merged w/ existing stuff...
awk nuked away from ramdisk, only MAKEDEV needs it.
--- /dev/null
+# $Id: Makefile.inc,v 1.1 1997/04/13 17:17:43 mickey Exp $
+
+# TOP is assumed to be defined by Makefile including this one.
+
+CBIN= instbin
+COMMONDIR= ${TOP}/inst-common
+
+MOUNT_POINT?= /mnt
+VND?= vnd0
+VND_DEV= /dev/${VND}a
+VND_RDEV= /dev/r${VND}a
+IMAGE?= xxx${REV}.fs
+PID!= echo $$$$
+REALIMAGE= /tmp/image.${PID}
+MDEC= ${DESTDIR}/usr/mdec
+
+LISTS= ${COMMONDIR}/list ${.CURDIR}/list
+.if defined(KERBEROS)
+CRUNCHCONF= ${COMMONDIR}/${CBIN}-krb.conf
+.else
+CRUNCHCONF= ${COMMONDIR}/${CBIN}.conf
+.endif
+MTREE= ${COMMONDIR}/mtree.conf
+
+all: ${CBIN}
+.ifndef FLOPPY3
+ dd if=/dev/zero of=${REALIMAGE} bs=10k count=120
+ vnconfig -v -c ${VND} ${REALIMAGE}
+ disklabel -w -B -b /usr/mdec/fdboot -s /usr/mdec/bootfd ${VND} floppy5
+ newfs -O -m 0 -o space -i 3000 -c 80 ${VND_RDEV} floppy5
+.else
+ dd if=/dev/zero of=${REALIMAGE} bs=10k count=144
+ vnconfig -v -c ${VND} ${REALIMAGE}
+ disklabel -w -B -b /usr/mdec/fdboot -s /usr/mdec/bootfd ${VND} floppy3
+ newfs -O -m 0 -o space -i 3000 -c 80 ${VND_RDEV} floppy3
+.endif
+ mount ${VND_DEV} ${MOUNT_POINT}
+ mtree -def ${MTREE} -p ${MOUNT_POINT}/ -u
+ TOPDIR=${TOP} CURDIR=${.CURDIR} OBJDIR=${.OBJDIR} \
+ TARGDIR=${MOUNT_POINT} sh ${TOP}/runlist.sh ${LISTS}
+ @echo ""
+ @df -i ${MOUNT_POINT}
+ @echo ""
+ umount ${MOUNT_POINT}
+ vnconfig -u ${VND}
+ cat /*bin/* > /dev/null
+ cp ${REALIMAGE} ${IMAGE}
+ rm ${REALIMAGE}
+
+unconfig:
+ -umount -f ${MOUNT_POINT}
+ -vnconfig -u ${VND}
+ -/bin/rm -f ${IMAGE}
+
+${CBIN}.mk ${CBIN}.cache ${CBIN}.c: ${CRUNCHCONF}
+ crunchgen -D ${TOP}/../../.. -m ${CBIN}.mk -L ${DESTDIR}/usr/lib \
+ ${CRUNCHCONF}
+
+${CBIN}: ${CBIN}.mk ${CBIN}.cache ${CBIN}.c
+ make -f ${CBIN}.mk all
+.if defined(KERBEROS)
+ mv ${CBIN}-krb ${CBIN}
+.endif
+
+install:
+ cp ${IMAGE} ${DESTDIR}/snapshot/
+
+clean cleandir:
+ /bin/rm -f *.core ${IMAGE} ${CBIN} ${CBIN}.mk \
+ ${CBIN}.cache *.o *.lo *.c
+
+.include <bsd.obj.mk>
+.include <bsd.subdir.mk>
--- /dev/null
+# $OpenBSD: dot.commonutils,v 1.1 1997/04/13 17:17:44 mickey Exp $
+#
+# Copyright (c) 1994 Christopher G. Demetriou
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+# must display the following acknowledgement:
+# This product includes software developed by Christopher G. Demetriou.
+# 4. The name of the author may not be used to endorse or promote products
+# derived from this software without specific prior written permission
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Installation utilites (functions), to get OpenBSD installed on
+# the hard disk. These are meant to be invoked from the shell prompt,
+# by people installing OpenBSD.
+
+# we know that /etc/fstab is only generated on the hard drive
+dest_dir=/
+if [ ! -f /etc/fstab ]; then
+ dest_dir=/mnt/
+fi
+
+# counter for possible shared library confusion
+TAR=/bin/tar
+GUNZIP="/usr/bin/gzip -d"
+
+Set_tmp_dir()
+{
+ def_tmp_dir=`pwd`
+ if [ "$def_tmp_dir" = "/" -o "$def_tmp_dir" = "/mnt" ]; then
+ def_tmp_dir="$dest_dir"usr/distrib
+ fi
+
+ echo -n "What directory should be used to find and/or store "
+ echo "installtion"
+ echo -n "files? [$def_tmp_dir] "
+ read tmp_dir
+ if [ "$tmp_dir" = "" ]; then
+ tmp_dir=$def_tmp_dir
+ fi
+ if [ ! -d "$tmp_dir" ]; then
+ /bin/rm -rf $tmp_dir
+ mkdir -p $tmp_dir
+ fi
+}
+
+Tmp_dir()
+{
+ if [ "$tmp_dir" = "" ]; then
+ Set_tmp_dir
+ fi
+ cd $tmp_dir
+}
+
+Load_fd()
+{
+ Tmp_dir
+ which=
+ echo "Don't forget that you can't load from the drive you booted from."
+ echo ""
+
+ while [ "$which" != "0" -a "$which" != "1" ]; do
+ echo -n "Read from which floppy drive ('0' or '1')? [1] "
+ read which
+ if [ "X$which" = "X" ]; then
+ which=1
+ fi
+ done
+ echo ""
+ echo "WARNING: during the floppy loading process, you should only"
+ echo "use Control-C at the prompt."
+ echo ""
+ while echo -n \
+ "Insert floppy (hit Control-C to terminate, enter to load): "
+ do
+ read foo
+ mount -r -t msdos /dev/fd${which}a /mnt2
+ cp -rp /mnt2/* .
+ umount /mnt2
+ done
+}
+
+Load_tape()
+{
+ Tmp_dir
+ echo -n "Which tape drive will you be using? [rst0] "
+ read which
+ if [ "X$which" = "X" ]; then
+ which=rst0
+ fi
+ echo -n "Insert the tape into the tape drive and hit return to "
+ echo -n "continue..."
+ read foo
+ echo "Extracting files from the tape..."
+ $TAR -xvpf /dev/$which
+ echo "Done."
+}
+
+Extract()
+{
+ Tmp_dir
+ echo -n "Would you like to list the files as they're extracted? [n] "
+ read verbose
+ case $verbose in
+ y*|Y*)
+ tarverbose=v
+ ;;
+ *)
+ tarverbose=
+ ;;
+ esac
+ cat "$1"* | $GUNZIP | (cd $dest_dir ; $TAR -xp"$tarverbose"f - )
+}
--- /dev/null
+# $OpenBSD: instbin-krb.conf,v 1.1 1997/04/13 17:17:44 mickey Exp $
+#
+# instbin.conf - unified binary for the inst/upgr floppies
+#
+
+srcdirs bin sbin usr.bin/less usr.bin usr.sbin gnu/usr.bin
+
+progs awk bad144 cat chmod chown chroot cp dd df disklabel ed expr fsck_ffs
+progs ftp fdisk
+progs ifconfig init less ln ls mkdir mknod mount mount_cd9660
+progs mount_ffs mount_msdos mount_nfs mount_kernfs
+progs mv newfs pax pdksh ping pwd reboot rm route
+progs sed shutdown slattach strings stty sync test tip umount
+progs rsh restore gzip
+
+ln chown chgrp
+ln fsck_ffs fsck
+ln less more
+ln pax tar
+ln pdksh sh
+ln pdksh -sh # init invokes the shell this way
+ln test [
+ln reboot halt
+
+libs -ledit -lutil -ltermcap -lkrb -ldes -ll -lm
--- /dev/null
+# $OpenBSD: instbin.conf,v 1.1 1997/04/13 17:17:45 mickey Exp $
+#
+# instbin.conf - unified binary for the inst/upgr floppies
+#
+
+srcdirs bin sbin usr.bin/less usr.bin usr.sbin gnu/usr.bin
+
+progs awk bad144 cat chmod chown chroot cp dd df disklabel ed expr fsck_ffs
+progs ftp fdisk
+progs ifconfig init less ln ls mkdir mknod mount mount_cd9660
+progs mount_ffs mount_msdos mount_nfs mount_kernfs
+progs mv newfs pax pdksh ping pwd reboot rm route
+progs sed shutdown slattach strings stty sync test tip umount
+progs rsh restore gzip
+
+ln chown chgrp
+ln fsck_ffs fsck
+ln less more
+ln pax tar
+ln pdksh sh
+ln pdksh -sh # init invokes the shell this way
+ln test [
+ln reboot halt
+
+libs -ledit -lutil -ltermcap -ll -lm
--- /dev/null
+# $Id: list,v 1.1 1997/04/13 17:17:45 mickey Exp $
+
+# copy the crunched binary, link to it, and kill it
+COPY ${OBJDIR}/instbin instbin
+LINK instbin bin/cat
+LINK instbin bin/chmod
+LINK instbin bin/cp
+LINK instbin bin/cpio
+LINK instbin bin/dd
+LINK instbin bin/df
+LINK instbin bin/ed
+LINK instbin bin/expr
+LINK instbin bin/ln
+LINK instbin bin/ls
+LINK instbin bin/mkdir
+LINK instbin bin/mv
+LINK instbin bin/pwd
+LINK instbin bin/rm
+LINK instbin bin/sh
+LINK instbin bin/stty
+LINK instbin bin/sync
+LINK instbin bin/tar
+LINK instbin bin/test
+LINK instbin bin/[
+LINK instbin sbin/disklabel
+LINK instbin sbin/fdisk
+LINK instbin sbin/fsck
+LINK instbin sbin/fsck_ffs
+LINK instbin sbin/halt
+LINK instbin sbin/ifconfig
+LINK instbin sbin/init
+LINK instbin sbin/mknod
+LINK instbin sbin/mount
+LINK instbin sbin/mount_cd9660
+LINK instbin sbin/mount_ffs
+LINK instbin sbin/mount_msdos
+LINK instbin sbin/mount_nfs
+LINK instbin sbin/mount_kernfs
+LINK instbin sbin/newfs
+LINK instbin sbin/ping
+LINK instbin sbin/restore
+LINK instbin sbin/reboot
+LINK instbin sbin/route
+LINK instbin sbin/shutdown
+LINK instbin sbin/slattach
+LINK instbin sbin/umount
+SYMLINK /bin/cat usr/bin/awk
+SYMLINK /bin/cat usr/bin/chgrp
+SYMLINK /bin/cat usr/bin/ftp
+SYMLINK /bin/cat usr/bin/gzip
+SYMLINK /bin/cat usr/bin/gunzip
+SYMLINK /bin/cat usr/bin/less
+SYMLINK /bin/cat usr/bin/more
+SYMLINK /bin/cat usr/bin/rsh
+SYMLINK /bin/cat usr/bin/sed
+SYMLINK /bin/cat usr/bin/strings
+SYMLINK /bin/cat usr/bin/tip
+SYMLINK /bin/cat usr/sbin/bad144
+SYMLINK /bin/cat usr/sbin/chown
+SYMLINK /bin/cat usr/sbin/chroot
+SPECIAL /bin/rm instbin
+
+# copy the MAKEDEV script and make some devices
+COPY ${DESTDIR}/dev/MAKEDEV dev/MAKEDEV
+SPECIAL cd dev; sh MAKEDEV floppy
+SPECIAL /bin/rm dev/MAKEDEV
+
+# we need the contents of /usr/mdec
+COPYDIR ${DESTDIR}/usr/mdec usr/mdec
+
+# various files that we need in /etc for the install
+COPY ${DESTDIR}/etc/group etc/group
+COPY ${DESTDIR}/etc/master.passwd etc/master.passwd
+COPY ${DESTDIR}/etc/passwd etc/passwd
+COPY ${DESTDIR}/etc/protocols etc/protocols
+COPY ${DESTDIR}/etc/pwd.db etc/pwd.db
+COPY ${DESTDIR}/etc/services etc/services
+COPY ${DESTDIR}/etc/spwd.db etc/spwd.db
+
+# and the common installation tools
+COPY ${TOPDIR}/inst-common/dot.commonutils .commonutils
+COPY ${TOPDIR}/inst-common/termcap.pc3 usr/share/misc/termcap
--- /dev/null
+# $Id: mtree.conf,v 1.1 1997/04/13 17:17:46 mickey Exp $
+
+/set type=dir uname=root gname=wheel mode=0755
+# .
