######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
#
-# $OpenBSD: termtypes.master,v 1.13 2000/02/06 07:05:57 millert Exp $
-#
# This version of terminfo.src is distributed with ncurses.
# Report bugs to
# bug-ncurses@gnu.org
#
# Version 10.2.1
-# Date: 2000/02/06 03:29:26
+# Date: 2000/03/05 03:53:58
# terminfo syntax
#
# Eric S. Raymond (current maintainer)
# John Kunze, Berkeley
# Craig Leres, Berkeley
#
-# Please e-mail changes to terminfo@ccil.org; the old termcap@berkeley.edu
+# Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
# address is no longer valid. The latest version can always be found at
-# <http://earthspace.net/terminfo>.
+# <http://www.tuxedo.org/terminfo>.
#
# PURPOSE OF THIS FILE:
#
# termcap/terminfo versions.
#
# Pointers to related resources (including the ncurses distribution) may
-# be found at <http://earthspace.net/terminfo>.
+# be found at <http://www.tuxedo.org/terminfo>.
#
# INTERNATIONALIZATION:
#
# the inverse sense from the cup string). The typical CPR value is
# \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
#
-# These capabilities are used by tac(1m), the terminfo action checker soon
-# to be distributed with ncurses.
+# These capabilities are used by tack(1m), the terminfo action checker
+# (distributed with ncurses 5.0).
#
# TABSET FILES
#
# As the ANSI/ECMA-48 standard and variants take firmer hold, and as
# character-cell terminals are increasingly replaced by X displays, much of
# this file is becoming a historical document (this is part of the reason for
-# the new organization, which puts ANSI types, xterm, free-Unix consoles,
+# the new organization, which puts ANSI types, xterm, Unix consoles,
# and vt100 up front in confidence that this will catch 95% of new hardware).
#
# For the terminal types still alive, I'd like to have manufacturer's
######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
#
-# This section describes terminal classes and maker brands that are still
+# This section describes terminal classes and brands that are still
# quite common.
#
#
# USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
#
+# (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
ansi77|ansi 3.64 standard 1977 version,
OTbs, am, mir,
cols#80, it#8, lines#24,
cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
- kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, ri=\EM,
- rmir=\E[4l, rmso=\E[m, rmul=\E[m, smir=\E[4h, smso=\E[7m,
- smul=\E[4m,
+ kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM,
+ rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
+ smso=\E[7m, smul=\E[4m,
# Procomm and some other ANSI emulations don't recognize all of the ANSI-
# standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
#### Linux consoles
#
+# This entry is good for the 1.2.13 or later version of the Linux console.
+#
+# ***************************************************************************
+# * *
+# * WARNING: *
+# * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
+# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
+# * character. Here are the keymap replacement lines that will set this up: *
+# * *
+# keycode 15 = Tab Tab
+# alt keycode 15 = Meta_Tab
+# shift keycode 15 = F26
+# string F26 ="\033[Z"
+# * *
+# * This has to use a key slot which is unfortunate (any unused one will *
+# * do, F26 is the higher-numbered one). The change ought to be built *
+# * into the kernel tables. *
+# * *
+# ***************************************************************************
+#
+# The 1.3.x kernels add color-change capabilities; if yours doesn't have this
+# and it matters, turn off <ccc>. The %02x escape used to implement this is
+# not back-portable to SV curses and not supported in ncurses versions before
+# 1.9.9. All linux kernels since 1.2.13 (at least) set the screen size
+# themselves; this entry assumes that capability.
+#
# This entry is good for the 1.2.13 or later version of the Linux console.
#
# ***************************************************************************
kbs=^H, kcub1=^H, kcud1=^J,
use=linux, use=klone+koi8acs,
-# From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
+# Entry for the latin1 and latin2 fonts
+linux-lat|linux with latin1 or latin2 alternate character set,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
+ use=linux,
+
+#### Mach
+#
+
+# From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
mach|Mach Console,
am, km,
cols#80, it#8, lines#25,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
use=mach,
-# Entry for the latin1 and latin2 fonts
-linux-lat|linux with latin1 or latin2 alternate character set,
- acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
- use=linux,
+#### OSF Unix
+#
+
+# OSF/1 1.1 Snapshot 2
+pmcons|pmconsole|PMAX console,
+ am,
+ cols#128, lines#57,
+ bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I,
+ ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
# SCO console and SOS-Syscons console for 386bsd
# (scoansi: had unknown capabilities
kpp=\E[Z,
use=klone+acs, use=klone+sgr,
+#### QNX
+#
# QNX 4.0 Console
# Michael's original version of this entry had <am@>, <smcup=\Ei>,
bsdos-ppc|PowerPC BSD/OS Console,
use=bsdos-pc,
+#### DEC VT52
+# (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
+vt52|dec vt52,
+ OTbs,
+ cols#80, it#8, lines#24,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
+ el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
+
#### DEC VT100 and compatibles
#
-# DEC terminals from the vt100 forward (and the vt52, way obsolete but still
-# the basis of some emulations) are collected here. Older DEC terminals and
-# micro consoles can be found in the `obsolete' section. More details on
+# DEC terminals from the vt100 forward are collected here. Older DEC terminals
+# and micro consoles can be found in the `obsolete' section. More details on
# the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
# found near the end of this file.
#
# its name to Boundless Technologies; see http://www.boundless.com.
#
-# (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
-vt52|dec vt52,
- OTbs,
- cols#80, it#8, lines#24,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
- cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
- el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
- kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
-
# NOTE: Any VT100 emulation, whether in hardware or software, almost
# certainly includes what DEC called the `Level 1 editing extension' codes;
# only the very oldest VT100s lacked these and there probably aren't any of
# reset upon login. Also setting the number of columns glitches
# the screen annoyingly. You can type "reset" to get them set.
#
+# The VT100 series terminals have cursor ("arrows") keys which can operate
+# in two different modes: Cursor Mode and Application Mode. Cursor Mode
+# is the reset state, and is assumed to be the normal state. Application
+# Mode is the "set" state. In Cursor Mode, the cursor keys transmit
+# "Esc [ {code}" sequences, conforming to ANSI standards. In Application
+# Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
+# was provided primarily as an aid to the porting of VT52 applications. It is
+# assumed that the cursor keys are normally in Cursor Mode, and expected that
+# applications such as vi will always transmit the <smkx> string. Therefore,
+# the definitions for the cursor keys are made to match what the terminal
+# transmits after the <smkx> string is transmitted. If the <smkx> string
+# is a null string or is not defined, then cursor keys are assumed to be in
+# "Cursor Mode", and the cursor keys definitions should match that assumption,
+# else the application may fail. It is also expected that applications will
+# always transmit the <rmkx> string to the terminal before they exit.
