######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
#
-# $OpenBSD: termtypes.master,v 1.60 2017/02/07 15:14:28 nicm Exp $
+# $OpenBSD: termtypes.master,v 1.61 2017/04/19 15:20:55 nicm Exp $
#
# OpenBSD local changes:
# - add rxvt-unicode and rxvt-unicode-256color
# Report bugs and new terminal descriptions to
# bug-ncurses@gnu.org
#
-# $Revision: 1.60 $
-# $Date: 2017/02/07 15:14:28 $
+# $Revision: 1.61 $
+# $Date: 2017/04/19 15:20:55 $
#
# The original header is preserved below for reference. It is noted that there
# is a "newer" version which differs in some cosmetic details (but actually
ecma+sgr|attribute capabilities for true ECMA-48 terminals,
rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
+ecma+strikeout|ECMA-48 strikeout/crossed-out,
+ rmxx=\E[29m, smxx=\E[9m,
+
# For comparison, here are all the capabilities implied by the Intel
# Binary Compatibility Standard (level 2) that fit within terminfo.
# For more detail on this rather pathetic standard, see the comments
# nsterm*|Apple_Terminal - AppKit Terminal.app
#
-# Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and
+# Terminal.app is a Terminal emulator bundled with NeXT's NeXTSTEP and
# OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
# Server and Mac OS X operating systems. There is also a
-# "terminal.app" in GNUStep, but I believe it to be an unrelated
+# "terminal.app" in GNUstep, but I believe it to be an unrelated
# codebase and I have not attempted to describe it here.
#
-# For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
+# For NeXTSTEP, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
# are pretty much on your own. Use "nsterm-7-m" and hope for the best.
# You might also try "nsterm-7" and "nsterm-old" if you suspect your
# version supports color.
#
# The Mythology* of AppKit Terminal.app:
#
-# In the days of NeXTSTep 0.x and 1.x there were two incompatible
+# In the days of NeXTSTEP 0.x and 1.x there were two incompatible
# bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
# shareware replacement for Terminal called "Stuart" which NeXT bought
-# and used as the basis for the Terminal.app in NeXTstep 2+,
+# and used as the basis for the Terminal.app in NeXTSTEP 2+,
# OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
# don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
# capabilities for the early versions, but I believe that the
# TERM_PROGRAM_VERSION may have been reset at some point.
#
# The early versions were tailored to the NeXT character set. Sometime
-# after the Apple aquisition the encoding was swiched to MacRoman
-# (initally with serious altcharset bugs due to incomplete conversion
-# of the old NeXT code,) and then later to UTF-8. Alos sometime during
+# after the Apple acquisition the encoding was switched to MacRoman
+# (initially with serious altcharset bugs due to incomplete conversion
+# of the old NeXT code,) and then later to UTF-8. Also sometime during
# or just prior to the early days of Mac OS X, the Terminal grew ANSI
# 8-color support (initially buggy when combined with attributes, but
# that was later fixed.) More recently, around Mac OS X version 10.3
# "nsterm" to comply with the name length and case conventions and
# limitations of various software packages [notably Solaris terminfo
# and UNIX.] A single Apple_Terminal alias is retained for
-# backwards-compatbility.
+# backwards-compatibility.
#
# * Added function key support (F1-F4). These only work in Terminal.app
# version 51, hopefully the capabilities won't cause problems for people
initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
use=linux,
+# FbTerm
+# Another variant. There are two parts (src, src/lib) with the latter
+# comprising the escape-sequence parsing. The copyright notice on that
+# says it is based on GTerm by Timothy Miller.
+#
+# The original developer "dragchan" has left, but as of March 2017 there is
+# (still dead) code from May 2015 here:
+# https://github.com/izmntuk/fbterm
+#
+# The acsc string may be incorrect.
+#
+# Not used here, the program recognizes escapes for italic, underline and
+# dim, rendering those as green, cyan and gray respectively.