+.
+
+# ./bin
+bin
+# ./bin
+..
+
+# ./dev
+dev
+# ./dev
+..
+
+# ./etc
+etc
+# ./etc
+..
+
+# ./mnt
+mnt
+# ./mnt
+..
+
+# ./mnt2
+mnt2
+# ./mnt2
+..
+
+# ./kern
+kern
+# ./kern
+..
+
+# ./sbin
+sbin
+# ./sbin
+..
+
+# ./tmp
+tmp mode=01777
+# ./tmp
+..
+
+# ./usr
+usr
+
+# ./usr/bin
+bin
+# ./usr/bin
+..
+
+# ./usr/mdec
+mdec
+# ./usr/mdec
+..
+
+# ./usr/sbin
+sbin
+# ./usr/sbin
+..
+
+# ./usr/share
+share
+
+# ./usr/share/misc
+misc
+# ./usr/share/misc
+..
+
+# ./usr/share
+..
+
+# ./usr
+..
--- /dev/null
+/* $OpenBSD: rdsetroot.c,v 1.1 1997/04/13 17:17:46 mickey Exp $ */
+/* $NetBSD: rdsetroot.c,v 1.2 1995/10/13 16:38:39 gwr Exp $ */
+
+/*
+ * Copyright (c) 1994 Gordon W. Ross
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Copy a ramdisk image into the space reserved for it.
+ * Kernel variables: rd_root_size, rd_root_image
+ */
+
+#include <sys/types.h>
+#include <sys/file.h>
+#include <sys/mman.h>
+
+#include <stdio.h>
+#include <a.out.h>
+
+extern off_t lseek();
+
+struct exec head;
+char *file;
+
+/* Virtual addresses of the symbols we frob. */
+long rd_root_image_va, rd_root_size_va;
+
+/* Offsets relative to start of data segment. */
+long rd_root_image_off, rd_root_size_off;
+
+/* value in the location at rd_root_size_off */
+int rd_root_size_val;
+
+/* pointers to pieces of mapped file */
+char *dataseg;
+
+/* and lengths */
+int data_len;
+int data_off;
+int data_pgoff;
+
+main(argc,argv)
+ char **argv;
+{
+ int fd, n;
+ int *ip;
+ char *cp;
+
+ if (argc < 2) {
+ printf("%s: missing file name\n", argv[0]);
+ exit(1);
+ }
+ file = argv[1];
+
+ fd = open(file, O_RDWR);
+ if (fd < 0) {
+ perror(file);
+ exit(1);
+ }
+
+ n = read(fd, &head, sizeof(head));
+ if (n < sizeof(head)) {
+ printf("%s: reading header\n", file);
+ exit(1);
+ }
+
+ if (N_BADMAG(head)) {
+ printf("%s: bad magic number\n");
+ exit(1);
+ }
+
+#ifdef DEBUG
+ printf(" text: %9d\n", head.a_text);
+ printf(" data: %9d\n", head.a_data);
+ printf(" bss: %9d\n", head.a_bss);
+ printf(" syms: %9d\n", head.a_syms);
+ printf("entry: 0x%08X\n", head.a_entry);
+ printf("trsiz: %9d\n", head.a_trsize);
+ printf("drsiz: %9d\n", head.a_drsize);
+#endif
+
+ if (head.a_syms <= 0) {
+ printf("%s: no symbols\n", file);
+ exit(1);
+ }
+ if (head.a_trsize ||
+ head.a_drsize)
+ {
+ printf("%s: has relocations\n");
+ exit(1);
+ }
+
+ find_rd_root_image(file);
+
+ /*
+ * Map in the whole data segment.
+ * The file offset needs to be page aligned.
+ */
+ data_off = N_DATOFF(head);
+ data_len = head.a_data;
+ /* align... */
+ data_pgoff = N_PAGSIZ(head) - 1;
+ data_pgoff &= data_off;
+ data_off -= data_pgoff;
+ data_len += data_pgoff;
+ /* map in in... */
+ dataseg = mmap(NULL, /* any address is ok */
+ data_len, /* length */
+ PROT_READ | PROT_WRITE,
+ MAP_SHARED,
+ fd, data_off);
+ if ((long)dataseg == -1) {
+ printf("%s: can not map data seg\n", file);
+ perror(file);
+ exit(1);
+ }
+ dataseg += data_pgoff;
+
+ /*
+ * Find value in the location: rd_root_size
+ */
+ ip = (int*) (dataseg + rd_root_size_off);
+ rd_root_size_val = *ip;
+#ifdef DEBUG
+ printf("rd_root_size val: 0x%08X (%d blocks)\n",
+ rd_root_size_val, (rd_root_size_val >> 9));
+#endif
+
+ /*
+ * Copy the symbol table and string table.
+ */
+#ifdef DEBUG
+ printf("copying root image...\n");
+#endif
+ n = read(0, dataseg + rd_root_image_off,
+ rd_root_size_val);
+ if (n < 0) {
+ perror("read");
+ exit(1);
+ }
+
+ msync(dataseg - data_pgoff, data_len
+#ifdef sun
+ ,0
+#endif
+ );
+
+#ifdef DEBUG
+ printf("...copied %d bytes\n", n);
+#endif
+ close(fd);
+ exit(0);
+}
+
+
+/*
+ * Find locations of the symbols to patch.
+ */
+struct nlist wantsyms[] = {
+ { "_rd_root_size", 0 },
+ { "_rd_root_image", 0 },
+ { NULL, 0 },
+};
+
+find_rd_root_image(file)
+ char *file;
+{
+ int data_va;
+ int std_entry;
+
+ if (nlist(file, wantsyms)) {
+ printf("%s: no rd_root_image symbols?\n", file);
+ exit(1);
+ }
+ std_entry = N_TXTADDR(head) +
+ (head.a_entry & (N_PAGSIZ(head)-1));
+ data_va = N_DATADDR(head);
+ if (head.a_entry != std_entry) {
+ printf("%s: warning: non-standard entry point: 0x%08x\n",
+ file, head.a_entry);
+ printf("\texpecting entry=0x%X\n", std_entry);
+ data_va += (head.a_entry - std_entry);
+ }
+
+ rd_root_size_off = wantsyms[0].n_value - data_va;
+ rd_root_image_off = wantsyms[1].n_value - data_va;
+#ifdef DEBUG
+ printf(".data segment va: 0x%08X\n", data_va);
+ printf("rd_root_size va: 0x%08X\n", wantsyms[0].n_value);
+ printf("rd_root_image va: 0x%08X\n", wantsyms[1].n_value);
+ printf("rd_root_size off: 0x%08X\n", rd_root_size_off);
+ printf("rd_root_image off: 0x%08X\n", rd_root_image_off);
+#endif
+
+ /*
+ * Sanity check locations of db_* symbols
+ */
+ if (rd_root_image_off < 0 || rd_root_image_off >= head.a_data) {
+ printf("%s: rd_root_image not in data segment?\n", file);
+ exit(1);
+ }
+ if (rd_root_size_off < 0 || rd_root_size_off >= head.a_data) {
+ printf("%s: rd_root_size not in data segment?\n", file);
+ exit(1);
+ }
+}
--- /dev/null
+# Copyright (c) 1980, 1985, 1989 The Regents of the University of California.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+# must display the following acknowledgement:
+# This product includes software developed by the University of
+# California, Berkeley and its contributors.