+#
+# The VT100 series terminals have an auxiliary keypad, commonly referred to as
+# the "Numeric Keypad", because it is a cluster of numeric and function keys.
+# The Numeric Keypad which can operate in two different modes: Numeric Mode and
+# Application Mode. Numeric Mode is the reset state, and is assumed to be
+# the normal state. Application Mode is the "set" state. In Numeric Mode,
+# the numeric and punctuation keys transmit ASCII 7-bit characters, and the
+# Enter key transmits the same as the Return key (Note: the Return key
+# can be configured to send either LF (\015) or CR LF). In Application Mode,
+# all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
+# always send the same "Esc O {code}" sequences. It is assumed that the keypad
+# is normally in Numeric Mode. If an application requires that the keypad be
+# in Application Mode then it is expected that the user, or the application,
+# will set the TERM environment variable to point to a terminfo entry which has
+# defined the <smkx> string to include the codes that switch the keypad into
+# Application Mode, and the terminfo entry will also define function key
+# fields to match the Application Mode control codes. If the <smkx> string
+# is a null string or is not defined, then the keypad is assumed to be in
+# Numeric Mode. If the <smkx> string switches the keypad into Application
+# Mode, it is expected that the <rmkx> string will contain the control codes
+# necessary to reset the keypad to "Normal" mode, and it is also expected that
+# applications which transmit the <smkx> string will also always transmit the
+# <rmkx> string to the terminal before they exit.
+#
# Here's a diagram of the VT100 keypad keys with their bindings.
# The top line is the name of the key (some DEC keyboards have the keys
# labelled somewhat differently, like GOLD instead of PF1, but this is
ip=$<7>, rmir=\E[4h, smir=\E[4l,
use=vt100,
-# vt220:
# This vt220 description maps F5--F9 to the second block of function keys
# at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
# with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
# PF1--PF4 are used as F1--F4.
#
-vt220|vt200|DEC VT220 in vt100 emulation mode,
- OTbs, OTpt, am, mir, xenl, xon,
+vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
+ am, mir, xenl, xon,
cols#80, lines#24, vt#3,
- OTnl=^J,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
- is2=\E[1;24r\E[24;1H, kbs=\177, kcub1=\EOD, kcud1=\EOB,
- kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
+ is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
smso=\E[7m, smul=\E[4m,
-vt220-w|vt200-w|DEC vt220 in wide mode,
- cols#132,
- rs3=\E[?3h, use=vt220,
-
-#
-# vt220d:
-# This vt220 description regards F6--F10 as the second block of function keys
-# at the top of the keyboard. This mapping follows the description given
-# in the VT220 Programmer Reference Manual and agrees with the labeling
-# on some terminals that emulate the vt220. There is no support for an F5.
-# See vt220 for an alternate mapping.
-#
-vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
- kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
- kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
- kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
- kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- use=vt220,
-
-vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
- am@,
- rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
-# This is misnamed (see xterm-8bit for an example of 8-bit controls)
-vt220-8|dec vt220 8 bit terminal,
- OTbs, am, mc5i, mir, msgr, xenl, xon,
- cols#80, it#8, lines#24,
+# A much better description of the VT200/220; used to be vt220-8
+vt220|vt200|dec vt220,
+ am, mc5i, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
il=\E[%p1%dL, il1=\E[L, ind=\ED,
- is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=\177, kcub1=\EOD,
- kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf10=\E[21~,
+ is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m,
rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
smam=\E[?7h, smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+vt220-w|vt200-w|DEC vt220 in wide mode,
+ cols#132,
+ rs3=\E[?3h, use=vt220,
+vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
+ am, mc5i, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M,
+ csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
+ cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
+ cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
+ dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
+ ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
+ flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
+ ich=\233%p1%d@, if=/usr/share/tabset/vt100,
+ il=\233%p1%dL, il1=\233L, ind=\ED,
+ is2=\233?7h\233>\233?1h\E F\233?4l, kbs=^H,
+ kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
+ kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
+ kf13=\23325~, kf14=\23326~, kf17=\23331~, kf18=\23332~,
+ kf19=\23333~, kf2=\EOQ, kf20=\23334~, kf3=\EOR, kf4=\EOS,
+ kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~,
+ kfnd=\2331~, khlp=\23328~, khome=\233H, kich1=\2332~,
+ knp=\2336~, kpp=\2335~, krdo=\23329~, kslt=\2334~, lf1=pf1,
+ lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i,
+ nel=\EE, rc=\E8, rev=\2337m, ri=\EM, rmacs=^O, rmam=\233?7l,
+ rmir=\2334l, rmso=\23327m, rmul=\23324m, rs1=\233?3l,
+ sc=\E7, sgr0=\233m, smacs=^N, smam=\233?7h, smir=\2334h,
+ smso=\2337m, smul=\2334m, tbc=\2333g,
+
+#
+# vt220d:
+# This vt220 description regards F6--F10 as the second block of function keys
+# at the top of the keyboard. This mapping follows the description given
+# in the VT220 Programmer Reference Manual and agrees with the labeling
+# on some terminals that emulate the vt220. There is no support for an F5.
+# See vt220 for an alternate mapping.
