-# -*- mode: Fundamental; tab-width: 4; -*-
-# $OpenBSD: bsd.port.mk,v 1.8 1996/12/22 17:46:02 niklas Exp $
+#-*- mode: Fundamental; tab-width: 4; -*-
+# ex:ts=4
+# $OpenBSD: bsd.port.mk,v 1.9 1996/12/25 20:10:09 imp Exp $
+# $NetBSD: $
#
# bsd.port.mk - 940820 Jordan K. Hubbard.
# This file is in the public domain.
#
-# FreeBSD Id: bsd.port.mk,v 1.226 1996/09/24 06:48:22 asami Exp $
+# FreeBSD Id: bsd.port.mk,v 1.241 1996/12/25 02:27:44 imp Exp
#
# Please view me with 4 column tabs!
#
# MAINTAINER= asami@FreeBSD.ORG
#
+# OPENBSD_MAINTAINER= imp@OpenBSD.ORG
+#
# Supported Variables and their behaviors:
#
# Variables that typically apply to all ports:
#
-# PORTSDIR - The root of the ports tree (default: /usr/ports).
+# OPSYS - Portability clause. This is the operating system the
+# makefile is being used on. Automatically set to
+# "FreeBSD," "NetBSD," or "OpenBSD" as appropriate.
+# PORTSDIR - The root of the ports tree. Defaults:
+# OpenBSD/FreeBSD: /usr/ports
+# NetBSD: /usr/opt
# DISTDIR - Where to get gzip'd, tarballed copies of original sources
-# (default: ${PORTSDIR}/distfiles/${DIST_SUBDIR}).
+# (default: ${PORTSDIR}/distfiles).
# PREFIX - Where to install things in general (default: /usr/local).
# MASTER_SITES - Primary location(s) for distribution files if not found
-# locally (default:
-# ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/)
+# locally.
# PATCH_SITES - Primary location(s) for distribution patch files
-# (see PATCHFILES below) if not found locally (default:
-# ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/)
+# (see PATCHFILES below) if not found locally.
#
+# MASTER_SITE_BACKUP - Backup location(s) for distribution files and patch
+# files if not found locally and ${MASTER_SITES}/${PATCH_SITES}
+# (default:
+# ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/)
# MASTER_SITE_OVERRIDE - If set, override the MASTER_SITES setting with this
# value.
-# MASTER_SITE_FREEBSD - If set, only use the FreeBSD master repository for
+# MASTER_SITE_FREEBSD - If set, only use ${MASTER_SITE_BACKUP} for
# MASTER_SITES.
# PACKAGES - A top level directory where all packages go (rather than
# going locally to each port). (default: ${PORTSDIR}/packages).
# XMKMF - Set to path of `xmkmf' if not in $PATH (default: xmkmf -a ).
# MAINTAINER - The e-mail address of the contact person for this port
# (default: ports@FreeBSD.ORG).
-# CATEGORIES - A list of descriptive categories into which this port falls
-# (default: orphans).
+# CATEGORIES - A list of descriptive categories into which this port falls.
#
# Variables that typically apply to an individual port. Non-Boolean
# variables without defaults are *mandatory*.
# PATCH_SITES (see above). They will automatically be
# uncompressed before patching if the names end with
# ".gz" or ".Z".
-# DIST_SUBDIR - Suffix to ${DISTDIR} (see above). If set, all ${DISTFILES}
+# DIST_SUBDIR - Suffix to ${DISTDIR}. If set, all ${DISTFILES}
# and ${PATCHFILES} will be put in this subdirectory of
# ${DISTDIR}. Also they will be fetched in this subdirectory
# from FreeBSD mirror sites.
+# ALLFILES - All of ${DISTFILES} and ${PATCHFILES}.
+# IGNOREFILES - If some of the ${ALLFILES} are not checksum-able, set
+# this variable to their names.
# PKGNAME - Name of the package file to create if the DISTNAME
# isn't really relevant for the port/package
# (default: ${DISTNAME}).
#
# NO_BUILD - Use a dummy (do-nothing) build target.
# NO_CONFIGURE - Use a dummy (do-nothing) configure target.
-# NO_CDROM - Use dummy (do-nothing) targets if FOR_CDROM is set.
+# NO_CDROM - Port may not go on CDROM. Set this string to reason.
# NO_DESCRIBE - Use a dummy (do-nothing) describe target.
# NO_EXTRACT - Use a dummy (do-nothing) extract target.
# NO_INSTALL - Use a dummy (do-nothing) install target.
# NO_WRKDIR - There's no work directory at all; port does this someplace
# else.
# NO_DEPENDS - Don't verify build of dependencies.
-# BROKEN - Port is broken.
