eval $checkccflag
;;
esac
+ case "$gccversion" in
+ 1*) ;;
+ 2*) ;;
+ ?*) echo " "
+ echo "Checking if your compiler accepts -fno-delete-null-pointer-checks" 2>&1
+ echo 'int main(void) { return 0; }' > gcctest.c
+ if $cc -O2 -fno-delete-null-pointer-checks -o gcctest gcctest.c; then
+ echo "Yes, it does." 2>&1
+ case "$ccflags" in
+ *delete-null-pointer-checks*)
+ echo "Leaving current flags $ccflags alone." 2>&1
+ ;;
+ *) dflt="$dflt -fno-delete-null-pointer-checks" ;;
+ esac
+ else
+ echo "Nope, it doesn't, but that's ok." 2>&1
+ fi
+ ;;
+ esac
# For gcc, adding -pipe speeds up compilations for some, but apparently
# some assemblers can't read from stdin. (It also slows down compilations
# in other cases, but those are apparently rarer these days.) AD 5/2004.
;;
esac
-randfunc=Perl_drand48
-drand01="Perl_drand48()"
-seedfunc="Perl_drand48_init"
+randfunc=drand48
+drand01="drand48()"
+seedfunc="srand48"
randbits=48
randseedtype=U32
find_extensions='
for xxx in *; do
case "$xxx" in
+ CVS) ;;
DynaLoader|dynaload) ;;
*)
this_ext=`echo "$xxx" | $sed -e s/-/\\\//g`;
nonxs_ext=''
for xxx in $nonxs_extensions ; do
case "$xxx" in
+ CVS|RCS|SCCS|.svn)
+ ;;
VMS*)
;;
*) nonxs_ext="$nonxs_ext $xxx"
cflags.SH A script that emits C compilation flags per file
Changes Describe how to peruse changes between releases
charclass_invlists.h Compiled-in inversion lists
+config.over Site-specific overrides for Configure defaults
config_h.SH Produces config.h
configpm Produces lib/Config.pm
Configure Portability tool
cpan/NEXT/t/next.t NEXT
cpan/NEXT/t/stringify.t NEXT
cpan/NEXT/t/unseen.t NEXT
+cpan/OpenBSD-MkTemp/lib/OpenBSD/MkTemp.pm OpenBSD::MkTemp
+cpan/OpenBSD-MkTemp/MkTemp.xs OpenBSD::MkTemp
+cpan/OpenBSD-MkTemp/README OpenBSD::MkTemp Readme
+cpan/OpenBSD-MkTemp/t/OpenBSD-MkTemp.t OpenBSD::MkTemp test file
+cpan/OpenBSD-Pledge/lib/OpenBSD/Pledge.pm OpenBSD::Pledge
+cpan/OpenBSD-Pledge/Pledge.xs OpenBSD::Pledge
+cpan/OpenBSD-Pledge/t/OpenBSD-Pledge.t OpenBSD::Pledge test file
+cpan/OpenBSD-Unveil/lib/OpenBSD/Unveil.pm OpenBSD::Unveil
+cpan/OpenBSD-Unveil/t/OpenBSD-Unveil.t OpenBSD::Unveil test file
+cpan/OpenBSD-Unveil/Unveil.xs OpenBSD::Unveil
cpan/Params-Check/lib/Params/Check.pm Params::Check
cpan/Params-Check/t/01_Params-Check.t Params::Check tests
cpan/parent/lib/parent.pm Establish an ISA relationship with base classes at compile time
cpan/Term-ANSIColor/t/taint/basic.t
cpan/Term-Cap/Cap.pm Perl module supporting termcap usage
cpan/Term-Cap/test.pl See if Term::Cap works
+cpan/Term-ReadKey/Changes Term::ReadKey
+cpan/Term-ReadKey/Configure.pm Term::ReadKey
+cpan/Term-ReadKey/example/test.pl Term::ReadKey
+cpan/Term-ReadKey/genchars.pl Term::ReadKey
+cpan/Term-ReadKey/Makefile.PL Term::ReadKey
+cpan/Term-ReadKey/ppport.h Term::ReadKey
+cpan/Term-ReadKey/ReadKey.xs Term::ReadKey
+cpan/Term-ReadKey/ReadKey.pm.PL Term::ReadKey
+cpan/Term-ReadKey/README Term::ReadKey
+cpan/Term-ReadKey/t/01_basic.t Term::ReadKey
+cpan/Term-ReadKey/t/02_terminal_functions.t Term::ReadKey
cpan/Test-Harness/bin/prove The prove harness utility
cpan/Test-Harness/lib/App/Prove.pm Gubbins for the prove utility
cpan/Test-Harness/lib/App/Prove/State.pm Gubbins for the prove utility
ext/B/B/Terse.pm Compiler Terse backend
ext/B/B/Xref.pm Compiler Xref backend
ext/B/hints/darwin.pl Hints for named architecture
-ext/B/hints/openbsd.pl Hints for named architecture
ext/B/Makefile.PL Compiler backend makefile writer
ext/B/O.pm Compiler front-end module (-MO=...)
ext/B/t/b.t See if B works
feature.h Feature header
form.h Public declarations for formats
generate_uudmap.c Generate uudmap.h, the uuencode decoding map
+git_version.h Pre-generated git_version.h for OpenBSD
globals.c File to declare global symbols (for shared library)
globvar.sym Global variables that need hiding when embedded
gv.c Glob value code
lib/Config.t See if Config works
lib/Config/Extensions.pm Convenient hash lookup for built extensions
lib/Config/Extensions.t See if Config::Extensions works
+lib/Config_git.pl Pre-generated Config_git.pl for OpenBSD
lib/CORE.pod document the CORE namespace
lib/DB.pm Debugger API (draft)
lib/DB.t See if DB works
cpan/Pod-Simple/pm_to_blib: dist/if/pm_to_blib
ext/Pod-Functions/pm_to_blib: cpan/Pod-Simple/pm_to_blib cpan/Pod-Escapes/pm_to_blib pod/perlfunc.pod
cpan/IO-Compress/pm_to_blib: dist/lib/pm_to_blib
+lib/auto/Term/ReadKey/ReadKey.so: lib/auto/Cwd/Cwd.so
'
for f in $dynamic_ext; do
: the dependency named here will never exist
## In the following dollars and backticks do not need the extra backslash.
$spitshell >>$Makefile <<!GROK!THIS!
-private = preplibrary \$(CONFIGPM) \$(CONFIGPOD) git_version.h lib/buildcustomize.pl
+private = preplibrary \$(CONFIGPM) \$(CONFIGPOD) lib/buildcustomize.pl
# Files to be built with variable substitution before miniperl
# is available.
.PHONY: all utilities
+# OpenBSD uses pre-generated lib/Config_git.pl and git_version.h files
# Both git_version.h and lib/Config_git.pl are built
# by make_patchnum.pl.
-git_version.h: lib/Config_git.pl
-
-lib/Config_git.pl: $(MINIPERL_EXE) make_patchnum.pl
- $(MINIPERL) make_patchnum.pl
-
-# make sure that we recompile perl.c if the git version changes
-perl$(OBJ_EXT): git_version.h
+#git_version.h: lib/Config_git.pl
+#
+#lib/Config_git.pl: $(MINIPERL_EXE) make_patchnum.pl
+# $(MINIPERL) make_patchnum.pl
+#
+## make sure that we recompile perl.c if the git version changes
+#perl$(OBJ_EXT): git_version.h
!NO!SUBS!
