^[ ]*\([a-p]\):[ ]*[0-9]*[ ]*[0-9]*[ ][ ]*\([a-zA-Z0-9.]*\).*,\1 \2,' | - sed -e ':a - N;${s/\n/ /g;p;d;} - ba' -} - -getdrives() { - local du thispart - for du in /dev/r${drivetype}?a; do - dd if=$du of=/dev/null bs=1b count=1 >/dev/null 2>&1 - if [ $? -eq 0 ]; then - thisunit=`echo $du | sed -e 's,/dev/r\(...\)a,\1,g'` - driveunits="$driveunits $thisunit" - else - continue; - fi - setvar $thisunit "$(getparts $thisunit)" - export $thisunit - done - export drivenunits -} - -prepdrive() { - echo "which drive would you like to prepare next?" - echo "choices are: ${driveunits}" - echo "" - getresp - case $resp in - *) ;; - esac -} - -echo "Welcome to the NetBSD ${VERSION} installation program." -echo "" -echo "This program is designed to help you put NetBSD on your hard disk," -echo "in a simple and rational way. Its main objective is to format," -echo "mount and create an fstab for your root (/) and user (/usr)" -echo "partitions." -echo "" -echo "As with anything which modifies your hard drive's contents, this" -echo "program can cause SIGNIFICANT data loss, and you are advised" -echo "to make sure your hard drive is backed up before beginning the" -echo "installation process." -echo "" -echo "Default answers are displyed in brackets after the questions." -echo "You can hit Control-C at any time to quit, but if you do so at a" -echo "prompt, you may have to hit return. Also, quitting in the middle of" -echo "installation may leave your system in an inconsistent state." -echo "" -echo -n "Proceed with installation? [n] " -getresp "n" -case "$resp" in - y*|Y*) - echo "scanning for the root device" - ;; - *) - echo "" - echo "OK, then. Enter 'halt' at the prompt to halt the" - echo "machine or 'reboot' to reboot it." - exit - ;; -esac - -drivetype=sd -sect_fwd="" - -# find out what units are possible for that disk, and query the user. -getdrives -for du in $driveunits; do - set -- $(getvar $du) - if [ $# -ge 2 -a "$1" = "a" -a "`echo $2 | sed -e 's,.*BSD.*,BSD,'`" = "BSD" ]; then - rdev=$du - fi -done - -echo "" -echo "The root device you have chosen is on: ${rdev}" -echo "" -# driveunits=`ls /dev/${drivetype}?a | sed -e 's,/dev/\(...\)a,\1,g'` -if [ "X${driveunits}" = "X" ]; then - echo "FATAL ERROR:" - echo "No devices for disks of type '${drivetype}'." - echo "This is probably a bug in the install disks." - echo "Exiting install program." - exit -fi - -echo "" -echo "THIS IS YOUR LAST CHANCE!!!" -echo "" -echo "(answering yes will format your root partition on $rdev)" -echo -n "Are you SURE you want NetBSD installed on your hard drive? (yes/no) " -answer="" -while [ "$answer" = "" ]; do - getresp - case $resp in - yes|YES) - echo "" - answer=yes - ;; - no|NO) - echo "" - echo -n "OK, then. enter 'halt' to halt the machine. " - exit - ;; - *) - echo -n "Please answer 'yes' or 'no'." - ;; - esac -done -echo "Initializing / (root) filesystem, and mounting..." -$DONTDOIT newfs /dev/r${rdev}a $name -$DONTDOIT mount -v /dev/${rdev}a /mnt -echo "" -echo -n "Creating a fstab..." -mkdir -p $FSTABDIR -echo "/dev/${rdev}a / ufs rw 1 1" > $FSTAB - -# get rid of this partition -shiftvar $rdev -shiftvar $rdev - -echo "" -echo "Now lets setup your /usr file system" -echo "(Once a valid input for drive and partition is seen" -echo "it will be FORMATTED and inserted in the fstab.)" -while [ "X$usrpart" = "X" ]; do - resp="" - drivename="" - while [ "X$resp" = "X" ]; do - echo "choices: $driveunits" - echo "which drive do you want /usr on?" - getresp - set -- $driveunits - while [ $# -gt 0 ]; do - if [ "X$resp" = "X$1" ]; then - drivename=$1 - break; - else - shift - fi - done - if [ "X$drivename" != "X" ]; then - break - fi - done - - usrpart="" - echo "You have selected $drivename" - echo "here is a list of partitions on $drivename" - disklabel $drivename 2>/dev/null | sed -e '/^[ ][ ][ad-p]:/p;/^#[ \t]*size/p;d' - echo "which partition would you like to format and have" - echo -n "mounted as /usr? (supply the letter): " - getresp - if [ "X$resp" = "X" ]; then - continue; - fi - - list=$(getvar $drivename) - set -- $list - while [ $# -gt 0 ]; do - if [ "$resp" = "$1" ]; then - if [ "`echo $2 | sed -e 's,.*BSD.*,BSD,'`" != "BSD" ]; then - echo "" - echo -n "$drivename$resp is of type $2 which is not" - echo " a BSD filesystem type" - break - fi - usrpart=$drivename$resp - break - else - shift - shift - fi - done - if [ "X$usrpart" = "X" ]; then - echo "$resp is not a valid input." - echo "" - fi -done - -echo "" -echo "Initializing /usr filesystem, and mounting..." -$DONTDOIT newfs /dev/r${usrpart} $name -$DONTDOIT mkdir -p /mnt/usr -$DONTDOIT mount -v /dev/${usrpart} /mnt/usr -echo "" -echo -n "Adding to fstab..." -echo "/dev/${usrpart} /usr ufs rw 1 2" >> $FSTAB -sync -echo " done." - -echo "" -echo "" -echo "OK! The preliminary work of setting up your disk is now complete," -echo "and you can install the actual NetBSD software." -echo "" -echo "Right now, your root is mounted on /mnt and your usr on /mnt/usr." -echo "You should consult the installation notes to determine how to load" -echo "and install the NetBSD distribution sets, and how to configure your" -echo "system when you are done." -echo "" -echo "GOOD LUCK!" -echo "" diff --git a/distrib/powerpc/inst/list b/distrib/powerpc/inst/list deleted file mode 100644 index c5cf8207ae7..00000000000 --- a/distrib/powerpc/inst/list +++ /dev/null @@ -1,10 +0,0 @@ -# $NetBSD: list,v 1.1 1995/07/18 04:13:12 briggs Exp $ - -# the disktab explanation file -COPY disktab.preinstall etc - -# and the installation tools -COPY dot.profile .profile -COPY dot.instutils .instutils -COPY install.sh install -SPECIAL chmod 755 install diff --git a/distrib/powerpc/kc-common/Makefile.inc b/distrib/powerpc/kc-common/Makefile.inc deleted file mode 100644 index b2acf64471a..00000000000 --- a/distrib/powerpc/kc-common/Makefile.inc +++ /dev/null @@ -1,38 +0,0 @@ -# -# $NetBSD: Makefile.inc,v 1.1 1995/07/18 04:13:14 briggs Exp $ -# - -# TOP is assumed to be defined by Makefile including this one. - -CBIN= raminst -COMMONDIR= ${TOP}/kc-common - -MOUNT_POINT?= ${TOP}/kc/fs - -LISTS= ${COMMONDIR}/list ${.CURDIR}/list -CRUNCHCONF= ${COMMONDIR}/${CBIN}.conf -MTREE= ${COMMONDIR}/mtree.conf - -all: ${CBIN} - mkdir -p ${MOUNT_POINT} - mtree -def ${MTREE} -p ${MOUNT_POINT}/ -u - TOPDIR=${TOP} CURDIR=${.CURDIR} OBJDIR=${.OBJDIR} \ - TARGDIR=${MOUNT_POINT} sh ${TOP}/runlist.sh ${LISTS} - mkcdfs ${IMAGE} ${MOUNT_POINT} - -unconfig: - -/bin/rm -f ${IMAGE} - -/bin/rm -rf ${MOUNT_POINT} - -${CBIN}.mk ${CBIN}.cache ${CBIN}.c: ${CRUNCHCONF} - crunchgen -E -D ${BSDSRCDIR} -L ${DESTDIR}/usr/lib ${CRUNCHCONF} - -${CBIN}: ${CBIN}.mk ${CBIN}.cache ${CBIN}.c - make -f ${CBIN}.mk all - -clean cleandir: - /bin/rm -f core ${IMAGE} ${CBIN} ${CBIN}.mk ${CBIN}.cache *.o *.lo *.c - /bin/rm -rf ${MOUNT_POINT} - -.include -.include diff --git a/distrib/powerpc/kc-common/list b/distrib/powerpc/kc-common/list deleted file mode 100644 index 233e4f3e230..00000000000 --- a/distrib/powerpc/kc-common/list +++ /dev/null @@ -1,30 +0,0 @@ -# -# $NetBSD: list,v 1.2 1995/08/13 13:21:07 briggs Exp $ -# - -# copy the crunched binary, link