+# BROKEN - Port is broken. Set this string to the reason why.
# RESTRICTED - Port is restricted. Set this string to the reason why.
# USE_GMAKE - Says that the port uses gmake.
# USE_IMAKE - Says that the port uses imake.
# PATCH_DEBUG - If set, print out more information about the patches as
# it attempts to apply them.
#
-# Variables that serve as convenient "aliases" for your *-install targets:
-#
+# Variables that serve as convenient "aliases" for your *-install targets.
# Use these like: "${INSTALL_PROGRAM} ${WRKSRC}/prog ${PREFIX}/bin".
+#
# INSTALL_PROGRAM - A command to install binary executables.
# INSTALL_SCRIPT - A command to install executable scripts.
# INSTALL_DATA - A command to install sharable data.
# INSTALL_MAN - A command to install manpages (doesn't compress).
#
+# If your port doesn't automatically compress manpages, set the following.
+# Depending on the setting of NOMANCOMPRESS, the make rules will compress
+# the manpages for you.
+#
+# MAN<sect> - A list of manpages, categorized by section. For
+# example, if your port has "man/man1/foo.1" and
+# "man/mann/bar.n", set "MAN1=foo.1" and "MANN=bar.n".
+# The available sections chars are "123456789LN".
+# MANPREFIX - The directory prefix for ${MAN<sect>} (default: ${PREFIX}).
+#
# Default targets and their behaviors:
#
# fetch - Retrieves ${DISTFILES} (and ${PATCHFILES} if defined)
# NEVER override the "regular" targets unless you want to open
# a major can of worms.
+# Get the operating system type
+OPSYS!= uname -s
+
.if exists(${.CURDIR}/../Makefile.inc)
.include "${.CURDIR}/../Makefile.inc"
.endif
-.include <bsd.own.mk>
+.if (${OPSYS} == "OpenBSD")
+NOMANCOMPRESS?=yes
+.endif
# These need to be absolute since we don't know how deep in the ports
# tree we are and thus can't go relative. They can, of course, be overridden
-# by individual Makefiles.
+# by individual Makefiles or local system make configuration.
+.if (${OPSYS} == "NetBSD")
+PORTSDIR?= ${DESTDIR}/usr/opt
+.else
PORTSDIR?= ${DESTDIR}/usr/ports
+.endif
LOCALBASE?= /usr/local
X11BASE?= /usr/X11R6
-DISTDIR?= ${PORTSDIR}/distfiles/${DIST_SUBDIR}
+DISTDIR?= ${PORTSDIR}/distfiles
+_DISTDIR?= ${DISTDIR}/${DIST_SUBDIR}
PACKAGES?= ${PORTSDIR}/packages
TEMPLATES?= ${PORTSDIR}/templates
.if !defined(NO_WRKDIR)
# Miscellaneous overridable commands:
GMAKE?= gmake
XMKMF?= xmkmf -a
+.if exists(/usr/bin/md5)
+MD5?= /usr/bin/md5
+.elif exists(/bin/md5)
MD5?= /bin/md5
+.elif exists(/usr/local/bin/md5)
+MD5?= /usr/local/bin/md5
+.else
+MD5?= /sbin/md5
+.endif
MD5_FILE?= ${FILESDIR}/md5
MAKE_FLAGS?= -f
MAKEFILE?= Makefile
MAKE_ENV+= PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} MOTIFLIB="${MOTIFLIB}" CFLAGS="${CFLAGS}"
+.if (${OPSYS} == "OpenBSD")
FETCH_CMD?= /usr/bin/ftp
+.else
+FETCH_CMD?= /usr/bin/fetch
+.endif
TOUCH?= /usr/bin/touch
TOUCH_FLAGS?= -f
PATCH_DIST_ARGS+= -C
.endif
+.if exists(/bin/tar)
