From: mpi <mpi@openbsd.org>
Date: Wed, 7 May 2014 08:14:59 +0000 (+0000)
Subject: Kill the {nd6_,}useloopback buttons, using the loopback interface for
X-Git-Url: http://artulab.com/gitweb/?a=commitdiff_plain;h=4ceb7caa6a4b4929c23d33166ce6cac49ecbeaca;p=openbsd

Kill the {nd6_,}useloopback buttons, using the loopback interface for
local traffic is not optional.

ok mikeb@, stsp@, jca@
---

diff --git a/lib/libc/gen/sysctl.3 b/lib/libc/gen/sysctl.3
index 1bd5c0ef169..5812dd72a44 100644
--- a/lib/libc/gen/sysctl.3
+++ b/lib/libc/gen/sysctl.3
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: sysctl.3,v 1.234 2014/05/04 07:01:10 jmc Exp $
+.\"	$OpenBSD: sysctl.3,v 1.235 2014/05/07 08:14:59 mpi Exp $
 .\"
 .\" Copyright (c) 1993
 .\"	The Regents of the University of California.  All rights reserved.
@@ -27,7 +27,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.Dd $Mdocdate: May 4 2014 $
+.Dd $Mdocdate: May 7 2014 $
 .Dt SYSCTL 3
 .Os
 .Sh NAME
@@ -1665,7 +1665,6 @@ The currently defined protocols and names are:
 .It icmp6 Ta nd6_mmaxtries Ta integer Ta yes
 .It icmp6 Ta nd6_prune Ta integer Ta yes
 .It icmp6 Ta nd6_umaxtries Ta integer Ta yes
-.It icmp6 Ta nd6_useloopback Ta integer Ta yes
 .It icmp6 Ta nodeinfo Ta integer Ta yes
 .It icmp6 Ta rediraccept Ta integer Ta yes
 .It icmp6 Ta redirtimeout Ta integer Ta yes
@@ -1759,9 +1758,6 @@ This variable specifies the
 constant in IPv6 neighbor discovery specification
 .Pq RFC 4861 .
 .Pp
-.It Li icmp6.nd6_useloopback
-If set to non-zero, IPv6 will use the loopback interface for local traffic.
-.Pp
 .It Li icmp6.nodeinfo
 This variable enables responses to ICMPv6 node information queries.
 If set to 0, responses will not be generated for
diff --git a/sbin/sysctl/sysctl.8 b/sbin/sysctl/sysctl.8
index 58303c2323c..6a3340555f5 100644
--- a/sbin/sysctl/sysctl.8
+++ b/sbin/sysctl/sysctl.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: sysctl.8,v 1.179 2014/05/04 07:01:10 jmc Exp $
+.\"	$OpenBSD: sysctl.8,v 1.180 2014/05/07 08:14:59 mpi Exp $
 .\"	$NetBSD: sysctl.8,v 1.4 1995/09/30 07:12:49 thorpej Exp $
 .\"
 .\" Copyright (c) 1993
@@ -30,7 +30,7 @@
 .\"
 .\"	@(#)sysctl.8	8.2 (Berkeley) 5/9/95
 .\"
-.Dd $Mdocdate: May 4 2014 $
+.Dd $Mdocdate: May 7 2014 $
 .Dt SYSCTL 8
 .Os
 .Sh NAME
@@ -317,7 +317,6 @@ and a few require a kernel compiled with non-standard
 .It net.inet6.icmp6.nd6_delay Ta integer Ta yes
 .It net.inet6.icmp6.nd6_umaxtries Ta integer Ta yes
 .It net.inet6.icmp6.nd6_mmaxtries Ta integer Ta yes
-.It net.inet6.icmp6.nd6_useloopback Ta integer Ta yes
 .It net.inet6.icmp6.nodeinfo Ta integer Ta yes
 .It net.inet6.icmp6.errppslimit Ta integer Ta yes
 .It net.inet6.icmp6.nd6_maxnudhint Ta integer Ta yes
diff --git a/sys/netinet/icmp6.h b/sys/netinet/icmp6.h
index d370c36f3dc..c1af65e9bf6 100644
--- a/sys/netinet/icmp6.h
+++ b/sys/netinet/icmp6.h
@@ -1,4 +1,4 @@
-/*	$OpenBSD: icmp6.h,v 1.38 2013/10/24 11:20:16 deraadt Exp $	*/
+/*	$OpenBSD: icmp6.h,v 1.39 2014/05/07 08:14:59 mpi Exp $	*/
 /*	$KAME: icmp6.h,v 1.84 2003/04/23 10:26:51 itojun Exp $	*/
 
