From: kettenis <kettenis@openbsd.org>
Date: Fri, 29 Sep 2023 15:51:48 +0000 (+0000)
Subject: Newer versions of U-Boot may disable the USB PHYs and gate their clocks.
X-Git-Url: http://artulab.com/gitweb/?a=commitdiff_plain;h=2479590b5a388e13e4156f0ee29903004934bd76;p=openbsd

Newer versions of U-Boot may disable the USB PHYs and gate their clocks.
Add support for the rk3399 to rkusbphy(4) and implement support for the
required clocks.

ok kevlo@
---

diff --git a/sys/dev/fdt/rkclock.c b/sys/dev/fdt/rkclock.c
index 1655fbb574b..17a62a6ea7b 100644
--- a/sys/dev/fdt/rkclock.c
+++ b/sys/dev/fdt/rkclock.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: rkclock.c,v 1.82 2023/07/09 16:33:49 patrick Exp $	*/
+/*	$OpenBSD: rkclock.c,v 1.83 2023/09/29 15:51:48 kettenis Exp $	*/
 /*
  * Copyright (c) 2017, 2018 Mark Kettenis <kettenis@openbsd.org>
  *
@@ -2952,6 +2952,24 @@ rk3399_enable(void *cookie, uint32_t *cells, int on)
 	}
 
 	switch (idx) {
+	case RK3399_CLK_USB2PHY0_REF:
+		HWRITE4(sc, RK3399_CRU_CLKGATE_CON(6), (5 << 0) << 16);
+		break;
+	case RK3399_CLK_USB2PHY1_REF:
+		HWRITE4(sc, RK3399_CRU_CLKGATE_CON(6), (6 << 0) << 16);
+		break;
+	case RK3399_CLK_UPHY0_TCPDPHY_REF:
+		HWRITE4(sc, RK3399_CRU_CLKGATE_CON(13), (4 << 0) << 16);
+		break;
+	case RK3399_CLK_UPHY0_TCPDCORE:
+		HWRITE4(sc, RK3399_CRU_CLKGATE_CON(13), (5 << 0) << 16);
+		break;
+	case RK3399_CLK_UPHY1_TCPDPHY_REF:
+		HWRITE4(sc, RK3399_CRU_CLKGATE_CON(13), (6 << 0) << 16);
+		break;
+	case RK3399_CLK_UPHY1_TCPDCORE:
+		HWRITE4(sc, RK3399_CRU_CLKGATE_CON(13), (7 << 0) << 16);
+		break;
 	case RK3399_ACLK_GMAC:
 		HWRITE4(sc, RK3399_CRU_CLKGATE_CON(32), (1 << 0) << 16);
 		break;
diff --git a/sys/dev/fdt/rkclock_clocks.h b/sys/dev/fdt/rkclock_clocks.h
index 55f696f194e..d55078ec527 100644
--- a/sys/dev/fdt/rkclock_clocks.h
+++ b/sys/dev/fdt/rkclock_clocks.h
@@ -187,7 +187,11 @@
 #define RK3399_CLK_MAC_RX		103
 #define RK3399_CLK_MAC_TX		104
 #define RK3399_CLK_MAC			105
+#define RK3399_CLK_USB2PHY0_REF		123
+#define RK3399_CLK_USB2PHY1_REF		124
+#define RK3399_CLK_UPHY0_TCPDPHY_REF	125
 #define RK3399_CLK_UPHY0_TCPDCORE	126
+#define RK3399_CLK_UPHY1_TCPDPHY_REF	127
 #define RK3399_CLK_UPHY1_TCPDCORE	128
 #define RK3399_CLK_USB3OTG0_REF		129
 #define RK3399_CLK_USB3OTG1_REF		130
diff --git a/sys/dev/fdt/rkusbphy.c b/sys/dev/fdt/rkusbphy.c
index 2f30f97cd88..e72258024c2 100644
--- a/sys/dev/fdt/rkusbphy.c
+++ b/sys/dev/fdt/rkusbphy.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: rkusbphy.c,v 1.2 2023/04/03 01:21:31 dlg Exp $ */
+/*	$OpenBSD: rkusbphy.c,v 1.3 2023/09/29 15:51:48 kettenis Exp $ */
 
 /*
  * Copyright (c) 2023 David Gwynne <dlg@openbsd.org>
@@ -61,6 +61,54 @@ struct rkusbphy_chip {
 	const struct rkusbphy_regs	*c_regs;
 };
 
+/*
+ * Since OpenBSD only supports USB ports in host mode, this driver
+ * actually powers down the OTG part of the PHY when it is enabled.
+ * This is why the OTG values in the tables below differ from this in
+ * (for example) Linux.
+ */
+
+/*
+ * RK3399 has two USB2PHY nodes that share a GRF.
+ */
+
+static const struct rkusbphy_regs rkusbphy_rk3399_usb0_regs = {
+	/*				shift,	mask,	set */
+	.clk_enable =	{ 0xe450,	4,	0x1,	0x0 },
+
+	.otg = {
+		.phy_enable =	{ 0xe454,	0,	0x3,	0x2 },
+	},
+
+	.host = {
+		.phy_enable =	{ 0xe458,	0,	0x3,	0x1 },
+	},
+};
+
+static const struct rkusbphy_regs rkusbphy_rk3399_usb1_regs = {
+	/*				shift,	mask,	set */
+	.clk_enable =	{ 0xe460,	4,	0x1,	0x0 },
+
+	.otg = {
+		.phy_enable =	{ 0xe464,	0,	0x3,	0x2 },
+	},
+
+	.host = {
+		.phy_enable =	{ 0xe468,	0,	0x3,	0x1 },
+	},
+};
+
+static const struct rkusbphy_chip rkusbphy_rk3399[] = {
+	{
+		.c_base_addr = 0xe450,
+		.c_regs = &rkusbphy_rk3399_usb0_regs,
+	},
+	{
+		.c_base_addr = 0xe460,
+		.c_regs = &rkusbphy_rk3399_usb1_regs,
+	},
+};
+
 /*
  * RK3568 has two USB2PHY nodes that have a GRF each. Each GRF has
  * the same register layout.
@@ -158,6 +206,7 @@ struct rkusbphy_id {
 #define RKUSBPHY_ID(_n, _c) { _n, _c, nitems(_c) }
 
 static const struct rkusbphy_id rkusbphy_ids[] = {
+	RKUSBPHY_ID("rockchip,rk3399-usb2phy", rkusbphy_rk3399),
 	RKUSBPHY_ID("rockchip,rk3568-usb2phy", rkusbphy_rk3568),
 };
 
@@ -213,7 +262,10 @@ rkusbphy_attach(struct device *parent, struct device *self, void *aux)
 	sc->sc_node = faa->fa_node;
 
 	grfph = OF_getpropint(sc->sc_node, "rockchip,usbgrf", 0);
-	sc->sc_grf = regmap_byphandle(grfph);
+	if (grfph)
+		sc->sc_grf = regmap_byphandle(grfph);
+	else
+		sc->sc_grf = regmap_bynode(OF_parent(sc->sc_node));
 	if (sc->sc_grf == NULL) {
 		printf("%s: rockchip,usbgrf 0x%x not found\n", DEVNAME(sc),
 		    grfph);