EXTRACT_CMD?= /bin/tar
+.else
+EXTRACT_CMD?= /usr/bin/tar
+.endif
EXTRACT_SUFX?= .tar.gz
# Backwards compatability.
.if defined(EXTRACT_ARGS)
PKG_CMD?= /usr/sbin/pkg_create
.if !defined(PKG_ARGS)
-PKG_ARGS= -v -c ${PKGDIR}/COMMENT -d ${PKGDIR}/DESCR -f ${PKGDIR}/PLIST -p ${PREFIX} -P "`${MAKE} package-depends|sort|uniq`"
+PKG_ARGS= -v -c ${PKGDIR}/COMMENT -d ${PKGDIR}/DESCR -f ${PKGDIR}/PLIST -p ${PREFIX} -P "`${MAKE} package-depends|sort -u`"
.if exists(${PKGDIR}/INSTALL)
PKG_ARGS+= -i ${PKGDIR}/INSTALL
.endif
.if exists(${PKGDIR}/REQ)
PKG_ARGS+= -r ${PKGDIR}/REQ
.endif
+.if exists(${PKGDIR}/MESSAGE)
+PKG_ARGS+= -D ${PKGDIR}/MESSAGE
+.endif
.if !defined(NO_MTREE) && defined(MTREE_LOCAL)
PKG_ARGS+= -m ${MTREE_LOCAL}
.endif
.endif
ECHO?= /bin/echo
-CAT+= /bin/cat
+CAT?= /bin/cat
CP?= /bin/cp
SETENV?= /usr/bin/env
RM?= /bin/rm
-MKDIR?= /bin/mkdir
-GZCAT?= /usr/bin/gzcat
+MKDIR?= /bin/mkdir -p
+RMDIR?= /bin/rmdir
+AWK?= /usr/bin/awk
BASENAME?= /usr/bin/basename
-SED?= /usr/bin/sed
-CAT?= /bin/cat
+FALSE?= /usr/bin/false
GREP?= /usr/bin/grep
-AWK?= /usr/bin/awk
+GZCAT?= /usr/bin/gzcat
+GZIP?= -9
+GZIP_CMD?= /usr/bin/gzip -nf ${GZIP}
+GUNZIP_CMD?= /usr/bin/gunzip -f
+SED?= /usr/bin/sed
# Used to print all the '===>' style prompts - override this to turn them off.
ECHO_MSG?= ${ECHO}
ALL_TARGET?= all
INSTALL_TARGET?= install
-# If the user has this set, go to the FreeBSD respository for everything.
+# Popular master sites
+MASTER_SITE_XCONTRIB?= \
+ ftp://ftp.x.org/contrib/${MASTER_SITE_SUBDIR}/ \
+ ftp://crl.dec.com/pub/X11/contrib/${MASTER_SITE_SUBDIR}/
+
+MASTER_SITE_GNU?= \
+ ftp://prep.ai.mit.edu/pub/gnu/${MASTER_SITE_SUBDIR}/ \
+ ftp://wuarchive.wustl.edu/systems/gnu/${MASTER_SITE_SUBDIR}/
+
+MASTER_SITE_PERL_CPAN?= \
+ ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/${MASTER_SITE_SUBDIR}/ \
+ ftp://ftp.cdrom.com/pub/perl/CPAN/modules/by-module/${MASTER_SITE_SUBDIR}/
+
+MASTER_SITE_TEX_CTAN?= \
+ ftp://ftp.cdrom.com/pub/tex/ctan/${MASTER_SITE_SUBDIR}/ \
+ ftp://wuarchive.wustl.edu/packages/TeX/${MASTER_SITE_SUBDIR}/ \
+ ftp://ftp.funet.fi/pub/TeX/CTAN/${MASTER_SITE_SUBDIR}/ \
+ ftp.tex.ac.uk/public/ctan/tex-archive/${MASTER_SITE_SUBDIR}/
+
+MASTER_SITE_SUNSITE?= \
+ ftp://sunsite.unc.edu/pub/Linux/${MASTER_SITE_SUBDIR}/ \
+ ftp://ftp.infomagic.com/pub/mirrors/linux/sunsite/${MASTER_SITE_SUBDIR}/ \
+ ftp://ftp.funet.fi/pub/mirrors/sunsite.unc.edu/pub/Linux/${MASTER_SITE_SUBDIR}/
+
+# The primary backup site.
+MASTER_SITE_BACKUP?= \
+ ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/
+
+# If the user has this set, go to the FreeBSD repository for everything.
.if defined(MASTER_SITE_FREEBSD)
-MASTER_SITE_OVERRIDE= ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/
+MASTER_SITE_OVERRIDE= ${MASTER_SITE_BACKUP}
.endif
# Empty declaration to avoid "variable MASTER_SITES recursive" error
# I guess we're in the master distribution business! :) As we gain mirror
# sites for distfiles, add them to this list.
.if !defined(MASTER_SITE_OVERRIDE)
-MASTER_SITES+= ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/
-PATCH_SITES+= ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/
+MASTER_SITES+= ${MASTER_SITE_BACKUP}
+PATCH_SITES+= ${MASTER_SITE_BACKUP}
.else
MASTER_SITES:= ${MASTER_SITE_OVERRIDE} ${MASTER_SITES}
PATCH_SITES:= ${MASTER_SITE_OVERRIDE} ${PATCH_SITES}
DISTFILES?= ${DISTNAME}${EXTRACT_SUFX}
PKGNAME?= ${DISTNAME}
+ALLFILES?= ${DISTFILES} ${PATCHFILES}
+
+.if defined(IGNOREFILES)
+CKSUMFILES!= \
+ for file in ${ALLFILES}; do \
+ ignore=0; \
+ for tmp in ${IGNOREFILES}; do \
+ if [ "$$file" = "$$tmp" ]; then \
+ ignore=1; \
+ fi; \
+ done; \
+ if [ "$$ignore" = 0 ]; then \
+ echo "$$file"; \
+ fi; \
+ done
+.else
+CKSUMFILES= ${ALLFILES}
+.endif
+
+# List of all files, with ${DIST_SUBDIR} in front. Used for checksum.