+fbterm|FbTerm for Linux with framebuffer,
+ colors#256, pairs#32767,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
+ \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
+ \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ initc=\E[3;%p1%d;%p2%d;%p3%d;%p4%d}, rmacs=\E[10m,
+ setab=\E[2;%p1%d}, setaf=\E[1;%p1%d},
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
+ %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
+ sgr0=\E[0;10m, smacs=\E[11m, use=linux,
+
# 16-color linux console entry; this works with a 256-character
# console font but bright background colors turn into dim ones when
# you use a 512-character console font. This uses bold for bright
cols#132, lines#50, use=arm100,
# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
-# manufactured by Sharp for the Japenese market.
+# manufactured by Sharp for the Japanese market.
# From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
x68k|x68k-ite|NetBSD/x68k ITE,
cols#96, lines#32,
# | | | | | | | |
# | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
# | | | 1-On | | | 1-50 Hz
-# | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
+# | | ANSI/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
# | | 1-ANSI | | 1-8 Bits
# | Keyclick 0-Off | Parity 0-Off
# | 1-On | 1-On
#
# (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
vt100|vt100-am|dec vt100 (w/advanced video),
- OTbs, am, mc5i, msgr, xenl, xon,
- cols#80, it#8, lines#24, vt#3,
+ OTbs, mc5i, xenl, xon,
+ vt#3,
+ csr=\E[%i%p1%d;%p2%dr, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
+ mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rmam=\E[?7l,
+ rmkx=\E[?1l\E>, rs2=\E<\E>\E[?3;4;5l\E[?7;8h\E[r,
+ sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
+ %;m%?%p9%t\016%e\017%;$<2>,
+ smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>,
+ use=vt100+4bsd, use=vt100+fnkeys,
+vt100+4bsd|dec vt100 from 4.0BSD,
+ am, msgr,
+ cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
- clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
- cuf=\E[%p1%dC, cuf1=\E[C$<2>,
+ clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
- kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
- lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
- rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
- rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
- rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmso=\E[m$<2>,
+ rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
%;m%?%p9%t\016%e\017%;$<2>,
- sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
- smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
- use=vt100+fnkeys,
+ sgr0=\E[m\017$<2>, smacs=^N, smso=\E[1;7m$<2>,
+ smul=\E[4m$<2>, tbc=\E[3g,
vt100nam|vt100-nam|vt100 no automargins,
am@, xenl@,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt100-am,
npc,
indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM,
rin=\E[%p1%dT, use=ansi+enq, use=xterm+pcfkeys,
- use=xterm+tmux, use=xterm-basic,
+ use=xterm+tmux, use=ecma+strikeout, use=xterm-basic,
# This fragment is for people who cannot agree on what the backspace key
# should send.
xterm-pcolor|xterm with color used for highlights and status line,
wsl#40,
bold=\E[1;43m, rev=\E[7;34m,
- sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1
- %t;7;31%;%?%p3%t;7;34%;%?%p4%t;5%;%?%p7%t;8%;m,
+ sgr=%?%p9%t\016%e\017%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1
+ %t;7;31%;%?%p3%t;7;34%;m,
smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
# This describes the capabilities of color_xterm, an xterm variant from
# GNOME terminal may automatically use the contents of the "xterm" terminfo to
# supply key information which is not built into the program. With 2.22.3,
-# this list is built into the program (which addresses the inadvertant use of
+# this list is built into the program (which addresses the inadvertent use of
# random terminfo data, though using a set of values which does not correspond
# to any that xterm produces - still not solving the problem that GNOME
# terminal hardcodes the $TERM variable as "xterm").
# xterm cursor bits.
tmux|tmux terminal multiplexer,
ritm=\E[23m, rmso=\E[27m, sitm=\E[3m, smso=\E[7m,
- use=xterm+edit, use=xterm+pcfkeys, use=xterm+sl,
- use=xterm+tmux, use=screen,
+ use=ecma+strikeout, use=xterm+edit, use=xterm+pcfkeys,
+ use=xterm+sl, use=xterm+tmux, use=screen,
tmux-256color|tmux with 256 colors,
use=xterm+256setaf, use=tmux,
# kPRV [shifted prev key] not implemented
# khome [home key] really is \E[1~ NOT \E[H
# tbc [clear tab stops] not implemented
-# xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni
+# xenl [newline ignored after 80 cols] messes up last line? Ehud Karni
# smpch [Start PC charset] is \E[11m, same as smacs
# rmpch [End PC charset] is \E[10m, same as rmacs
# mir [move in insert mode] fails in tack?
# From: Federico Bianchi
# This is the entry for the OpenNT terminal.
-# The ntconsole name is for backward compatability.