unidatafiles $(unidatafiles) pod/perluniprops.pod: uni.data
uni.data: $(MINIPERL_EXE) $(CONFIGPM) lib/unicore/mktables $(nonxs_ext)
- $(MINIPERL) lib/unicore/mktables -C lib/unicore -P pod -maketest -makelist -p
-# Commented out so always runs, mktables looks at far more files than we
-# can in this makefile to decide if needs to run or not
-# touch uni.data
+ touch uni.data
# $(PERL_EXE) and ext because pod_lib.pl needs Digest::MD5
# But also this ensures that all extensions are built before we try to scan
-rm -f *perl.xok
-rm -f cygwin.c libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump
-rm -f $(PERL_EXE) $(MINIPERL_EXE) $(LIBPERL) libperl.* microperl
- -rm -f config.arch config.over $(DTRACE_H)
+ -rm -f $(DTRACE_H)
_cleaner1:
-cd os2; rm -f Makefile
-rmdir lib/Sys/Syslog lib/Sys lib/Sub lib/Search lib/Scalar
-rmdir lib/Pod/Text lib/Pod/Simple lib/Pod/Perldoc lib/PerlIO/via
-rmdir lib/PerlIO lib/Perl lib/Parse/CPAN lib/Parse lib/Params
- -rmdir lib/Net/FTP lib/Module/Load lib/Module/CoreList lib/Module
- -rmdir lib/Memoize lib/Math/BigInt lib/Math/BigFloat lib/Math lib/MIME
- -rmdir lib/Locale/Maketext lib/Locale lib/List/Util lib/List
- -rmdir lib/JSON/PP lib/JSON lib/IPC lib/IO/Uncompress/Adapter
+ -rmdir lib/OpenBSD lib/Net/FTP lib/Module/Load lib/Module/CoreList
+ -rmdir lib/Module lib/Memoize lib/Math/BigInt lib/Math/BigFloat
+ -rmdir lib/Math lib/MIME lib/Locale/Maketext lib/Locale lib/List/Util
+ -rmdir lib/List lib/JSON/PP lib/JSON lib/IPC lib/IO/Uncompress/Adapter
-rmdir lib/IO/Uncompress lib/IO/Socket lib/IO/Compress/Zlib
-rmdir lib/IO/Compress/Zip lib/IO/Compress/Gzip lib/IO/Compress/Base
-rmdir lib/IO/Compress/Adapter lib/IO/Compress lib/IO
perl5280delta 1 pod/perl5280delta.pod \
perl5281delta 1 pod/perl5281delta.pod \
perl5282delta 1 pod/perl5282delta.pod \
+ perl5283delta 1 pod/perl5283delta.pod \
perl5300delta 1 pod/perl5300delta.pod \
perl5301delta 1 pod/perl5301delta.pod \
perl5302delta 1 pod/perl5302delta.pod \
perl5303delta 1 pod/perl5303delta.pod \
+ perl5320delta 1 pod/perl5320delta.pod \
+ perl5321delta 1 pod/perl5321delta.pod \
perl561delta 1 pod/perl561delta.pod \
perl56delta 1 pod/perl56delta.pod \
perl581delta 1 pod/perl581delta.pod \
perlfunc 1 pod/perlfunc.pod \
perlgit 1 pod/perlgit.pod \
perlglossary 1 lib/perlglossary.pod \
+ perlgov 1 pod/perlgov.pod \
perlguts 1 pod/perlguts.pod \
perlhack 1 pod/perlhack.pod \
perlhacktips 1 pod/perlhacktips.pod \
perlretut 1 pod/perlretut.pod \
perlrun 1 pod/perlrun.pod \
perlsec 1 pod/perlsec.pod \
+ perlsecpolicy 1 pod/perlsecpolicy.pod \
perlsource 1 pod/perlsource.pod \
perlstyle 1 pod/perlstyle.pod \
perlsub 1 pod/perlsub.pod \
pod2text 1 cpan/podlators/blib/script/pod2text \
pod2usage 1 cpan/Pod-Usage/blib/script/pod2usage \
podchecker 1 cpan/Pod-Checker/blib/script/podchecker \
- podselect 1 cpan/Pod-Parser/blib/script/podselect \
prove 1 utils/prove \
splain 1 utils/splain \
- xsubpp 1 utils/xsubpp \
+ streamzip 1 utils/streamzip \
+ xsubpp 1 lib/ExtUtils/xsubpp \
AnyDBM_File 3p lib/AnyDBM_File.pm \
App::Cpan 3p lib/App/Cpan.pm \
App::Prove 3p lib/App/Prove.pm \
PerlIO::via::QuotedPrint 3p lib/PerlIO/via/QuotedPrint.pm \
Pod::Checker 3p lib/Pod/Checker.pm \
Pod::Escapes 3p lib/Pod/Escapes.pm \
- Pod::Find 3p lib/Pod/Find.pm \
Pod::Functions 3p lib/Pod/Functions.pm \
Pod::Html 3p lib/Pod/Html.pm \
- Pod::InputObjects 3p lib/Pod/InputObjects.pm \
Pod::Man 3p lib/Pod/Man.pm \
Pod::ParseLink 3p lib/Pod/ParseLink.pm \
- Pod::Parser 3p lib/Pod/Parser.pm \
- Pod::ParseUtils 3p lib/Pod/ParseUtils.pm \
Pod::Perldoc 3p lib/Pod/Perldoc.pm \
Pod::Perldoc::BaseTo 3p lib/Pod/Perldoc/BaseTo.pm \
Pod::Perldoc::GetOptsOO 3p lib/Pod/Perldoc/GetOptsOO.pm \
Pod::Perldoc::ToText 3p lib/Pod/Perldoc/ToText.pm \
Pod::Perldoc::ToTk 3p lib/Pod/Perldoc/ToTk.pm \
Pod::Perldoc::ToXml 3p lib/Pod/Perldoc/ToXml.pm \
- Pod::PlainText 3p lib/Pod/PlainText.pm \
- Pod::Select 3p lib/Pod/Select.pm \
Pod::Simple 3p lib/Pod/Simple.pod \
Pod::Simple::Checker 3p lib/Pod/Simple/Checker.pm \
Pod::Simple::Debug 3p lib/Pod/Simple/Debug.pm \
Pod::Simple::DumpAsXML 3p lib/Pod/Simple/DumpAsXML.pm \
Pod::Simple::HTML 3p lib/Pod/Simple/HTML.pm \
Pod::Simple::HTMLBatch 3p lib/Pod/Simple/HTMLBatch.pm \
+ Pod::Simple::JustPod 3p lib/Pod/Simple/JustPod.pm \
Pod::Simple::LinkSection 3p lib/Pod/Simple/LinkSection.pm \
Pod::Simple::Methody 3p lib/Pod/Simple/Methody.pm \
Pod::Simple::PullParser 3p lib/Pod/Simple/PullParser.pm \
lib/vmsish.{pm,t}
],
},
+ 'openbsd' => {
+ 'FILES' => q[lib/Config_git.pl],
+ },
);
# legacy CPAN flag
5.004_07 to 5.004_08 patch as an example.
# unpack perl5.004_07/
- gzip -d -c perl5.004_07.tar.gz | tar -xof -
+ gzip -d -c perl5.004_07.tar.gz | tar -xf -
# unpack perl5.004_08/
- gzip -d -c perl5.004_08.tar.gz | tar -xof -
+ gzip -d -c perl5.004_08.tar.gz | tar -xf -
makepatch perl5.004_07 perl5.004_08 > perl5.004_08.pat
Makepatch will automatically generate appropriate B<rm> commands to remove
}
if ($orig_config_txt ne $config_txt or $orig_heavy_txt ne $heavy_txt) {
+ # During the build don't look in /usr/local for libs or includes
+ # but after, we want to let modules look there.
+ my $install_heavy_txt = $heavy_txt;
+ $install_heavy_txt =~ s,^(ccflags|cppflags)[^=]*='[^']+,$& -I/usr/local/include,gm;
+ $install_heavy_txt =~ s,^(ldflags|lddlflags)[^=]*='[^']+,$& -L/usr/local/lib,gm;
+
+ open INSTALL_CONFIG_HEAVY, ">", "$Config_heavy.install"
+ or die "Can't open install $Config_heavy: $!\n";
+ print INSTALL_CONFIG_HEAVY $install_heavy_txt;
+ close INSTALL_CONFIG_HEAVY;
+ print "updated install $Config_heavy\n";
+
open CONFIG, ">", $Config_PM or die "Can't open $Config_PM: $!\n";
open CONFIG_HEAVY, ">", $Config_heavy or die "Can't open $Config_heavy: $!\n";
print CONFIG $config_txt;
my $path = shift;
return undef
- if $path =~ /(~|\.bak|_bak)$/ ||
+ if $path =~ /^(?:RCS|CVS|SCCS|\.svn|_darcs)$/ ||
+ $path =~ /(~|\.bak|_bak)$/ ||
$path =~ /\..*\.sw(o|p)$/ ||
$path =~ /\B\.svn\b/;
my $path = shift;
return undef
- if $path =~ /(~|\.bak|_bak)$/ ||
+ if $path =~ /^(?:RCS|CVS|SCCS|\.svn|_darcs)$/ ||
+ $path =~ /(~|\.bak|_bak)$/ ||
$path =~ /\..*\.sw(o|p)$/ ||
$path =~ /\B\.svn\b/;
#include "EXTERN.h"
#include "perl.h"
#include "XSUB.h"
+#include <sys/types.h>
+#include <md5.h>
#ifdef __cplusplus
}
#endif
# define SvPVbyte(sv, lp) (sv_utf8_downgrade((sv), 0), SvPV((sv), (lp)))
#endif
-/* Perl does not guarantee that U32 is exactly 32 bits. Some system
- * has no integral type with exactly 32 bits. For instance, A Cray has
- * short, int and long all at 64 bits so we need to apply this macro
- * to reduce U32 values to 32 bits at appropriate places. If U32
- * really does have 32 bits then this is a no-op.
- */
-#if BYTEORDER > 0x4321 || defined(TRUNCATE_U32)
- #define TO32(x) ((x) & 0xFFFFffff)
- #define TRUNC32(x) ((x) &= 0xFFFFffff)
-#else
- #define TO32(x) (x)
- #define TRUNC32(x) /*nothing*/
-#endif
-
-/* The MD5 algorithm is defined in terms of little endian 32-bit
- * values. The following macros (and functions) allow us to convert
- * between native integers and such values.
- */
-static void u2s(U32 u, U8* s)
-{
- *s++ = (U8)(u & 0xFF);
- *s++ = (U8)((u >> 8) & 0xFF);
- *s++ = (U8)((u >> 16) & 0xFF);
- *s = (U8)((u >> 24) & 0xFF);
-}
-
-#define s2u(s,u) ((u) = (U32)(*s) | \
- ((U32)(*(s+1)) << 8) | \
- ((U32)(*(s+2)) << 16) | \
- ((U32)(*(s+3)) << 24))
-
-/* This structure keeps the current state of algorithm.
- */
-typedef struct {
- U32 A, B, C, D; /* current digest */
- U32 bytes_low; /* counts bytes in message */
- U32 bytes_high; /* turn it into a 64-bit counter */
- U8 buffer[128]; /* collect complete 64 byte blocks */
-} MD5_CTX;
-
#if defined(USE_ITHREADS) && defined(MGf_DUP)
STATIC int dup_md5_ctx(pTHX_ MAGIC *mg, CLONE_PARAMS *params)
{
};
#endif
-
-/* Padding is added at the end of the message in order to fill a
- * complete 64 byte block (- 8 bytes for the message length). The
- * padding is also the reason the buffer in MD5_CTX have to be
- * 128 bytes.
- */
-static const unsigned char PADDING[64] = {
- 0x80, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
-};
-
-/* Constants for MD5Transform routine.
- */
-#define S11 7
-#define S12 12
-#define S13 17
-#define S14 22
-#define S21 5
-#define S22 9
-#define S23 14
-#define S24 20
-#define S31 4
-#define S32 11
-#define S33 16
-#define S34 23
-#define S41 6
-#define S42 10
-#define S43 15
-#define S44 21
-
-/* F, G, H and I are basic MD5 functions.
- */
-#define F(x, y, z) ((((x) & ((y) ^ (z))) ^ (z)))
-#define G(x, y, z) F(z, x, y)
-#define H(x, y, z) ((x) ^ (y) ^ (z))
-#define I(x, y, z) ((y) ^ ((x) | (~z)))
-
-/* ROTATE_LEFT rotates x left n bits.
- */
-#define ROTATE_LEFT(x, n) (((x) << (n) | ((x) >> (32-(n)))))
-
-/* FF, GG, HH, and II transformations for rounds 1, 2, 3, and 4.
- * Rotation is separate from addition to prevent recomputation.