+.if defined(DIST_SUBDIR)
+_CKSUMFILES?= ${CKSUMFILES:S/^/${DIST_SUBDIR}\//}
+_IGNOREFILES?= ${IGNOREFILES:S/^/${DIST_SUBDIR}\//}
+.else
+_CKSUMFILES?= ${CKSUMFILES}
+_IGNOREFILES?= ${IGNOREFILES}
+.endif
+
# This is what is actually going to be extracted, and is overridable
# by user.
EXTRACT_ONLY?= ${DISTFILES}
# Documentation
MAINTAINER?= ports@FreeBSD.ORG
-CATEGORIES?= orphans
+
+.if !defined(CATEGORIES)
+.BEGIN:
+ @${ECHO_MSG} "CATEGORIES is mandatory."
+ @${FALSE}
+.endif
# Note this has to start with a capital letter (or more accurately, it
# shouldn't match "[a-z]*"), see the target "delete-package-links" below.
HAS_CONFIGURE= yes
.endif
+MANPREFIX?= ${PREFIX}
+
+.for sect in 1 2 3 4 5 6 7 8 9
+MAN${sect}PREFIX?= ${MANPREFIX}
+.endfor
+MANLPREFIX?= ${MANPREFIX}
+MANNPREFIX?= ${MANPREFIX}
+
+MANLANG?= "" # english only by default
+
+.for lang in ${MANLANG}
+
+.for sect in 1 2 3 4 5 6 7 8 9
+.if defined(MAN${sect})
+_MANPAGES+= ${MAN${sect}:S%^%${MAN${sect}PREFIX}/man/${lang}/man${sect}/%}
+.endif
+.endfor
+
+.if defined(MANL)
+_MANPAGES+= ${MANL:S%^%${MANLPREFIX}/man/${lang}/manl/%}
+.endif
+
+.if defined(MANN)
+_MANPAGES+= ${MANN:S%^%${MANNPREFIX}/man/${lang}/mann/%}
+.endif
+
+.endfor
+
+.if defined(_MANPAGES) && defined(MANCOMPRESSED)
+_MANPAGES:= ${_MANPAGES:S/$/.gz/}
+.endif
+
.MAIN: all
################################################################
# Don't build a port if it's broken.
################################################################
-.if (defined(IS_INTERACTIVE) && defined(BATCH)) || \
- (!defined(IS_INTERACTIVE) && defined(INTERACTIVE)) || \
- (defined(REQUIRES_MOTIF) && !defined(HAVE_MOTIF)) || \
- (defined(NO_CDROM) && defined(FOR_CDROM)) || \
- (defined(RESTRICTED) && defined(NO_RESTRICTED)) || \
- defined(BROKEN)
-IGNORE= yes
+.if (defined(IS_INTERACTIVE) && defined(BATCH))
+IGNORE= "is an interactive port"
+.elif (!defined(IS_INTERACTIVE) && defined(INTERACTIVE))
+IGNORE= "is not an interactive port"
+.elif (defined(REQUIRES_MOTIF) && !defined(HAVE_MOTIF))
+IGNORE= "requires Motif"
+.elif (defined(NO_CDROM) && defined(FOR_CDROM))
+IGNORE= "may not be placed on a CDROM: ${NO_CDROM}"
+.elif (defined(RESTRICTED) && defined(NO_RESTRICTED))
+IGNORE= "is restricted: ${RESTRICTED}"
+.elif defined(BROKEN)
+IGNORE= "is marked as broken: ${BROKEN}"
.endif
.if defined(IGNORE)
+.if defined(IGNORE_SILENT)
+IGNORECMD= ${DO_NADA}
+.else
+IGNORECMD= ${ECHO_MSG} "===> ${PKGNAME} ${IGNORE}."
