--- /dev/null
+The pmax-specific portion of the OpenBSD 2.1 release is found in the
+"pmax" subdirectory of the distribution. That subdirectory is laid
+out as follows:
+
+.../2.1/pmax/
+ INSTALL.pmax Installation notes; this file.
+
+ bins/ pmax binary distribution sets;
+ see below.
+
+ simpleroot/ pmax boot and installation
+ floppies; see below.
+
+There is a pmax simpleroot image to be found in the "pmax/simpleroot"
+subdirectory of the OpenBSD 2.1 distribution. Also there is a
+simpleroot tar file there.
+
+The OpenBSD/pmax binary distribution sets contain the binaries which
+comprise the OpenBSD 2.1 release for the pmax. There are seven binary
+distribution sets. The binary distribution sets can be found in
+subdirectories of the "pmax/bins" subdirectory of the OpenBSD 2.1
+distribution tree, and are as follows:
+
+ base21 The OpenBSD/pmax 2.1 base binary distribution. You
+ MUST install this distribution set. It contains the
+ base OpenBSD utilities that are necessary for the
+ system to run and be minimally functional. It
+ includes shared library support, and excludes
+ everything described below.
+ [ 15.0M gzipped, 50.8M uncompressed ]
+
+ comp21 The OpenBSD/pmax Compiler tools. All of the tools
+ relating to C, C++, and FORTRAN (yes, there are two!).
+ This set includes the system include files
+ (/usr/include), the linker, the compiler tool chain,
+ and the various system libraries (except the shared
+ libraries, which are included as part of the base
+ set). This set also includes the manual pages for all
+ of the utilities it contains, as well as the system
+ call and library manual pages.
+ [ 16.2M gzipped, 61.1M uncompressed ]
+
+ etc21 This distribution set contains the system
+ configuration files that reside in /etc and in several
+ other places. This set MUST be installed if you are
+ installing the system from scratch, but should NOT be
+ used if you are upgrading. (If you are upgrading,
+ it's recommended that you get a copy of this set and
+ CAREFULLY upgrade your configuration files by hand.)
+ [ 93K gzipped, 450K uncompressed ]
+
+ game21 This set includes the games and their manual pages.
+ [ 2.9M gzipped, 7.5M uncompressed ]
+
+ man21 This set includes all of the manual pages for the
+ binaries and other software contained in the base set.
+ Note that it does not include any of the manual pages
+ that are included in the other sets.
+ [ 2.5M gzipped, 9.4M uncompressed ]
+
+ misc21 This set includes the system dictionaries (which are
+ rather large), the typesettable document set, and
+ man pages for other architectures which happen to be
+ installed from the source tree by default.
+ [ 1.8M gzipped, 6.2M uncompressed ]
+
+ text21 This set includes OpenBSD's text processing tools,
+ including groff, all related programs, and their
+ manual pages.
+ [ 1.0M gzipped, 4.2M uncompressed ]
+
+The pmax binary distribution sets are distributed in the same form as
+the source distribution sets; catted together, the members of a set
+form a gzipped tar file. Each pmax binary distribution set also has
+its own "CKSUMS" file, just as the source distribution sets do.
+
+The instructions given for extracting the source sets work equally
+well for the binary sets, but it is worth noting that if you use that
+method, the files are extracted "below" the current directory. That
+is, if you want to extract the binaries "into" your system, i.e.
+replace the system binaries with them, you have to run the "tar xfp"
+from /. Also note that if you upgrade or install this way, those
+programs that you are using at the time will NOT be replaced. If you
+follow the normal installation or upgrade procedures, this will be
+taken care of for you.
--- /dev/null
+OpenBSD/pmax 2.1 runs on the following classes of machines:
+ - Decstation 2100 and 3100, also known as "pmin" and "pmax"
+ - Personal Decstations (5000/20, and /25) also knonw as "MAXINE"
+ - Decstation 5000/120, /125, and /133, also knonw as "3MIN"
+ - Decstation 5000/200, also knonw as "3MAX"
+ - Decstation 5000/240, als knonw as "3MAXPLUS"
+
+OpenBSD/pmax 2.1 does *not* (yet) run on these machines:
+ - Decstation 5100 (an r2000-based cousin of the Decstation 3100)
+ - Decsystem 5400 and 5500 (Qbus-based systems, similar to
+ a Vax 'Mayfair' and 'Mayfair II', but with an r2000a or r3000
+ cpu instead of a CVAX cpu.)
+ - Decsystem 5800 (xbi-based multiprocessor, a Vax 8800 with
+ Vax CPU boards replaced with Mips cpu boards)
+
+The minimal configuration requires 8M of RAM and ~60M of disk space.
