-/* $OpenBSD: ss.c,v 1.31 1997/04/05 22:59:13 kstailey Exp $ */
+/* $OpenBSD: ss.c,v 1.32 1997/04/05 23:34:20 kstailey Exp $ */
/* $NetBSD: ss.c,v 1.10 1996/05/05 19:52:55 christos Exp $ */
/*
#define SS_Q_REV_CONTRAST 0x0040 /* reverse contrast control in s/w */
#define SS_Q_HALFTONE 0x0080 /* uses non-zero halftone */
#define SS_Q_SET_RIF 0x0100 /* set RIF bit */
-#define SS_Q_PADDING_TYPE 0x0200 /* does not pad to byte boundary */
+#define SS_Q_PADDING_TYPE 0x0200 /* does not truncate to byte boundary */
#define SS_Q_BIT_ORDERING 0x0400 /* needs non-zero bit ordering */
long window_descriptor_length;
u_int8_t brightness;
*/
struct ss_quirk_inquiry_pattern ss_quirk_patterns[] = {
+ {{T_SCANNER, T_FIXED,
+ "ULTIMA ", "A6000C PLUS ", " "}, {
+ "Ultima A6000C",
+ SS_Q_HALFTONE |
+ SS_Q_PADDING_TYPE,
+ 0, 0, 0, 0, { 3, 0 }, 0, 0,
+ ULTIMA_AC6000C,
+ NULL, NULL, NULL
+ }},
{{T_SCANNER, T_FIXED,
"RICOH ", "IS50 ", " "}, {
"Ricoh IS-50",
if (ss->quirkdata->quirks & SS_Q_PADDING_TYPE)
window_data.pad_type = ss->quirkdata->pad_type;
else
- window_data.pad_type = 3; /* 3 = pad to byte boundary */
+ window_data.pad_type = 3; /* 3 = truncate to byte boundary */
if (ss->quirkdata->quirks & SS_Q_BIT_ORDERING)
_lto2l(ss->quirkdata->bit_ordering, window_data.bit_ordering);
-/* $OpenBSD: scanio.h,v 1.5 1997/03/11 03:53:55 kstailey Exp $ */
+/* $OpenBSD: scanio.h,v 1.6 1997/04/05 23:34:18 kstailey Exp $ */
/* $NetBSD: scanio.h,v 1.1 1996/02/18 20:33:18 mycroft Exp $ */
/*
#define RICOH_IS410 1 /* Ricoh IS-410 */
#define FUJITSU_M3096G 2 /* Fujitsu M3096G */
-#define HP_SCANJET_IIC 3 /* HP ScanJet IIc */
+#define HP_SCANJET_IIC 3 /* HP SCL scanners (ScanJet IIc, IIcx, ...) */
#define RICOH_FS1 4 /* Ricoh FS1 */
#define SHARP_JX600 5 /* Sharp JX600 */
#define RICOH_IS50 6 /* Ricoh IS-50 */
#define MUSTEK_12000CX 11 /* Mustek MFS12000CX */
#define EPSON_ES300C 12 /* epson es300c */
#define GENERIC_SCSI2 13 /* good luck 8c{)] */
+#define ULTIMA_AC6000C 14 /* Ultima A6000C */
#endif /* _SYS_SCANIO_H */