+# The ntconsole name is for backward compatibility.
# This is for OpenNT 2.0 and later.
# Later OpenNT was renamed to Interix.
#
#
# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
# moved <rmir> here from hpsub -- esr)
-hpex|hp extended capabilites,
+hpex|hp extended capabilities,
cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
# on off off Busy active on J5-19, CD disabled - Factory Set.
# on off on Busy active on J5-19, CD enabled
#
-# sw4 Used in conjuction with S4 for comm interface control - Fact 0
+# sw4 Used in conjunction with S4 for comm interface control - Fact 0
#
# sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
#
OTbs, OTpt,
OTkn#4,
if=/usr/share/tabset/vt100,
- is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100,
+ is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100+4bsd,
# (adm42: removed obsolete ":ma=^K^P:" -- esr)
adm42|lsi adm42,
OTbs, am,
# (including some with magic cookies), fancy half-duplex mode, and
# different bugs.
#
-# Some operations reqire truly incredible amounts of padding. The
+# Some operations require truly incredible amounts of padding. The
# insert_line (<il1>) and delete_line (<dl1>) operations in particular
# are so slow as to be nearly unusable.
#
ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
- use=vt100,
+ use=vt100+4bsd,
#### Wyse (wy)
#
# terminfo. At one point, I found some reference indicating that this
# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
# me), but I can't find that and the server under my bookmark to "Wyse
-# Technical" isn't responding. So there's the question of wether the wy85
-# terminfo should reflect the manufactuer's intended behaviour of the terminal
+# Technical" isn't responding. So there's the question of whether the wy85
+# terminfo should reflect the manufacturer's intended behaviour of the terminal
# or the actual."
wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
am, hs, mc5i, mir, msgr, xenl, xon,
# These entries attempt to describe Avatar, a terminal emulation used with
# MS-DOS bulletin-board systems. It was designed to give ANSI-like
# capabilities, but with cheaper (shorter) control sequences. Messy design,
-# excessively dependent on PC idiosyncracies, but apparently rather popular
+# excessively dependent on PC idiosyncrasies, but apparently rather popular
# in the BBS world.
#
# No color support. Avatar doesn't fit either of the Tektronix or HP color
# ^V^Q%c -- query the driver
# ^V^R -- driver reset
# ^V^S -- Sound tone (PC-specific)
-# ^V^T -- change highlight at current cursor poition to %c
+# ^V^T -- change highlight at current cursor position to %c
# ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
# ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
# -- define window
# Briefly, the settings are for the following modes:
# (values are for bit set/clear with * indicating our preference
# and the value used to test these termcaps)
-# Note that many of these settings are irrelevent to the terminfo
+# Note that many of these settings are irrelevant to the terminfo
# and are just set to the default mode of the terminal as shipped
# by the factory.
#
# Cursor forward FF
# Cursor home RS
# Cursor up VT
-# Cursor supress ETB
+# Cursor suppress ETB
# Cursor enable CAN
# Erase to end of line ESC,T
# Erase to end of page ESC,Y
# tset or setterm etc.) provided that the terminal has been manually set
# up (and the setup saved with ^S) to be compatible with this termcap. To be
# compatible it should be in ANSI mode (not VT52). A set-up that
-# works is to set all the manually setable stuff to factory defaults
-# by pressing ^D in set-up mode. Then increse the brighness with the
+# works is to set all the manually settable stuff to factory defaults
+# by pressing ^D in set-up mode. Then increase the brightness with the
# up-arrow key since the factory default will likely be dim on an old
# terminal. Then change any options you want (provided that they are
# compatible with the termcap). For my terminal I set: Screen
clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