+#
+vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+ kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
+ kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
+ kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ use=vt220-old,
+
+vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
+ am@,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
# vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
# (not an official DEC entry!)
# it has a vt220 and will get fouled up coming out of emacs
#
# From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
+# (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
vt200-js|vt220-js|dec vt200 series with jump scroll,
am,
cols#80,
dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
il1=\E[L, ind=\ED,
is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
- kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
- kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
rf=/usr/lib/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
- rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, smdc=,
+ rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
# This was DEC's vt320. Use the purpose-built one below instead
# I left out <sgr> because of its RIDICULOUS complexity,
# and the resulting fact that it causes the termcap translation of the entry
# to SMASH the 1k-barrier...
-# From: Adam Thompson <thompson@xanth.magic.mb.ca> Sept 10 1995
+# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
# (vt320: uncommented <fsl> --esr)
vt320|vt300|dec vt320 7 bit terminal,
am, eslok, hs, mir, msgr, xenl,
flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, home=\E[H, ht=^I,
hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
- kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=\ED,
is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
- kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
- is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=\177,
+ is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
- is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=\177,
+ is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
- is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=\177,
+ is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
# RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
# I can send the address if requested.
# (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
-# From: Adam Thompson <thompson@xanth.magic.mb.ca> Sept 10 1995
+# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
z340|zstem vt340 terminal emulator 132col 42line,
lines#42,
is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
- dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
- enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H,
- hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
- il=\E[%p1%dL, il1=\E[L, ind=^J,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
+ flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
+ ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
+ il1=\E[L, ind=^J,
is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
ka1=\EOw, ka3=\EOu, kb2=\EOy, kbeg=\EOE, kbs=^H, kc1=\EOq,
kc3=\EOs, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
# This version was released in XFree86 3.3.3 (November 1998).
# Besides providing printer support, it exploits a new feature that allows
# xterm to use terminfo-based descriptions with the titeInhibit resource.
+# -- the distribution contained incorrect khome/kend values -TD
xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
mc5i,
blink=\E[5m, ich1@, invis=\E[8m,
- is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kend=\E[4~,
- kfnd@, khome=\E[1~, kslt@, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
- rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
- rs2=\E[!p\E[?3;4l\E[4l\E>,
+ is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
+ mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rmcup=\E[?1047l\E[?1048l,
+ rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
smcup=\E[?1048h\E[?1047h,
use=xterm-xf86-v33,
# This beta version will probably be released in XFree86 4.0.
xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
+ npc,
kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
+ sgr=\E[0%?%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
smcup=\E[?1049h,
use=xterm-xf86-v333,
# CSI \E [ \233
#
xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
- OTbs, am, bce, km, mc5i, mir, msgr, xenl,
+ OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl,
colors#8, cols#80, it#8, lines#24, pairs#64,
acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
- cvvis=\233?25h, dch=\233%p1%dP, dch1=\233P,
- dl=\233%p1%dM, dl1=\233M, ech=\233%p1%dX, ed=\233J,
- el=\233K, el1=\2331K, enacs=\E(B\E)0,
- flash=\233?5h\233?5l, home=\233H, hpa=\233%i%p1%dG,
- ht=^I, hts=\210, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L,
- ind=^J, invis=\2338m,
+ dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
+ ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
+ enacs=\E(B\E)0, flash=\233?5h$<100/>\233?5l,
+ home=\233H, hpa=\233%i%p1%dG, ht=^I, hts=\210,
+ ich=\233%p1%d@, il=\233%p1%dL, il1=\233L, ind=^J,
+ invis=\2338m,
is2=\E7\E G\233r\233m\233?7h\233?1;3;4;6l\2334l\E8\E>,
ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=^H,
kc1=\217q, kc3=\217s, kcub1=\217D, kcud1=\217B,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
- dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
- flash=\E[?5h\E[?5l, home=\E[H, ht=^I, hts=\EH,
- ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
- is1=\E[?47l\E=\E[?1l,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h\E[?5l,
+ home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
+ il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E[?47l\E=\E[?1l,
is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l,
kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kLFT=\E[d, kNXT=\E[6$,
kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy, kb2=\EOu, kbs=^H,
clear=\EP\EE0;0;, cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;,
cub=\Eq-%p1%d;, cub1=^H, cud=\Ep%p1%d;, cud1=\EB,
cuf=\Eq%p1%d;, cuf1=\ED, cup=\EE%p1%d;%p2%d;,
- cuu=\Ep-%p1%d;, cuu1=\EA, cvvis=\Ea, dch=\EI%p1%d;,
- dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;, ech=\Ej%p1%d;, ed=\EN,
- el=\EK, el1=\EL, enacs=\0, home=\EE0;0;, ht=^I, hts=\Eh,
+ cuu=\Ep-%p1%d;, cuu1=\EA, dch=\EI%p1%d;, dch1=\EI1;,
+ dl=\ER%p1%d;, dl1=\ER1;, ech=\Ej%p1%d;, ed=\EN, el=\EK,
+ el1=\EL, enacs=\0, home=\EE0;0;, ht=^I, hts=\Eh,
il=\EQ%p1%d;, il1=\EQ1;, ind=\EG, is2=\ES\Er0;\Es0;,
kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED, kcuu1=\EA,
kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01, kf10=\EF10,
sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
smul=\E[4m,
-# Entries for use by the FSF's `screen' program. The screen and
+# Entries for use by the `screen' program by Juergen Weigert,
+# Michael Schroeder, Oliver Laumann. The screen and
# screen-w entries came with version 3.7.1. The screen2 and screen3 entries
# come from University of Wisconsin and may be older.
# (screen: added <cnorm> on ANSI model -- esr)
sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
#
# (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
-nwp512|news|nwp514|news40|vt100-bm|sony vt100 emulator 40 lines,
+nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
OTbs,
lines#40,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8, use=news-old-unk,
#
# (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
# also the alias vt100-bm.
-nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|sony vt100 emulator 33 lines,
+nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
OTbs,
lines#33,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8, use=news-old-unk,
#
# (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
-nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|sony vt100 emulator 33 lines,
- OTbs,
+nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
lines#31,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8, use=news-old-unk,
#
home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
+# From: jew@venus.sunquest.com
+# Date: 19 Feb 93 23:41:07 GMT
+# Here's a combination of ansi and vt100 termcap
+# entries that works nearly perfectly for me
+# (Gateway 2000 Handbook and Microsoft Works 3.0):
+pcmw|PC running Microsoft Works,
+ am, xenl,
+ cols#80, it#8, lines#24, vt#3,
+ bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
+ clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J,
+ cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
+ cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
+ ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
+ rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/lib/tabset/vt100,
+ ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
+ tbc=\E[3g$<2/>,
######## COMMON TERMINAL TYPES
#
# Vox: 1-(916)-785-4363 (Technical response line for VDTs)
# 1-(800)-633-3600 (General customer support)
#
+#
+# As of March 1998, HP no longer has any terminals in production.
