Use multi-chunk RAID 1C with keydisk on softraid enabled archs

Keydisks requires special treatment and should not be touched by installboot.
In real setups they are probably offline (temporary USB stick, only present
during boot to unlock), but when they are around (keydisk chunk on same disk
as crypto volume)...

installboot currently installs treats keydisk like any other chunk, which
must be fixed.

Thus change the tests into a should-work-but-currently-broken setup so an
installboot fix can be immediately tested against it.

diff --git a/regress/usr.sbin/installboot/Makefile b/regress/usr.sbin/installboot/Makefile
index 7a74b35..653600e 100644 (file)
--- a/regress/usr.sbin/installboot/Makefile
+++ b/regress/usr.sbin/installboot/Makefile
@@ -1,4 +1,4 @@
-#      $OpenBSD: Makefile,v 1.20 2022/09/05 19:32:50 kn Exp $
+#      $OpenBSD: Makefile,v 1.21 2022/09/06 19:35:21 kn Exp $
 
 INSTALLBOOT ?=         /usr/sbin/installboot
 DRY_RUN =              ${INSTALLBOOT} -n
@@ -43,7 +43,12 @@ STAGEDIR =           /usr/mdec
 STAGEFILES =           ${STAGENAMES:=${STAGEDIR}/%}
 
 .if ${USE_SOFTRAID:L} == "yes"
+# install on multi-chunk RAID 1C with keydisk so installboot(8) must
+# - iterate over chunks
+# - ignore the keydisk/not install to it
 NDISKS ?=              1 2
+KEYDISKFILE =          keydisk.img
+KEYDEVFILE =           keydev.txt
 .else
 NDISKS =               1
 .endif
@@ -60,6 +65,10 @@ create-disks:
        dd if=/dev/zero  of=disk${n}.img bs=1m count=0 seek=64 status=none
        ${SUDO} vnconfig -- disk${n}.img 1>diskdev${n}.txt
 .endfor
+.if ${USE_SOFTRAID:L} == "yes"
+       dd if=/dev/zero  of=${KEYDISKFILE} bs=1m count=0 seek=2 status=none
+       ${SUDO} vnconfig -- ${KEYDISKFILE} 1>${KEYDEVFILE}
+.endif
 
 format-disks: create-disks
 .for devfile in ${DISKDEVFILES}
@@ -69,11 +78,15 @@ format-disks: create-disks
                ${SUDO} disklabel -wAT/dev/stdin -- "$$(<${devfile})" 1>/dev/null
 .  endif
 .endfor
+.if ${USE_SOFTRAID:L} == "yes"
+       echo 'RAID 1M' | \
+               ${SUDO} disklabel -wAT/dev/stdin -- "$$(<${KEYDEVFILE})" 1>/dev/null
+.endif
 
 create-root: format-disks
 .if ${USE_SOFTRAID:L} == "yes"
        ${SUDO} bioctl -l"$$(sed -- s/$$/a/ ${DISKDEVFILES} | paste -sd, -- -)" \
-           -cc -- softraid0 | \
+           -c1C -k"$$(<${KEYDEVFILE})"a -- softraid0 | \
                awk -- '{ print $$NF }' 1>${ROOTDEVFILE}
 .else
        ln -s -- ${DISKDEVFILES} ${ROOTDEVFILE}
@@ -148,6 +161,9 @@ dry-toomany:
 
 
 CLEANFILES =           ${DISKFILES} ${DISKDEVFILES} ${ROOTDEVFILE}
+.if ${USE_SOFTRAID:L} == "yes"
+CLEANFILES +=          ${KEYDISKFILE} ${KEYDEVFILE}
+.endif
 REGRESS_CLEANUP =      cleanup
 
 # allow failure to always cleanup as much as possible
@@ -156,6 +172,7 @@ cleanup:
        -rmdir -- ${MOUNTPOINT} 2>/dev/null
 .if ${USE_SOFTRAID:L} == "yes"
        -${SUDO} bioctl -d -- "$$(<${ROOTDEVFILE})" 2>/dev/null
+       -${SUDO} vnconfig -u -- "$$(<${KEYDEVFILE})" 2>/dev/null
 .endif
 .for devfile in ${DISKDEVFILES}
        -${SUDO} vnconfig -u -- "$$(<${devfile})" 2>/dev/null