From: kettenis <kettenis@openbsd.org>
Date: Sat, 20 Aug 2016 19:41:14 +0000 (+0000)
Subject: Various improvements to make this work better.
X-Git-Url: http://artulab.com/gitweb/?a=commitdiff_plain;h=3a48bb3d0ba1cbbab8d93f8783c9e3c66e473dcd;p=openbsd

Various improvements to make this work better.

Restrict the block size to 512 bytes for now.  While Linux and NetBSD seem
to allow larger block sizes (4096 and 8192 bytes) I'm getting errors wth an
older 2G Sandisk SD card that advertises support for 1024 byte blocks.

Implement switching between the 400 KHz "discovery" clock and the 25 MHz
"operational" clock.  Enable the right clock based on the SD/MMC "unit"
number.  Don't advertise highspeed capabilities for now as I'm not sure
how the adjust the clock timing in that case.

Fix the way we calculate the number of blocks and the size of the total data
transfer to matc what we do in sdhc(4).
---

diff --git a/sys/arch/armv7/sunxi/sximmc.c b/sys/arch/armv7/sunxi/sximmc.c
index fde1d8362a2..38276a0b069 100644
--- a/sys/arch/armv7/sunxi/sximmc.c
+++ b/sys/arch/armv7/sunxi/sximmc.c
@@ -1,4 +1,4 @@
-/* $OpenBSD: sximmc.c,v 1.1 2016/08/15 21:03:27 kettenis Exp $ */
+/* $OpenBSD: sximmc.c,v 1.2 2016/08/20 19:41:14 kettenis Exp $ */
 /* $NetBSD: awin_mmc.c,v 1.23 2015/11/14 10:32:40 bouyer Exp $ */
 
 /*-
@@ -40,6 +40,7 @@
 #include <dev/sdmmc/sdmmcchip.h>
 #include <dev/sdmmc/sdmmc_ioreg.h>
 
+#include <armv7/sunxi/sunxireg.h>
 #include <armv7/sunxi/sxiccmuvar.h>
 
 #include <dev/ofw/openfirm.h>
@@ -47,6 +48,8 @@
 #include <dev/ofw/ofw_pinctrl.h>
 #include <dev/ofw/fdt.h>
 
+//#define SXIMMC_DEBUG
+
 #define SXIMMC_GCTRL			0x0000
 #define SXIMMC_CLKCR			0x0004
 #define SXIMMC_TIMEOUT			0x0008
@@ -234,6 +237,7 @@ struct sximmc_softc {
 	bus_space_handle_t sc_clk_bsh;
 	bus_dma_tag_t sc_dmat;
 	int sc_node;
+	int sc_unit;
 
 	int sc_use_dma;
 
@@ -344,6 +348,7 @@ sximmc_attach(struct device *parent, struct device *self, void *aux)
 		return;
 
 	sc->sc_node = faa->fa_node;
+	sc->sc_unit = (faa->fa_reg[0].addr - SDMMC0_ADDR) / SDMMCx_SIZE;
 	sc->sc_bst = faa->fa_iot;
 	sc->sc_dmat = faa->fa_dmat;
 
@@ -355,12 +360,12 @@ sximmc_attach(struct device *parent, struct device *self, void *aux)
 
 	sc->sc_use_dma = 1;
 
-	printf("\n");
+	printf(": unit %d\n", sc->sc_unit);
 
 	pinctrl_byname(faa->fa_node, "default");
 
 	/* enable clock */
-	sxiccmu_enablemodule(CCMU_SDMMC0);
+	sxiccmu_enablemodule(CCMU_SDMMC0 + sc->sc_unit);
 	delay(5000);
 
 #if 0
@@ -447,7 +452,9 @@ sximmc_attach(struct device *parent, struct device *self, void *aux)
 	saa.saa_clkmax = awin_chip_id() == AWIN_CHIP_ID_A80 ? 48000 : 50000;
 #endif
 
+#if 0
 	saa.caps = SMC_CAPS_SD_HIGHSPEED | SMC_CAPS_MMC_HIGHSPEED;
+#endif
 
 	width = OF_getpropint(sc->sc_node, "bus-width", 1);
 	if (width >= 8)
@@ -524,6 +531,8 @@ sximmc_set_clock(struct sximmc_softc *sc, u_int freq)
 	delay(20000);
 #endif
 
+	sxiccmu_set_sd_clock(CCMU_SDMMC0 + sc->sc_unit, freq * 1000);
+	delay(20000);
 	return 0;
 }
 
@@ -653,7 +662,11 @@ sximmc_host_ocr(sdmmc_chipset_handle_t sch)
 int
 sximmc_host_maxblklen(sdmmc_chipset_handle_t sch)
 {
+#if 0
 	return 8192;
+#else
+	return 512;
+#endif
 }
 
 int
@@ -922,23 +935,22 @@ sximmc_exec_command(sdmmc_chipset_handle_t sch, struct sdmmc_command *cmd)
 		cmdval |= SXIMMC_CMD_CHECK_RSP_CRC;
 
 	if (cmd->c_datalen > 0) {
-		unsigned int nblks;
+		uint16_t blksize;
+		uint16_t blkcount;
 
 		cmdval |= SXIMMC_CMD_DATA_EXP | SXIMMC_CMD_WAIT_PRE_OVER;
 		if (!ISSET(cmd->c_flags, SCF_CMD_READ)) {
 			cmdval |= SXIMMC_CMD_WRITE;
 		}
 
-		nblks = cmd->c_datalen / cmd->c_blklen;
-		if (nblks == 0 || (cmd->c_datalen % cmd->c_blklen) != 0)
-			++nblks;
-
-		if (nblks > 1) {
+		blksize = MIN(cmd->c_datalen, cmd->c_blklen);
+		blkcount = cmd->c_datalen / blksize;
+		if (blkcount > 1) {
 			cmdval |= SXIMMC_CMD_SEND_AUTO_STOP;
 		}
 
-		MMC_WRITE(sc, SXIMMC_BLKSZ, cmd->c_blklen);
-		MMC_WRITE(sc, SXIMMC_BYTECNT, nblks * cmd->c_blklen);
+		MMC_WRITE(sc, SXIMMC_BLKSZ, blksize);
+		MMC_WRITE(sc, SXIMMC_BYTECNT, blkcount * blksize);
 	}
 
 	sc->sc_intr_rint = 0;