- */
-#define FF(a, b, c, d, s, ac) \
- (a) += F ((b), (c), (d)) + (NEXTx) + (U32)(ac); \
- TRUNC32((a)); \
- (a) = ROTATE_LEFT ((a), (s)); \
- (a) += (b); \
- TRUNC32((a));
-
-#define GG(a, b, c, d, x, s, ac) \
- (a) += G ((b), (c), (d)) + X[x] + (U32)(ac); \
- TRUNC32((a)); \
- (a) = ROTATE_LEFT ((a), (s)); \
- (a) += (b); \
- TRUNC32((a));
-
-#define HH(a, b, c, d, x, s, ac) \
- (a) += H ((b), (c), (d)) + X[x] + (U32)(ac); \
- TRUNC32((a)); \
- (a) = ROTATE_LEFT ((a), (s)); \
- (a) += (b); \
- TRUNC32((a));
-
-#define II(a, b, c, d, x, s, ac) \
- (a) += I ((b), (c), (d)) + X[x] + (U32)(ac); \
- TRUNC32((a)); \
- (a) = ROTATE_LEFT ((a), (s)); \
- (a) += (b); \
- TRUNC32((a));
-
-
-static void
-MD5Init(MD5_CTX *ctx)
-{
- /* Start state */
- ctx->A = 0x67452301;
- ctx->B = 0xefcdab89;
- ctx->C = 0x98badcfe;
- ctx->D = 0x10325476;
-
- /* message length */
- ctx->bytes_low = ctx->bytes_high = 0;
-}
-
-
-static void
-MD5Transform(MD5_CTX* ctx, const U8* buf, STRLEN blocks)
-{
-#ifdef MD5_DEBUG
- static int tcount = 0;
-#endif
-
- U32 A = ctx->A;
- U32 B = ctx->B;
- U32 C = ctx->C;
- U32 D = ctx->D;
-
- do {
- U32 a = A;
- U32 b = B;
- U32 c = C;
- U32 d = D;
-
- U32 X[16]; /* little-endian values, used in round 2-4 */
- U32 *uptr = X;
- U32 tmp;
- #define NEXTx (s2u(buf,tmp), buf += 4, *uptr++ = tmp)
-
-#ifdef MD5_DEBUG
- if (buf == ctx->buffer)
- fprintf(stderr,"%5d: Transform ctx->buffer", ++tcount);
- else
- fprintf(stderr,"%5d: Transform %p (%d)", ++tcount, buf, blocks);
-
- {
- int i;
- fprintf(stderr,"[");
- for (i = 0; i < 16; i++) {
- fprintf(stderr,"%x,", x[i]); /* FIXME */
- }
- fprintf(stderr,"]\n");
- }
-#endif
-
- /* Round 1 */
- FF (a, b, c, d, S11, 0xd76aa478); /* 1 */
- FF (d, a, b, c, S12, 0xe8c7b756); /* 2 */
- FF (c, d, a, b, S13, 0x242070db); /* 3 */
- FF (b, c, d, a, S14, 0xc1bdceee); /* 4 */
- FF (a, b, c, d, S11, 0xf57c0faf); /* 5 */
- FF (d, a, b, c, S12, 0x4787c62a); /* 6 */
- FF (c, d, a, b, S13, 0xa8304613); /* 7 */
- FF (b, c, d, a, S14, 0xfd469501); /* 8 */
- FF (a, b, c, d, S11, 0x698098d8); /* 9 */
- FF (d, a, b, c, S12, 0x8b44f7af); /* 10 */
- FF (c, d, a, b, S13, 0xffff5bb1); /* 11 */
- FF (b, c, d, a, S14, 0x895cd7be); /* 12 */
- FF (a, b, c, d, S11, 0x6b901122); /* 13 */
- FF (d, a, b, c, S12, 0xfd987193); /* 14 */
- FF (c, d, a, b, S13, 0xa679438e); /* 15 */
- FF (b, c, d, a, S14, 0x49b40821); /* 16 */
-
- /* Round 2 */
- GG (a, b, c, d, 1, S21, 0xf61e2562); /* 17 */
- GG (d, a, b, c, 6, S22, 0xc040b340); /* 18 */
- GG (c, d, a, b, 11, S23, 0x265e5a51); /* 19 */
- GG (b, c, d, a, 0, S24, 0xe9b6c7aa); /* 20 */
- GG (a, b, c, d, 5, S21, 0xd62f105d); /* 21 */
- GG (d, a, b, c, 10, S22, 0x2441453); /* 22 */
- GG (c, d, a, b, 15, S23, 0xd8a1e681); /* 23 */
- GG (b, c, d, a, 4, S24, 0xe7d3fbc8); /* 24 */
- GG (a, b, c, d, 9, S21, 0x21e1cde6); /* 25 */
- GG (d, a, b, c, 14, S22, 0xc33707d6); /* 26 */
- GG (c, d, a, b, 3, S23, 0xf4d50d87); /* 27 */
- GG (b, c, d, a, 8, S24, 0x455a14ed); /* 28 */
- GG (a, b, c, d, 13, S21, 0xa9e3e905); /* 29 */
- GG (d, a, b, c, 2, S22, 0xfcefa3f8); /* 30 */
- GG (c, d, a, b, 7, S23, 0x676f02d9); /* 31 */
- GG (b, c, d, a, 12, S24, 0x8d2a4c8a); /* 32 */
-
- /* Round 3 */
- HH (a, b, c, d, 5, S31, 0xfffa3942); /* 33 */
- HH (d, a, b, c, 8, S32, 0x8771f681); /* 34 */
- HH (c, d, a, b, 11, S33, 0x6d9d6122); /* 35 */
- HH (b, c, d, a, 14, S34, 0xfde5380c); /* 36 */
- HH (a, b, c, d, 1, S31, 0xa4beea44); /* 37 */
- HH (d, a, b, c, 4, S32, 0x4bdecfa9); /* 38 */
- HH (c, d, a, b, 7, S33, 0xf6bb4b60); /* 39 */
- HH (b, c, d, a, 10, S34, 0xbebfbc70); /* 40 */
- HH (a, b, c, d, 13, S31, 0x289b7ec6); /* 41 */
- HH (d, a, b, c, 0, S32, 0xeaa127fa); /* 42 */
- HH (c, d, a, b, 3, S33, 0xd4ef3085); /* 43 */
- HH (b, c, d, a, 6, S34, 0x4881d05); /* 44 */
- HH (a, b, c, d, 9, S31, 0xd9d4d039); /* 45 */
- HH (d, a, b, c, 12, S32, 0xe6db99e5); /* 46 */
- HH (c, d, a, b, 15, S33, 0x1fa27cf8); /* 47 */
- HH (b, c, d, a, 2, S34, 0xc4ac5665); /* 48 */
-
- /* Round 4 */
- II (a, b, c, d, 0, S41, 0xf4292244); /* 49 */
- II (d, a, b, c, 7, S42, 0x432aff97); /* 50 */
- II (c, d, a, b, 14, S43, 0xab9423a7); /* 51 */
- II (b, c, d, a, 5, S44, 0xfc93a039); /* 52 */
- II (a, b, c, d, 12, S41, 0x655b59c3); /* 53 */
- II (d, a, b, c, 3, S42, 0x8f0ccc92); /* 54 */
- II (c, d, a, b, 10, S43, 0xffeff47d); /* 55 */
- II (b, c, d, a, 1, S44, 0x85845dd1); /* 56 */
- II (a, b, c, d, 8, S41, 0x6fa87e4f); /* 57 */
- II (d, a, b, c, 15, S42, 0xfe2ce6e0); /* 58 */
- II (c, d, a, b, 6, S43, 0xa3014314); /* 59 */
- II (b, c, d, a, 13, S44, 0x4e0811a1); /* 60 */
- II (a, b, c, d, 4, S41, 0xf7537e82); /* 61 */
- II (d, a, b, c, 11, S42, 0xbd3af235); /* 62 */
- II (c, d, a, b, 2, S43, 0x2ad7d2bb); /* 63 */
- II (b, c, d, a, 9, S44, 0xeb86d391); /* 64 */
-
- A += a; TRUNC32(A);
- B += b; TRUNC32(B);
- C += c; TRUNC32(C);
- D += d; TRUNC32(D);
-
- } while (--blocks);
- ctx->A = A;
- ctx->B = B;
- ctx->C = C;
- ctx->D = D;
-}
-
-
-#ifdef MD5_DEBUG
-static char*
-ctx_dump(MD5_CTX* ctx)
-{
- static char buf[1024];
- sprintf(buf, "{A=%x,B=%x,C=%x,D=%x,%d,%d(%d)}",
- ctx->A, ctx->B, ctx->C, ctx->D,
- ctx->bytes_low, ctx->bytes_high, (ctx->bytes_low&0x3F));
- return buf;
-}
-#endif
-
-
-static void
-MD5Update(MD5_CTX* ctx, const U8* buf, STRLEN len)
-{
- STRLEN blocks;
- STRLEN fill = ctx->bytes_low & 0x3F;
-
-#ifdef MD5_DEBUG
- static int ucount = 0;
- fprintf(stderr,"%5i: Update(%s, %p, %d)\n", ++ucount, ctx_dump(ctx),
- buf, len);
-#endif
-
- ctx->bytes_low += len;
- if (ctx->bytes_low < len) /* wrap around */
- ctx->bytes_high++;
-
- if (fill) {
- STRLEN missing = 64 - fill;
- if (len < missing) {
- Copy(buf, ctx->buffer + fill, len, U8);
- return;
- }
- Copy(buf, ctx->buffer + fill, missing, U8);
- MD5Transform(ctx, ctx->buffer, 1);
- buf += missing;
- len -= missing;
- }
-
- blocks = len >> 6;
- if (blocks)
- MD5Transform(ctx, buf, blocks);
- if ( (len &= 0x3F)) {
- Copy(buf + (blocks << 6), ctx->buffer, len, U8);
- }
-}
-
-
-static void
-MD5Final(U8* digest, MD5_CTX *ctx)
-{
- STRLEN fill = ctx->bytes_low & 0x3F;
- STRLEN padlen = (fill < 56 ? 56 : 120) - fill;
- U32 bits_low, bits_high;
-#ifdef MD5_DEBUG
- fprintf(stderr," Final: %s\n", ctx_dump(ctx));
-#endif
- Copy(PADDING, ctx->buffer + fill, padlen, U8);
- fill += padlen;
-
- bits_low = ctx->bytes_low << 3;
- bits_high = (ctx->bytes_high << 3) | (ctx->bytes_low >> 29);
- u2s(bits_low, ctx->buffer + fill); fill += 4;
- u2s(bits_high, ctx->buffer + fill); fill += 4;
-
- MD5Transform(ctx, ctx->buffer, fill >> 6);
-#ifdef MD5_DEBUG
- fprintf(stderr," Result: %s\n", ctx_dump(ctx));
-#endif
-
- u2s(ctx->A, digest);