kcuu1=^W, khome=^Y,
-cdc721ll|CDC Vikingll,
+cdc721ll|CDC Viking with long lines,
OTbs, am,
cols#132, lines#24,
clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
# there is no way of knowing what it is that the program wants turned
# off.
# smul: The "underline" attribute is reconfigurable to an overline or
-# strikethru, or (as done with \E[;3+} in is2=), to a line at the true
+# strike-through, or (as done with \E[;3+} in is2=), to a line at the true
# bottom of the character cell. This was done to allow for more readable
# underlined characters, and to be able to distinguish between an
# underlined space, an underscore, and an underlined underscore.
# It's not made clear in the manuals, but based on other ansi/vt type
# terminals, it's a good guess that this terminal is capable of both
# "transparent print" (which doesn't copy data to the screen, and
-# therefore needs mc5i: specified to say so) and "auxilliary print"
+# therefore needs mc5i: specified to say so) and "auxiliary print"
# (which does duplicate printed data on the screen, in which case mc4=
# and mc5= should use the \E[?4i and \E[?5i strings instead).
#
# 2 Margin Bell 0=off 1=on
# Keyclick 0=off 1=on
-# Ansi/VT52 0=VT52 1=Ansi
+# ANSI/VT52 0=VT52 1=ANSI
# Xon/Xoff 0=Off 1=On
#
# 3 Shift3 0=Hash 1=UK Pound
cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
- use=vt100,
+ use=vt100+4bsd,
# except in 132 column mode, where it needs a little padding.
# This is still less padding than the vt100, and you can always turn on
# the ^S/^Q handshaking, so you can use vt100 flavors for things like
#ctrl-A set SOM position at cursor position
#ctrl-G Bell
#ctrl-H Backspace
-#ctrl-I Horiz tab
+#ctrl-I Horizontal tab
#ctrl-J Linefeed
#ctrl-K Cursor up
#ctrl-L Cursor right
colors#8, pairs#64,
op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
use=ncr260vt300pp,
-# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
+# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
# DEC vt200/300 with color capabilities added.
ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
colors#8, pairs#64,
# 'setf' definition. The escape sequence to set color attributes is
# ESC d y <foreground_color> <background_color> 1
# In addition, the background color can be changed through the desk accessories.
-# The capablitiy 'op' sets colors to green on black (default combination).
+# The capability 'op' sets colors to green on black (default combination).
#
# NOTE: The NCR Unix System Administrator's Shell will not function properly
# if the 'pairs' capability is defined. Un-Comment the 'pairs'
is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2
\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h
\E[?8h,
- rc@, sc@, smkx=\E=, use=vt100,
+ rc@, sc@, smkx=\E=, use=vt100+4bsd,
# From: <jcoker@ucbic>
# (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
# Steve Jacobson 8/85
pcplot|pc-plot terminal emulation program,
xenl@,
- csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,
+ csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100+4bsd,
# KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
# I've found that my KayPro II, running MDM730, continues to emulate an
# ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
OTdN#30,
blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
# Lisaterm in 132 column ("wide") mode.
-mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
+mac-w|macterminal-w|Apple Macintosh with MacTerminal in 132 column mode,
cols#132, use=mac,
#### Radio Shack/Tandy
# 1. Using double-shapes for vt100 graphical chars (eg: mc).
# 2. Native brown color corrected to good yellow color.
# 3. Adding "Insert" and "Delete Line" keys as ESC Up and ESC Down arrow keys.
-# 4. Suppressed inexistant underlined mode (normally as bright).
+# 4. Suppressed nonexistent underlined mode (normally as bright).
# 5. ich/ich1 not filled because of non-curses programs.
#--
-# 6. Suppressed inexistant invisible mode.
+# 6. Suppressed nonexistent invisible mode.