+# 4. Neither the name of the University nor the names of its contributors
+# may be used to endorse or promote products derived from this software
+# without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+# SUCH DAMAGE.
+#
+# @(#)termcap.src 5.109 (Berkeley) 3/8/93
+#
+pc3|ibmpc3|IBM PC 386BSD Console:\
+ :DO=\E[%dB:K1=\E[H:K2=\E[E:K3=\E[I:K4=\E[F:K5=\E[G:LE=\E[%dD:\
+ :RI=\E[%dC:UP=\E[%dA:am:bl=^G:bs:cb=\E[1K:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
+ :cm=\E[%i%d;%dH:co#80:cr=^M:do=^J:ho=\E[H:is=\E[m:k0=\E[V:k1=\E[M:\
+ :k2=\E[N:k3=\E[O:k4=\E[P:k5=\E[Q:k6=\E[R:k7=\E[S:k8=\E[T:k9=\E[U:\
+ :kD=\177:kH=\E[F:kN=\E[G:kP=\E[I:kb=\177:kd=\E[B:kh=\E[H:kl=\E[D:\
+ :kr=\E[C:ku=\E[A:le=^H:li#25:ms:nd=\E[C:rs=\E[m\E[x\E[14r:se=\E[m:\
+ :sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:te=\E[m:ti=\E[m:up=\E[A:km:pt:\
+ :AL=\E[%dL:DL=\E[%dM:SF=\E[%dS:SR=\E[%dT:al=\E[L:dl=\E[M:
+++ /dev/null
-# $Id: Makefile.inc,v 1.13 1997/01/25 09:16:39 deraadt Exp $
-
-# TOP is assumed to be defined by Makefile including this one.
-
-CBIN= instbin
-COMMONDIR= ${TOP}/inst-common
-
-MOUNT_POINT?= /mnt
-VND?= vnd0
-VND_DEV= /dev/${VND}a
-VND_RDEV= /dev/r${VND}a
-IMAGE?= xxx${REV}.fs
-PID!= echo $$$$
-REALIMAGE= /tmp/image.${PID}
-MDEC= ${DESTDIR}/usr/mdec
-
-LISTS= ${COMMONDIR}/list ${.CURDIR}/list
-.if defined(KERBEROS)
-CRUNCHCONF= ${COMMONDIR}/${CBIN}-krb.conf
-.else
-CRUNCHCONF= ${COMMONDIR}/${CBIN}.conf
-.endif
-MTREE= ${COMMONDIR}/mtree.conf
-
-all: ${CBIN}
-.ifndef FLOPPY3
- dd if=/dev/zero of=${REALIMAGE} bs=10k count=120
- vnconfig -v -c ${VND} ${REALIMAGE}
- disklabel -w -B -b /usr/mdec/fdboot -s /usr/mdec/bootfd ${VND} floppy5
- newfs -O -m 0 -o space -i 3000 -c 80 ${VND_RDEV} floppy5
-.else
- dd if=/dev/zero of=${REALIMAGE} bs=10k count=144
- vnconfig -v -c ${VND} ${REALIMAGE}
- disklabel -w -B -b /usr/mdec/fdboot -s /usr/mdec/bootfd ${VND} floppy3
- newfs -O -m 0 -o space -i 3000 -c 80 ${VND_RDEV} floppy3
-.endif
- mount ${VND_DEV} ${MOUNT_POINT}
- mtree -def ${MTREE} -p ${MOUNT_POINT}/ -u
- TOPDIR=${TOP} CURDIR=${.CURDIR} OBJDIR=${.OBJDIR} \
- TARGDIR=${MOUNT_POINT} sh ${TOP}/runlist.sh ${LISTS}
- @echo ""
- @df -i ${MOUNT_POINT}
- @echo ""
- umount ${MOUNT_POINT}
- vnconfig -u ${VND}
- cat /*bin/* > /dev/null
- cp ${REALIMAGE} ${IMAGE}
- rm ${REALIMAGE}
-
-unconfig:
- -umount -f ${MOUNT_POINT}
- -vnconfig -u ${VND}
- -/bin/rm -f ${IMAGE}
-
-${CBIN}.mk ${CBIN}.cache ${CBIN}.c: ${CRUNCHCONF}
- crunchgen -D ${TOP}/../../.. -m ${CBIN}.mk -L ${DESTDIR}/usr/lib \
- ${CRUNCHCONF}
-
-${CBIN}: ${CBIN}.mk ${CBIN}.cache ${CBIN}.c
- make -f ${CBIN}.mk all
-.if defined(KERBEROS)
- mv ${CBIN}-krb ${CBIN}
-.endif
-
-install:
- cp ${IMAGE} ${DESTDIR}/snapshot/
-
-clean cleandir:
- /bin/rm -f *.core ${IMAGE} ${CBIN} ${CBIN}.mk \
- ${CBIN}.cache *.o *.lo *.c
-
-.include <bsd.obj.mk>
-.include <bsd.subdir.mk>
+++ /dev/null
-# $OpenBSD: dot.commonutils,v 1.7 1996/12/09 07:05:02 deraadt Exp $
-#
-# Copyright (c) 1994 Christopher G. Demetriou
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-# must display the following acknowledgement:
-# This product includes software developed by Christopher G. Demetriou.
-# 4. The name of the author may not be used to endorse or promote products
-# derived from this software without specific prior written permission
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# Installation utilites (functions), to get OpenBSD installed on
-# the hard disk. These are meant to be invoked from the shell prompt,
-# by people installing OpenBSD.
-
-# we know that /etc/fstab is only generated on the hard drive
-dest_dir=/
-if [ ! -f /etc/fstab ]; then
- dest_dir=/mnt/
-fi
-
-# counter for possible shared library confusion
-TAR=/bin/tar
-GUNZIP="/usr/bin/gzip -d"
-
-Set_tmp_dir()
-{
- def_tmp_dir=`pwd`
- if [ "$def_tmp_dir" = "/" -o "$def_tmp_dir" = "/mnt" ]; then
- def_tmp_dir="$dest_dir"usr/distrib
- fi
-
- echo -n "What directory should be used to find and/or store "
- echo "installtion"
- echo -n "files? [$def_tmp_dir] "
- read tmp_dir
- if [ "$tmp_dir" = "" ]; then
- tmp_dir=$def_tmp_dir
- fi
- if [ ! -d "$tmp_dir" ]; then
- /bin/rm -rf $tmp_dir
- mkdir -p $tmp_dir
- fi
-}
-
-Tmp_dir()
-{
- if [ "$tmp_dir" = "" ]; then
- Set_tmp_dir
- fi
- cd $tmp_dir
-}
-
-Load_fd()
-{
- Tmp_dir
- which=
- echo "Don't forget that you can't load from the drive you booted from."
- echo ""
-
- while [ "$which" != "0" -a "$which" != "1" ]; do
- echo -n "Read from which floppy drive ('0' or '1')? [1] "
- read which
- if [ "X$which" = "X" ]; then
- which=1
- fi
- done
- echo ""
- echo "WARNING: during the floppy loading process, you should only"
- echo "use Control-C at the prompt."
- echo ""
- while echo -n \
- "Insert floppy (hit Control-C to terminate, enter to load): "
- do
- read foo
- mount -r -t msdos /dev/fd${which}a /mnt2
- cp -rp /mnt2/* .
- umount /mnt2
- done
-}
-
-Load_tape()
-{
- Tmp_dir
- echo -n "Which tape drive will you be using? [rst0] "
- read which
- if [ "X$which" = "X" ]; then
- which=rst0
- fi
- echo -n "Insert the tape into the tape drive and hit return to "
- echo -n "continue..."
- read foo
- echo "Extracting files from the tape..."
- $TAR -xvpf /dev/$which
- echo "Done."