- u2s(ctx->B, digest+4);
- u2s(ctx->C, digest+8);
- u2s(ctx->D, digest+12);
-}
-
-#ifndef INT2PTR
-#define INT2PTR(any,d) (any)(d)
-#endif
-
static MD5_CTX* get_md5_ctx(pTHX_ SV* sv)
{
MAGIC *mg;
InputStream fh
PREINIT:
MD5_CTX* context = get_md5_ctx(aTHX_ self);
- STRLEN fill = context->bytes_low & 0x3F;
+ STRLEN fill = (context->count >> 3) & (MD5_BLOCK_LENGTH - 1);
#ifdef USE_HEAP_INSTEAD_OF_STACK
unsigned char* buffer;
#else
PPCODE:
if (items > 2) {
STRLEN len;
- unsigned long blocks = SvUV(ST(1));
+ ctx->count = SvUV(ST(1)) << 3;
unsigned char *buf = (unsigned char *)(SvPV(ST(2), len));
- ctx->A = buf[ 0] | (buf[ 1]<<8) | (buf[ 2]<<16) | (buf[ 3]<<24);
- ctx->B = buf[ 4] | (buf[ 5]<<8) | (buf[ 6]<<16) | (buf[ 7]<<24);
- ctx->C = buf[ 8] | (buf[ 9]<<8) | (buf[10]<<16) | (buf[11]<<24);
- ctx->D = buf[12] | (buf[13]<<8) | (buf[14]<<16) | (buf[15]<<24);
- ctx->bytes_low = blocks << 6;
- ctx->bytes_high = blocks >> 26;
+ ctx->state[0] = buf[ 0] | (buf[ 1]<<8) | (buf[ 2]<<16) | (buf[ 3]<<24);
+ ctx->state[1] = buf[ 4] | (buf[ 5]<<8) | (buf[ 6]<<16) | (buf[ 7]<<24);
+ ctx->state[2] = buf[ 8] | (buf[ 9]<<8) | (buf[10]<<16) | (buf[11]<<24);
+ ctx->state[3] = buf[12] | (buf[13]<<8) | (buf[14]<<16) | (buf[15]<<24);
if (items == 4) {
buf = (unsigned char *)(SvPV(ST(3), len));
MD5Update(ctx, buf, len);
XSRETURN(0);
}
- w=ctx->A; out[ 0]=w; out[ 1]=(w>>8); out[ 2]=(w>>16); out[ 3]=(w>>24);
- w=ctx->B; out[ 4]=w; out[ 5]=(w>>8); out[ 6]=(w>>16); out[ 7]=(w>>24);
- w=ctx->C; out[ 8]=w; out[ 9]=(w>>8); out[10]=(w>>16); out[11]=(w>>24);
- w=ctx->D; out[12]=w; out[13]=(w>>8); out[14]=(w>>16); out[15]=(w>>24);
+ w=ctx->state[0]; out[ 0]=w; out[ 1]=(w>>8); out[ 2]=(w>>16); out[ 3]=(w>>24);
+ w=ctx->state[1]; out[ 4]=w; out[ 5]=(w>>8); out[ 6]=(w>>16); out[ 7]=(w>>24);
+ w=ctx->state[2]; out[ 8]=w; out[ 9]=(w>>8); out[10]=(w>>16); out[11]=(w>>24);
+ w=ctx->state[3]; out[12]=w; out[13]=(w>>8); out[14]=(w>>16); out[15]=(w>>24);
EXTEND(SP, 3);
- ST(0) = sv_2mortal(newSVuv(ctx->bytes_high << 26 |
- ctx->bytes_low >> 6));
+ ST(0) = sv_2mortal(newSViv((ctx->count >> 3)
+ - ((ctx->count >> 3) % MD5_BLOCK_LENGTH)));
ST(1) = sv_2mortal(newSVpv(out, 16));
- ST(2) = sv_2mortal(newSVpv((char *)ctx->buffer,
- ctx->bytes_low & 0x3F));
+ ST(2) = sv_2mortal(newSVpv("",0));
+ if (((ctx->count >> 3) & (MD5_BLOCK_LENGTH - 1)) != 0)
+ ST(2) = sv_2mortal(newSVpv((char *)ctx->buffer,
+ (ctx->count >> 3) & (MD5_BLOCK_LENGTH - 1)));
+
XSRETURN(3);
void
# This is the output of: 'md5sum README MD5.xs rfc1321.txt'
$EXPECT = <<EOT;
2f93400875dbb56f36691d5f69f3eba5 README
-5b8b4f96bc27a425501307c5461970db MD5.xs
+641f5e20d5d53222c50ba99fbddabd15 MD5.xs
754b9db19f79dbc4992f7166eb0f37ce rfc1321.txt
EOT
}
$ENV{MAKEFLAGS} =~ /\b(s|silent|quiet)\b/);
my $Curdir = File::Spec->curdir;
+my $Perm_Dir = $ENV{PERL_CORE} ? 0770 : 0755;
sub _estr(@) {
return join "\n",'!' x 72,@_,'!' x 72,'';
_chdir($cwd);
}
foreach my $targetdir (sort keys %check_dirs) {
- _mkpath( $targetdir, 0, 0755, $verbose, $dry_run );
+ _mkpath( $targetdir, 0, $Perm_Dir, $verbose, $dry_run );
}
foreach my $found (@found_files) {
my ($diff, $ffd, $origfile, $mode, $size, $atime, $mtime,
$targetfile= _unlink_or_rename( $targetfile, 'tryhard', 'install' )
unless $dry_run;
} elsif ( ! -d $targetdir ) {
- _mkpath( $targetdir, 0, 0755, $verbose, $dry_run );
+ _mkpath( $targetdir, 0, $Perm_Dir, $verbose, $dry_run );
}
print "Installing $targetfile\n";
if ($pack{'write'}) {
$dir = install_rooted_dir(dirname($pack{'write'}));
- _mkpath( $dir, 0, 0755, $verbose, $dry_run );
+ _mkpath( $dir, 0, $Perm_Dir, $verbose, $dry_run );
print "Writing $pack{'write'}\n" if $verbose;
$packlist->write(install_rooted_file($pack{'write'})) unless $dry_run;
}
sub pm_to_blib {
my($fromto,$autodir,$pm_filter) = @_;
- _mkpath($autodir,0,0755) if defined $autodir;
+ _mkpath($autodir,0,$Perm_Dir) if defined $autodir;
while(my($from, $to) = each %$fromto) {
if( -f $to && -s $from == -s $to && -M $to < -M $from ) {
print "Skip $to (unchanged)\n" unless $INSTALL_QUIET;
# we wont try hard here. its too likely to mess things up.
forceunlink($to);
} else {
- _mkpath(dirname($to),0,0755);
+ _mkpath(dirname($to),0,$Perm_Dir);
}
if ($need_filtering) {
run_filter($pm_filter, $from, $to);
sub init_PERM {
my($self) = shift;
- $self->{PERM_DIR} = 755 unless defined $self->{PERM_DIR};
+ my $perm_dir = $self->{PERL_CORE} ? 770 : 755;
+ $self->{PERM_DIR} = $perm_dir unless defined $self->{PERM_DIR};
$self->{PERM_RW} = 644 unless defined $self->{PERM_RW};
$self->{PERM_RWX} = 755 unless defined $self->{PERM_RWX};
my $path = shift;
return undef
- if $path =~ /(~|\.bak|_bak)$/ ||
+ if $path =~ /^(?:RCS|CVS|SCCS|\.svn|_darcs)$/ ||
+ $path =~ /(~|\.bak|_bak)$/ ||
$path =~ /\..*\.sw(o|p)$/ ||
$path =~ /\B\.svn\b/;
$self->opt_M_with('Pod::Perldoc::ToPod'); # the always-there fallthru
$self->opt_o_with('text');
+ $self->opt_o_with('man')
+ if $ENV{TERM} && $ENV{TERM} !~ /dumb|emacs|none|unknown/i;
return;
}
#
# See RT #77465
#
- #push @switches, 'utf8' => 1;
+ # Then again, do *not* comment it out on OpenBSD:
+ # mandoc handles UTF-8 input just fine.
+ push @switches, 'utf8' => 1;
$self->debug( "Pod::Man switches are [@switches]\n" );
$version ge $minimum_groff_version;
}
-sub _have_mandoc_with_utf8 {
- my( $self ) = @_;
-
- $self->_is_mandoc and not system 'mandoc -Tlocale -V > /dev/null 2>&1';
- }
-
sub _collect_nroff_switches {
my( $self ) = shift;
push @render_switches, '-rLL=' . (int $c) . 'n' if $cols > 80;
}
+ if( $self->_is_mandoc ) {
+ push @render_switches, '-Owidth=' . $self->_get_columns;
+ }
+
# I hear persistent reports that adding a -c switch to $render
# solves many people's problems. But I also hear that some mans
# don't have a -c switch, so that unconditionally adding it here
if( $self->_is_nroff ) { qw() }
elsif( $self->_have_groff_with_utf8 ) { qw(-Kutf8 -Tutf8) }
elsif( $self->_is_ebcdic ) { qw(-Tcp1047) }
- elsif( $self->_have_mandoc_with_utf8 ) { qw(-Tlocale) }
elsif( $self->_is_mandoc ) { qw() }
else { qw(-Tlatin1) }
}
length $done
);
+ # wait for it to exit
+ waitpid( $pid, 0 );
+
if( $? ) {
$self->warn( "Error from pipe to $render!\n" );
$self->debug( 'Error: ' . do { local $/; <$err> } );
}
# create a lib/ dir in order to avoid warnings in Test::Distribution
-mkdir "lib", 0755;
+mkdir "lib", $ENV{PERL_CORE} ? 0770 : 0755;
# virtual paths given to EU::MM
my %virtual_path = ( 'Syslog.pm' => '$(INST_LIBDIR)/Syslog.pm' );
If the string is "PARA", C<extract_tagged> returns only the first paragraph
after the tag (up to the first line that is either empty or contains
only whitespace characters).