#(7.)Adding forgotten "cub/cud/cuf/cuu" sequences deplacement.
linux-m1b|Linux Minitel 1B "like" Monochrome (Gris/Blanc/Noir+Dim),
# From: Alexandre Montaron, 19 Nov 2015, updated 19 Sep 2016
#
# He comments:
-# viewdata lacks a true cup capabilitie,
+# viewdata lacks a true cup capability,
# so I achieved it with home and cud1/cuf1 sequences only !
viewdata|prestel/viewdata terminals,
am, bw, eslok, hz,
# Approximate date of release was 1982 (early 80s, anyway), and it had several
# evolutions including (limited) color versions such as the PS330C. PS300s
# were effectively obsolete by the late 80s, replaced by raster graphics
-# systems, although specialized applications like molecular modelling
+# systems, although specialized applications like molecular modeling
# hung onto them for a while longer. AFAIK all E&S vector graphics systems
# are out of production, though of course E&S is very much alive (in 1996).
# (ps300: changed ":pt@:" to "it@" -- esr)
ps300|Picture System 300,
xt,
it@,
- rmso@, rmul@, smso@, smul@, use=vt100,
+ rmso@, rmul@, smso@, smul@, use=vt100+4bsd,
#### General Electric (ge)
#
# indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
# cursor, bc -> block cursor.
# From: Mike Meyers
-# (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>
+# (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> because <hts>
# looks vt100-compatible -- esr)
z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
OTbs, OTpt, am, eslok, hs, mir, msgr,
\E[11m,
sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
-z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor,
+z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyclick and underscore cursor,
rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11
m,
use=z29a,
is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11
;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s
\E\^11;81s\E\^11;89s,
- rf@, ri=\EM\E[K$<5/>, use=vt100,
+ rf@, ri=\EM\E[K$<5/>, use=vt100+4bsd,
# The GX-1000 manual is dated 1984. This looks rather like a VT-52.
modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
am, da, db,
#### Ramtek
#
# Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
-# were competition for things like the Tektronics 4025.
+# were competition for things like the Tektronix 4025.
#
# Ramtek 6221 from BRL, probably by Doug Gwyn
OTdN@, cols#80, lines#24, lm#96,
cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
- kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100,
+ kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@,
+ use=vt100+4bsd,
tab132-w|tab132 in wide mode,
cols#132,
is2=\E[?7h\E[?3h\E[?5l, use=tab132,
# Software (formerly Peripherals Computers & Supplies, Inc) of
# 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
# also be reached at support@synergy.com.
-versaterm|versaterm vt100 emulator for the macintosh,
+versaterm|versaterm vt100 emulator for the Macintosh,
am, xenl,
cols#80, it#8, lines#24,
bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@,
sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
1%;m$<2>,
- sgr0=\E[0m$<2>, smacs@, use=vt100,
+ sgr0=\E[0m$<2>, smacs@, smso=\E[7m, use=vt100+4bsd,
# These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
# coupler attached, the whole rig fitting in a suitcase and more or less
# portable. Hot stuff for c.1977 :-) -- esr
# You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
# requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
# Coded Character Sets"), include your snail-mail address, and you should
-# receive the document in due course. Don't expect an email acknowledgement.
+# receive the document in due course. Don't expect an email acknowledgment.
#
# Related standards include "X3.4-1977: American National Standard Code for
# Information Interchange" (the ASCII standard) and "X3.41.1974:
# sequences. In the main table, \E stands for an escape (\033) character,
# SPC for space. Pn stands for a single numeric parameter to be inserted
# in decimal ASCII. Ps stands for a list of such parameters separated by
-# semicolons. Parameter meanings for most parametrized sequences are
-# decribed in the notes.
+# semicolons. Parameter meanings for most parameterized sequences are
+# described in the notes.
#
# Sequence Sequence Parameter or
# Mnemonic Name Sequence Value Mode terminfo
# APC Applicatn Program Command \E _ - Delim -
# BEL Bell * ^G - - bel
# BPH Break Permitted Here * \E B - * -
-# BS Backpace * ^H - EF -
+# BS BackSpace * ^H - EF -
# CAN Cancel * ^X - - - (A)
# CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
# CCH Cancel Previous Character \E T - - -
# (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
# abbreviation.
#
-# (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
-# char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
-# 5 = clear all char tabs, 6 = clear all line tabs.
+# (F) CTC parameter values:
+# 0 = set char tab,
+# 1 = set line tab,
+# 2 = clear char tab,
+# 3 = clear line tab,
+# 4 = clear all char tabs on current line,
+# 5 = clear all char tabs,
+# 6 = clear all line tabs.
#
# (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
# HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
# (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
# abbreviation.
#
-# (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
-# later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
-# DSR, 6 = request CPR response.