+# The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
+# supported (they still have parts). So are the 2392a and 2394a.
+# See the WORKSTATION CONSOLES section for the 700s.
+#
# Generic HP terminal - this should (hopefully) work on any HP terminal.
hpgeneric|hp|hewlett-packard generic terminal,
ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
-# (hp70092: added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
-hp70092|hp70092a|hp70092A|70092|HP 700/92,
+hp70092|hp70092a|hp70092A|HP 700/92,
am, da, db, xhp,
cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
rmso=\ET, smso=\EU,
-# From: Jeff Siegal <jbs@athena.mit.edu>
+# From: Jeff Siegal <jbs@quiotix.com>
vi55|Visual 55,
OTbs, am, mir, msgr,
cols#80, it#8, lines#24,
wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
bel@,
use=wy85-w,
+
+# From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
+# This copes with an apparent firmware bug in the wy85. He writes:
+# "What I did was change leave the terminal cursor keys set to Normal
+# (instead of application), and change \E[ to \233 for all the keys in
+# terminfo. At one point, I found some reference indicating that this
+# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
+# me), but I can't find that and the server under my bookmark to "Wyse
+# Technical" isn't responding. So there's the question of wether the wy85
+# terminfo should reflect the manufactuer's intended behaviour of the terminal
+# or the actual."
+wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
+ am, hs, mc5i, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
+ dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
+ ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
+ enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
+ fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
+ ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
+ ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
+ is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
+ is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
+ kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
+ kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
+ kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
+ kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
+ kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
+ kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
+ kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
+ khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
+ kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
+ mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
+ rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
+ rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
+ rs3=\E[?5l, sc=\E7,
+ sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ tsl=\E[40h\E7\E[25;%i%p1%dH,
#
# Wyse 185 emulating a vt320 7 bit mode.
#
#
# Wyse 520 with 24 data lines and status (terminal status)
# with EPC keyboard.
-wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines,
+wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
hs@,
dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, use=wy520-epc,
#
# Wyse 520 with visual bell.
-wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell,
+wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
flash=\E[30h\E\,\E[30l$<100>,
use=wy520-epc,
#
use=wy520-epc,
#
# Wyse 520 in 132-column mode with visual bell.
-wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns,
+wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
flash=\E[30h\E\,\E[30l$<100>,
use=wy520-epc-w,
#
rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, use=wy520-36pc,
#
# Wyse 520 in 132-column, 48 lines with EPC keyboard
-wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines,
+wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
cols#132, wsl#132,
rs2=\E[?3h,
rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, use=wy520-48pc,
kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L,
rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>,
use=dg200,
-# dg450 from cornell
+
+# dg450 from Cornell (not official)
dg450|dg6134|data general 6134,
cub1@, cuf1=^X, use=dg200,
+
+# Not official...
# Note: lesser Dasher terminals will not work with vi because vi insists upon
# having a command to move straight down from any position on the bottom line
# and scroll the screen up, or a direct vertical scroll command. The 460 and
lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, rev=\E[7m,
ri=\E[T, rmso=\E[m, rmul=\E[05, sgr0=\E[m, smso=\E[7m,
smul=\E[4m,
-# From: Wayne Throop <mcnc!rti-sel!rtp47!throopw>
+# From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
# Data General 605x
# Ought to work for a Model 6242, Type D210 as well as a 605x.
# Note that the cursor-down key transmits ^Z. Job control users, beware!
#### Datamedia (dm)
#
-# Datamedia was headquartered in Nashua, New Hampshire in 1993.
-# As of early 1996, at least one company called `Datamedia' has been taken
-# over by:
-#
-# Axent Technologies, Inc.
-# 2400 Research Boulevard
-# Rockville, Maryland 20850
-# voice: +1 301/258-5043
-# fax: +1 301/330-5756
-# email: <info@axent.com>
-#
-# makers of OmniGuard client/server security software. They are a software
-# only company and no longer make terminals. However, the operator there
-# told me that she had once spoken to a customer looking for Datamedia
-# terminals who'd mentioned a Datamedia in New Jersey. This is backed up
-# by comp.terminals posting describing the ID plate on the back of a
-# "Datamedia 3000" terminal. Was this an earlier incarnation of Axent?
-# Inquiring minds want to know...
+# Datamedia was headquartered in Nashua, New Hampshire until it went
+# out of business in 1993, but the ID plates on the terminals referred
+# to the factory in Pennsauken, NJ. The factory was sold to a PCB board
+# manufacturer which threw out all information about the terminals.
#
cs10|colorscan|Datamedia Color Scan 10,
clear=\E[H\E[2J$<50/>, cud1=^J,
cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
-# From: Adam Thompson <thompson@xanth.magic.mb.ca> Sept 10 1995
+# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
dt80-sas|Datamedia DT803/DTX for SAS usage,
am, bw,
cols#80, lines#24,
sb2|sb3|fixed superbee,
xsb@, use=superbee,
+#### Beehive Medical Electronics
+#
+# Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
+# Regarding your question though; Beehive terminals weren't made by Harris.
+# They were made by Beehive Medical Electronics in Utah. They went out of
+# business in the early '80s.
+#
+# (OK, then, I don't know why a couple of these say "harris beehive".)
+#
+
# Reports are that most of these Beehive entries (except superbee) have not
# been tested and do not work right. <rmso> is a trouble spot. Be warned.
cols#80, lines#24,
bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J,
+# There was an early Australian kit-built computer called a "Microbee".