-}
-
-Extract()
-{
- Tmp_dir
- echo -n "Would you like to list the files as they're extracted? [n] "
- read verbose
- case $verbose in
- y*|Y*)
- tarverbose=v
- ;;
- *)
- tarverbose=
- ;;
- esac
- cat "$1"* | $GUNZIP | (cd $dest_dir ; $TAR -xp"$tarverbose"f - )
-}
+++ /dev/null
-# $OpenBSD: instbin-krb.conf,v 1.3 1997/02/09 16:48:12 deraadt Exp $
-#
-# instbin.conf - unified binary for the inst/upgr floppies
-#
-
-srcdirs bin sbin usr.bin/less usr.bin usr.sbin gnu/usr.bin
-
-progs awk bad144 cat chmod chown chroot cp dd df disklabel ed expr fsck_ffs
-progs ftp fdisk
-progs ifconfig init less ln ls mkdir mknod mount mount_cd9660
-progs mount_ffs mount_msdos mount_nfs mount_kernfs
-progs mv newfs pax pdksh ping pwd reboot rm route
-progs sed shutdown slattach strings stty sync test tip umount
-progs rsh restore gzip
-
-ln chown chgrp
-ln fsck_ffs fsck
-ln less more
-ln pax tar
-ln pdksh sh
-ln pdksh -sh # init invokes the shell this way
-ln test [
-ln reboot halt
-
-libs -ledit -lutil -ltermcap -lkrb -ldes -ll -lm
+++ /dev/null
-# $OpenBSD: instbin.conf,v 1.16 1997/02/09 16:48:14 deraadt Exp $
-#
-# instbin.conf - unified binary for the inst/upgr floppies
-#
-
-srcdirs bin sbin usr.bin/less usr.bin usr.sbin gnu/usr.bin
-
-progs awk bad144 cat chmod chown chroot cp dd df disklabel ed expr fsck_ffs
-progs ftp fdisk
-progs ifconfig init less ln ls mkdir mknod mount mount_cd9660
-progs mount_ffs mount_msdos mount_nfs mount_kernfs
-progs mv newfs pax pdksh ping pwd reboot rm route
-progs sed shutdown slattach strings stty sync test tip umount
-progs rsh restore gzip
-
-ln chown chgrp
-ln fsck_ffs fsck
-ln less more
-ln pax tar
-ln pdksh sh
-ln pdksh -sh # init invokes the shell this way
-ln test [
-ln reboot halt
-
-libs -ledit -lutil -ltermcap -ll -lm
+++ /dev/null
-# $Id: list,v 1.12 1997/03/21 03:33:23 kstailey Exp $
-
-# copy the crunched binary, link to it, and kill it
-COPY ${OBJDIR}/instbin instbin
-LINK instbin bin/cat
-LINK instbin bin/chmod
-LINK instbin bin/cp
-LINK instbin bin/cpio
-LINK instbin bin/dd
-LINK instbin bin/df
-LINK instbin bin/ed
-LINK instbin bin/expr
-LINK instbin bin/ln
-LINK instbin bin/ls
-LINK instbin bin/mkdir
-LINK instbin bin/mv
-LINK instbin bin/pwd
-LINK instbin bin/rm
-LINK instbin bin/sh
-LINK instbin bin/stty
-LINK instbin bin/sync
-LINK instbin bin/tar
-LINK instbin bin/test
-LINK instbin bin/[
-LINK instbin sbin/disklabel
-LINK instbin sbin/fdisk
-LINK instbin sbin/fsck
-LINK instbin sbin/fsck_ffs
-LINK instbin sbin/halt
-LINK instbin sbin/ifconfig
-LINK instbin sbin/init
-LINK instbin sbin/mknod
-LINK instbin sbin/mount
-LINK instbin sbin/mount_cd9660
-LINK instbin sbin/mount_ffs
-LINK instbin sbin/mount_msdos
-LINK instbin sbin/mount_nfs
-LINK instbin sbin/mount_kernfs
-LINK instbin sbin/newfs
-LINK instbin sbin/ping
-LINK instbin sbin/restore
-LINK instbin sbin/reboot
-LINK instbin sbin/route
-LINK instbin sbin/shutdown
-LINK instbin sbin/slattach
-LINK instbin sbin/umount
-SYMLINK /bin/cat usr/bin/awk
-SYMLINK /bin/cat usr/bin/chgrp
-SYMLINK /bin/cat usr/bin/ftp
-SYMLINK /bin/cat usr/bin/gzip
-SYMLINK /bin/cat usr/bin/gunzip
-SYMLINK /bin/cat usr/bin/less
-SYMLINK /bin/cat usr/bin/more
-SYMLINK /bin/cat usr/bin/rsh
-SYMLINK /bin/cat usr/bin/sed
-SYMLINK /bin/cat usr/bin/strings
-SYMLINK /bin/cat usr/bin/tip
-SYMLINK /bin/cat usr/sbin/bad144
-SYMLINK /bin/cat usr/sbin/chown
-SYMLINK /bin/cat usr/sbin/chroot
-SPECIAL /bin/rm instbin
-
-# copy the MAKEDEV script and make some devices
-COPY ${DESTDIR}/dev/MAKEDEV dev/MAKEDEV
-SPECIAL cd dev; sh MAKEDEV floppy
-SPECIAL /bin/rm dev/MAKEDEV
-
-# we need the contents of /usr/mdec
-COPYDIR ${DESTDIR}/usr/mdec usr/mdec
-
-# various files that we need in /etc for the install
-COPY ${DESTDIR}/etc/group etc/group
-COPY ${DESTDIR}/etc/master.passwd etc/master.passwd
-COPY ${DESTDIR}/etc/passwd etc/passwd
-COPY ${DESTDIR}/etc/protocols etc/protocols
-COPY ${DESTDIR}/etc/pwd.db etc/pwd.db
-COPY ${DESTDIR}/etc/services etc/services
-COPY ${DESTDIR}/etc/spwd.db etc/spwd.db
-
-# and the common installation tools
-COPY ${TOPDIR}/inst-common/dot.commonutils .commonutils
-COPY ${TOPDIR}/inst-common/termcap.pc3 usr/share/misc/termcap
+++ /dev/null
-# $Id: mtree.conf,v 1.4 1996/09/23 09:18:29 deraadt Exp $
-
-/set type=dir uname=root gname=wheel mode=0755
-# .
-.
-
-# ./bin
-bin
-# ./bin
-..
-
-# ./dev
-dev
-# ./dev
-..
-
-# ./etc
-etc
-# ./etc
-..
-
-# ./mnt
-mnt
-# ./mnt
-..
-
-# ./mnt2
-mnt2
-# ./mnt2
-..
-
-# ./kern
-kern
-# ./kern
-..
-
-# ./sbin
-sbin
-# ./sbin
-..
-
-# ./tmp
-tmp mode=01777
-# ./tmp
-..
-
-# ./usr
-usr
-
-# ./usr/bin
-bin
-# ./usr/bin
-..
-
-# ./usr/mdec
-mdec
-# ./usr/mdec
-..
-
-# ./usr/sbin
-sbin
-# ./usr/sbin
-..
-
-# ./usr/share
-share
-
-# ./usr/share/misc
-misc
-# ./usr/share/misc
-..
-
-# ./usr/share
-..
-
-# ./usr
-..
+++ /dev/null
-# Copyright (c) 1980, 1985, 1989 The Regents of the University of California.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-# must display the following acknowledgement:
-# This product includes software developed by the University of
-# California, Berkeley and its contributors.
-# 4. Neither the name of the University nor the names of its contributors
-# may be used to endorse or promote products derived from this software
-# without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-# SUCH DAMAGE.
-#
-# @(#)termcap.src 5.109 (Berkeley) 3/8/93
-#
-pc3|ibmpc3|IBM PC 386BSD Console:\
- :DO=\E[%dB:K1=\E[H:K2=\E[E:K3=\E[I:K4=\E[F:K5=\E[G:LE=\E[%dD:\
- :RI=\E[%dC:UP=\E[%dA:am:bl=^G:bs:cb=\E[1K:cd=\E[J:ce=\E[K:cl=\E[H\E[J:\
- :cm=\E[%i%d;%dH:co#80:cr=^M:do=^J:ho=\E[H:is=\E[m:k0=\E[V:k1=\E[M:\
- :k2=\E[N:k3=\E[O:k4=\E[P:k5=\E[Q:k6=\E[R:k7=\E[S:k8=\E[T:k9=\E[U:\
- :kD=\177:kH=\E[F:kN=\E[G:kP=\E[I:kb=\177:kd=\E[B:kh=\E[H:kl=\E[D:\
- :kr=\E[C:ku=\E[A:le=^H:li#25:ms:nd=\E[C:rs=\E[m\E[x\E[14r:se=\E[m:\
- :sf=\E[S:so=\E[7m:sr=\E[T:ta=^I:te=\E[m:ti=\E[m:up=\E[A:km:pt:\
- :AL=\E[%dL:DL=\E[%dM:SF=\E[%dS:SR=\E[%dT:al=\E[L:dl=\E[M:
-# $Id: Makefile,v 1.2 1996/09/21 07:03:13 deraadt Exp $
+# $Id: Makefile,v 1.3 1997/04/13 17:17:47 mickey Exp $
TOP= ${.CURDIR}/..
.include "${TOP}/Makefile.inc"
IMAGE= inst${REV}.fs
-.include "${TOP}/inst-common/Makefile.inc"
+.include "${TOP}/common/Makefile.inc"
--- /dev/null
+# $OpenBSD: Makefile,v 1.1 1997/04/13 17:17:52 mickey Exp $
+# $NetBSD: Makefile,v 1.1 1995/07/18 04:13:06 briggs Exp $
+
+TOP= ${.CURDIR}/..
+
+.include "${TOP}/Makefile.inc"
+IMAGE= miniroot-${REV}.fs
+CRUNCHCONF?= ${.CURDIR}/${CBIN}.conf
+BASE=miniroot
+
+MOUNT_POINT= /mnt1
+BDEV= /dev/rd0a
+CDEV= /dev/rrd0a
+RDEV= /dev/rd0c
+
+KERNEL= /sys/arch/i386/compile/RAMDISK/bsd
+
+all: ${CBIN} ${IMAGE}
+ @echo "all done"
+
+.include "Makefile.inc"
+
+DISKTYPE= rdroot
+NBLKS= 4046
+# old format, minfree, opt, b/i trks, sects, cpg
+NEWFSARGS= -t ffs -m 0 -o space -c 16 -i 4096
+
+${IMAGE}: do_prep do_mount do_files do_umount_copy do_unconfig
+ mv -f ${IMAGE}.tmp ${IMAGE}
+ -if [ -e ${.CURDIR}/${__objdir}/rd.pid ] ; then \
+ kill `cat ${.CURDIR}/${__objdir}/rd.pid`; \
+ rm ${.CURDIR}/${__objdir}/rd.pid;\
+ fi
+
+rdsetroot: ${TOP}/common/rdsetroot.c
+ ${HOSTCC} -DDEBUG -o rdsetroot ${TOP}/common/rdsetroot.c
+
+setroot: ${IMAGE} bsd
+ ${.CURDIR}/${__objdir}/rdsetroot bsd < ${IMAGE}
+
+bsd: ${KERNEL}
+ cp ${KERNEL} bsd
+
+writetape:
+ echo rewinding tape < /dev/rst0
+ buffer -i /usr/mdec/stboot -o /dev/nrst0
+ buffer -i /usr/mdec/bootst -o /dev/nrst0
+ buffer -B -p75 -i bsd -o /dev/nrst0
+ echo rewinding tape < /dev/rst0
+
+
+do_prep: ${CBIN} do_unconfig
+ sh ${.CURDIR}/start_rdconfig.sh ${RDEV} ${NBLKS}
+ disklabel -w -r ${RDEV} ${DISKTYPE}
+
+do_mount:
+ -newfs ${NEWFSARGS} -s ${NBLKS} ${CDEV} ${DISKTYPE}
+ mount ${BDEV} ${MOUNT_POINT}
+
+do_umount_copy:
+ @echo ""
+ @df -i ${MOUNT_POINT}
+ @echo ""
+ -umount ${MOUNT_POINT}
+ dd if=${CDEV} of=${IMAGE}.tmp bs=4b count=`expr ${NBLKS} / 4 `
+
+do_unconfig:
+ -umount ${MOUNT_POINT}
+ -if [ -e ${.CURDIR}/${__objdir}/rd.pid ] ; then \
+ kill `cat ${.CURDIR}/${__objdir}/rd.pid`; \
+ rm ${.CURDIR}/${__objdir}/rd.pid; \
+ fi
+
+
+.PRECIOUS: ${IMAGE}
+
+
--- /dev/null
+#
+# $OpenBSD: Makefile.inc,v 1.1 1997/04/13 17:17:52 mickey Exp $
+# $NetBSD: Makefile.inc,v 1.1 1995/07/18 04:13:14 briggs Exp $
+#
+
+# TOP is assumed to be defined by Makefile including this one.