 /*
@@ -529,7 +529,6 @@ struct icmp6stat {
 #define ICMPV6CTL_ND6_DELAY	8
 #define ICMPV6CTL_ND6_UMAXTRIES	9
 #define ICMPV6CTL_ND6_MMAXTRIES		10
-#define ICMPV6CTL_ND6_USELOOPBACK	11
 #define ICMPV6CTL_NODEINFO	13
 #define ICMPV6CTL_ERRPPSLIMIT	14	/* ICMPv6 error pps limitation */
 #define ICMPV6CTL_ND6_MAXNUDHINT	15
@@ -552,7 +551,7 @@ struct icmp6stat {
 	{ "nd6_delay", CTLTYPE_INT }, \
 	{ "nd6_umaxtries", CTLTYPE_INT }, \
 	{ "nd6_mmaxtries", CTLTYPE_INT }, \
-	{ "nd6_useloopback", CTLTYPE_INT }, \
+	{ 0, 0 }, \
 	{ 0, 0 }, \
 	{ "nodeinfo", CTLTYPE_INT }, \
 	{ "errppslimit", CTLTYPE_INT }, \
@@ -576,7 +575,7 @@ struct icmp6stat {
 	&nd6_delay, \
 	&nd6_umaxtries, \
 	&nd6_mmaxtries, \
-	&nd6_useloopback, \
+	NULL, \
 	NULL, \
 	&icmp6_nodeinfo, \
 	&icmp6errppslim, \
diff --git a/sys/netinet/if_ether.c b/sys/netinet/if_ether.c
index 2e8c294dd9d..8c8433d5c7a 100644
--- a/sys/netinet/if_ether.c
+++ b/sys/netinet/if_ether.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: if_ether.c,v 1.126 2014/05/05 11:44:33 mpi Exp $	*/
+/*	$OpenBSD: if_ether.c,v 1.127 2014/05/07 08:14:59 mpi Exp $	*/
 /*	$NetBSD: if_ether.c,v 1.31 1996/05/11 12:59:58 mycroft Exp $	*/
 
 /*
@@ -90,7 +90,6 @@ LIST_HEAD(, llinfo_arp) llinfo_arp;
 struct	ifqueue arpintrq;
 int	arp_inuse, arp_allocated;
 int	arp_maxtries = 5;
-int	useloopback = 1;	/* use loopback interface for local traffic */
 int	arpinit_done;
 int	la_hold_total;
 
@@ -233,23 +232,6 @@ arp_rtrequest(int req, struct rtentry *rt)
 				break;
 		}
 		if (ifa) {
-			/*
-			 * This test used to be
-			 *	if (lo0ifp->if_flags & IFF_UP)
-			 * It allowed local traffic to be forced through
-			 * the hardware by configuring the loopback down.
-			 * However, it causes problems during network
-			 * configuration for boards that can't receive
-			 * packets they send.  It is now necessary to clear
-			 * "useloopback" and remove the route to force
-			 * traffic out to the hardware.
-			 *
-			 * In 4.4BSD, the above "if" statement checked
-			 * rt->rt_ifa against rt_key(rt).  It was changed
-			 * to the current form so that we can provide a
-			 * better support for multiple IPv4 addresses on a
-			 * interface.
-			 */
 			rt->rt_expire = 0;
 			SDL(gate)->sdl_alen = ETHER_ADDR_LEN;
 			memcpy(LLADDR(SDL(gate)),
@@ -260,8 +242,8 @@ arp_rtrequest(int req, struct rtentry *rt)
 			 * should not (ab)use it for any route related
 			 * to an interface of a different rdomain.
 			 */
-			if (useloopback)
-				rt->rt_ifp = lo0ifp;
+			rt->rt_ifp = lo0ifp;
+
 			/*
 			 * make sure to set rt->rt_ifa to the interface
 			 * address we are using, otherwise we will have trouble
diff --git a/sys/netinet6/nd6.c b/sys/netinet6/nd6.c
index 71a1aec6222..4365d95d784 100644
--- a/sys/netinet6/nd6.c
+++ b/sys/netinet6/nd6.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: nd6.c,v 1.115 2014/05/05 11:44:33 mpi Exp $	*/
+/*	$OpenBSD: nd6.c,v 1.116 2014/05/07 08:14:59 mpi Exp $	*/
 /*	$KAME: nd6.c,v 1.280 2002/06/08 19:52:07 itojun Exp $	*/
 