to it, and kill it -COPY ${OBJDIR}/raminst raminst -LINK raminst bin/cat -LINK raminst bin/cp -LINK raminst bin/pwd -LINK raminst bin/sh -LINK bin/sh bin/-sh -LINK raminst bin/stty -LINK raminst bin/sync -LINK raminst bin/test -LINK raminst bin/[ -LINK raminst sbin/init -LINK raminst sbin/mount -LINK raminst sbin/mount_ffs -LINK raminst sbin/reboot -LINK raminst sbin/umount -SPECIAL /bin/rm raminst - -# copy the MAKEDEV script and make some devices -COPY ${DESTDIR}/dev/MAKEDEV dev/MAKEDEV -SPECIAL cd dev; sh MAKEDEV raminst -SPECIAL /bin/rm dev/MAKEDEV - -# various files that we need in /etc for the install - -# and the common installation tools diff --git a/distrib/powerpc/kc-common/mtree.conf b/distrib/powerpc/kc-common/mtree.conf deleted file mode 100644 index b348b9773a3..00000000000 --- a/distrib/powerpc/kc-common/mtree.conf +++ /dev/null @@ -1,74 +0,0 @@ -# -# $NetBSD: mtree.conf,v 1.1 1995/07/18 04:13:24 briggs Exp $ -# - -/set type=dir uname=root gname=wheel mode=0755 -# . -. - -# ./bin -bin -# ./bin -.. - -# ./dev -dev -# ./dev -.. - -# ./etc -etc -# ./etc -.. - -# ./mnt -mnt -# ./mnt -.. - -# ./mnt2 -mnt2 -# ./mnt2 -.. - -# ./sbin -sbin -# ./sbin -.. - -# ./tmp -tmp -# ./tmp -.. - -# ./usr -usr - -# ./usr/bin -bin -# ./usr/bin -.. - -# ./usr/mdec -mdec -# ./usr/mdec -.. - -# ./usr/sbin -sbin -# ./usr/sbin -.. - -# ./usr/share -share - -# ./usr/share/misc -misc -# ./usr/share/misc -.. - -# ./usr/share -.. - -# ./usr -.. diff --git a/distrib/powerpc/kc-common/raminst.conf b/distrib/powerpc/kc-common/raminst.conf deleted file mode 100644 index 4409e485e31..00000000000 --- a/distrib/powerpc/kc-common/raminst.conf +++ /dev/null @@ -1,19 +0,0 @@ -# -# $NetBSD: raminst.conf,v 1.3 1995/09/30 20:00:47 briggs Exp $ -# -# ram.conf - unified binary for the RAM disk -# - -srcdirs bin sbin usr.bin usr.sbin -srcdirs gnu/usr.bin - -progs cat cp pwd -progs sh stty sync test init -progs mount mount_ffs reboot -progs umount - -ln sh -sh # init invokes the shell this way -ln test [ -ln mount_ffs ffs - -libs -ledit -lutil -ltermcap -lcompat -ll -lm -lz diff --git a/distrib/powerpc/kc-common/termcap.vt b/distrib/powerpc/kc-common/termcap.vt deleted file mode 100644 index d0c58f1022b..00000000000 --- a/distrib/powerpc/kc-common/termcap.vt +++ /dev/null @@ -1,67 +0,0 @@ -# -# $NetBSD: termcap.vt,v 1.1 1995/07/18 04:13:31 briggs Exp $ -# -# Copyright (c) 1980, 1985, 1989 The Regents of the University of California. -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. All advertising materials mentioning features or use of this software -# must display the following acknowledgement: -# This product includes software developed by the University of -# California, Berkeley and its contributors. -# 4. Neither the name of the University nor the names of its contributors -# may be used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND -# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -# ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE -# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -# SUCH DAMAGE. -# -# @(#)termcap.src 5.109 (Berkeley) 3/8/93 -# -vt200|vt220|dec-vt220|vt200-js|vt220-js|dec vt200 series with jump scroll:\ - :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:\ - :RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:ct=\E[3g:dc=\E[P:dl=\E[M:\ - :ei=\E[4l:im=\E[4h:k1=\E[17~:k2=\E[18~:k3=\E[19~:k4=\E[20~:\ - :k5=\E[21~:k6=\E[23~:k7=\E[24~:k8=\E[25~:kD=\E[3~:kH=\E[4~:\ - :kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kh=\E[1~:km:mi:ms:\ - :if=/usr/share/tabset/vt100:se=\E[27m:st=\EH:ue=\E[24m:\ - :tc=vt100: -vt100|dec-vt100|vt100-am|vt100am|dec vt100:\ - :bl=^G:cr=^M:it#8:\ - :do=^J:co#80:li#24:cl=50\E[;H\E[2J:sf=2*\ED:\ - :le=^H:bs:am:cm=5\E[%i%d;%dH:nd=2\E[C:up=2\E[A:cb=3\E[1K:\ - :ce=3\E[K:cd=50\E[J:so=2\E[7m:se=2\E[m:us=2\E[4m:ue=2\E[m:\ - :md=2\E[1m:mr=2\E[7m:mb=2\E[5m:me=2\E[m:is=\E[1;24r\E[24;1H:\ - :if=/usr/share/tabset/vt100:\ - :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:ks=\E[?1h\E=:ke=\E[?1l\E>:\ - :ku=\EOA:kd=\EOB:kr=\EOC:kl=\EOD:kb=^H:\ - :ho=\E[H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:pt:sr=2*\EM:vt#3:xn:\ - :sc=\E7:rc=\E8:cs=\E[%i%d;%dr: -vt300|vt320|vt300-80|VT 300 with 80 columns, on VMS:\ - :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\ - :LE=\E[%dD:RI=\E[%dC:SR=1*\E[%dM:UP=\E[%dA:al=\E[L:\ - :am:bl=^G:bs:cd=2*\E[J:ce=2*\E[K:cl=45\E[H\E[2J:\ - :cm=%i\E[%d;%dH:co#80:cr=\r:cs=\E[%i%d;%dr:ct=\E[3g:\ - :dc=\E[P:dl=\E[M:dm=:do=\ED:ec=\E[%dX:ed=:ei=\E[4l:\ - :ho=\E[H:ic:im=\E[4h:it#8:k1=\EOP:k2=\EOQ:k3=\EOR:\ - :k4=\EOS:kd=\E[B:ke=\E[?1l\E>:kl=\E[D:kn#4:kr=\E[C:ks=\E[?1h\E=:\ - :ku=\E[A:le=^H:li#24:mb=\E[5m:md=\E[1m:me=\E[0m:mi:\ - :mr=\E[7m:ms:nd=\E[C:nl=\ED:nw=\EE:pf=\E[?4i:po=\E[?5i:\ - :ps=\E[i:rc=\E8:sc=\E7:se=\E[27m:sf=1*\ED:so=\E[7m:\ - :sr=1*\EM:st=\EH:ue=\E[24m:up=\EM:us=\E[4m:xn: diff --git a/distrib/powerpc/kc/Makefile b/distrib/powerpc/kc/Makefile deleted file mode 100644 index e858bd10388..00000000000 --- a/distrib/powerpc/kc/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# $NetBSD: Makefile,v 1.1 1995/07/18 04:13:06 briggs Exp $ - -TOP= ${.CURDIR}/.. - -.include "${TOP}/Makefile.inc" -IMAGE= kc-${REV}.fs - -.include "${TOP}/kc-common/Makefile.inc" diff --git a/distrib/powerpc/kc/dot.instutils b/distrib/powerpc/kc/dot.instutils deleted file mode 100644 index 94a55659fe5..00000000000 --- a/distrib/powerpc/kc/dot.instutils +++ /dev/null @@ -1,156 +0,0 @@ -# -# $NetBSD: dot.instutils,v 1.1 1995/07/18 04:13:08 briggs Exp $ -# -# Copyright (c) 1994 Christopher G. Demetriou -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. All advertising materials mentioning features or use of this software -# must display the following acknowledgement: -# This product includes software developed by Christopher G. Demetriou. -# 4. The name of the author may not be used to endorse or promote products -# derived from this software without specific prior written permission -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# - -# Installation configuration utilites (functions), to get NetBSD configured -# reasonably once it is installed on the hard disk. These are meant to be -# invoked from the shell prompt, by people installing NetBSD. - -Configure() -{ - DEV=/mnt/dev - ETC=/mnt/etc - - echo "You will now be prompted for information about this" - echo "machine. If you hit return, the default answer (in" - echo "brackets) will be used." - - echo "" - echo -n "What is this machine's hostname? [unknown.host.domain] " - read hname - if [ "$hname" = "" ]; then - hname=unknown.host.domain - fi - echo $hname > ${ETC}/myname - proto_domain=`echo $hname | sed -e 's/[^.]*\.//'` - - echo "" - echo "What domain is this machine in (this is NOT its YP" - echo -n "domain name)? [$proto_domain] " - read dname - if [ "$dname" = "" ]; then - dname=$proto_domain - fi - - echo "" - if [ -e ${ETC}/sendmail.cf ]; then - echo "WARNING: A default sendmail.cf exists, and probably" - echo "needs to be tuned and/or replaced, to work properly at" - echo "your site!" - else - echo "WARNING: No default sendmail.cf installed. Did you" - echo "forget to install the 'etc' distribution?" - fi - - echo "127.0.0.1 localhost localhost.