+.endif
+fetch:
+ @${IGNORECMD}
+checksum:
+ @${IGNORECMD}
+extract:
+ @${IGNORECMD}
+patch:
+ @${IGNORECMD}
+configure:
+ @${IGNORECMD}
all:
- @${DO_NADA}
+ @${IGNORECMD}
build:
- @${DO_NADA}
+ @${IGNORECMD}
install:
- @${DO_NADA}
-fetch:
- @${DO_NADA}
-configure:
- @${DO_NADA}
+ @${IGNORECMD}
package:
- @${DO_NADA}
+ @${IGNORECMD}
.endif
.if defined(ALL_HOOK)
# override from an individual Makefile.
################################################################
+# Disable checksum
+.if defined(NO_CHECKSUM) && !target(checksum)
+checksum: fetch
+ @${DO_NADA}
+.endif
+
# Disable extract
.if defined(NO_EXTRACT) && !target(extract)
extract: checksum
@${DO_NADA}
.endif
+# Disable patch
+.if defined(NO_PATCH) && !target(patch)
+patch: extract
+ @${TOUCH} ${TOUCH_FLAGS} ${PATCH_COOKIE}
+.endif
+
# Disable configure
.if defined(NO_CONFIGURE) && !target(configure)
configure: patch
@${TOUCH} ${TOUCH_FLAGS} ${CONFIGURE_COOKIE}
.endif
-# Disable describe
-.if defined(NO_DESCRIBE) && !target(describe)
-describe:
- @${DO_NADA}
-.endif
-
# Disable build
.if defined(NO_BUILD) && !target(build)
build: configure
@${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
.endif
+# Disable install
+.if defined(NO_INSTALL) && !target(install)
+install: build
+ @${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
+.endif
+
# Disable package
.if defined(NO_PACKAGE) && !target(package)
package:
+.if defined(IGNORE_SILENT)
@${DO_NADA}
+.else
+ @${ECHO_MSG} "===> ${PKGNAME} may not be packaged: ${NO_PACKAGE}."
.endif
-
-# Disable install
-.if defined(NO_INSTALL) && !target(install)
-install: build
- @${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
.endif
-# Disable patch
-.if defined(NO_PATCH) && !target(patch)
-patch: extract
- @${TOUCH} ${TOUCH_FLAGS} ${PATCH_COOKIE}
+# Disable describe
+.if defined(NO_DESCRIBE) && !target(describe)
+describe:
+ @${DO_NADA}
.endif
################################################################
.if !target(do-fetch)
do-fetch:
- @if [ ! -d ${DISTDIR} ]; then ${MKDIR} -p ${DISTDIR}; fi
- @(cd ${DISTDIR}; \
+ @${MKDIR} ${_DISTDIR}
+ @(cd ${_DISTDIR}; \
for file in ${DISTFILES}; do \
if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
if [ -h $$file -o -h `${BASENAME} $$file` ]; then \
- ${ECHO_MSG} ">> ${DISTDIR}/$$file is a broken symlink."; \
+ ${ECHO_MSG} ">> ${_DISTDIR}/$$file is a broken symlink."; \
${ECHO_MSG} ">> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
${ECHO_MSG} ">> Please correct this problem and try again."; \
exit 1; \
fi \
done; \
${ECHO_MSG} ">> Couldn't fetch it - please try to retrieve this";\
- ${ECHO_MSG} ">> port manually into ${DISTDIR} and try again."; \
+ ${ECHO_MSG} ">> port manually into ${_DISTDIR} and try again."; \
exit 1; \
fi \
done)
.if defined(PATCHFILES)
- @if [ ! -d ${DISTDIR} ]; then ${MKDIR} -p ${DISTDIR}; fi
- @(cd ${DISTDIR}; \
+ @(cd ${_DISTDIR}; \
for file in ${PATCHFILES}; do \
if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
if [ -h $$file -o -h `${BASENAME} $$file` ]; then \
- ${ECHO_MSG} ">> ${DISTDIR}/$$file is a broken symlink."; \
+ ${ECHO_MSG} ">> ${_DISTDIR}/$$file is a broken symlink."; \
${ECHO_MSG} ">> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
${ECHO_MSG} ">> Please correct this problem and try again."; \
exit 1; \
fi \
done; \
${ECHO_MSG} ">> Couldn't fetch it - please try to retrieve this";\
- ${ECHO_MSG} ">> port manually into ${DISTDIR} and try again."; \