+# (I) DSR parameter values:
+# 0 = ready,
+# 1 = busy,
+# 2 = busy, will send DSR later,
+# 3 = malfunction,
+# 4 = malfunction, will send DSR later,
+# 5 = request DSR,
+# 6 = request CPR response.
#
-# (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
-# 1 = clear from beginning, 2 = clear.
+# (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters:
+# 0 = clear to end,
+# 1 = clear from beginning,
+# 2 = clear.
#
# (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
#
# (N) ECMA-48 calls this "Character Tabulation" but retains the HT
# abbreviation.
#
-# (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
-# 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
-# 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
-# 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
-# 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
-# 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
-# 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
-# fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
-# fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
-# 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
-# 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
-# default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
-# overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
-# 61-65 = variable highlights for ideograms.
+# (O) SGR parameter values:
+# 0 = default mode (attributes off),
+# 1 = bold,
+# 2 = dim,
+# 3 = italicized,
+# 4 = underlined,
+# 5 = slow blink,
+# 6 = fast blink,
+# 7 = reverse video,
+# 8 = invisible,
+# 9 = crossed-out (marked for deletion),
+# 10 = primary font,
+# 10 + n (n in 1..9) = nth alternative font,
+# 20 = Fraktur,
+# 21 = double underline,
+# 22 = turn off 2,
+# 23 = turn off 3,
+# 24 = turn off 4,
+# 25 = turn off 5,
+# 26 = proportional spacing,
+# 27 = turn off 7,
+# 28 = turn off 8,
+# 29 = turn off 9,
+# 30 = black fg,
+# 31 = red fg,
+# 32 = green fg,
+# 33 = yellow fg,
+# 34 = blue fg,
+# 35 = magenta fg,
+# 36 = cyan fg,
+# 37 = white fg,
+# 38 = set fg color as in CCITT T.416,
+# 39 = set default fg color,
+# 40 = black bg
+# 41 = red bg,
+# 42 = green bg,
+# 43 = yellow bg,
+# 44 = blue bg,
+# 45 = magenta bg,
+# 46 = cyan bg,
+# 47 = white bg,
+# 48 = set bg color as in CCITT T.416,
+# 49 = set default bg color,
+# 50 = turn off 26,
+# 51 = framed,
+# 52 = encircled,
+# 53 = overlined,
+# 54 = turn off 51 & 52,
+# 55 = not overlined,
+# 56-59 = reserved,
+# 61-65 = variable highlights for ideograms.
#
# (P) SI is also called LSO, Locking Shift Zero.
#
# use CUD for this function and ignore VPR. ECMA calls it `Line Position
# Absolute' but retains the VPA abbreviation.
#
-# (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
-# primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
-# from secondary aux device, 4 = stop relay to primary aux device, 5 =
-# start relay to primary aux device, 6 = stop relay to secondary aux device,
-# 7 = start relay to secondary aux device.
+# (S) MC parameters:
+# 0 = start xfer to primary aux device,
+# 1 = start xfer from primary aux device,
+# 2 = start xfer to secondary aux device,
+# 3 = start xfer from secondary aux device,
+# 4 = stop relay to primary aux device,
+# 5 = start relay to primary aux device,
+# 6 = stop relay to secondary aux device,
+# 7 = start relay to secondary aux device.
#
# (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
# abbreviation.
#
# (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
#
-# (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM),
-# 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
-# 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
-# 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
-# Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
-# 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
-# 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
-# 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
-# Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
-# Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
-# New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
-# Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
-# from ECMA-48's 5th edition but are listed here for reference.