$dname" > ${ETC}/hosts - - echo "" - echo -n "Does this machine have an ethernet interface? [y] " - read resp - case "$resp" in - n*) - ;; - *) - intf= - while [ "$intf" = "" ]; do - echo -n "What is the primary interface name " - echo -n "(e.g. ae0, etc)? " - read intf - done - echo -n "What is the hostname for this interface? [$hname] " - read ifname - if [ "$ifname" = "" ]; then - ifname=$hname - fi - ifaddr= - while [ "$ifaddr" = "" ]; do - echo -n "What is the IP address associated with " - echo -n "interface ${intf}? " - read ifaddr - done - echo "$ifaddr $ifname `echo $ifname | sed -e s/\.$dname//`" \ - >> ${ETC}/hosts - - echo -n "Does this interface have a special netmask? [n] " - read resp - case "$resp" in - y*) - echo -n "What is the netmask? [0xffffff00] " - read ifnetmask - if [ "$ifnetmask" = "" ]; then - ifnetmask=0xffffff00 - fi - ;; - *) - ifnetmask= - ;; - esac - - echo -n "Does this interface need additional flags? [n] " - read resp - case "$resp" in - y*) - echo -n "What flags? [link0] " - read ifflags - if [ "$ifflags" = "" ]; then - ifflags=link0 - fi - ;; - *) - ifflags= - ;; - esac - echo "inet $ifname $ifnetmask $ifflags" > ${ETC}/hostname.$intf - - echo "" - echo -n "WARNING: if you have any more ethernet interfaces, " - echo "you will have to configure" - echo -n "them by hand. Read the comments in /etc/netstart to" - echo "learn how to do this." - ;; - esac - - echo "" - echo -n "Making device nodes..." - cd ${DEV} - sh MAKEDEV all - echo " done." - - sync - - echo "You may now reboot your machine with the shutdown command." - echo " shutdown -r now" - echo "to reboot or" - echo " shutdown -h now" - echo "to halt." - echo "Remember to erase the miniroot name from the booter's" - echo "booting preferences dialog box before booting again." -} diff --git a/distrib/powerpc/kc/dot.profile b/distrib/powerpc/kc/dot.profile deleted file mode 100644 index 603cd70ea87..00000000000 --- a/distrib/powerpc/kc/dot.profile +++ /dev/null @@ -1,49 +0,0 @@ -# -# $NetBSD: dot.profile,v 1.1 1995/07/18 04:13:09 briggs Exp $ -# -# Copyright (c) 1994 Christopher G. Demetriou -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. All advertising materials mentioning features or use of this software -# must display the following acknowledgement: -# This product includes software developed by Christopher G. Demetriou. -# 4. The name of the author may not be used to endorse or promote products -# derived from this software without specific prior written permission -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# - -PATH=/sbin:/bin:/usr/bin:/usr/sbin:/ -export PATH -TERM=vt200 -export TERM - -# set up some sane defaults -echo 'erase ^?, werase ^H, kill ^U, intr ^C' -stty newcrt werase ^H intr ^C kill ^U erase ^? 9600 -echo '' - -# pull in the function definitions that people will use from the shell prompt. -. /.commonutils -. /.instutils - -# run the installation script. -umask 022 -install diff --git a/distrib/powerpc/kc/install.sh b/distrib/powerpc/kc/install.sh deleted file mode 100644 index 1eec1d88717..00000000000 --- a/distrib/powerpc/kc/install.sh +++ /dev/null @@ -1,269 +0,0 @@ -#!