 /*
@@ -72,7 +72,6 @@ int	nd6_prune	= 1;	/* walk list every 1 seconds */
 int	nd6_delay	= 5;	/* delay first probe time 5 second */
 int	nd6_umaxtries	= 3;	/* maximum unicast query */
 int	nd6_mmaxtries	= 3;	/* maximum multicast query */
-int	nd6_useloopback = 1;	/* use loopback interface for local traffic */
 int	nd6_gctimer	= (60 * 60 * 24); /* 1 day: garbage collection timer */
 
 /* preventing too many loops in ND option parsing */
@@ -1163,21 +1162,20 @@ nd6_rtrequest(int req, struct rtentry *rt)
 			 * should not (ab)use it for any route related
 			 * to an interface of a different rdomain.
 			 */
-			if (nd6_useloopback) {
-				rt->rt_ifp = lo0ifp;
-				/*
-				 * Make sure rt_ifa be equal to the ifaddr
-				 * corresponding to the address.
-				 * We need this because when we refer
-				 * rt_ifa->ia6_flags in ip6_input, we assume
-				 * that the rt_ifa points to the address instead
-				 * of the loopback address.
-				 */
-				if (ifa != rt->rt_ifa) {
-					ifafree(rt->rt_ifa);
-					ifa->ifa_refcnt++;
-					rt->rt_ifa = ifa;
-				}
+			rt->rt_ifp = lo0ifp;
+
+			/*
+			 * Make sure rt_ifa be equal to the ifaddr
+			 * corresponding to the address.
+			 * We need this because when we refer
+			 * rt_ifa->ia6_flags in ip6_input, we assume
+			 * that the rt_ifa points to the address instead
+			 * of the loopback address.
+			 */
+			if (ifa != rt->rt_ifa) {
+				ifafree(rt->rt_ifa);
+				ifa->ifa_refcnt++;
+				rt->rt_ifa = ifa;
 			}
 		} else if (rt->rt_flags & RTF_ANNOUNCE) {
 			nd6_llinfo_settimer(ln, -1);
diff --git a/sys/netinet6/nd6.h b/sys/netinet6/nd6.h
index de300d99d96..fb001cad37d 100644
--- a/sys/netinet6/nd6.h
+++ b/sys/netinet6/nd6.h
@@ -1,4 +1,4 @@
-/*	$OpenBSD: nd6.h,v 1.36 2014/01/07 17:07:46 mikeb Exp $	*/
+/*	$OpenBSD: nd6.h,v 1.37 2014/05/07 08:14:59 mpi Exp $	*/
 /*	$KAME: nd6.h,v 1.95 2002/06/08 11:31:06 itojun Exp $	*/
 
 /*
@@ -215,7 +215,6 @@ extern int nd6_prune;
 extern int nd6_delay;
 extern int nd6_umaxtries;
 extern int nd6_mmaxtries;
-extern int nd6_useloopback;
 extern int nd6_maxnudhint;
 extern int nd6_gctimer;
 extern struct llinfo_nd6 llinfo_nd6;