+ ${ECHO_MSG} ">> port manually into ${_DISTDIR} and try again."; \
exit 1; \
fi \
done)
do-extract:
.if !defined(NO_WRKDIR)
@${RM} -rf ${WRKDIR}
- @${MKDIR} -p ${WRKDIR}
+ @${MKDIR} ${WRKDIR}
.endif
@for file in ${EXTRACT_ONLY}; do \
- if !(cd ${WRKDIR} && ${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${DISTDIR}/$$file ${EXTRACT_AFTER_ARGS});\
+ if !(cd ${WRKDIR} && ${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${_DISTDIR}/$$file ${EXTRACT_AFTER_ARGS});\
then \
exit 1; \
fi \
do-patch:
.if defined(PATCHFILES)
@${ECHO_MSG} "===> Applying distribution patches for ${PKGNAME}"
- @(cd ${DISTDIR}; \
+ @(cd ${_DISTDIR}; \
for i in ${PATCHFILES}; do \
if [ ${PATCH_DEBUG_TMP} = yes ]; then \
${ECHO_MSG} "===> Applying distribution patch $$i" ; \
${ECHO_MSG} "===> Perhaps you forgot the -P flag to cvs co or update?"; \
fi; \
else \
- ${ECHO_MSG} "===> Applying FreeBSD patches for ${PKGNAME}" ; \
+ ${ECHO_MSG} "===> Applying ${OPSYS} patches for ${PKGNAME}" ; \
for i in ${PATCHDIR}/patch-*; do \
case $$i in \
*.orig|*~) \
;; \
*) \
if [ ${PATCH_DEBUG_TMP} = yes ]; then \
- ${ECHO_MSG} "===> Applying FreeBSD patch $$i" ; \
+ ${ECHO_MSG} "===> Applying ${OPSYS} patch $$i" ; \
fi; \
${PATCH} ${PATCH_ARGS} < $$i; \
;; \
.if !target(do-install)
do-install:
@if [ `/bin/sh -c umask` != 0022 ]; then \
- ${ECHO_MSG} "===> Warning: your umask is \"`/bin/sh -c umask`"\".; \
- ${ECHO_MSG} " If this is not desired, set it to an appropriate value"; \
- ${ECHO_MSG} " and install this port again by \`\`make reinstall''."; \
+ ${ECHO_MSG} "===> Warning: your umask is \"`/bin/sh -c umask`"\".; \
+ ${ECHO_MSG} " If this is not desired, set it to an appropriate value"; \
+ ${ECHO_MSG} " and install this port again by \`\`make reinstall''."; \
fi
.if defined(USE_GMAKE)
@(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${INSTALL_TARGET})
${ECHO_MSG} "===> Building package for ${PKGNAME}"; \
if [ -d ${PACKAGES} ]; then \
if [ ! -d ${PKGREPOSITORY} ]; then \
- if ! ${MKDIR} -p ${PKGREPOSITORY}; then \
+ if ! ${MKDIR} ${PKGREPOSITORY}; then \
${ECHO_MSG} ">> Can't create directory ${PKGREPOSITORY}."; \
exit 1; \
fi; \
@${MAKE} ${.MAKEFLAGS} delete-package-links
@for cat in ${CATEGORIES}; do \
if [ ! -d ${PACKAGES}/$$cat ]; then \
- if ! ${MKDIR} -p ${PACKAGES}/$$cat; then \
+ if ! ${MKDIR} ${PACKAGES}/$$cat; then \
${ECHO_MSG} ">> Can't create directory ${PACKAGES}/$$cat."; \
exit 1; \
fi; \
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} build-depends lib-depends misc-depends
.endif
.if make(real-install)
- @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} run-depends
+ @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} run-depends lib-depends
.endif
.if make(real-install)
.if !defined(NO_MTREE)
X11BASE=${X11BASE} \
/bin/sh ${SCRIPTDIR}/${.TARGET:S/^real-/post-/}; \
fi
-.if make(real-install) && !defined(NO_PKG_REGISTER)
+.if make(real-install) && defined(_MANPAGES)
+.if defined(MANCOMPRESSED) && defined(NOMANCOMPRESS)
+ @${ECHO_MSG} "===> Uncompressing manual pages for ${PKGNAME}"
+.for manpage in ${_MANPAGES}
+ @${GUNZIP_CMD} ${manpage}
+.endfor
+.elif !defined(MANCOMPRESSED) && !defined(NOMANCOMPRESS)
+ @${ECHO_MSG} "===> Compressing manual pages for ${PKGNAME}"
+.for manpage in ${_MANPAGES}
+ @${GZIP_CMD} ${manpage}
+.endfor
+.endif
+.endif
+.if make(real-install) && !defined(NO_PKG_REGISTER)
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fake-pkg