-If the string is "", the the default behaviour (i.e. failure) is reinstated.
+If the string is "", the default behaviour (i.e. failure) is reinstated.
For example, suppose the start tag "/para" introduces a paragraph, which then
continues until the next "/endpara" tag or until another "/para" tag is
$cut = $i + 1;
$cut++ if ($dirs[$i + 1] && $dirs[$i + 1] eq 'lib');
last;
+ } elsif ($dirs[$i] eq 'lib' && $dirs[$i + 1] && $dirs[0] eq 'ext') {
+ $cut = $i + 1;
}
}
if ($cut > 0) {
# Parse our options, trying to retain backward compatibility with pod2man but
# allowing short forms as well. --lax is currently ignored.
my %options;
+$options{utf8} = 1;
Getopt::Long::config ('bundling_override');
GetOptions (\%options, 'center|c=s', 'date|d=s', 'errors=s', 'fixed=s',
'fixedbold=s', 'fixeditalic=s', 'fixedbolditalic=s', 'help|h',
'lax|l', 'lquote=s', 'name|n=s', 'nourls', 'official|o',
'quotes|q=s', 'release|r=s', 'rquote=s', 'section|s=s', 'stderr',
- 'verbose|v', 'utf8|u')
+ 'verbose|v', 'utf8|u!')
or exit 1;
pod2usage (0) if $options{help};
__END__
=for stopwords
-en em --stderr stderr --utf8 UTF-8 overdo markup MT-LEVEL Allbery Solaris URL
+en em --stderr stderr --no-utf8 UTF-8 overdo markup MT-LEVEL Allbery Solaris URL
troff troff-specific formatters uppercased Christiansen --nourls UTC prepend
lquote rquote
[B<--fixedbolditalic>=I<font>] [B<--name>=I<name>] [B<--nourls>]
[B<--official>] [B<--release>=I<version>] [B<--section>=I<manext>]
[B<--quotes>=I<quotes>] [B<--lquote>=I<quote>] [B<--rquote>=I<quote>]
- [B<--stderr>] [B<--utf8>] [B<--verbose>] [I<input> [I<output>] ...]
+ [B<--stderr>] [B<--no-utf8>] [B<--verbose>] [I<input> [I<output>] ...]
pod2man B<--help>
=item B<-u>, B<--utf8>
-By default, B<pod2man> produces the most conservative possible *roff
-output to try to ensure that it will work with as many different *roff
-implementations as possible. Many *roff implementations cannot handle
-non-ASCII characters, so this means all non-ASCII characters are converted
-either to a *roff escape sequence that tries to create a properly accented
-character (at least for troff output) or to C<X>.
-
-This option says to instead output literal UTF-8 characters. If your
-*roff implementation can handle it, this is the best output format to use
-and avoids corruption of documents containing non-ASCII characters.
-However, be warned that *roff source with literal UTF-8 characters is not
-supported by many implementations and may even result in segfaults and
-other bad behavior.
+This option allows B<pod2man> to output literal UTF-8 characters.
+On OpenBSD, it is enabled by default and can be disabled with
+B<--no-utf8>, in which case non-ASCII characters are converted
+either to *roff escape sequences or to C<X>.
Be aware that, when using this option, the input encoding of your POD
source should be properly declared unless it's US-ASCII. Pod::Simple will
skip "no Socket::SO_PROTOCOL", 1 if !defined(eval { Socket::SO_PROTOCOL });
skip "SO_PROTOCOL defined but not implemented", 1
if !defined $new->sockopt(Socket::SO_PROTOCOL);
+ skip "SO_PROTOCOL returns chosen protocol on OpenBSD", 1
+ if $^O eq 'openbsd';
is($new->protocol(), $p, 'protocol match');
}
SKIP: {
print "# Looping for $busycount iterations should take about 0.025s\n";
}
- my $TIMEOUT = 60;
+ my $TIMEOUT = 600;
my $mutex = 1;
share($mutex);
#define PL_Gfold_locale (my_vars->Gfold_locale)
#define PL_hash_chars (my_vars->Ghash_chars)
#define PL_Ghash_chars (my_vars->Ghash_chars)
-#define PL_hash_seed (my_vars->Ghash_seed)
-#define PL_Ghash_seed (my_vars->Ghash_seed)
#define PL_hash_seed_set (my_vars->Ghash_seed_set)
#define PL_Ghash_seed_set (my_vars->Ghash_seed_set)
-#define PL_hash_state (my_vars->Ghash_state)
-#define PL_Ghash_state (my_vars->Ghash_state)
+#define PL_hash_seed_w (my_vars->Ghash_seed_w)
+#define PL_Ghash_seed_w (my_vars->Ghash_seed_w)
+#define PL_hash_state_w (my_vars->Ghash_state_w)
+#define PL_Ghash_state_w (my_vars->Ghash_state_w)
#define PL_hints_mutex (my_vars->Ghints_mutex)
#define PL_Ghints_mutex (my_vars->Ghints_mutex)
#define PL_keyword_plugin (my_vars->Gkeyword_plugin)
use ExtUtils::MakeMaker;
WriteMakefile(
NAME => 'NDBM_File',
- LIBS => ["-L/usr/local/lib -lndbm", "-ldbm -lucb"],
+ #LIBS => ["-L/usr/local/lib -lndbm", "-ldbm -lucb"],
XSPROTOARG => '-noprototypes', # XXX remove later?
VERSION_FROM => 'NDBM_File.pm',
);
d_setruid=$undef
esac
+# OpenBSD 5.5 on has 64 bit time_t
+case "$osvers" in
+[0-4].*|5.[0-4]) ;;
+*)
+ cppflags="$cppflags -DBIG_TIME"
+ ;;
+esac
+
#
# Not all platforms support dynamic loading...
# For the case of "$openbsd_distribution", the hints file
test -z "$usedl" && usedl=$define
# We use -fPIC here because -fpic is *NOT* enough for some of the
# extensions like Tk on some OpenBSD platforms (ie: sparc)
- cccdlflags="-DPIC -fPIC $cccdlflags"
+ PICFLAG=-fPIC
+ if [ -e /usr/share/mk/bsd.own.mk ]; then
+ PICFLAG=`make -f /usr/share/mk/bsd.own.mk -V PICFLAG`
+ fi
+ cccdlflags="-DPIC ${PICFLAG} $cccdlflags"
case "$osvers" in
[01].*|2.[0-7]|2.[0-7].*)
lddlflags="-Bshareable $lddlflags"
;;
*) # from 3.1 onwards
ld=${cc:-cc}
- lddlflags="-shared -fPIC $lddlflags"
+ lddlflags="-shared ${PICFLAG} $lddlflags"
libswanted=`echo $libswanted | sed 's/ dl / /'`
;;
esac
# around for old NetBSD binaries.
libswanted=`echo $libswanted | sed 's/ crypt / /'`
+# OpenBSD hasn't ever needed linking to libutil
+libswanted=`echo $libswanted | sed 's/ util / /'`
+
# Configure can't figure this out non-interactively
d_suidsafe=$define
;;
esac
+#
+# Unaligned access on alpha with -ftree-ter
+# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59679
+# More details
+# https://rt.perl.org/Public/Bug/Display.html?id=120888
+#
+case "${ARCH}-${osvers}" in
+ alpha-*)
+ ccflags="-fno-tree-ter $ccflags"
+ ;;
+esac
+
+# Special per-arch specific ccflags
+case "${ARCH}-${osvers}" in
+ vax-*)
+ ccflags="-DUSE_PERL_ATOF=0 $ccflags"
+ ;;