+
+CBIN?= raminst
+COMMONDIR= ${TOP}/ramdisk
+
+MOUNT_POINT?= ${TOP}/${BASE}/fs
+
+LISTS= ${COMMONDIR}/../common/list ${.CURDIR}/list
+CRUNCHCONF?= ${COMMONDIR}/${CBIN}.conf
+MTREE= ${COMMONDIR}/mtree.conf
+
+${CBIN}.mk ${CBIN}.cache ${CBIN}.c: ${CRUNCHCONF}
+ crunchgen -D ${BSDSRCDIR} -L ${DESTDIR}/usr/lib ${CRUNCHCONF}
+
+${CBIN}: ${CBIN}.mk ${CBIN}.cache ${CBIN}.c
+ make -f ${CBIN}.mk all
+
+do_files:
+ mtree -def ${MTREE} -p ${MOUNT_POINT}/ -u
+ TOPDIR=${TOP} CURDIR=${.CURDIR} OBJDIR=${.OBJDIR} \
+ TARGDIR=${MOUNT_POINT} sh ${TOP}/runlist.sh ${LISTS}
+
+clean cleandir:
+ /bin/rm -f core ${IMAGE} ${CBIN} ${CBIN}.mk ${CBIN}.cache *.o *.lo *.c
+
+.include <bsd.obj.mk>
+.include <bsd.subdir.mk>
--- /dev/null
+# Disk geometry and partition layout tables.
+# Key:
+# dt controller type
+# ty type of disk (fixed, removeable, simulated)
+# d[0-4] drive-type-dependent parameters
+# ns #sectors/track
+# nt #tracks/cylinder
+# nc #cylinders/disk
+# sc #sectors/cylinder, nc*nt default
+# su #sectors/unit, sc*nc default
+# se sector size, DEV_BSIZE default
+# rm rpm, 3600 default
+# sf supports bad144-style bad sector forwarding
+# sk sector skew per track, default 0
+# cs sector skew per cylinder, default 0
+# hs headswitch time, default 0
+# ts one-cylinder seek time, default 0
+# il sector interleave (n:1), 1 default
+# bs boot block size, default BBSIZE
+# sb superblock size, default SBSIZE
+# o[a-h] partition offsets in sectors
+# p[a-h] partition sizes in sectors
+# b[a-h] partition block sizes in bytes
+# f[a-h] partition fragment sizes in bytes
+# t[a-h] partition types (filesystem, swap, etc)
+#
+# All partition sizes reserve space for bad sector tables.
+# (5 cylinders needed for maintenance + replacement sectors)
+#
--- /dev/null
+# $OpenBSD: dot.hdprofile,v 1.1 1997/04/13 17:17:53 mickey Exp $
+#
+# Copyright (c) 1994 Christopher G. Demetriou
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+# must display the following acknowledgement:
+# This product includes software developed by Christopher G. Demetriou.
+# 4. The name of the author may not be used to endorse or promote products
+# derived from this software without specific prior written permission
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PATH=/sbin:/bin:/usr/bin:/usr/sbin:/
+export PATH
+TERM=pc3
+export TERM
+
+umask 022
+
+if [ "X${DONEPROFILE}" = "X" ]; then
+ DONEPROFILE=YES
+
+ echo "Checking filesystems..."
+ fsck -y
+
+ echo "Mounting filesystems..."
+ mount -a
+ mount -t kernfs /kern /kern
+
+ # set up some sane defaults
+ echo 'erase ^?, werase ^W, kill ^U, intr ^C'
+ stty newcrt werase ^W intr ^C kill ^U erase ^? 9600
+ echo ''
+
+ # pull in the functions that people will use from the shell prompt.
+ . /.commonutils
+ . /.instutils
+
+ echo "Follow the installation directions to install the OpenBSD"
+ echo "distribution sets."
+fi
--- /dev/null
+# $OpenBSD: dot.instutils,v 1.1 1997/04/13 17:17:53 mickey Exp $
+#
+# Copyright (c) 1994 Christopher G. Demetriou
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+# must display the following acknowledgement:
+# This product includes software developed by Christopher G. Demetriou.
+# 4. The name of the author may not be used to endorse or promote products
+# derived from this software without specific prior written permission
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Installation configuration utilites (functions), to get OpenBSD configured
+# reasonably once it is installed on the hard disk. These are meant to be
+# invoked from the shell prompt, by people installing OpenBSD.
+
+Configure()
+{
+ DEV=/dev
+ ETC=/etc
+ if [ ! -f /etc/fstab ]; then
+ DEV=/mnt/dev
+ ETC=/mnt/etc
+ fi
+
+ echo "You will now be prompted for information about this"
+ echo "machine. If you hit return, the default answer (in"
+ echo "brackets) will be used."
+
+ echo ""
+ echo -n "What is this machine's hostname? [unknown.host.domain] "
+ read hname
+ if [ "$hname" = "" ]; then
+ hname=unknown.host.domain
+ fi
+ echo $hname > ${ETC}/myname
+ proto_domain=`echo $hname | sed -e 's/[^.]*\.//'`
+
+ echo ""
+ echo "What domain is this machine in (this is NOT its YP"
+ echo -n "domain name)? [$proto_domain] "
+ read dname
+ if [ "$dname" = "" ]; then
+ dname=$proto_domain
+ fi
+
+ echo "\a"
+ if [ -e $ETC/sendmail.cf ]; then
+ echo "WARNING: A default sendmail.cf exists, and probably"
+ echo "needs to be tuned and/or replaced, to work properly at"
+ echo "your site!"
+ else
+ echo "WARNING: No default sendmail.cf installed. Did you"
+ echo "forget to install the 'etc' distribution?"
+ fi
+
+ echo "127.0.0.1 localhost localhost.$dname" > ${ETC}/hosts
+
+ echo ""
+ echo -n "Does this machine have an ethernet interface? [y] "
+ read resp
+ case "$resp" in
+ n*)
+ ;;
+ *)
+ intf=
+ while [ "$intf" = "" ]; do
+ echo -n "What is the primary interface name "
+ echo -n "(e.g. ed0, ep0, etc)? "
+ read intf
+ done
+ echo -n "What is the hostname for this interface? [$hname] "
+ read ifname
+ if [ "$ifname" = "" ]; then
+ ifname=$hname
+ fi
+ ifaddr=
+ while [ "$ifaddr" = "" ]; do
+ echo -n "What is the IP address associated with "
+ echo -n "interface ${intf}? "
+ read ifaddr
+ done
+ echo "$ifaddr $ifname `echo $ifname | sed -e s/\.$dname//`" \
+ >> ${ETC}/hosts
+
+ echo -n "Does this interface have a special netmask? [n] "
+ read resp
+ case "$resp" in
+ y*)
+ echo -n "What is the netmask? [0xffffff00] "
+ read ifnetmask
+ if [ "$ifnetmask" = "" ]; then
+ ifnetmask=0xffffff00
+ fi
+ ;;
+ *)
+ ifnetmask=
+ ;;
+ esac
+
+ echo -n "Does this interface need additional flags? [n] "
+ read resp
+ case "$resp" in
+ y*)
+ echo -n "What flags? [link0] "
+ read ifflags
+ if [ "$ifflags" = "" ]; then
+ ifflags=link0
+ fi
+ ;;
+ *)
+ ifflags=
+ ;;
+ esac
+ echo "inet $ifname $ifnetmask $ifflags" > ${ETC}/hostname.$intf
+
+ echo "\a"
+ echo -n "WARNING: if you have any more ethernet interfaces, "
+ echo "you will have to configure"
+ echo -n "them by hand. Read the comments in /etc/netstart to "
+ echo "learn how to do this."
+ ;;
+ esac
+
+ echo ""
+ echo -n "Making device nodes (may take a while)..."
+ cd ${DEV}
+ sh MAKEDEV all
+ echo " done."
+
+ sync
+
+ echo ""
+ echo "If you haven't already installed a kernel on the hard drive"
+ echo "using your kernel-copy floppy, do so now. Kernel"
+ echo "installation instructions can be found in the"
+ echo "installation notes."
+}
--- /dev/null
+#
+# Copyright (c) 1994 Christopher G. Demetriou
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+# must display the following acknowledgement:
+# This product includes software developed by Christopher G. Demetriou.