.endif
.if !make(real-fetch) \
.if !target(clean)
clean: pre-clean
+.if !defined(NOCLEANDEPENDS)
+ @${MAKE} clean-depends
+.endif
@${ECHO_MSG} "===> Cleaning for ${PKGNAME}"
.if !defined(NO_WRKDIR)
- @${RM} -rf ${WRKDIR}
+ @if [ -d ${WRKDIR} ]; then \
+ if [ -w ${WRKDIR} ]; then \
+ ${RM} -rf ${WRKDIR}; \
+ else \
+ ${ECHO_MSG} "===> ${WRKDIR} not writable, skipping"; \
+ fi; \
+ fi
.else
@${RM} -f ${WRKDIR}/.*_done
.endif
.endif
+.if !target(pre-distclean)
+pre-distclean:
+ @${DO_NADA}
+.endif
+
+.if !target(distclean)
+distclean: pre-distclean clean
+ @${ECHO_MSG} "===> Dist cleaning for ${PKGNAME}"
+ @(cd ${_DISTDIR}; \
+ ${RM} -f ${DISTFILES} ${PATCHFILES})
+.if defined(DIST_SUBDIR)
+ @${RMDIR} ${_DISTDIR}
+.endif
+.endif
+
# Prints out a list of files to fetch (useful to do a batch fetch)
.if !target(fetch-list)
fetch-list:
- @if [ ! -d ${DISTDIR} ]; then ${MKDIR} -p ${DISTDIR}; fi
- @(cd ${DISTDIR}; \
+ @${MKDIR} ${_DISTDIR}
+ @(cd ${_DISTDIR}; \
for file in ${DISTFILES}; do \
if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
for site in ${MASTER_SITES}; do \
fi \
done)
.if defined(PATCHFILES)
- @(cd ${DISTDIR}; \
+ @(cd ${_DISTDIR}; \
for file in ${PATCHFILES}; do \
if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
for site in ${PATCH_SITES}; do \
.if !target(makesum)
makesum: fetch
- @if [ ! -d ${FILESDIR} ]; then ${MKDIR} -p ${FILESDIR}; fi
+ @${MKDIR} ${FILESDIR}
@if [ -f ${MD5_FILE} ]; then ${RM} -f ${MD5_FILE}; fi
@(cd ${DISTDIR}; \
- for file in ${DISTFILES} ${PATCHFILES}; do \
+ for file in ${_CKSUMFILES}; do \
${MD5} $$file >> ${MD5_FILE}; \
done)
+ @for file in ${_IGNOREFILES}; do \
+ ${ECHO} "MD5 ($$file) = IGNORE" >> ${MD5_FILE}; \
+ done
.endif
.if !target(checksum)
@if [ ! -f ${MD5_FILE} ]; then \
${ECHO_MSG} ">> No MD5 checksum file."; \
else \
- (cd ${DISTDIR}; OK=""; \
- for file in ${DISTFILES} ${PATCHFILES}; do \
+ (cd ${DISTDIR}; OK="true"; \
+ for file in ${_CKSUMFILES}; do \
CKSUM=`${MD5} < $$file`; \
CKSUM2=`${GREP} "($$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
if [ "$$CKSUM2" = "" ]; then \
- ${ECHO_MSG} ">> No checksum recorded for $$file"; \
+ ${ECHO_MSG} ">> No checksum recorded for $$file."; \
+ OK="false"; \
+ elif [ "$$CKSUM2" = "IGNORE" ]; then \
+ ${ECHO_MSG} ">> Checksum for $$file is set to IGNORE in md5 file even though"; \
+ ${ECHO_MSG} " the file is not in the "'$$'"{IGNOREFILES} list."; \
OK="false"; \
elif [ "$$CKSUM" != "$$CKSUM2" ]; then \
- ${ECHO_MSG} ">> Checksum mismatch for $$file"; \
+ ${ECHO_MSG} ">> Checksum mismatch for $$file."; \
exit 1; \
fi; \
done; \
- if [ "$$OK" = "" ]; then \
+ for file in ${_IGNOREFILES}; do \
+ CKSUM2=`${GREP} "($$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
+ if [ "$$CKSUM2" = "" ]; then \
+ ${ECHO_MSG} ">> No checksum recorded for $$file, file is in "'$$'"{IGNOREFILES} list."; \
+ OK="false"; \
+ elif [ "$$CKSUM2" != "IGNORE" ]; then \
+ ${ECHO_MSG} ">> Checksum for $$file is not set to IGNORE in md5 file even though"; \
+ ${ECHO_MSG} " the file is in the "'$$'"{IGNOREFILES} list."; \
+ OK="false"; \
+ fi; \
+ done; \
+ if [ "$$OK" = "true" ]; then \
${ECHO_MSG} "Checksums OK."; \
else \
- ${ECHO_MSG} "Checksums OK for files that have them."; \
+ ${ECHO_MSG} "There may be some inconsistencies, make sure the Makefile and md5 file"; \
+ ${ECHO_MSG} "(\"${MD5_FILE}\") are up to date."; \
fi) ; \
fi
.endif
notfound=1; \
fi; \
else \
- if which -s "$$prog"; then \
