From: bluhm Date: Wed, 13 Oct 2021 18:55:04 +0000 (+0000) Subject: Sending live tcpdump output over SSH while running tests may drop X-Git-Url: http://artulab.com/gitweb/?a=commitdiff_plain;h=376af011dc9db367dfa83f2bc9939ef998c18ad7;p=openbsd Sending live tcpdump output over SSH while running tests may drop bpf logs in the kernel. Better write pcap files onto remote machine's disk and collect and convert after testing with live packets has finished. Move the TCP path MTU tests to the end. Otherwise TCP packets floating around could affect the packet counters of the subsequent tests. --- diff --git a/regress/sys/netinet/ipsec/Makefile b/regress/sys/netinet/ipsec/Makefile index 76fa3d46d89..76a2507fd61 100644 --- a/regress/sys/netinet/ipsec/Makefile +++ b/regress/sys/netinet/ipsec/Makefile @@ -1,4 +1,4 @@ -# $OpenBSD: Makefile,v 1.31 2021/02/01 18:11:46 bluhm Exp $ +# $OpenBSD: Makefile,v 1.32 2021/10/13 18:55:04 bluhm Exp $ # This test needs a manual setup of four machines, the make # target create-setup can be used to distribute the configuration. @@ -219,13 +219,13 @@ reflect: ssh ${ECO_SSH} make -C ${.CURDIR} nonxt-reflect ssh ${ECO_SSH} ${SUDO} rcctl start inetd nonxt_reflect -DUMPCMD= tcpdump -l -e -vvv -s 2048 -ni +DUMPCMD= tcpdump -s 2048 -ni stamp-bpf: Makefile stamp-drop # Run tcpdump on enc device of IPS machine. rm -f enc0.tcpdump -ssh ${IPS_SSH} ${SUDO} pkill -f "'^${DUMPCMD} enc0'" || true - ssh ${IPS_SSH} ${SUDO} ${DUMPCMD} enc0 >enc0.tcpdump & + ssh -f ${IPS_SSH} ${SUDO} ${DUMPCMD} enc0 -w ${.OBJDIR}/enc0.pcap sleep 5 # XXX rm -f stamp-stop @date >$@ @@ -234,7 +234,7 @@ stamp-pflog: stamp-pfctl stamp-drop # Run tcpdump on pflog device of IPS machine. rm -f pflog0.tcpdump -ssh ${IPS_SSH} ${SUDO} pkill -f "'^${DUMPCMD} pflog0'" || true - ssh ${IPS_SSH} ${SUDO} ${DUMPCMD} pflog0 >pflog0.tcpdump & + ssh -f ${IPS_SSH} ${SUDO} ${DUMPCMD} pflog0 -w ${.OBJDIR}/pflog0.pcap sleep 5 # XXX rm -f stamp-stop @date >$@ @@ -243,6 +243,9 @@ stamp-stop: # Stop tcpdump on enc and pflog device of IPS machine. sleep 5 # XXX -ssh ${IPS_SSH} ${SUDO} pkill -f "'^${DUMPCMD}'" +.for i in enc0 pflog0 + ssh ${IPS_SSH} cat ${.OBJDIR}/$i.pcap | tcpdump -evvvnr - >$i.tcpdump +.endfor @date >$@ # Old TCP connections send packets from time to time. These confuse @@ -362,24 +365,6 @@ run-send-tcp-${host}_${sec}_${mode}_${ipv}: echo $$$$ | nc -n -N -w 3 ${${host}_${sec}_${mode}_${ipv}} 7 |\ fgrep $$$$ -# Send large tcp stream, this should trigger path mtu discovery. -# but it works only fo a few cases - -.if "${sec}" == ESP && ("${mode}" == TUNNEL4 || "${mode}" == TUNNEL6) -TARGETS += tcp-pmtu-${host}_${sec}_${mode}_${ipv} -tcp pmtu ${host:L} ${sec:L} ${mode:L} ${ipv:L}:\ - run-send-tcp-pmtu-${host}_${sec}_${mode}_${ipv} -run-send-tcp-pmtu-${host}_${sec}_${mode}_${ipv}: - ${SUDO} route delete -host ${${host}_${sec}_${mode}_${ipv}} || true -.if "${host}" == ECO - ssh ${IPS_SSH} ${SUDO}\ - route delete -host ${${host}_${sec}_${mode}_${ipv}} || true -.endif - openssl rand -base64 10000 |\ - nc -n -N -w 8 ${${host}_${sec}_${mode}_${ipv}} 7 |\ - wc | fgrep ' 209 209 13545' -.endif - # Send no next header protocol 59 packets through the IPsec test. # They consist solely of an IPv6 header chain and trigger edge cases. @@ -408,6 +393,24 @@ run-send-nonxt-${host}_${sec}_${mode}_${ipv}: nonxt-sendrecv diff pkt.out - .endif +# Send large tcp stream, this should trigger path mtu discovery. +# but it works only in a few cases + +.if "${sec}" == ESP && ("${mode}" == TUNNEL4 || "${mode}" == TUNNEL6) +TARGETS += tcp-pmtu-${host}_${sec}_${mode}_${ipv} +tcp pmtu ${host:L} ${sec:L} ${mode:L} ${ipv:L}:\ + run-send-tcp-pmtu-${host}_${sec}_${mode}_${ipv} +run-send-tcp-pmtu-${host}_${sec}_${mode}_${ipv}: + ${SUDO} route delete -host ${${host}_${sec}_${mode}_${ipv}} || true +.if "${host}" == ECO + ssh ${IPS_SSH} ${SUDO}\ + route delete -host ${${host}_${sec}_${mode}_${ipv}} || true +.endif + openssl rand -base64 10000 |\ + nc -n -N -w 8 ${${host}_${sec}_${mode}_${ipv}} 7 |\ + wc | fgrep ' 209 209 13545' +.endif + .endfor .endfor