+# 4. The name of the author may not be used to endorse or promote products
+# derived from this software without specific prior written permission
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# $Id: dot.profile,v 1.1 1997/04/13 17:17:54 mickey Exp $
+
+PATH=/sbin:/bin:/usr/bin:/usr/sbin:/
+export PATH
+TERM=pc3
+export TERM
+
+umask 022
+
+if [ "X${DONEPROFILE}" = "X" ]; then
+ DONEPROFILE=YES
+
+ # set up some sane defaults
+ echo 'erase ^?, werase ^W, kill ^U, intr ^C'
+ stty newcrt werase ^W intr ^C kill ^U erase ^? 9600
+ echo ''
+
+ # mount the kern_fs so that we can examine the dmesg state
+ mount -t kernfs /kern /kern
+
+ # pull in the functions that people will use from the shell prompt.
+ . /.commonutils
+ . /.instutils
+
+ # run the installation script.
+ install
+fi
--- /dev/null
+#!/bin/sh
+# $OpenBSD: install.md,v 1.1 1997/04/13 17:17:54 mickey Exp $
+#
+# Copyright (c) 1994 Christopher G. Demetriou
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+# must display the following acknowledgement:
+# This product includes software developed by Christopher G. Demetriou.
+# 4. The name of the author may not be used to endorse or promote products
+# derived from this software without specific prior written permission
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# OpenBSD installation script.
+# In a perfect world, this would be a nice C program, with a reasonable
+# user interface.
+
+DT=/etc/disktab # /etc/disktab
+FSTABDIR=/mnt/etc # /mnt/etc
+#DONTDOIT=echo
+
+VERSION=2.0
+FSTAB=${FSTABDIR}/fstab
+
+getresp() {
+ read resp
+ if [ "X$resp" = "X" ]; then
+ resp=$1
+ fi
+}
+
+echo "Welcome to the OpenBSD ${VERSION} installation program."
+echo ""
+echo "This program is will put OpenBSD on your hard disk. It is not"
+echo "painless, but it could be worse. You'll be asked several questions,"
+echo "and it would probably be useful to have your disk's hardware"
+echo "manual, the installation notes, and a calculator handy."
+echo ""
+echo "In particular, you will need to know some reasonably detailed"
+echo "information about your disk's geometry, because there is currently"
+echo "no way this this program can figure that information out."
+echo ""
+echo "As with anything which modifies your hard drive's contents, this"
+echo "program can cause SIGNIFICANT data loss, and you are advised"
+echo "to make sure your hard drive is backed up before beginning the"
+echo "installation process."
+echo ""
+echo "Default answers are displyed in brackets after the questions."
+echo "You can hit Control-C at any time to quit, but if you do so at a"
+echo "prompt, you may have to hit return. Also, quitting in the middle of"
+echo "installation may leave your system in an inconsistent state."
+echo ""
+echo -n "Proceed with installation? [n] "
+getresp "n"
+case "$resp" in
+y*|Y*)
+ echo "Cool! Let's get to it..."
+ ;;
+*)
+ echo "OK, then. Enter 'halt' at the prompt to halt the"
+ echo "machine. Once the machine has halted, remove the"
+ echo "floppy and press any key to reboot."
+ exit
+ ;;
+esac
+
+echo ""
+echo "To do the installation, you'll need to provide some information about"
+echo "your disk."
+
+echo "OpenBSD can be installed on ST506, ESDI, IDE, or SCSI disks."
+echo -n "What kind of disk will you be installing on? [SCSI] "
+getresp "SCSI"
+case "$resp" in
+esdi|ESDI|st506|ST506)
+ drivetype=wd
+ echo -n "Does it support _automatic_ sector remapping? [y] "
+ getresp "y"
+ case "$resp" in
+ n*|N*)
+ sect_fwd="sf:"
+ ;;
+ *)
+ sect_fwd=""
+ ;;
+ esac
+;;
+ide|IDE)
+ drivetype=wd
+ sect_fwd=""
+ type=ST506
+ ;;
+scsi|SCSI)
+ drivetype=sd
+ sect_fwd=""
+ type=SCSI
+ ;;
+esac
+
+# find out what units are possible for that disk, and query the user.
+driveunits=`ls /dev/${drivetype}?a | sed -e 's,/dev/\(...\)a,\1,g'`
+if [ "X${driveunits}" = "X" ]; then
+ echo "FATAL ERROR:"
+ echo "No devices for disks of type '${drivetype}'."
+ echo "This is probably a bug in the install disks."
+ echo "Exiting install program."
+ exit
+fi
+prefdrive=${drivetype}0
+
+echo "The following ${drivetype}-type disks are supported by this"
+echo "installation procedure:"
+echo "${driveunits}"
+echo "Note that they may not exist in _your_ machine; the list of"
+echo "disks in your machine was printed when the system was booting."
+while [ "X${drivename}" = "X" ]; do
+ echo -n "Which disk would like to install on? [${prefdrive}] "
+ getresp ${prefdrive}
+ otherdrives=`echo "${driveunits}" | sed -e s,${resp},,`
+ if [ "X${driveunits}" = "X${otherdrives}" ]; then
+ echo "\"${resp}\" is an invalid drive name. Valid choices"
+ echo "are: "${driveunits}
+ else
+ drivename=${resp}
+ fi
+done
+
+echo ""
+echo "Using disk ${drivename}."
+echo -n "What kind of disk is it? (one word please) [my${drivetype}] "
+getresp "my${drivetype}"
+labelname=$resp
+
+echo ""
+echo "You will now need to provide some information about your disk's"
+echo "geometry. This should either be in the User's Manual for your disk,"
+echo "or you should have written down what OpenBSD printed when booting."
+echo "(Note that he geometry that's printed at boot time is preferred.)"
+echo ""
+echo "You may choose to view the initial boot messages for your system"
+echo "again right now if you like."
+echo -n "View the boot messages again? [n] "
+getresp "n"
+case "$resp" in
+y*|Y*)
+ less -rsS /kern/msgbuf
+ ;;
+*)
+ echo ""
+ ;;
+esac
+
+echo "You will now enter the disk geometry information"
+echo ""
+
+bytes_per_sect=`cat /kern/msgbuf \
+ | sed -n -e /^${drivename}:/p -e /^${drivename}:/q \
+ | sed 's/\([^ ]*[ ]*\)\{8\}\([^ ]*\).*$/\2/'`
+echo -n "Number of bytes per disk sector? [$bytes_per_sect] "
+getresp $bytes_per_sect
+bytes_per_sect="$resp"
+
+cyls_per_disk=`cat /kern/msgbuf \
+ | sed -n -e /^${drivename}:/p -e /^${drivename}:/q \
+ | sed 's/\([^ ]*[ ]*\)\{3\}\([^ ]*\).*$/\2/'`
+echo -n "Number of disk cylinders? [$cyls_per_disk]"
+getresp $cyls_per_disk
+cyls_per_disk="$resp"
+
+tracks_per_cyl=`cat /kern/msgbuf \
+ | sed -n -e /^${drivename}:/p -e /^${drivename}:/q \
+ | sed 's/\([^ ]*[ ]*\)\{5\}\([^ ]*\).*$/\2/'`
+echo -n "Number of disk tracks (heads) per disk cylinder? [$tracks_per_cyl]"
+getresp $tracks_per_cyl
+tracks_per_cyl="$resp"
+
+sects_per_track=`cat /kern/msgbuf \
+ | sed -n -e /^${drivename}:/p -e /^${drivename}:/q \
+ | sed 's/\([^ ]*[ ]*\)\{7\}\([^ ]*\).*$/\2/'`
+echo -n "Number of disk sectors per disk track? [$sects_per_track]"
+getresp $sects_per_track
+sects_per_track="$resp"
+
+cylindersize=`expr $sects_per_track \* $tracks_per_cyl`
+cylbytes=`expr $cylindersize \* $bytes_per_sect`
+disksize=`expr $cylindersize \* $cyls_per_disk`
+
+echo ""
+echo "Your disk has a total of $disksize $bytes_per_sect byte sectors,"
+echo "arranged as $cyls_per_disk cylinders which contain $cylindersize "
+echo "sectors ($cylbytes bytes) each."
+echo ""
+echo "You can specify partition sizes in cylinders ('c') or sectors ('s')."
+while [ "X${sizemult}" = "X" ]; do
+ echo -n "What units would you like to use? [cylinders] "
+ getresp cylinders
+ case "$resp" in
+ c*|C*)
+ sizemult=$cylindersize
+ sizeunit="cylinders"
+ maxdisk=$cyls_per_disk
+ ;;
+ s*|S*)
+ sizemult=1
+ sizeunit="sectors"
+ maxdisk=$disksize;
+ ;;
+ *)
+ echo "Enter cylinders ('c') or sectors ('s')."
+ ;;
+ esac
+done
+
+if [ $sizeunit = "sectors" ]; then
+ echo "For best disk performance or workable CHS-translating IDE systems,"
+ echo "partitions should begin and end on cylinder boundaries. Wherever"
+ echo "possible, use multiples of the cylinder size ($cylindersize sectors)."
+fi
+
+echo -n ""
+echo -n "Size of OpenBSD portion of disk (in $sizeunit) ? [$maxdisk] "
+getresp "$maxdisk"
+partition=$resp
+partition_sects=`expr $resp \* $sizemult`
+part_offset=0
+if [ $partition_sects -lt $disksize ]; then
+ echo -n "Offset of OpenBSD portion of disk (in $sizeunit)? "
+ getresp
+ part_offset=$resp
+fi
+badspacesec=0
+if [ "$sect_fwd" = "sf:" ]; then
+ badspacecyl=`expr $sects_per_track + 126`
+ badspacecyl=`expr $badspacecyl + $cylindersize - 1`
+ badspacecyl=`expr $badspacecyl / $cylindersize`
+ badspacesec=`expr $badspacecyl \* $cylindersize`
+ echo ""
+ echo -n "Using $badspacesec sectors ($badspacecyl cylinders) for the "
+ echo "bad144 bad block table"
+fi
+
+sects_left=`expr $partition_sects - $badspacesec`
+units_left=`expr $sects_left / $sizemult`
+echo ""
+echo "There are $units_left $sizeunit left to allocate."