/bin/sh -# -# $NetBSD: install.sh,v 1.1 1995/07/18 04:13:10 briggs Exp $ -# -# Copyright (c) 1994 Christopher G. Demetriou -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in the -# documentation and/or other materials provided with the distribution. -# 3. All advertising materials mentioning features or use of this software -# must display the following acknowledgement: -# This product includes software developed by Christopher G. Demetriou. -# 4. The name of the author may not be used to endorse or promote products -# derived from this software without specific prior written permission -# -# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR -# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES -# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. -# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# - -# NetBSD installation script. -# In a perfect world, this would be a nice C program, with a reasonable -# user interface. - -FSTABDIR=/mnt/etc # /mnt/etc -#DONTDOIT=echo - -VERSION=1.0 -FSTAB=${FSTABDIR}/fstab - -getresp() { - read resp - if [ "X$resp" = "X" ]; then - resp=$1 - fi -} - -getvar() { - echo $(eval $(echo "echo \$$1")) -} - -shiftvar() { - local - var - var="$1" - list="$(getvar $var)" - set -- $list - shift - setvar $var "$*" -} - -getparts() { - disklabel $1 2>/dev/null | sed -e '/^[ ][ ][ad-p]/!d' | - sed -e 's,^[ ]*\([a-p]\):[ ]*[0-9]*[ ]*[0-9]*[ ][ ]*\([a-zA-Z0-9.]*\).*,\1 \2,' | - sed -e ':a - N;${s/\n/ /g;p;d;} - ba' -} - -getdrives() { - local du thispart - for du in /dev/r${drivetype}?a; do - dd if=$du of=/dev/null bs=1b count=1 >/dev/null 2>&1 - if [ $? -eq 0 ]; then - thisunit=`echo $du | sed -e 's,/dev/r\(...\)a,\1,g'` - driveunits="$driveunits $thisunit" - else - continue; - fi - setvar $thisunit "$(getparts $thisunit)" - export $thisunit - done - export drivenunits -} - -prepdrive() { - echo "which drive would you like to prepare next?" - echo "choices are: ${driveunits}" - echo "" - getresp - case $resp in - *) ;; - esac -} - -echo "Welcome to the NetBSD ${VERSION} installation program." -echo "" -echo "This program is designed to help you put NetBSD on your hard disk," -echo "in a simple and rational way. Its main objective is to format," -echo "mount and create an fstab for your root (/) and user (/usr)" -echo "partitions." -echo "" -echo "As with anything which modifies your hard drive's contents, this" -echo "program can cause SIGNIFICANT data loss, and you are advised" -echo "to make sure your hard drive is backed up before beginning the" -echo "installation process." -echo "" -echo "Default answers are displyed in brackets after the questions." -echo "You can hit Control-C at any time to quit, but if you do so at a" -echo "prompt, you may have to hit return. Also, quitting in the middle of" -echo "installation may leave your system in an inconsistent state." -echo "" -echo -n "Proceed with installation? [n] " -getresp "n" -case "$resp" in - y*|Y*) - echo "scanning for the root device" - ;; - *) - echo "" - echo "OK, then. Enter 'halt' at the prompt to halt the" - echo "machine or 'reboot' to reboot it." - exit - ;; -esac - -drivetype=sd -sect_fwd="" - -# find out what units are possible for that disk, and query the user. -getdrives -for du in $driveunits; do - set -- $(getvar $du) - if [ $# -ge 2 -a "$1" = "a" -a "`echo $2 | sed -e 's,.*BSD.*,BSD,'`" = "BSD" ]; then - rdev=$du - fi -done - -echo "" -echo "The root device you have chosen is on: ${rdev}" -echo "" -# driveunits=`ls /dev/${drivetype}?a | sed -e 's,/dev/\(...