+To install the entire system requires much more disk space, and to run
+X or compile the system, more RAM is recommended. (OpenBSD with 8M of
+RAM feels like Ultrix with 8M of RAM.) Note that until you have
+around 16M of RAM, getting more RAM is more important than getting a
+faster CPU.
+
+Supported devices include:
+ Decstation 2100 and 3100 baseboard video:
+ pm one-bit mono or 8-bit pseudocolour fraem buffers.
+
+ Decstation 5000 series TurboChannel video:
+ PMAG-DV Personal Decstation baseboard 1024x768 frame buffer.
+ PMAG-BA 1024x768 8-bit colour frame buffer.
+ PMAGB-BA 1024x768 8-bit colour frame buffer.
+ PMAG-AA 1280x1024 four-bit greyscale frame buffer.
+
+ NOTE: All supported DECstation vide produces sync-on-green.
+ Be sure to use either a DEC-compatible fixed-sync monitor
+ or a multisync monitor that supports sync-on-green.
+
+ serial ports:
+ ttya and ttyb (can be used as console if needed)
+
+ ethernet:
+ on-board AMD Lance ethernet ("le0"),
+ TURBOchannel AMD Lance ethernet cards.
+
+ SCSI:
+ on-board DEC "sii" SCSI controller (2100 and 3100)
+ on-board "asc" SCSI controller (5000 series machines)
+ TurboChannel "asc" SCSI controller,
+ DEC (LK-201 or compatible) keyboard
+ DEC ("hockey puck" or compatible) mouse.
+
+
+Hardware the we do NOT currently support, but get questions
+about from time to time:
+ Q-bus Decsystem machines
+ Decstation 5100 machines
+ PrestoServe NVRAM on Decstation 5100 machines
+ audio drivers for Personal Decstation machines
+ floppy driver for Personal Decstation machines
+ TurboChannel audio hardware (LoFi)
+ PMAG-C 2-D accelerated framebuffers with onboard i860 processors
+
+ NOTE: the primary obstacle to support of all but the very
+ last item is non-availability of sample hardware for development.
+
+ The primary obstacle for the i860-based framebuffers is that there
+ is no documentation on the accelerator board.
--- /dev/null
+Installing OpenBSD is a relatively complex process, but if you have
+this document in hand it shouldn't be too much trouble.
+
+There are several ways to install OpenBSD onto a disk. The easiest way
+in terms of preliminary setup is to use the OpenBSD simpleroot that can
+be booted off your local disk. Alternatively, if your Decstation is
+hooked up in a network you can find a server and arrange for a
+diskless setup which is a convenient way to install on a machine whose
+disk does not currently hold a usable operating system (see the
+section `Installing using a diskless setup' below).
+
+
+Installing using the OpenBSD simpleroot.
+
+The miniroot is a self-contained OpenBSD filesystem holding a complete
+OpenBSD/pmax rootfilesystem plus all utilities necessary to install
+OpenBSD on a local disk. It is distributed as a plain file designed to
+be transferred to a raw disk partition from which it can be booted
+using the appropriate PROM command.
+
+Loading the simpleroot onto your raw partition is simple. On OpenBSD
+as well as SunOS you use a command like:
+
+ # dd if=simpleroot21.fs of=/dev/rsd0c bs=20b conv=sync
+
+Especially on OpenBSD/pmax you'll have to use /dev/rrz0c or something
+like that instead of /dev/rsd0c.
+
+Keep in mind that this will overwrite the contents of that disk!
+
+After transferring the simpleroot to disk, bring the system down by:
+
+ # halt
+
+Then boot the miniroot by typing the appropriate command at the PROM:
+
+ >> boot rz(0,0,0)/bsd # for Decstation 2100/3100
+
+or
+
+ >> boot 5/rz0a/bsd # for Decstation 5000's
+
+If you've loaded the simpleroot onto some other disk than `rz0' adapt
+the boot specifier accordingly.
+
+This will cause the kernel contained in the simpleroot to be booted.
+After the initial probe messages you'll asked to choose a shell with
+sh as default. Simply type Return here and you are in single user
+mode.
+
+XXX more to come here
+
+Installing using a diskless setup.
+
+First, you must setup a diskless client configuration on a server. If
+you are using a OpenBSD system as the boot-server, have a look at the
+diskless(8) manual page for guidelines on how to proceed with this.
+If the server runs another operating system, you'll have to consult
+documentation that came with it (on SunOS systems, add_client(8) is a
+good start).
+
+XXX more to come here
+
+As noted above in the section `Preparing your System for OpenBSD Installation',
+you have several options when choosing a location to store the installation
+filesets. However, the easiest way is to put the *.tar.gz files you want
+to install into the root directory for your client on the server.