+echo ""
+root=0
+while [ $root -eq 0 ]; do
+ echo -n "Root partition size (in $sizeunit)? "
+ getresp
+ case $resp in
+ [1-9]*)
+ total=$resp
+ if [ $total -gt $units_left ]; then
+ echo -n "Root size is greater than remaining "
+ echo "free space on disk."
+ else
+ root=$resp
+ fi
+ ;;
+ esac
+done
+root_offset=$part_offset
+part_used=`expr $root + $badspacesec / $sizemult`
+units_left=`expr $partition - $part_used`
+echo ""
+
+swap=0
+while [ $swap -eq 0 ]; do
+ echo "$units_left $sizeunit remaining in OpenBSD portion of disk."
+ echo -n "Swap partition size (in $sizeunit)? "
+ getresp
+ case $resp in
+ [1-9]*)
+ if [ $swap -gt $units_left ]; then
+ echo -n "Swap size is greater than remaining "
+ echo "free space on disk."
+ else
+ swap=$resp
+ fi
+ ;;
+ esac
+done
+swap_offset=`expr $root_offset + $root`
+part_used=`expr $part_used + $swap`
+echo ""
+
+fragsize=1024
+blocksize=8192
+$DONTDOIT fsck -t ffs /dev/rfd0a
+$DONTDOIT mount -u /dev/fd0a /
+cat /etc/disktab.preinstall > $DT
+echo "" >> $DT
+echo "$labelname|OpenBSD installation generated:\\" >> $DT
+echo " :dt=${type}:ty=winchester:\\" >> $DT
+echo -n " :nc#${cyls_per_disk}:ns#${sects_per_track}" >> $DT
+echo ":nt#${tracks_per_cyl}:\\" >> $DT
+echo " :se#${bytes_per_sect}:${sect_fwd}\\" >> $DT
+_size=`expr $root \* $sizemult`
+_offset=`expr $root_offset \* $sizemult`
+echo -n " :pa#${_size}:oa#${_offset}" >> $DT
+echo ":ta=4.2BSD:ba#${blocksize}:fa#${fragsize}:\\" >> $DT
+_size=`expr $swap \* $sizemult`
+_offset=`expr $swap_offset \* $sizemult`
+echo " :pb#${_size}:ob#${_offset}:tb=swap:\\" >> $DT
+echo " :pc#${disksize}:oc#0:\\" >> $DT
+
+echo "You will now have to enter information about any other partitions"
+echo "to be created in the OpenBSD portion of the disk. This process will"
+echo "be complete when you've filled up all remaining space in the OpenBSD"
+echo "portion of the disk."
+
+while [ $part_used -lt $partition ]; do
+ part_size=0
+ units_left=`expr $partition - $part_used`
+ while [ $part_size -eq 0 ]; do
+ echo ""
+ echo -n "$units_left $sizeunit remaining in OpenBSD portion of "
+ echo "the disk"
+ echo -n "Next partition size (in $sizeunit) [$units_left] ? "
+ getresp "$units_left"
+ case $resp in
+ [1-9]*)
+ total=`expr $part_used + $resp`
+ if [ $total -gt $partition ]; then
+ echo "That would make the parition too large to fit!"
+ else
+ part_size=$resp
+ part_used=$total
+ part_name=""
+ while [ "$part_name" = "" ]; do
+ echo -n "Mount point? "
+ getresp
+ part_name=$resp
+ done
+ fi
+ ;;
+ esac
+ done
+ # XXX we skip partition d to avoid user confusion
+ if [ "$ename" = "" ]; then
+ ename=$part_name
+ offset=`expr $part_offset + $root + $swap`
+ _size=`expr $part_size \* $sizemult`
+ _offset=`expr $offset \* $sizemult`
+ echo -n " :pe#${_size}:oe#${_offset}" >> $DT
+ echo ":te=4.2BSD:be#${blocksize}:fe#${fragsize}:\\" >> $DT
+ offset=`expr $offset + $part_size`
+ elif [ "$fname" = "" ]; then
+ fname=$part_name
+ _size=`expr $part_size \* $sizemult`
+ _offset=`expr $offset \* $sizemult`
+ echo -n " :pf#${_size}:of#${_offset}" >> $DT
+ echo ":tf=4.2BSD:bf#${blocksize}:ff#${fragsize}:\\" >> $DT
+ offset=`expr $offset + $part_size`
+ elif [ "$gname" = "" ]; then
+ gname=$part_name
+ _size=`expr $part_size \* $sizemult`
+ _offset=`expr $offset \* $sizemult`
+ echo -n " :pg#${_size}:og#${_offset}" >> $DT
+ echo ":tg=4.2BSD:bg#${blocksize}:fg#${fragsize}:\\" >> $DT
+ offset=`expr $offset + $part_size`
+ elif [ "$hname" = "" ]; then
+ hname=$part_name
+ _size=`expr $part_size \* $sizemult`
+ _offset=`expr $offset \* $sizemult`
+ echo -n " :ph#${_size}:oh#${_offset}" >> $DT
+ echo ":th=4.2BSD:bh#${blocksize}:fh#${fragsize}:\\" >> $DT
+ part_used=$partition
+ elif [ "$iname" = "" ]; then
+ iname=$part_name
+ _size=`expr $part_size \* $sizemult`
+ _offset=`expr $offset \* $sizemult`
+ echo -n " :pi#${_size}:oi#${_offset}" >> $DT
+ echo ":ti=4.2BSD:bi#${blocksize}:fi#${fragsize}:\\" >> $DT
+ part_used=$partition
+ elif [ "$jname" = "" ]; then
+ jname=$part_name
+ _size=`expr $part_size \* $sizemult`
+ _offset=`expr $offset \* $sizemult`
+ echo -n " :pj#${_size}:oj#${_offset}" >> $DT
+ echo ":tj=4.2BSD:bj#${blocksize}:fj#${fragsize}:\\" >> $DT
+ part_used=$partition
+ elif [ "$kname" = "" ]; then
+ kname=$part_name
+ _size=`expr $part_size \* $sizemult`
+ _offset=`expr $offset \* $sizemult`
+ echo -n " :pk#${_size}:ok#${_offset}" >> $DT
+ echo ":tk=4.2BSD:bk#${blocksize}:fk#${fragsize}:\\" >> $DT
+ part_used=$partition
+ elif [ "$lname" = "" ]; then
+ lname=$part_name
+ _size=`expr $part_size \* $sizemult`
+ _offset=`expr $offset \* $sizemult`
+ echo -n " :pl#${_size}:ol#${_offset}" >> $DT
+ echo ":tl=4.2BSD:bl#${blocksize}:fl#${fragsize}:\\" >> $DT
+ part_used=$partition
+ elif [ "$mname" = "" ]; then
+ mname=$part_name
+ _size=`expr $part_size \* $sizemult`
+ _offset=`expr $offset \* $sizemult`
+ echo -n " :pm#${_size}:om#${_offset}" >> $DT
+ echo ":tm=4.2BSD:bm#${blocksize}:fm#${fragsize}:\\" >> $DT
+ part_used=$partition
+ elif [ "$nname" = "" ]; then
+ nname=$part_name
+ _size=`expr $part_size \* $sizemult`
+ _offset=`expr $offset \* $sizemult`
+ echo -n " :pn#${_size}:on#${_offset}" >> $DT
+ echo ":tn=4.2BSD:bn#${blocksize}:fn#${fragsize}:\\" >> $DT
+ part_used=$partition
+ elif [ "$oname" = "" ]; then
+ oname=$part_name
+ _size=`expr $part_size \* $sizemult`
+ _offset=`expr $offset \* $sizemult`
+ echo -n " :po#${_size}:oo#${_offset}" >> $DT
+ echo ":to=4.2BSD:bo#${blocksize}:fo#${fragsize}:\\" >> $DT
+ part_used=$partition
+ elif [ "$pname" = "" ]; then
+ pname=$part_name
+ _size=`expr $part_size \* $sizemult`
+ _offset=`expr $offset \* $sizemult`
+ echo -n " :pp#${_size}:op#${_offset}" >> $DT
+ echo ":tp=4.2BSD:bp#${blocksize}:fp#${fragsize}:\\" >> $DT
+ part_used=$partition
+ fi
+done
+echo "" >> $DT
+sync
+
+echo ""
+echo "THIS IS YOUR LAST CHANCE!!!"
+echo ""
+echo -n "Are you SURE you want OpenBSD installed on your hard drive? (yes/no) "
+answer=""
+while [ "$answer" = "" ]; do
+ getresp
+ case $resp in
+ yes|YES)
+ echo ""
+ echo "Here we go..."
+ answer=yes
+ ;;
+ no|NO)
+ echo ""
+ echo -n "OK, then. enter 'halt' to halt the machine. "
+ echo "Once the machine has halted,"
+ echo -n "remove the floppy, and press any key to "
+ echo "reboot."
+ exit
+ ;;
+ *)
+ echo -n "I want a yes or no answer... well? "
+ ;;
+ esac
+done
+
+echo ""
+echo -n "Labeling disk $drivename..."
+$DONTDOIT disklabel -w -B $drivename $labelname
+echo " done."
+
+if [ "$sect_fwd" = "sf:" ]; then
+ echo -n "Initializing bad144 badblock table..."
+ $DONTDOIT bad144 $drivename 0
+ echo " done."
+fi
+
+echo "Initializing root filesystem, and mounting..."
+$DONTDOIT newfs /dev/r${drivename}a $name
+$DONTDOIT mount -v /dev/${drivename}a /mnt
+if [ "$ename" != "" ]; then
+ echo ""
+ echo "Initializing $ename filesystem, and mounting..."
+ $DONTDOIT newfs /dev/r${drivename}e $name
+ $DONTDOIT mkdir -p /mnt/$ename
+ $DONTDOIT mount -v /dev/${drivename}e /mnt/$ename
+fi
+if [ "$fname" != "" ]; then
+ echo ""
+ echo "Initializing $fname filesystem, and mounting..."