+esac
+
# This script UU/usethreads.cbu will get 'called-back' by Configure
# after it has prompted the user for whether to use threads.
cat > UU/usethreads.cbu <<'EOCBU'
# Broken up to OpenBSD 3.6, fixed in OpenBSD 3.7
d_getservbyname_r=$undef ;;
esac
+ ;;
+*)
+ libswanted=`echo $libswanted | sed 's/ pthread / /'`
esac
EOCBU
siteprefix='/usr/local'
siteprefixexp='/usr/local'
# Ports installs non-std libs in /usr/local/lib so look there too
- locincpth='/usr/local/include'
- loclibpth='/usr/local/lib'
+ locincpth=''
+ loclibpth=''
# Link perl with shared libperl
- if [ "$usedl" = "$define" -a -r shlib_version ]; then
+ if [ "$usedl" = "$define" -a -r $src/shlib_version ]; then
useshrplib=true
- libperl=`. ./shlib_version; echo libperl.so.${major}.${minor}`
+ libperl=`. $src/shlib_version; echo libperl.so.${major}.${minor}`
fi
;;
esac
# which is being fixed. In the meantime, forbid POSIX 2008 locales
d_newlocale="$undef"
+# OpenBSD's locale support is not that complete yet
+ccflags="-DNO_LOCALE_NUMERIC -DNO_LOCALE_COLLATE $ccflags"
+
# end
#if defined(PERL_HASH_FUNC_SIPHASH)
# define __PERL_HASH_FUNC "SIPHASH_2_4"
-# define __PERL_HASH_SEED_BYTES 16
-# define __PERL_HASH_STATE_BYTES 32
+# define __PERL_HASH_WORD_TYPE U64
+# define __PERL_HASH_WORD_SIZE sizeof(__PERL_HASH_WORD_TYPE)
+# define __PERL_HASH_SEED_BYTES (__PERL_HASH_WORD_SIZE * 2)
+# define __PERL_HASH_STATE_BYTES (__PERL_HASH_WORD_SIZE * 4)
# define __PERL_HASH_SEED_STATE(seed,state) S_perl_siphash_seed_state(seed,state)
# define __PERL_HASH_WITH_STATE(state,str,len) S_perl_hash_siphash_2_4_with_state((state),(U8*)(str),(len))
#elif defined(PERL_HASH_FUNC_SIPHASH13)
# define __PERL_HASH_FUNC "SIPHASH_1_3"
-# define __PERL_HASH_SEED_BYTES 16
-# define __PERL_HASH_STATE_BYTES 32
+# define __PERL_HASH_WORD_TYPE U64
+# define __PERL_HASH_WORD_SIZE sizeof(__PERL_HASH_WORD_TYPE)
+# define __PERL_HASH_SEED_BYTES (__PERL_HASH_WORD_SIZE * 2)
+# define __PERL_HASH_STATE_BYTES (__PERL_HASH_WORD_SIZE * 4)
# define __PERL_HASH_SEED_STATE(seed,state) S_perl_siphash_seed_state(seed,state)
# define __PERL_HASH_WITH_STATE(state,str,len) S_perl_hash_siphash_1_3_with_state((state),(U8*)(str),(len))
#elif defined(PERL_HASH_FUNC_STADTX)
# define __PERL_HASH_FUNC "STADTX"
-# define __PERL_HASH_SEED_BYTES 16
-# define __PERL_HASH_STATE_BYTES 32
+# define __PERL_HASH_WORD_TYPE U64
+# define __PERL_HASH_WORD_SIZE sizeof(__PERL_HASH_WORD_TYPE)
+# define __PERL_HASH_SEED_BYTES (__PERL_HASH_WORD_SIZE * 2)
+# define __PERL_HASH_STATE_BYTES (__PERL_HASH_WORD_SIZE * 4)
# define __PERL_HASH_SEED_STATE(seed,state) stadtx_seed_state(seed,state)
# define __PERL_HASH_WITH_STATE(state,str,len) (U32)stadtx_hash_with_state((state),(U8*)(str),(len))
# include "stadtx_hash.h"
#elif defined(PERL_HASH_FUNC_ZAPHOD32)
# define __PERL_HASH_FUNC "ZAPHOD32"
-# define __PERL_HASH_SEED_BYTES 12
-# define __PERL_HASH_STATE_BYTES 12
+# define __PERL_HASH_WORD_TYPE U32
+# define __PERL_HASH_WORD_SIZE sizeof(__PERL_HASH_WORD_TYPE)
+# define __PERL_HASH_SEED_BYTES (__PERL_HASH_WORD_SIZE * 3)
+# define __PERL_HASH_STATE_BYTES (__PERL_HASH_WORD_SIZE * 3)
# define __PERL_HASH_SEED_STATE(seed,state) zaphod32_seed_state(seed,state)
# define __PERL_HASH_WITH_STATE(state,str,len) (U32)zaphod32_hash_with_state((state),(U8*)(str),(len))
# include "zaphod32_hash.h"
#endif
+#define __PERL_HASH_SEED_roundup(x, y) ( ( ( (x) + ( (y) - 1 ) ) / (y) ) * (y) )
+#define _PERL_HASH_SEED_roundup(x) __PERL_HASH_SEED_roundup(x,__PERL_HASH_WORD_SIZE)
+
+#define PL_hash_seed ((U8 *)PL_hash_seed_w)
+#define PL_hash_state ((U8 *)PL_hash_state_w)
+
#if PERL_HASH_USE_SBOX32_ALSO != 1
# define _PERL_HASH_FUNC __PERL_HASH_FUNC
# define _PERL_HASH_SEED_BYTES __PERL_HASH_SEED_BYTES
#else
#define _PERL_HASH_FUNC "SBOX32_WITH_" __PERL_HASH_FUNC
-
-#define _PERL_HASH_SEED_BYTES ( __PERL_HASH_SEED_BYTES + (int)( 3 * sizeof(U32) ) )
+/* note the 3 in the below code comes from the fact the seed to initialize the SBOX is 96 bits */
+#define _PERL_HASH_SEED_BYTES ( __PERL_HASH_SEED_BYTES + (int)( 3 * sizeof(U32)) )
#define _PERL_HASH_STATE_BYTES \
( __PERL_HASH_STATE_BYTES + ( ( 1 + ( 256 * SBOX32_MAX_LEN ) ) * sizeof(U32) ) )
#endif
-PERL_STATIC_INLINE
-U32 S_perl_hash_with_seed(const U8 * const seed, const U8 * const str, const STRLEN len)
-{
- U8 state[_PERL_HASH_STATE_BYTES];
- _PERL_HASH_SEED_STATE(seed,state);
- return _PERL_HASH_WITH_STATE(state,str,len);
-}
-
#define PERL_HASH_WITH_SEED(seed,hash,str,len) \
(hash) = S_perl_hash_with_seed((const U8 *) seed, (const U8 *) str,len)
#define PERL_HASH_WITH_STATE(state,hash,str,len) \
(hash) = _PERL_HASH_WITH_STATE((state),(U8*)(str),(len))
+
#define PERL_HASH_SEED_STATE(seed,state) _PERL_HASH_SEED_STATE(seed,state)
-#define PERL_HASH_SEED_BYTES _PERL_HASH_SEED_BYTES
-#define PERL_HASH_STATE_BYTES _PERL_HASH_STATE_BYTES
+#define PERL_HASH_SEED_BYTES _PERL_HASH_SEED_roundup(_PERL_HASH_SEED_BYTES)
+#define PERL_HASH_STATE_BYTES _PERL_HASH_SEED_roundup(_PERL_HASH_STATE_BYTES)
#define PERL_HASH_FUNC _PERL_HASH_FUNC
+#define PERL_HASH_SEED_WORDS (PERL_HASH_SEED_BYTES/__PERL_HASH_WORD_SIZE)
+#define PERL_HASH_STATE_WORDS (PERL_HASH_STATE_BYTES/__PERL_HASH_WORD_SIZE)
+
#ifdef PERL_USE_SINGLE_CHAR_HASH_CACHE
#define PERL_HASH(state,str,len) \
(hash) = ((len) < 2 ? ( (len) == 0 ? PL_hash_chars[256] : PL_hash_chars[(U8)(str)[0]] ) \
#endif /* defined(CAN64BITHASH) */
+PERL_STATIC_INLINE U32
+S_perl_hash_with_seed(const U8 * seed, const U8 *str, STRLEN len) {
+ __PERL_HASH_WORD_TYPE state[PERL_HASH_STATE_WORDS];
+ _PERL_HASH_SEED_STATE(seed,(U8*)state);
+ return _PERL_HASH_WITH_STATE((U8*)state,str,len);
+}
+
#endif /*compile once*/
/*
use strict;
use vars qw($Is_VMS $Is_W32 $Is_OS2 $Is_Cygwin $Is_Darwin $Is_NetWare $Is_AmigaOS
%opts $packlist);
-use subs qw(unlink link chmod);
+use subs qw(unlink link chmod chown);
require File::Path;
require File::Copy;
unless -f $to and (chmod(0666, $to), unlink $to)
and File::Copy::copy($from, $to) and ++$success;
}
+ if (defined($opts{uid}) || defined($opts{gid})) {
+ chown($opts{uid}, $opts{gid}, $to) if $success;
+ }
$packlist->{$xto} = { type => 'file' };
}
$success;
unless $opts{notify};
}
+sub chown {
+ my($uid,$gid,$name) = @_;
+
+ return if ($^O eq 'dos');
+ printf " chown %s:%s %s\n", $uid, $gid, $name if $opts{verbose};
+ CORE::chown($uid,$gid,$name)
+ || warn sprintf("Couldn't chown %s:%s %s: $!\n", $uid, $gid, $name)
+ unless $opts{notify};
+}
+
sub samepath {
my($p1, $p2) = @_;
}
sub mkpath {
- File::Path::mkpath(shift , $opts{verbose}, 0777) unless $opts{notify};
+ File::Path::make_path(shift, {owner=>$opts{uid}, group=>$opts{gid},
+ mode=>0777, verbose=>$opts{verbose}}) unless $opts{notify};
}
sub unixtoamiga
my $usage = 0;
if (!GetOptions(\%opts, 'notify|n', 'strip|s', 'silent|S',
'skip-otherperls|o', 'force|f', 'verbose|V', 'archname|A',
- 'netware', 'nopods|p', 'destdir:s', 'help|h|?',
- 'versiononly|v' => \$versiononly, '<>' => sub {
+ 'netware', 'nopods|p', 'destdir:s', 'help|h|?', 'user|u:s',
+ 'group|g:s', 'versiononly|v' => \$versiononly, '<>' => sub {
if ($_[0] eq '+v') {
$versiononly = 0;
} else {
-A Also install perl with the architecture's name in the perl binary's
name.
-p Don't install the pod files. [This will break use diagnostics;]
+ -g group install files with the specified group
+ -u user install files with the specified user
-netware Install correctly on a Netware server.
-destdir Prefix installation directories by this string.