+
+Next, unpack `base.tar.gz' and `etc.tar.gz' on the server in the root
+directory for your machine. If you elect to use a separately NFS-mounted
+filesystem for `/usr' with your diskless setup, make sure the "./usr" base
+files in base.tar.gz end up in the correct location. One way to do this is
+to temporarily use a loopback mount on the server, re-routing <root>/usr to
+your server's exported OpenBSD "/usr" directory. Also put the kernel and the
+install/upgrade scripts into the root directory.
+
+A few configuration files need to be edited:
+
+ <root>/etc/hosts
+ Add the IP addresses of both server and client.
+
+ <root>/etc/myname
+ This files contains the client's hostname; use the same
+ name as in <root>/etc/hosts.
+
+ <root>/etc/fstab
+ Enter the entries for the remotely mounted filesystems.
+ For example:
+ server:/export/root/client / nfs rw 0 0
+ server:/export/exec/sun4.OpenBSD /usr nfs rw 0 0
+
+Now you must populate the the `/dev' directory for your client. If you server
+runs SunOS 4.x, you can simply change your working directory to `<root>/dev'
+and run the MAKEDEV script: `sh MAKEDEV all'.
+
+On SunOS 5.x systems, MAKEDEV can also be used, but there'll be error
+messages about unknown user and groups. These errors are inconsequential
+for the purpose of installing OpenBSD. However, you may want to correct them
+if you plan to the diskless setup regularly. In that case, you may re-run
+MAKEDEV on your OpenBSD machine once it has booted.
+
+XXX more to come here
+
+This will boot the OpenBSD kernel in single-user mode.
+
+If you use a diskless setup with a separately NFS-mounted /usr filesystem,
+mount /usr by hand now:
+
+OpenBSD# mount /usr
+
+XXX more to come here
+
+Here follows an example of what you'll see while in the dislabel editor.
+Do not touch any of the parameters except for the `label: ' entry and
+the actual partition size information at the bottom (the lines starting
+with `a:', `b:', ...).
+
+The size and offset fields are given in sector units. Partitions on
+which you intend to have a mountable filesystem, should be given
+fstype `4.2BSD'. Remember, the `c' partition should describe the whole
+disk. The `(Cyl. x - y)' info that appears after the hash (`#')
+character is treated as a comment and need not be filled in when
+altering partitions.
+
+Special note: the line containing `8 partitions:' is best left alone,
+even if you define less then eight partitions. If this line displays
+a different number and the program complains about it (after you leave
+the editor), then try setting it to `8 partitions:'.
+
+
+<BEGIN SAMPLE DISKLABEL SCREEN>
+OpenBSD# disklabel rz0
+ # /dev/rrz0c:
+type: SCSI
+disk: SCSI disk
+label: Hold Your Breath
+flags:
+bytes/sector: 512
+sectors/track: 64
+tracks/cylinder: 7
+sectors/cylinder: 448
+cylinders: 1429
+rpm: 3600
+interleave: 1
+trackskew: 0
+cylinderskew: 0
+headswitch: 0 # milliseconds
+track-to-track seek: 0 # milliseconds
+drivedata: 0
+
+8 partitions:
+# size offset fstype [fsize bsize cpg]
+ a: 50176 0 4.2BSD 0 0 0 # (Cyl. 0 - 111)
+ b: 64512 50176 swap # (Cyl. 112 - 255)
+ c: 640192 0 unknown # (Cyl. 0 - 1428)
+ d: 525504 114688 4.2BSD 0 0 0 # (Cyl. 256 - 1428)
+<END SAMPLE DISKLABEL SCREEN>
+
+
+else, start the installation script:
+
+OpenBSD# sh install.sh
+
+
+These scripts will do most of the work of transferring the system from the
+tar files onto your disk. You will frequently be asked for confirmation
+before the script proceeds with each phase of the installation process.
+Occasionally, you'll have to provide a piece of information such as the
+name of the disk you want to install on or IP addresses and domain names
+you want to assign. If your system has more than one disk, you may want
+to look at the output of the dmesg(8) command to see how your disks
+have been identified by the kernel.
+
+The installation script goes through the following phases:
+
+ - determination of the disk to install OpenBSD on
+ - checking of the partition information on the disk
+ - creating and mounting the OpenBSD filesystems
+ - setup of IP configuration
+ - extraction of the distribution tar files
+ - installation of boot programs
+
+
+Now try a reboot. (If needed, swap your scsi id's first). Initially
+I'd suggest you "boot" (Decstation 2100/3100) or "boot/rz0a/bsd", then
+try multiuser after that. if you boot single-user the OpenBSD
+incantation to make the root filesystem writable is
+
+ OpenBSD# mount -u /dev/sd0a /
+
+XXX more to come about setting defaults on the prom prompt
+
+Congratulations, you have successfully installed OpenBSD 2.1. When you
+reboot into OpenBSD, you should log in as "root" at the login prompt.
+There is no initial password, but if you're using the machine in a
+networked environment, you should create yourself an account and
+protect it and the "root" account with good passwords.