+ $DONTDOIT newfs /dev/r${drivename}f $name
+ $DONTDOIT mkdir -p /mnt/$fname
+ $DONTDOIT mount -v /dev/${drivename}f /mnt/$fname
+fi
+if [ "$gname" != "" ]; then
+ echo ""
+ echo "Initializing $gname filesystem, and mounting..."
+ $DONTDOIT newfs /dev/r${drivename}g $name
+ $DONTDOIT mkdir -p /mnt/$gname
+ $DONTDOIT mount -v /dev/${drivename}g /mnt/$gname
+fi
+if [ "$hname" != "" ]; then
+ echo ""
+ echo "Initializing $hname filesystem, and mounting..."
+ $DONTDOIT newfs /dev/r${drivename}h $name
+ $DONTDOIT mkdir -p /mnt/$hname
+ $DONTDOIT mount -v /dev/${drivename}h /mnt/$hname
+fi
+if [ "$iname" != "" ]; then
+ echo ""
+ echo "Initializing $iname filesystem, and mounting..."
+ $DONTDOIT newfs /dev/r${drivename}i $name
+ $DONTDOIT mkdir -p /mnt/$iname
+ $DONTDOIT mount -v /dev/${drivename}i /mnt/$iname
+fi
+if [ "$jname" != "" ]; then
+ echo ""
+ echo "Initializing $jname filesystem, and mounting..."
+ $DONTDOIT newfs /dev/r${drivename}j $name
+ $DONTDOIT mkdir -p /mnt/$jname
+ $DONTDOIT mount -v /dev/${drivename}j /mnt/$jname
+fi
+if [ "$kname" != "" ]; then
+ echo ""
+ echo "Initializing $kname filesystem, and mounting..."
+ $DONTDOIT newfs /dev/r${drivename}k $name
+ $DONTDOIT mkdir -p /mnt/$kname
+ $DONTDOIT mount -v /dev/${drivename}k /mnt/$kname
+fi
+if [ "$lname" != "" ]; then
+ echo ""
+ echo "Initializing $lname filesystem, and mounting..."
+ $DONTDOIT newfs /dev/r${drivename}l $name
+ $DONTDOIT mkdir -p /mnt/$lname
+ $DONTDOIT mount -v /dev/${drivename}l /mnt/$lname
+fi
+if [ "$mname" != "" ]; then
+ echo ""
+ echo "Initializing $mname filesystem, and mounting..."
+ $DONTDOIT newfs /dev/r${drivename}m $name
+ $DONTDOIT mkdir -p /mnt/$mname
+ $DONTDOIT mount -v /dev/${drivename}m /mnt/$mname
+fi
+if [ "$nname" != "" ]; then
+ echo ""
+ echo "Initializing $nname filesystem, and mounting..."
+ $DONTDOIT newfs /dev/r${drivename}n $name
+ $DONTDOIT mkdir -p /mnt/$nname
+ $DONTDOIT mount -v /dev/${drivename}n /mnt/$nname
+fi
+if [ "$oname" != "" ]; then
+ echo ""
+ echo "Initializing $oname filesystem, and mounting..."
+ $DONTDOIT newfs /dev/r${drivename}o $name
+ $DONTDOIT mkdir -p /mnt/$oname
+ $DONTDOIT mount -v /dev/${drivename}o /mnt/$oname
+fi
+if [ "$pname" != "" ]; then
+ echo ""
+ echo "Initializing $pname filesystem, and mounting..."
+ $DONTDOIT newfs /dev/r${drivename}p $name
+ $DONTDOIT mkdir -p /mnt/$pname
+ $DONTDOIT mount -v /dev/${drivename}p /mnt/$pname
+fi
+
+echo ""
+echo "Populating filesystems with bootstrapping binaries and config files"
+$DONTDOIT tar -cXf - . | (cd /mnt ; tar -xpf - )
+$DONTDOIT cp /tmp/.hdprofile /mnt/.profile
+
+echo ""
+echo -n "Creating an fstab..."
+echo /dev/${drivename}a / ffs rw 1 1 | sed -e s,//,/, > $FSTAB
+if [ "$ename" != "" ]; then
+ echo /dev/${drivename}e /$ename ffs rw 1 2 | sed -e s,//,/, >> $FSTAB
+fi
+if [ "$fname" != "" ]; then
+ echo /dev/${drivename}f /$fname ffs rw 1 3 | sed -e s,//,/, >> $FSTAB
+fi
+if [ "$gname" != "" ]; then
+ echo /dev/${drivename}g /$gname ffs rw 1 4 | sed -e s,//,/, >> $FSTAB
+fi
+if [ "$hname" != "" ]; then
+ echo /dev/${drivename}h /$hname ffs rw 1 5 | sed -e s,//,/, >> $FSTAB
+fi
+if [ "$iname" != "" ]; then
+ echo /dev/${drivename}i /$iname ffs rw 1 5 | sed -e s,//,/, >> $FSTAB
+fi
+if [ "$jname" != "" ]; then
+ echo /dev/${drivename}j /$jname ffs rw 1 5 | sed -e s,//,/, >> $FSTAB
+fi
+if [ "$kname" != "" ]; then
+ echo /dev/${drivename}k /$kname ffs rw 1 5 | sed -e s,//,/, >> $FSTAB
+fi
+if [ "$lname" != "" ]; then
+ echo /dev/${drivename}l /$lname ffs rw 1 5 | sed -e s,//,/, >> $FSTAB
+fi
+if [ "$mname" != "" ]; then
+ echo /dev/${drivename}m /$mname ffs rw 1 5 | sed -e s,//,/, >> $FSTAB
+fi
+if [ "$nname" != "" ]; then
+ echo /dev/${drivename}n /$nname ffs rw 1 5 | sed -e s,//,/, >> $FSTAB
+fi
+if [ "$oname" != "" ]; then
+ echo /dev/${drivename}o /$oname ffs rw 1 5 | sed -e s,//,/, >> $FSTAB
+fi
+if [ "$pname" != "" ]; then
+ echo /dev/${drivename}p /$pname ffs rw 1 5 | sed -e s,//,/, >> $FSTAB
+fi
+
+sync
+echo " done."
+
+echo "OK! The preliminary work of setting up your disk is now complete."
+echo ""
+echo "The remaining tasks are:"
+echo ""
+echo "To copy a OpenBSD kernel to the hard drive's root filesystem."
+echo "Once accomplished, you can boot off the hard drive."
+echo ""
+echo "To load and install the OpenBSD distribution sets."
+echo "Currently the hard drive's root filesystem is mounted on /mnt"
+echo ""
+echo "Consult the installation notes which will describe how to"
+echo "install the distribution sets and kernel. Post-installation"
+echo "configuration is also discussed therein."
+echo ""
+echo "GOOD LUCK!"
+echo ""
--- /dev/null
+# $Id: list,v 1.1 1997/04/13 17:17:55 mickey Exp $
+
+# the disktab explanation file
+COPY disktab.preinstall etc/disktab.preinstall
+
+# and the installation tools
+COPY dot.profile .profile
+COPY dot.instutils .instutils
+COPY install.md install
+COPY dot.hdprofile tmp/.hdprofile
+SPECIAL chmod 755 install
--- /dev/null
+# $Id: mtree.conf,v 1.1 1997/04/13 17:17:55 mickey Exp $
+
+/set type=dir uname=root gname=wheel mode=0755
+# .
+.
+
+# ./bin
+bin
+# ./bin
+..
+
+# ./dev
+dev
+# ./dev
+..
+
+# ./etc
+etc
+# ./etc
+..
+
+# ./mnt
+mnt
+# ./mnt
+..
+
+# ./mnt2
+mnt2
+# ./mnt2
+..
+
+# ./kern
+kern
+# ./kern
+..
+
+# ./sbin
+sbin
+# ./sbin
+..
+
+# ./tmp
+tmp mode=01777
+# ./tmp
+..
+
+# ./usr
+usr
+
+# ./usr/bin
+bin
+# ./usr/bin
+..
+
+# ./usr/mdec
+mdec
+# ./usr/mdec
+..
+
+# ./usr/sbin
+sbin
+# ./usr/sbin
+..
+
+# ./usr/share
+share
+
+# ./usr/share/misc
+misc
+# ./usr/share/misc
+..
+
+# ./usr/share
+..
+
+# ./usr
+..
--- /dev/null
+# $OpenBSD: raminst.conf,v 1.1 1997/04/13 17:17:55 mickey Exp $
+#
+# instbin.conf - unified binary for the inst/upgr floppies
+#
+
+srcdirs bin sbin usr.bin/less usr.bin usr.sbin gnu/usr.bin
+
+progs bad144 cat chmod chown chroot cp dd df disklabel ed expr fsck_ffs
+progs ftp fdisk
+progs ifconfig init less ln ls mkdir mknod mount mount_cd9660
+progs mount_ffs mount_msdos mount_nfs mount_kernfs
+progs mv newfs pax pdksh ping pwd reboot rm route
+progs sed shutdown slattach strings stty sync test tip umount
+progs rsh restore gzip
+
+ln chown chgrp
+ln fsck_ffs fsck
+ln less more
+ln pax tar
+ln pdksh sh
+ln pdksh -sh # init invokes the shell this way
+ln test [
+ln reboot halt
+
+libs -ledit -lutil -ltermcap -lkrb -ldes -ll -lm
--- /dev/null
+echo rdconfig ${1} ${2}
+rdconfig ${1} ${2} &
+echo $! >rd.pid
+
-# $Id: Makefile,v 1.3 1995/12/14 07:00:15 deraadt Exp $
+# $Id: Makefile,v 1.4 1997/04/13 17:17:56 mickey Exp $
TOP= ${.CURDIR}/..
.include "${TOP}/Makefile.inc"
IMAGE= upgr${REV}.fs
-.include "${TOP}/inst-common/Makefile.inc"
+.include "${TOP}/common/Makefile.inc"
projects / openbsd / commitdiff