+# It's not clear whether this is for one of those or for a relative
+# of the Beehive.
microb|microbee|micro bee series,
OTbs, am,
cols#80, it#8, lines#24,
hft-c-old|HFT with Color PC850,
colors#8, pairs#64,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
+hft|AIWS High Function Terminal,
+ am, xon,
+ cols#80, lines#25,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
+ cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
+ ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
+ kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
+ kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
+ ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m,
ibm-system1|system1|ibm system/1 computer,
am, xt,
cols#80, lines#24,
bel=^G, clear=^Z, cub1=^H, cuf1=^\,
cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
ind=^J,
-ibm5081|hft|IBM Megapel Color display,
+# lft-pc850 : IBM Low Function Terminal Device
+# lft "supports" underline, bold, and blink in the sense that the lft code
+# sets all the right bits. HOWEVER, depending upon the adapter, these
+# attributes may or may not be supported by the device driver.
+lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
+ am, bw, msgr, xon,
+ cols#80, it#8, lines#25,
+ acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
+ home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
+ il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
+ kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
+ kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
+ kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
+ kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
+ kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
+ kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
+ kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
+ kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
+ kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
+ kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
+ kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
+ kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
+ kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
+ rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
+ sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g,
+ibm5081|IBM Megapel Color display,
acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
s1ds=\E(0, sgr0=\E[0m\E(B,
use=ibm5154,
# identical, except for case, to lower-case ones. I also uncommented the acsc
# capabilities.X
#
-# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
+# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
# DEC vt200/300 with color capabilities added.
ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
colors#8, pairs#64,
op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ncr260vt300an,
-# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
+# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
# DEC vt200/300 with color capabilities added.
ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
colors#8, pairs#64,
op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ncr260vt300wan,
-# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a DEC
-# vt200/300 with color capabilities added.
+# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
+# DEC vt200/300 with color capabilities added.
ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
colors#8, pairs#64,
op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ncr260vt300pp,
# 7 - Enable / Disable CR turnoff
# 8 - Enable / Disable backspace
#
+# Since each attribute parameter is 0 or 1, we shift each attribute (standout,
+# reverse, blink, dim, and underline) the appropriate number of bits (by
+# multiplying the 0 or 1 by a correct factor to shift) so the bias character,
+# '@' is (effectively) "or"ed with each attribute to generate the proper third
+# character in the <ESC>0 sequence. The <sgr> string implements the following
+# equation:
+#
+# ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
+# ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
+#
+# Where: P1 <==> Standout attribute parameter
+# P2 <==> Underline attribute parameter
+# P3 <==> Reverse attribute parameter
+# P4 <==> Blink attribute parameter
+# P5 <==> Dim attribute parameter
# From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
ncr7900i|ncr7900|ncr 7900 model 1,
am, bw, ul,
kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J,
tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
+# Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
+# The user can enter a CTRL-B to get out of this locked state.
+# In <hpa>, we want to output the character given by the formula:
+# ((col / 10) * 16) + (col % 10) where "col" is "p1"
ncr7901|ncr 7901 model,
am, bw, ul,
cols#80, lines#24,
el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K,
# From IBM, Thu May 5 19:35:27 1983
-# (commented out <smir>=\200R because we don't know <rmir> -- esr)
+# (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
OTbs, am,
cols#80, lines#24,
# From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
# Added a few more entries, converted caret-type control sequence (^x) entries
# to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
+# Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
#
# :as:, :ae: Support for alternate character sets.
# :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
- indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H, kcub1=\ED,
- kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\E9~, kf1=\E0~,
- kf2=\E1~, kf3=\E2~, kf4=\E3~, kf5=\E4~, kf6=\E5~, kf7=\E6~,
- kf8=\E7~, kf9=\E8~, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
- rmacs=^O, rmso=\E[m, rmul=\E[m, rs1=\Ec, sgr0=\E[m, smacs=^N,
- smso=\E[7m, smul=\E[4m,
+ indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
+ kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
+ kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
+ ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
+ rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
# From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
# (amiga: added empty <acsc> to suppress a warning.
smir=\E[4h, smso=\E[7m, smul=\E[4m,
# basis from Peter Harrison, Computer Graphics Lab, San Francisco
# ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
+#
+# On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
+# The Basis 108 was a Apple II clone, manufactured by the "Basis
+# Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
+# about 1,5 km from where I live, but doesn't build own computers any
+# more). A Basis 108 featured a really heavy (cast aluminium?) case, was
+# equipped with one or two 5.25" disk drives, had a monochrome and colour
+# video output for a TV set or a dedicated monitor and several slots for
+# Apple II cards. Basis 108 were quite popular at german schools before
+# the advent of the IBM PC. They run, for example, the UCSD Pascal
+# development system (which I used even in 1993 to program the steering
+# and data recording for our school's experimental solar panel :), Apple DOS
+# or CP/M.