-h Display this help message.
exit $usage;
}
}
+$opts{'uid'} = getpwnam($opts{'user'}) if exists($opts{'user'});
+$opts{'gid'} = getgrnam($opts{'group'}) if exists($opts{'group'});
$versiononly = 1 if $Config{versiononly} && !defined $versiononly;
my (@scripts, @tolink);
}
# Exclude nonxs extensions that are not architecture dependent
-my @nonxs = grep(!/^Errno$/, split(' ', $Config{'nonxs_ext'}));
+my @nonxs = grep(!/^(Errno|IO\/Compress)$/, split(' ', $Config{'nonxs_ext'}));
my @ext_dirs = qw(cpan dist ext);
foreach my $ext_dir (@ext_dirs) {
my $installarchlib = "$opts{destdir}$Config{installarchlib}";
my $installsitelib = "$opts{destdir}$Config{installsitelib}";
my $installsitearch = "$opts{destdir}$Config{installsitearch}";
-my $installman1dir = "$opts{destdir}$Config{installman1dir}";
+my $installman1dir = "none";
my $man1ext = $Config{man1ext};
my $libperl = $Config{libperl};
# Shared library and dynamic loading suffixes.
$installbin || die "No installbin directory in config.sh\n";
-d $installbin || mkpath($installbin);
-d $installbin || $opts{notify} || die "$installbin is not a directory\n";
--w $installbin || $opts{notify} || die "$installbin is not writable by you\n"
- unless $installbin =~ m#^/afs/# || $opts{notify};
if (!$Is_NetWare) {
if (!$Is_VMS) {
}
}
--f 't/rantests' || $Is_W32
- || warn "WARNING: You've never run 'make test' or",
- " some tests failed! (Installing anyway.)\n";
+#-f 't/rantests' || $Is_W32
+# || warn "WARNING: You've never run 'make test' or",
+# " some tests failed! (Installing anyway.)\n";
} #if (!$Is_NetWare)
# This will be used to store the packlist
$packlist->{"$Config{installbin}/$perldll"} = { type => 'file' };
} # if (($Is_W32 and ! $Is_NetWare) or $Is_Cygwin)
+# Get the install command and flags from the environment
+my @installcmd = $ENV{"INSTALL"} || "install";
+push(@installcmd, $ENV{"INSTALL_COPY"} || "-c");
+
# First we install the version-numbered executables.
if ($Is_VMS) {
}
elsif ($^O ne 'dos') {
if (!$Is_NetWare) {
- safe_unlink("$installbin/$perl_verbase$ver$exe_ext");
- copy("perl$exe_ext", "$installbin/$perl_verbase$ver$exe_ext");
- strip("$installbin/$perl_verbase$ver$exe_ext");
- fix_dep_names("$installbin/$perl_verbase$ver$exe_ext");
- chmod(0755, "$installbin/$perl_verbase$ver$exe_ext");
+ my $ver = ''; # don't install a versioned perl binary
+ install("perl$exe_ext", "$installbin/$perl_verbase$ver$exe_ext", "0755");
}
else {
# If installing onto a NetWare server
@corefiles = <*.h>;
} else {
# [als] hard-coded 'libperl' name... not good!
- @corefiles = <*.h libperl*.* perl*$Config{lib_ext}>;
+ #@corefiles = <*.h libperl*.* perl*$Config{lib_ext}>;
+ @corefiles = <*.h *.inc perl*$Config{lib_ext}>;
+ install($libperl, "$opts{destdir}$Config{glibpth}/$libperl", "0444");
# AIX needs perl.exp installed as well.
push(@corefiles,'perl.exp') if $^O eq 'aix';
# Install main perl executables
# Make links to ordinary names if installbin directory isn't current directory.
-if (! $versiononly && ! samepath($installbin, '.') && ($^O ne 'dos') && ! $Is_VMS && ! $Is_NetWare) {
+if (0) { # don't install a versioned perl binary
+#if (! $versiononly && ! samepath($installbin, '.') && ($^O ne 'dos') && ! $Is_VMS && ! $Is_NetWare) {
safe_unlink("$installbin/$perl$exe_ext", "$installbin/suid$perl$exe_ext");
if ($^O eq 'vos') {
# VOS doesn't support hard links, so use a symlink.
$packlist->write() unless $opts{notify};
+if (defined($opts{uid}) || defined($opts{gid})) {
+ chown($opts{uid}, $opts{gid}, $packlist->packlist_file());
+}
print " Installation complete\n" if $opts{verbose};
exit 0;
sub copy {
my($from,$to) = @_;
+ my($success) = 0;
my $xto = $to;
$xto =~ s/^\Q$opts{destdir}\E//;
unless $opts{silent};
print " creating new version of $xto\n"
if $Is_VMS and -e $to and !$opts{silent};
- unless ($opts{notify} or File::Copy::copy($from, $to)) {
+ unless ($opts{notify} or File::Copy::copy($from, $to) and ++$success) {
# Might have been that F::C::c can't overwrite the target
warn "Couldn't copy $from to $to: $!\n"
unless -f $to and (chmod(0666, $to), unlink $to)
- and File::Copy::copy($from, $to);
+ and File::Copy::copy($from, $to) and ++$success;
}
+ if (defined($opts{uid}) || defined($opts{gid})) {
+ chown($opts{uid}, $opts{gid}, $to) if $success;
+ }
+ $packlist->{$xto} = { type => 'file' };
+}
+
+sub install {
+ my($from,$to,$mode) = @_;
+
+ my $xto = $to;
+ my $cmd = join(' ', @installcmd);
+ $cmd .= " -m $mode" if $mode;
+ $cmd .= " -s" if $opts{strip};
+ $cmd .= " -o $opts{uid}" if defined($opts{uid});
+ $cmd .= " -g $opts{gid}" if defined($opts{gid});
+ $cmd .= " $from $to";
+ $xto =~ s/^\Q$opts{destdir}\E// if $opts{destdir};
+ print $opts{verbose} ? " install $from $xto\n" : " $xto\n" unless $opts{silent};
+ system($cmd);
+ warn "Couldn't $cmd\n" if $?;
$packlist->{$xto} = { type => 'file' };
}
return;
}
+ # If we have different install version, install that instead
+ return if -e "$_.install";
+ $name =~ s/\.install$//;
+
# ignore patch backups, RCS files, emacs backup & temp files and the
# .exists files, .PL files, and test files.
return if $name =~ m{\.orig$|\.rej$|~$|^#.+#$|,v$|^\.exists|\.PL$|\.plc$|\.t$|^test\.pl$|^dbm_filter_util\.pl$|^filter-util\.pl$|^uupacktool\.pl$|^\.gitignore$} ||
AnyDBM_File - provide framework for multiple DBMs
-NDBM_File, DB_File, GDBM_File, SDBM_File, ODBM_File - various DBM implementations
-
=head1 SYNOPSIS
use AnyDBM_File;
PERL_STATIC_INLINE NV
S_strtod(pTHX_ const char * const s, char ** e)
{
- DECLARATION_FOR_LC_NUMERIC_MANIPULATION;
NV result;
+ DECLARATION_FOR_LC_NUMERIC_MANIPULATION;
STORE_LC_NUMERIC_SET_TO_NEEDED();
# endif
#endif
+#undef PERL_BUILD_DATE
+
#ifdef PERL_BUILD_DATE
PUSHs(Perl_newSVpvn_flags(aTHX_
STR_WITH_LEN("Compiled at " PERL_BUILD_DATE),
#define PL_fold_locale (*Perl_Gfold_locale_ptr(NULL))
#undef PL_hash_chars
#define PL_hash_chars (*Perl_Ghash_chars_ptr(NULL))
-#undef PL_hash_seed
-#define PL_hash_seed (*Perl_Ghash_seed_ptr(NULL))
#undef PL_hash_seed_set
#define PL_hash_seed_set (*Perl_Ghash_seed_set_ptr(NULL))
-#undef PL_hash_state
-#define PL_hash_state (*Perl_Ghash_state_ptr(NULL))
+#undef PL_hash_seed_w
+#define PL_hash_seed_w (*Perl_Ghash_seed_w_ptr(NULL))
+#undef PL_hash_state_w
+#define PL_hash_state_w (*Perl_Ghash_state_w_ptr(NULL))
#undef PL_hints_mutex
#define PL_hints_mutex (*Perl_Ghints_mutex_ptr(NULL))
#undef PL_keyword_plugin
#endif
PERLVARI(G, hash_seed_set, bool, FALSE) /* perl.c */
-PERLVARA(G, hash_seed, PERL_HASH_SEED_BYTES, unsigned char) /* perl.c and hv.h */
+PERLVARA(G, hash_seed_w, PERL_HASH_SEED_WORDS, __PERL_HASH_WORD_TYPE) /* perl.c and hv.h */
#if defined(PERL_HASH_STATE_BYTES)
-PERLVARA(G, hash_state, PERL_HASH_STATE_BYTES, unsigned char) /* perl.c and hv.h */
+PERLVARA(G, hash_state_w, PERL_HASH_STATE_WORDS, __PERL_HASH_WORD_TYPE) /* perl.c and hv.h */
#endif
#if defined(PERL_USE_SINGLE_CHAR_HASH_CACHE)
PERLVARA(G, hash_chars, (1+256) * sizeof(U32), unsigned char) /* perl.c and hv.h */
Or, you can combine this step with the next to save disk space:
- gzip -dc yourmodule.tar.gz | tar -xof -
+ gzip -dc yourmodule.tar.gz | tar -xf -
B. UNPACK
-Unpack the result with C<tar -xof yourmodule.tar>
+Unpack the result with C<tar -xf yourmodule.tar>
C. BUILD
die "p5p-controlled module $filename missing =head1 NAME\n"
if $filename !~ m{^(dist/|cpan/)}n # under our direct control
&& $filename !~ m{/_[^/]+\z} # not private
+ && $filename !~ m{/unicore/} # not unicore
&& $filename ne 'lib/meta_notation.pm' # no pod
&& $filename ne 'lib/overload/numbers.pm'; # no pod
warn "$filename missing =head1 NAME\n" unless $Quiet;
C<"\015">. If you get in the habit of using C<"\n"> for networking,
you may be burned some day.