+
+Some of the files in the OpenBSD 2.1 distribution might need to be
+tailored for your site. In particular, the /etc/sendmail.cf file will
+almost definitely need to be adjusted, and other files in /etc will
+probably need to be modified. If you are unfamiliar with UN*X-like
+system administration, it's recommended that you buy a book that
+discusses it.
+
--- /dev/null
+Before you start you should familiarize yourself with the boot PROM
+of your machine. The older Decstation 2100 and 3100 cannot select
+a kernel from the command line. You need to set the bootpath
+environment variable to point to the disk and kernel you intend to boot.
+
+You should also examine the guide on the OpenBSD/pmax web site, which
+will hopefully soon have more complete and more up-to-date
+instructions than are given in the install document.
+
+If you're installing OpenBSD/pmax for the first time it's a very good idea
+to look at the partition sizes of disk you intend installing OpenBSD on.
+Changing the size of partitions after you've installed is difficult.
+If you do not have a spare bootable disk, it may be simpler to re-install
+OpenBSD again from scratch.
+
+But if you don't have a second disk or plan to do an installation via
+netbooting you don't have any choice about the partition sizes (at
+least not for the root and the swap partitions) because they are set
+in the simpleroot image to to 32M for root and 64M for swap. About the
+rest of your disk you can still decide yourself.
+
+Asumming a classic partition scheme with root (`/') and /usr filesystems,
+a comfortable size for the OpenBSD root filesystem partition is about 32M;
+a good initial size for the swap partition is twice the amount of physical
+memory in your machine (though, unlike Ultrix, there are no restrictions on
+the size of the swap partition that would render part of your memory
+unusable). A full binary installation, without X11 or other additional
+software, takes about 130MB in `/usr'.
--- /dev/null
+Because this is the first release of OpenBSD for the pmax - there is no
+upgrade option in this release.
--- /dev/null
+OpenBSD 2.1 is the first public release of OpenBSD for the DECstation
+and DECsystem family of computers. This release includes kernel
+support for ELF shared libraries and uses them througout the
+userland.
--- /dev/null
+Installation is supported from several media types, including:
+ NFS partitions
+ FTP
+ Tape
+
+The steps necessary to prepare the distribution sets
+for installation depend on which method of installation
+you choose. The various methods are explained below.
+
+To prepare for installing via an NFS partition:
+
+ Place the OpenBSD software you wish to install into
+ a directory on an NFS server, and make that directory
+ mountable by the machine which you will be installing
+ OpenBSD on. This will probably require modifying the
+ /etc/exports file of the NFS server and resetting
+ mountd, acts which will require superuser privileges.
+ Note the numeric IP address of the NFS server and of
+ the router closest to the the new OpenBSD machine,
+ if the NFS server is not on a network which is
+ directly attached to the OpenBSD machine.
+
+ If you are using a diskless setup to install OpenBSD on
+ your machine, you can take advantage of the fact that
+ the above has already been done on your machine's server.
+ So, you can conveniently put the OpenBSD filesets in your
+ machine's root filesystem on the server where the install
+ program can find them.
+
+ Once you have done this, you can proceed to the next
+ step in the installation process, preparing your
+ system for OpenBSD installation.
+
+To prepare for installing via FTP:
+
+ NOTE: this method of installation is recommended
+ only for those already familiar with using
+ the BSD network-manipulation commands and
+ interfaces. If you aren't, this documentation
+ should help, but is not intended to be
+ all-encompassing.
+
+ The preparations for this method of installation
+ are easy: all you have to do is make sure that
+ there's some FTP site from which you can retrieve
+ the OpenBSD installation when it's time to do
+ the install. You should know the numeric IP
+ address of that site, the numeric IP address of
+ your nearest router if one is necessary
+
+ Once you have done this, you can proceed to the next
+ step in the installation process, preparing your
+ system for OpenBSD installation.
+
+To prepare for installing via a tape:
+
+ To install OpenBSD from a tape, you need to somehow
+ get the OpenBSD filesets you wish to install on
+ your system on to the appropriate kind of tape,
+ in tar format.
+
+ If you're making the tape on a UN*X system, the easiest
+ way to do so is:
+
+ tar cvf <tape_device> <files>
+
+ where "<tape_device>" is the name of the tape device
+ that describes the tape drive you're using (possibly
+ something like /dev/nrst0, but we make no guarantees 8-).
+ Under SunOS 5.x, this would be something like /dev/rmt/0mbn.
+ Again, your mileage may vary. If you can't figure it out,
+ ask your system administrator. "<files>" are the names
+ of the "set_name.nnn" files which you want to be placed
+ on the tape.
+
+ Once you have done this, you can proceed to the next
+ step in the installation process, preparing your
+ system for OpenBSD installation.
projects / openbsd / commitdiff