# (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
basis|BASIS108 computer with terminal translation table active,
clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
smso=\E[7m,
+#### Bull (bq, dku, vip)
+#
+# (Adapted for terminfo; AIX extension capabilities translated -- esr)
+
+#============================================#
+# BULL QUESTAR 210 `SDP' terminals emulation #
+#============================================#
+#
+# Description written by R.K.Saunders (Bull Transac)
+#
+# Modifications written by F. Girard (Bull MTS)
+# 19-05-87 V02.00.01
+# 17-12-87 V02.00.02
+# 15-09-89 V02.00.05
+#
+# Typical technical selections F1 (modes SDP/ROLL):
+# -------------------------------------------------------
+# | 01 02 03 04 05 06 07 08 09 10 |
+# | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
+# | |
+# | 11 12 13 14 15 16 17 18 19 20 |
+# | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
+# | |
+# | 21 22 23 24 25 26 27 28 29 30 |
+# | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
+# | |
+# | 31 32 33 34 35 36 37 38 39 40 |
+# | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
+# -------------------------------------------------------
+# Typical firmware identification F5 "etat 6":
+# P287.02.04b (AZERTY)
+# P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
+# P298.03.03 (monochrome) or P374.03.02 (colour)
+#
+# SM SDP mode (VIP command): ^[[?=h
+# RIS (erases screen): ^[c
+# DMI disable keyboard: ^[`
+# SM double rendition mode: ^[[?>h
+# RM solicited status mode: ^[[5l
+# RM character mode: ^[[>l
+# RM echoplex mode: ^[[12l
+# RM column tab mode: ^[[18l
+# RM forbid SS2 keyboard mode: ^[[?<l
+# SM scroll mode: ^[[=h
+# FCF enable XON/XOFF: ^[P1s^[\
+# MTL select end msg character: ^[[^Wp
+# EMI enable keyboard: ^[b
+# RIS retour etat initial: ^[c
+# enable FC keypad: ^[[?<h,
+# MPW map status line window: ^[PY99:98^[\
+# SCP select status line: ^[[0;98v
+# ED erase entire partition: ^[[2J
+# SCP select main partition: ^[[v
+# SM character insertion mode: ^[[4h
+# RM character replacement mode: ^[[4l
+# COO cursor on: ^[[r
+# COO cursor off: ^[[1r
+# SGR dim (turquoise) rev attr: ^[[2;7m
+# SGR Data normal attr: ^[[m
+# SO Line-graphic mode ON: ^N
+# SI Line-graphic mode OFF: ^O
+# MC start routing to printer: ^[[5i
+# MC stop routing to printer: ^M^[[4i
+#
+
+# This entry covers the following terminals:
+# dku7102, tws2102, and tws models 2105 to 2112
+tws-generic|dku7102|Bull Questar tws terminals,
+ am, eslok, hs, mir, msgr, xenl, xhp@, xon,
+ cols#80, it#8, lines#24, wsl#80,
+ acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
+ bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
+ cnorm=\E[r, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
+ cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
+ dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
+ fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
+ il1=\E[L, ind=^J, invis=\E[0;8m,
+ is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
+ is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
+ is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
+ ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
+ kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
+ kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
+ khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
+ mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
+ rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
+ rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
+ sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
+ smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[2g,
+ tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
+tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
+ dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
+ use=tws-generic,
+tws2103|xdku|BULL Questar tws2103,
+ ht=^I, use=tws-generic,
+tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
+ ht=^I,
+ use=tws2102-sna,
+dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
+ clear=\E[2J\E[H, cup@, dl@, dl1@,
+ dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
+ il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
+ use=tws-generic,
+dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
+ blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
+ smso=\E[0;4;5;7m, smul=\E[0;2m,
+ use=tws-generic,
+
+#=========================================================#
+# BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
+#=========================================================#
+#
+# Description written by J. Staerck (BULL SA)
+# Copyright (c) 1989 BULL SA
+#---------------------------------------------------------------------------
+# This entry is used for terminals with vt320 emulation mode
+# and following set-up :
+# 8 bit ISO Latin Character Set (ISO 8859-1),
+# 7 bit Control Characters,
+# 80 columns screen.
+# Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
+# They are used in string capabilities with vt220-320 emulation mode.
+# In the following DEC definitions, two kinds of terminfo databases are
+# provided :
+# 1. the first with Command Sequence Introducer starting with escape
+# sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
+# 2. the second with Command Sequence Introducer starting with escape
+# sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
+# Soft Terminal Reset esc [ ! p
+# RIS (erases screen): esc c
+# DECKPNM numeric keypad mode: esc >
+# DECKPAM applic. keypad mode: esc =
+# DECSTBM Scrolling region: esc [ r
+# SCS select G0 = US: esc ( B
+# SCS select G1 = line-graphic: esc ) 0
+# Select 7-bit C1 controls: esc sp F
+# Select 8-bit C1 controls: esc sp G
+# Select cursor home: esc [ H
+# Select erase screen: esc [ J
+# SM KAM lock keyboard: esc [ 2 h
+# RM KAM unlock keyboard: esc [ 2 l
+# SM SRM local echo off: esc [ 1 2 h
+# RM SRM local echo on: esc [ 1 2 l
+# SM LNM New line : esc [ 2 0 h
+# RM LNM return = CR only: esc [ 2 0 l
+# SM DECCKM cursor keys mode: esc [ ? 1 h
+# RM DECCKM appli. keys mode: esc [ ? 1 l
+# SM DECANM ANSI mode on: esc [ ? 2 h
+# RM DECANM ANSI mode off: esc [ ? 2 l
+# SM DECCOLM 132-column screen: esc [ ? 3 h
+# RM DECCOLM 80-column screen: esc [ ? 3 l
+# SM DECSCLM Smooth scroll: esc [ ? 4 h
+# RM DECSCLM Jump scroll: esc [ ? 4 l
+# SM DECSCNM screen light backgr. esc [ ? 5 h
+# RM DECSCNM screen dark backgr. esc [ ? 5 l
+# SM DECOM move within margins: esc [ ? 6 h
+# RM DECOM move outside margins: esc [ ? 6 l
+# SM DECAWM auto right margin: esc [ ? 7 h
+# RM DECAWM auto right margin: esc [ ? 7 l
+# SM DECARM auto repeat: esc [ ? 8 h
+# RM DECARM auto repeat: esc [ ? 8 l
+# DECSASD Select active main: esc [ 0 $ }
+# DECSASD Select active status: esc [ 1 $ }
+# DECSSDT Select status none: esc [ 0 $ ~
+# DECSSDT Select status indic.: esc [ 1 $ ~
+# DECSSDT Select status host-wr: esc [ 2 $ ~
+# SM DECTCEM Visible cursor: esc [ ? 2 5 h
+# RM DECTCEM Invisible cursor: esc [ ? 2 5 l
+# SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
+# RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
+# SM DECNKM numeric keypad mode: esc [ ? 6 6 h
+# RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
+# SM DECKBUM clavier informatique esc [ ? 6 8 h
+# RM DECKBUM clavier bureautique: esc [ ? 6 8 l
+# DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
+# or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
+# or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
+# DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
+# Char. and Line attributes: esc [ Ps ... Ps m
+# with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
+# and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
+#
+
+# This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
+bq300|Bull vt320 ISO Latin 1 80 columns terminal,
+ am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX,
+ ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
+ flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
+ hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
+ is1=\E[63;1"p\E[2h,
+ is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
+ is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
+ kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
+ kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
+ kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
+ kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
+ khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
+ mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
+ ri=\EM, rmacs=^O, rmam=\E[?7l, rmcup=\E[?7h, rmir=\E[4l,
+ rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E[!p,
+ rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
+ sgr0=\E[0m\E(B, smacs=^N, smam=\E[?7h,
+ smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~,
+bg300-rv|Bull vt320 reverse 80 columns,
+ flash=\E[?5l$<50>\E[?5h,
+ is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, use=bq300,
+bq300-w|Bull vt320 132 columns,
+ cols#132, wsl#132,
+ is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
+ rs2=\E[?3h,
+ use=bq300,
+bq300-w-rv|Bull vt320 reverse mode 132 columns,
+ cols#132, wsl#132,
+ flash=\E[?5l$<50>\E[?5h,
+ is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
+ rs2=\E[?3h,
+ use=bq300,
+
+# This entry is used for terminals with vt320 emulation mode
+# and following set-up :
+# 8 bit ISO Latin Character Set (ISO 8859-1),
+# 8 bit Control Characters, (CSI coded as x9B for ESC [)
+# 80 columns screen.