+ if which "$$prog" > /dev/null 2>&1 ; then \
${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - found"; \
notfound=0; \
else \
.endif
+.if !target(clean-depends)
+clean-depends:
+.if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS) \
+ || defined(RUN_DEPENDS)
+ @for i in ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS}; do \
+ dir=`${ECHO} $$i | ${SED} -e 's/.*://'`; \
+ if [ -d $$dir ] ; then (cd $$dir; ${MAKE} clean); fi \
+ done
+.endif
+.if defined(DEPENDS)
+ @for dir in ${DEPENDS}; do \
+ if [ -d $$dir ] ; then (cd $$dir; ${MAKE} clean); fi \
+ done
+.endif
+.endif
+
.if !target(depends-list)
depends-list:
- @for i in ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${DEPENDS}; do \
+ @for i in ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}; do \
dir=`${ECHO} $$i | ${SED} -e 's/.*://'`; \
- (cd $$dir ; ${MAKE} package-name depends-list); \
+ (cd $$dir; ${MAKE} package-name depends-list); \
+ done
+ @for dir in ${DEPENDS}; do \
+ (cd $$dir; ${MAKE} package-name depends-list); \
done
.endif
${ECHO} -n "|/dev/null"; \
fi
@${ECHO} -n "|${MAINTAINER}|${CATEGORIES}|"
- @cd ${.CURDIR} && ${ECHO} -n `make depends-list|sort|uniq`
+ @cd ${.CURDIR} && ${ECHO} -n `make depends-list|sort -u`
@${ECHO} -n "|"
- @cd ${.CURDIR} && ${ECHO} -n `make package-depends|sort|uniq`
+ @cd ${.CURDIR} && ${ECHO} -n `make package-depends|sort -u`
@${ECHO} ""
.endif
.if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || \
defined(LIB_DEPENDS) || defined(DEPENDS)
@${ECHO} -n 'This port requires package(s) "'
- @${ECHO} -n `make depends-list | sort | uniq`
+ @${ECHO} -n `make depends-list | sort -u`
@${ECHO} '" to build.'
.endif
.endif
print-package-depends:
.if defined(RUN_DEPENDS) || defined(LIB_DEPENDS) || defined(DEPENDS)
@${ECHO} -n 'This port requires package(s) "'
- @${ECHO} -n `make package-depends | sort | uniq`
+ @${ECHO} -n `make package-depends | sort -u`
@${ECHO} '" to run.'
.endif
.endif
.if !target(fake-pkg)
fake-pkg:
@if [ ! -f ${PKGDIR}/PLIST -o ! -f ${PKGDIR}/COMMENT -o ! -f ${PKGDIR}/DESCR ]; then ${ECHO} "** Missing package files for ${PKGNAME} - installation not recorded."; exit 1; fi
- @if [ ! -d ${PKG_DBDIR} ]; then ${RM} -f ${PKG_DBDIR}; ${MKDIR} -p ${PKG_DBDIR}; fi
+ @if [ ! -d ${PKG_DBDIR} ]; then ${RM} -f ${PKG_DBDIR}; ${MKDIR} ${PKG_DBDIR}; fi
.if defined(FORCE_PKG_REGISTER)
@${RM} -rf ${PKG_DBDIR}/${PKGNAME}
.endif
@if [ ! -d ${PKG_DBDIR}/${PKGNAME} ]; then \
${ECHO_MSG} "===> Registering installation for ${PKGNAME}"; \
- ${MKDIR} -p ${PKG_DBDIR}/${PKGNAME}; \
+ ${MKDIR} ${PKG_DBDIR}/${PKGNAME}; \
${PKG_CMD} ${PKG_ARGS} -O ${PKGFILE} > ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \
${CP} ${PKGDIR}/DESCR ${PKG_DBDIR}/${PKGNAME}/+DESC; \
${CP} ${PKGDIR}/COMMENT ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \
${CP} ${PKGDIR}/REQ ${PKG_DBDIR}/${PKGNAME}/+REQ; \
fi; \
else \
- ${ECHO_MSG} "===> ${PKGNAME} is already installed - perhaps an older version?"; \
- ${ECHO_MSG} " If so, you may wish to \`\`pkg_delete ${PKGNAME}'' and install"; \
- ${ECHO_MSG} " this port again by \`\`make reinstall'' to upgrade it properly."; \
+ ${ECHO_MSG} "===> ${PKGNAME} is already installed - perhaps an older version?"; \
+ ${ECHO_MSG} " If so, you may wish to \`\`pkg_delete ${PKGNAME}'' and install"; \
+ ${ECHO_MSG} " this port again by \`\`make reinstall'' to upgrade it properly."; \
fi
.endif
projects / openbsd / commitdiff