From: jsg <jsg@openbsd.org>
Date: Mon, 12 Sep 2022 10:16:09 +0000 (+0000)
Subject: spelling
X-Git-Url: http://artulab.com/gitweb/?a=commitdiff_plain;h=5770f4b17e244981b78bafd8b2703981c0df2883;p=openbsd

spelling
---

diff --git a/distrib/notes/alpha/prep b/distrib/notes/alpha/prep
index 4e360c61b2c..0f898800636 100644
--- a/distrib/notes/alpha/prep
+++ b/distrib/notes/alpha/prep
@@ -1,4 +1,4 @@
-dnl	$OpenBSD: prep,v 1.34 2021/03/15 09:29:51 jsg Exp $
+dnl	$OpenBSD: prep,v 1.35 2022/09/12 10:16:09 jsg Exp $
 OpenBSD/MACHINE requires the SRM console.  Some alphas come with
 the AlphaBIOS (also known as the ARC firmware on older machines) instead;
 this is what Windows NT uses. It is fairly simple to replace the AlphaBIOS
@@ -145,7 +145,7 @@ EISA configuration:
 
     ftp://ftp.hp.com/pub/alphaserver/firmware/other/utility/ecu/ntecuv111a.zip
 
-    Extract this archive to a newly FAT-formated 3"1/2 floppy disk to get
+    Extract this archive to a newly FAT-formatted 3"1/2 floppy disk to get
     a pristine ECU disk.
 
 SRM console boot device restrictions:
diff --git a/distrib/notes/arm64/prep b/distrib/notes/arm64/prep
index 232f9ec2b27..6b7ae156941 100644
--- a/distrib/notes/arm64/prep
+++ b/distrib/notes/arm64/prep
@@ -1,4 +1,4 @@
-dnl	$OpenBSD: prep,v 1.15 2022/04/06 23:01:05 kettenis Exp $
+dnl	$OpenBSD: prep,v 1.16 2022/09/12 10:16:09 jsg Exp $
 Please be aware that OpenBSD support for this platform is far from
 complete.
 
@@ -125,7 +125,7 @@ Install on systems without a supported miniroot:
  	cp /usr/local/share/dtb/arm64/vendor/board.dtb /mnt/vendor/
  	umount /mnt
 
-  For systems based on Allwinner Axx Socs:
+  For systems based on Allwinner Axx SoCs:
 
  	dd if=/usr/local/share/u-boot/board/u-boot-sunxi-with-spl.bin \
  	    of=/dev/sdXc bs=1024 seek=8
diff --git a/distrib/notes/hppa/install b/distrib/notes/hppa/install
index 7346530dce8..84c965d2304 100644
--- a/distrib/notes/hppa/install
+++ b/distrib/notes/hppa/install
@@ -1,4 +1,4 @@
-dnl	$OpenBSD: install,v 1.29 2020/07/05 22:27:47 tj Exp $
+dnl	$OpenBSD: install,v 1.30 2022/09/12 10:16:09 jsg Exp $
 dnl lots of texts coming from {mvme68k,vax}/install initially
 OpenBSDInstallPrelude
 
@@ -61,7 +61,7 @@ Booting from Network:
 
     In this case, you will need to set up rbootd on the server. Start by
     creating an /etc/rbootd.conf file on the bootserver. The format of this
-    file is the ethernet address followed by the LIF filename. Here is an
+    file is the Ethernet address followed by the LIF filename. Here is an
     example:
 
 	08:00:09:70:c4:11		lif{:--:}OSrev.img