+# Soft Terminal Reset csi ! p
+# RIS (erases screen): esc c
+# DECKPNM numeric keypad mode: esc >
+# DECKPAM applic. keypad mode: esc =
+# DECSTBM Scrolling region: esc [ r
+# SCS select G0 = US: esc ( B
+# SCS select G1 = line-graphic: esc ) 0
+# Select 7-bit C1 controls: esc sp F
+# Select 8-bit C1 controls: esc sp G
+# Select cursor home: csi H
+# Select erase screen: csi J
+# SM KAM lock keyboard: csi 2 h
+# RM KAM unlock keyboard: csi 2 l
+# SM SRM local echo off: csi 1 2 h
+# RM SRM local echo on: csi 1 2 l
+# SM LNM New line : csi 2 0 h
+# RM LNM return = CR only: csi 2 0 l
+# SM DECCKM cursor keys mode: csi ? 1 h
+# RM DECCKM appli. keys mode: csi ? 1 l
+# SM DECANM ANSI mode on: csi ? 2 h
+# RM DECANM ANSI mode off: csi ? 2 l
+# SM DECCOLM 132-column screen: csi ? 3 h
+# RM DECCOLM 80-column screen: csi ? 3 l
+# SM DECSCLM Smooth scroll: csi ? 4 h
+# RM DECSCLM Jump scroll: csi ? 4 l
+# SM DECSCNM screen light backgr. csi ? 5 h
+# RM DECSCNM screen dark backgr. csi ? 5 l
+# SM DECOM move within margins: csi ? 6 h
+# RM DECOM move outside margins: csi ? 6 l
+# SM DECAWM auto right margin: csi ? 7 h
+# RM DECAWM auto right margin: csi ? 7 l
+# SM DECARM auto repeat: csi ? 8 h
+# RM DECARM auto repeat: csi ? 8 l
+# DECSASD Select active main: csi 0 $ }
+# DECSASD Select active status: csi 1 $ }
+# DECSSDT Select status none: csi 0 $ ~
+# DECSSDT Select status indic.: csi 1 $ ~
+# DECSSDT Select status host-wr: csi 2 $ ~
+# SM DECTCEM Visible cursor: csi ? 2 5 h
+# RM DECTCEM Invisible cursor: csi ? 2 5 l
+# SM DECNCRM 7 bits NCR set: csi ? 4 2 h
+# RM DECNCRM Multi or ISO latin: csi ? 4 2 l
+# DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
+# or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
+# DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
+# Char. and Line attributes: csi Ps ... Ps m
+# with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
+# and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
+# (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
+bq300-8|Bull vt320 full 8 bits 80 columns,
+ am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
+ clear=\233H\233J, cnorm=\233?25h, cr=^M,
+ csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cud=\233%p1%dB,
+ cuf=\233%p1%dC, cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA,
+ cvvis=\233?25h, dch=\233%p1%dP, dch1=\233P,
+ dl=\233%p1%dM, dsl=\2331$}\2332$~\n\2330$},
+ ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
+ enacs=\E(B\E)0, flash=\233?5h$<50>\233?5l, fsl=\2330$},
+ home=\233H, ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL,
+ ind=\ED, is1=\E[63;2"p\E[2h,
+ is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
+ is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
+ ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
+ kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
+ kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
+ kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
+ kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
+ kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
+ kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
+ khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
+ krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
+ lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
+ rev=\2337m, ri=\EM, rmacs=^O, rmam=\233?7l, rmcup=\233?7h,
+ rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
+ rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
+ sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
+ sgr0=\2330m\E(B, smacs=^N, smam=\233?7h,
+ smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
+ smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
+bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
+ flash=\233?5l$<50>\233?5h,
+ is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, use=bq300-8,
+bq300-8w|Bull vt320 8-bit 132 columns,
+ cols#132, wsl#132,
+ is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
+ rs2=\233?3h,
+ use=bq300-8,
+bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
+ cols#132, wsl#132,
+ flash=\233?5l$<50>\233?5h,
+ is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
+ rs2=\233?3h,
+ use=bq300-8,
+
+# This entry is used for terminals with vt320 emulation mode
+# a 102 keys keyboard (PC scancode !) and following set-up :
+# 8 bit ISO Latin Character Set (ISO 8859-1),
+# 7 bit Control Characters,
+# 80 columns screen.
+bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
+ kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
+ kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
+ kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
+ kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
+ kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ krdo@, kslt@, lf1@, lf2@, lf3@, lf4@,
+ use=bq300,
+bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
+ flash=\E[?5l$<50>\E[?5h,
+ is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, use=bq300-pc,
+bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
+ cols#132, wsl#132,
+ is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
+ rs2=\E[?3h,
+ use=bq300-pc,
+bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
+ cols#132, wsl#132,
+ flash=\E[?5l$<50>\E[?5h,
+ is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
+ rs2=\E[?3h,
+ use=bq300-pc,
+# 8 bit ISO Latin Character Set (ISO 8859-1),
+# 8 bit Control Characters,
+# 80 columns screen.
+bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
+ kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
+ kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
+ kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
+ kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
+ kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
+ khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
+ kslt@, lf1@, lf2@, lf3@, lf4@,
+ use=bq300-8,
+bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
+ flash=\E[?5l$<50>\E[?5h,
+ is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, use=bq300-8-pc,
+bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
+ cols#132, wsl#132,
+ is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
+ rs2=\E[?3h,
+ use=bq300-8-pc,
+bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
+ cols#132, wsl#132,
+ flash=\E[?5l$<50>\E[?5h,
+ is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
+ rs2=\E[?3h,
+ use=bq300-8-pc,
+
+#======================================================#
+# BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
+#======================================================#
+
+# normal mode, 8 bits, 80 columns terminal.
+# RES reset : ^[e
+# RIS reset initial state: ^[c
+# BLE bell enable ^[h
+# BLD bell disable ^[g
+# CAMS char. attr. mode set ^[[D
+# CAMR char. attr. mode reset ^[[G
+# CLR clear ^[`
+# KBU keyboard unlock (set) ^[[W
+# KBL keyboard lock (reset) ^[[X
+# CM character mode (async.) ^[k
+# NEP non echoplex mode (by host) ^[l
+# EP echoplex mode (by host) ^[m
+# IM insert mode set ^[[I
+# IM insert mode reset ^[[J
+# RMS roll mode set ^[r
+# RMR roll mode reset ^[q
+# SM78 set mode vip7800 ^[[1q
+# SD scroll up (72 lines) ^[[0s
+# SD scroll down (72 lines) ^[[1s
+# RBM block mode reset ^[[E
+# SLS status line set ^[w
+# SLR status line reset ^[v
+# SLL status line lock ^[O
+# LGS Line-graphic mode set ^[G
+# LGR Line-graphic mode reset ^[F
+# TBC tab clear (at cursor pos.) ^[[g
+# TBI tab initialize ^[[N
+# TBS tab set (at cursor pos.) ^[p
+# PDS print data space ^[[0p
+# PHD print host data ^[[3p
+# PDT print data terminator ^[[<p
+# PRES print adapter reset ^[[2p
+# SSPR multi-part. reset ^[[<>u
+# SSP0 partition 0 set ^[[00u
+# SSP1 partition n format 1 ^[[PnPnSTRINGu
+# SSP2 partition n format 2 ^[[PnPnSTRINGu
+# SSP3 partition n format 3 ^[[PnPnu
+# ATR attribute (visual)
+# blink : ^[sB
+# dim : ^[sL
+# hide (blank) : ^[sH
+# restore : ^[sR
+# inverse video : ^[sI
+# prot. : ^[sP
+# underline : ^[s_
+# reset : ^{
+#
+# This covers the vip7800 and BQ3155-vip7800
+vip|Bull Questar 3155-7800,
+ am, eslok, hs, km, mc5i, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3, wsl#80,
+ acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
+ cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
+ dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
+ flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
+ hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH,
+ is2=\E[00u\E[<>001001024080024080u\E[01u,
+ is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
+ kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
+ kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
+ kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
+ kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
+ kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
+ kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
+ khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
+ kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
+ lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
+ mc5=\E[3p, nel=^M, prot=\EsP, rev=\EsI,
+ ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
+ rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
+ sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
+ smul=\Es_, tbc=\E[N, tsl=\Ew,
+# normal screen, 8 bits, 132 columns terminal.
+vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
+ cols#132, wsl#132,
+ is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
+vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
+ lines#72,
+ is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
+vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
+ cols#132, lines#72, wsl#132,
+ is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
+
#### Chromatics
#
bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J,
ep40|ep4000|execuport 4000,
cols#136, use=ep4080,
-# Adam Thompson <thompson@xanth.magic.mb.ca> tells us:
+# Adam Thompson <athompso@pangea.ca> tells us:
# Informer series - these are all portable units, resembling older
# automatic bread-baking machines. The terminal looks like a `clamshell'
# design, but isn't. The structure is similar to the Direct terminals,
# terminal from 1984/85. The function key definitions k0-k5 represent the
# edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
# NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
+#
+# Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
+# I had a couple of scopes (3221) like this once where I used to work, around
+# the 1987 time frame if memory serves me correctly. These scopes were made
+# by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
+# compatible. The 3220 was a plain text terminal like the VT-220, the 3221
+# was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
+# was like the VT-241 (color with Regis + Sixel Graphics). These terminals
+# (3221) cost about $1500 each, and one was always broken -- had to be sent
+# back to the shop for repairs.
+# The only real advantage these scopes had over the VT-240's were:
+# 1) They were faster in the Regis display, or at least the ones I did
+# 2) They had a handy debugging feature where you could split-screen the
+# scope, the graphics would appear on the top, and the REGIS commands would
+# appear on the bottom. I don't remember the VT-240s being able to do that.
+# I would swear that LANPAR Technologies was in MA someplace, but since I
+# don't work at the same place anymore, and those terminals and manuals were
+# long since junked, I cannot be any more sure than that.
+#
# (v3220: removed obsolete ":kn#10:",
# I added <rmam>/<smam> based on the init string -- esr)
v3220|LANPAR Vision II model 3220/3221/3222,
# * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
# and adding kcbt -TD
#
+# 2000/1/12
+# * remove incorrect khome/kend from xterm-xf86-v333, which was based on
+# nonstandard resource settings -TD
+#
+# 2000/2/26
+# * minor fixes for xterm-*, based on Debian #58530 -TD
+#
+# 2000/3/4
+# * add several terminal types from esr's "11.0", as well as comments.
+# bg300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
+# vt220-8bit, vt220-old, wy85-8bit
+#
# The following sets edit modes for GNU EMACS.
# Local Variables:
# fill-prefix:"\t"
projects / openbsd / commitdiff