+# (W) RM/SM modes are as follows:
+# 1 = Guarded Area Transfer Mode (GATM),
+# 2 = Keyboard Action Mode (KAM),
+# 3 = Control Representation Mode (CRM),
+# 4 = Insertion Replacement Mode (IRM),
+# 5 = Status Report Transfer Mode (SRTM),
+# 6 = Erasure Mode (ERM),
+# 7 = Line Editing Mode (LEM),
+# 8 = Bi-Directional Support Mode (BDSM),
+# 9 = Device Component Select Mode (DCSM),
+# 10 = Character Editing Mode (HEM),
+# 11 = Positioning Unit Mode (PUM),
+# 12 = Send/Receive Mode (SRM),
+# 13 = Format Effector Action Mode (FEAM),
+# 14 = Format Effector Transfer Mode (FETM),
+# 15 = Multiple Area Transfer Mode (MATM),
+# 16 = Transfer Termination Mode (TTM),
+# 17 = Selected Area Transfer Mode (SATM),
+# 18 = Tabulation Stop Mode (TSM),
+# 19 = Editing Boundary Mode (EBM),
+# 20 = Line Feed New Line Mode (LF/NL),
+# 21 = Graphic Rendition Combination Mode (GRCM),
+# 22 = Zero Default Mode (ZDM).
+#
+# The EBM and LF/NL modes have actually been removed from ECMA-48's 5th edition
+# but are listed here for reference.
#
# (X) Select Alternate Presentation Variants is used only for non-Latin
# alphabets.
#
# There is a set of nonstandard terminfos used by IBM's AIX operating system.
# The AIX terminfo library diverged from SVr1 terminfo, and replaces all
-# capabilities following prtr_non with the following special capabilties:
+# capabilities following prtr_non with the following special capabilities:
# box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
# kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
# ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
#
# gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
# This was implemented for the Hurd.
+# rmxx/smxx describes the ECMA-48 strikeout/crossed-out attributes, as an
+# experimental feature of tmux.
# E3 clears the terminal's scrollback buffer. This was implemented in the
# Linux 3.0 kernel as a security feature. It matches a feature which was
# added in xterm patch #107.
# 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
# * Merged in DEC's official entries for its terminals. The only old
# entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
-# * Replaced the translated BBN Bitgraph entries with purpose-built
+# * Replaced the translated BBN BitGraph entries with purpose-built
# ones from AT&T's SVr3.
# * Replaced the AT&T entries with AT&T's official terminfos.
# * Added teleray 16, vc415, cops10.
# * Corrected hpa/vpa in linux entry. They still fail the worm test.
# * We can handle the HP meml/memu capability now.
# * Added smacs to klone entries, just as documentation.
-# * Carrected ansi.sys and cit-500 entries.
+# * Corrected ansi.sys and cit-500 entries.
# * Added z39, vt320-k311, v220c, and avatar entries.
# * Make pcansi use the ansi.sys invis capability.
# * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
# * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
# xterm and ncsa entries by removing the unneeded ones. Note that
# some entries will return kend & khome versus kslt and kfnd, for
-# PC-style keyboards versus strict vt220 compatiblity - TD
+# PC-style keyboards versus strict vt220 compatibility - TD
#
# 1999/3/13
# * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
#
# 2009-12-19
# * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
-# * rename minix to minix-1.7, add minix entry for Minux3 -TD
+# * rename minix to minix-1.7, add minix entry for Minix3 -TD
#
# 2009-12-26
# * add bterm (bogl 0.1.18) -TD
# + uncancel Ms in tmux entry (Harry Gindi, Nicholas Marriott).
# + add dumb-emacs-ansi -TD
#
+# 2017-03-05
+# + correct a few spelling errors in comments -TD
+# + add fbterm -TD
+#
+# 2017-03-11
+# + add vt100+4bsd building block, use that for older terminals rather
+# than "vt100" which is now mostly used as a building block for
+# terminal emulators -TD
+# + modify vt100 rs2 string to reset vt52 mode and scrolling regions
+# (report/analysis by Robert King) -TD
+#
+# 2017-04-01
+# + minor fixes for vt100+4bsd, e.g., delay in sgr for consistency -TD
+# + add smso for env230, to match sgr -TD
+# + remove p7/protect from sgr in fbterm -TD
+# + drop setf/setb from fbterm; setaf/setab are enough -TD
+# + make xterm-pcolor sgr consistent with other capabilities -TD
+# + add rmxx/smxx ECMA-48 strikeout extension to tmux and xterm-basic
+# (discussion with Nicholas Marriott)
+#
######## SHANTIH! SHANTIH! SHANTIH!
projects / openbsd / commitdiff