\)a,\1,g'` -if [ "X${driveunits}" = "X" ]; then - echo "FATAL ERROR:" - echo "No devices for disks of type '${drivetype}'." - echo "This is probably a bug in the install disks." - echo "Exiting install program." - exit -fi - -echo "" -echo "THIS IS YOUR LAST CHANCE!!!" -echo "" -echo "(answering yes will format your root partition on $rdev)" -echo -n "Are you SURE you want NetBSD installed on your hard drive? (yes/no) " -answer="" -while [ "$answer" = "" ]; do - getresp - case $resp in - yes|YES) - echo "" - answer=yes - ;; - no|NO) - echo "" - echo -n "OK, then. enter 'halt' to halt the machine. " - exit - ;; - *) - echo -n "Please answer 'yes' or 'no'." - ;; - esac -done -echo "Initializing / (root) filesystem, and mounting..." -$DONTDOIT newfs /dev/r${rdev}a $name -$DONTDOIT mount -v /dev/${rdev}a /mnt -echo "" -echo -n "Creating a fstab..." -mkdir -p $FSTABDIR -echo "/dev/${rdev}a / ufs rw 1 1" > $FSTAB - -# get rid of this partition -shiftvar $rdev -shiftvar $rdev - -echo "" -echo "Now lets setup your /usr file system" -echo "(Once a valid input for drive and partition is seen" -echo "it will be FORMATTED and inserted in the fstab.)" -while [ "X$usrpart" = "X" ]; do - resp="" - drivename="" - while [ "X$resp" = "X" ]; do - echo "choices: $driveunits" - echo "which drive do you want /usr on?" - getresp - set -- $driveunits - while [ $# -gt 0 ]; do - if [ "X$resp" = "X$1" ]; then - drivename=$1 - break; - else - shift - fi - done - if [ "X$drivename" != "X" ]; then - break - fi - done - - usrpart="" - echo "You have selected $drivename" - echo "here is a list of partitions on $drivename" - disklabel $drivename 2>/dev/null | sed -e '/^[ ][ ][ad-p]:/p;/^#[ \t]*size/p;d' - echo "which partition would you like to format and have" - echo -n "mounted as /usr? (supply the letter): " - getresp - if [ "X$resp" = "X" ]; then - continue; - fi - - list=$(getvar $drivename) - set -- $list - while [ $# -gt 0 ]; do - if [ "$resp" = "$1" ]; then - if [ "`echo $2 | sed -e 's,.*BSD.*,BSD,'`" != "BSD" ]; then - echo "" - echo -n "$drivename$resp is of type $2 which is not" - echo " a BSD filesystem type" - break - fi - usrpart=$drivename$resp - break - else - shift - shift - fi - done - if [ "X$usrpart" = "X" ]; then - echo "$resp is not a valid input." - echo "" - fi -done - -echo "" -echo "Initializing /usr filesystem, and mounting..." -$DONTDOIT newfs /dev/r${usrpart} $name -$DONTDOIT mkdir -p /mnt/usr -$DONTDOIT mount -v /dev/${usrpart} /mnt/usr -echo "" -echo -n "Adding to fstab..." -echo "/dev/${usrpart} /usr ufs rw 1 2" >> $FSTAB -sync -echo " done." - -echo "" -echo "" -echo "OK! The preliminary work of setting up your disk is now complete," -echo "and you can install the actual NetBSD software." -echo "" -echo "Right now, your root is mounted on /mnt and your usr on /mnt/usr." -echo "You should consult the installation notes to determine how to load" -echo "and install the NetBSD distribution sets, and how to configure your" -echo "system when you are done." -echo "" -echo "GOOD LUCK!" -echo "" diff --git a/distrib/powerpc/kc/list b/distrib/powerpc/kc/list deleted file mode 100644 index c5cf8207ae7..00000000000 --- a/distrib/powerpc/kc/list +++ /dev/null @@ -1,10 +0,0 @@ -# $NetBSD: list,v 1.1 1995/07/18 04:13:12 briggs Exp $ - -# the disktab explanation file -COPY disktab.preinstall etc - -# and the installation tools -COPY dot.profile .profile -COPY dot.instutils .instutils -COPY install.sh install -SPECIAL chmod 755 install diff --git a/distrib/powerpc/miniroot/Makefile b/distrib/powerpc/miniroot/Makefile index a9c1a88b186..7405f07edf6 100644 --- a/distrib/powerpc/miniroot/Makefile +++ b/distrib/powerpc/miniroot/Makefile @@ -34,7 +34,7 @@ elfrdsetroot: ${TOP}//elfrdsetroot.c ${HOSTCC} -o elfrdsetroot ${TOP}/elfrdsetroot.c setroot: ${IMAGE} bsd elfrdsetroot - elfrdsetroot bsd < ${IMAGE} + ${.OBJDIR}/elfrdsetroot bsd < ${IMAGE} bsd: ${KERNEL} cp ${KERNEL} bsd