X<newline> X<line terminator> X<eol> X<end of line>
-X<\n> X<\r> X<\r\n>
+X<\r>
For constructs that do interpolate, variables beginning with "C<$>"
or "C<@>" are interpolated. Subscripted variables such as C<$a[3]> or
"Integer overflow in srand");
anum = UV_MAX;
}
+ (void)srand48_deterministic((Rand_seed_t)anum);
}
else {
anum = seed();
+ (void)seedDrand01((Rand_seed_t)anum);
}
- (void)seedDrand01((Rand_seed_t)anum);
PL_srand_called = TRUE;
if (anum)
XPUSHu(anum);
$package = $1;
last;
}
+ elsif (/^\s*package\s*$/) {
+ # If they're hiding their package name, we ignore them
+ ++$ignore{"/$path"};
+ $package='';
+ last;
+ }
}
close $fh
or die "Can't close $file: $!";
-major=21
+major=22
minor=0
}
eval("sub flim () { 0; }") unless defined(&flim);
eval("sub flam () { 1; }") unless defined(&flam);
- eval 'sub blli_in_use {
- my($blli) = @_;
- eval q({ ($blli->{l2_proto}) || ($blli->{l3_proto}); });
- }' unless defined(&blli_in_use);
eval 'sub multiline () {"multilinestring";}' unless defined(&multiline);
}
1;
}
} else {
# Fudge it by waiting a bit more:
- sleep 2;
+ sleep 3;
}
my $ppid2 = getppid();
print $w "$how,$ppid1,$ppid2\n";
Digest cpan/Digest/Digest.pm 43f7f544cb11842b2f55c73e28930da50774e081
Digest::MD5 cpan/Digest-MD5/Makefile.PL 3bf781444ee671da63f1c6360e0a31f11d9ba520
Digest::MD5 cpan/Digest-MD5/MD5.pm df5f0663f0f755be7eda6e3d2f008f2629246b19
-Digest::MD5 cpan/Digest-MD5/MD5.xs 249bed648232192ce018f7f894ad127c3a639831
-Digest::MD5 cpan/Digest-MD5/t/files.t e987329d2411ff60ad9a2bdf93fdf5f6943467e8
+Digest::MD5 cpan/Digest-MD5/MD5.xs 434fa3e21878f736edbc95a71b66704ba26b944b
+Digest::MD5 cpan/Digest-MD5/t/files.t 6f74e20fe4d958fc0e0f2e5b70c9c02d33b54a51
Filter::Util::Call pod/perlfilter.pod e9833bf4ebc51087dfee5c553e0f8a5eef67212d
Locale::Maketext::Simple cpan/Locale-Maketext-Simple/lib/Locale/Maketext/Simple.pm 57ed38905791a17c150210cd6f42ead22a7707b6
Math::Complex cpan/Math-Complex/lib/Math/Complex.pm 198ea6c6c584f5ea79a0fd7e9d411d0878f3b2af
Pod::Checker cpan/Pod-Checker/t/pod/selfcheck.t 8ce3cfd38e4b9bcf5bc7fe7f2a14195e49aed7d8
Pod::Checker cpan/Pod-Checker/t/pod/testcmp.pl a0cd5c8eca775c7753f4464eee96fa916e3d8a16
Pod::Checker cpan/Pod-Checker/t/pod/testpchk.pl b2072c7f4379fd050e15424175d7cac5facf5b3b
-Pod::Perldoc cpan/Pod-Perldoc/lib/Pod/Perldoc.pm 582be34c077c9ff44d99914724a0cc2140bcd48c
+Pod::Perldoc cpan/Pod-Perldoc/lib/Pod/Perldoc.pm d97aa26b722e6e3120b19ee0d7cf9af04dfdfb7f
Pod::Usage cpan/Pod-Usage/t/pod/testp2pt.pl d43ea8391bd95aefdb710ab2947771155a88d424
Win32API::File cpan/Win32API-File/File.pm 8fd212857f821cb26648878b96e57f13bf21b99e
Win32API::File cpan/Win32API-File/File.xs beb870fed4490d2faa547b4a8576b8d64d1d27c5
experimental cpan/experimental/t/basic.t cb9da8dd05b854375809872a05dd32637508d5da
version cpan/version/lib/version.pm 7ef9219d1d5f1d71f08a79f3b0577df138b21b12
-version vutil.c 601cc57bbc0070ae33eab7fd2d667f20efbe15f8
+version vutil.c bc2101e9d378cddaa41c02b3a95bbb148c172f55
# Exceptions that are found in dual-life bin dirs but aren't
# installed by default; some occur only during testing:
my $not_installed = qr{^(?:
+ \.\./cpan/Archive-Tar/bin/ptar.*
+ |
+ \.\./cpan/JSON-PP/bin/json_pp
+ |
+ \.\./cpan/IO-Compress/bin/zipdetails
+ |
\.\./cpan/Encode/bin/u(?:cm(?:2table|lint|sort)|nidump)
|
\.\./cpan/Module-(?:Metadata|Build)
$symbols{data}{common} = $symbols{data}{bss};
}
- ok($symbols{data}{common}{PL_hash_seed}{'globals.o'}, "has PL_hash_seed");
+ ok($symbols{data}{common}{PL_hash_seed_w}{'globals.o'}, "has PL_hash_seed_w");
ok($symbols{data}{data}{PL_ppaddr}{'globals.o'}, "has PL_ppaddr");
# None of the GLOBAL_STRUCT* business here.
watchdog(($ENV{PERL_TEST_TIME_OUT_FACTOR} || 1)
* (($::running_as_thread && $::running_as_thread)
- ? 150 : 225));
+ ? 150 : 540));
{
# [perl #120446]
U32
Perl_seed(pTHX)
{
+#if defined(__OpenBSD__)
+ return arc4random();
+#else
/*
* This is really just a quick hack which grabs various garbage
* values. It really should be a real hash algorithm which
u += SEED_C5 * (U32)PTR2UV(&when);
#endif
return u;
+#endif
}
void
utils/h2ph
utils/h2xs
utils/instmodsh
-utils/json_pp
utils/libnetcfg
-utils/perlbug # link = utils/perlthanks
+utils/perlbug
utils/perldoc
utils/perlivp
utils/piconv
utils/pl2pm
utils/pod2html
utils/prove
-utils/ptar
-utils/ptardiff
-utils/ptargrep
-utils/shasum
utils/splain
utils/streamzip
utils/xsubpp
-utils/zipdetails
# Files to be built with variable substitution after miniperl is
# available. Dependencies handled manually below (for now).
-pl = corelist.PL cpan.PL h2ph.PL h2xs.PL instmodsh.PL json_pp.PL perlbug.PL perldoc.PL perlivp.PL pl2pm.PL prove.PL ptar.PL ptardiff.PL ptargrep.PL shasum.PL splain.PL libnetcfg.PL piconv.PL enc2xs.PL encguess.PL xsubpp.PL pod2html.PL zipdetails.PL streamzip.PL
-plextract = corelist cpan h2ph h2xs instmodsh json_pp perlbug perldoc perlivp pl2pm prove ptar ptardiff ptargrep shasum splain libnetcfg piconv enc2xs encguess xsubpp pod2html zipdetails streamzip
-plextractexe = ./corelist ./cpan ./h2ph ./h2xs ./json_pp ./instmodsh ./perlbug ./perldoc ./perlivp ./pl2pm ./prove ./ptar ./ptardiff ./ptargrep ./shasum ./splain ./libnetcfg ./piconv ./enc2xs ./encguess ./xsubpp ./pod2html ./zipdetails ./streamzip
+pl = corelist.PL cpan.PL h2ph.PL h2xs.PL instmodsh.PL perlbug.PL perldoc.PL perlivp.PL pl2pm.PL prove.PL splain.PL libnetcfg.PL piconv.PL enc2xs.PL encguess.PL xsubpp.PL pod2html.PL zipdetails.PL streamzip.PL
+plextract = corelist cpan h2ph h2xs instmodsh perlbug perldoc perlivp pl2pm prove splain libnetcfg piconv enc2xs encguess xsubpp pod2html zipdetails streamzip
+plextractexe = ./corelist ./cpan ./h2ph ./h2xs ./instmodsh ./perlbug ./perldoc ./perlivp ./pl2pm ./prove ./splain ./libnetcfg ./piconv ./enc2xs ./encguess xsubpp.PL ./pod2html ./zipdetails ./streamzip
all: $(plextract)
instmodsh: instmodsh.PL ../config.sh
-json_pp: json_pp.PL ../config.sh
-
perlbug: perlbug.PL ../config.sh ../patchlevel.h
perldoc: perldoc.PL ../config.sh
prove: prove.PL ../config.sh
-ptar: ptar.PL ../config.sh
-
-ptardiff: ptardiff.PL ../config.sh
-
-ptargrep: ptargrep.PL ../config.sh
-
pl2pm: pl2pm.PL ../config.sh
-shasum: shasum.PL ../config.sh
-
splain: splain.PL ../config.sh ../lib/diagnostics.pm
libnetcfg: libnetcfg.PL ../config.sh
xsubpp: xsubpp.PL ../config.sh
-zipdetails: zipdetails.PL ../config.sh
-
streamzip: streamzip.PL ../config.sh
pod2html: pod2html.PL ../config.sh ../ext/Pod-Html/bin/pod2html
$in =~ s/\?\?</{/g; # | ??<| {|
$in =~ s/\?\?>/}/g; # | ??>| }|
}
- if ($in =~ /^\#ifdef __LANGUAGE_PASCAL__/) {
+ if ($in =~ s/^\#ifdef __LANGUAGE_PASCAL__//) {
# Tru64 disassembler.h evilness: mixed C and Pascal.
while (<IN>) {
last if /^\#endif/;
$in = "";
next READ;
}
- if ($in =~ /^extern inline / && # Inlined assembler.
- $^O eq 'linux' && $file =~ m!(?:^|/)asm/[^/]+\.h$!) {
+ # Skip inlined functions in headers
+ if ($in =~ s/^(extern|static) (__inline__|inline) .*[^;]\s*$//) {
while (<IN>) {
last if /^}/;
}
authors and maintainers of perl.
If you wish to generate a bug report, please run it without the -T flag
-(or run the program perlbug rather than perlthanks)
EOF
} else {
paraprint <<"EOF";
This program provides an easy way to generate a bug report for the core
perl distribution (along with tests or patches). To send a thank-you
-note to $thanksaddress instead of a bug report, please run 'perlthanks'.
+note to $thanksaddress instead of a bug report, please use the -T flag.
The GitHub issue tracker at https://github.com/Perl/perl5/issues is the
best place to submit your report so it can be tracked and resolved.
B<perlbug> S<[ B<-v> ]> S<[ B<-r> I<returnaddress> ]>
S<[ B<-ok> | B<-okay> | B<-nok> | B<-nokay> ]>
-B<perlthanks>
-
=head1 DESCRIPTION
=item Can you use C<perlbug> to submit a thank-you note?
-Yes, you can do this by either using the C<-T> option, or by invoking
-the program as C<perlthanks>. Thank-you notes are good. It makes people
+Yes, you can do this by using the C<-T> option.
+Thank-you notes are good. It makes people
smile.
=back
/* may get too much accuracy */
char tbuf[64];
+#ifdef __vax__
+ SV *sv = SvNVX(ver) > 10e37 ? newSV(64) : 0;
+#else
SV *sv = SvNVX(ver) > 10e50 ? newSV(64) : 0;
+#endif
char *buf;
#if PERL_VERSION_GE(5,19,0)
-if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
-if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module
-if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP
+ -if exist $(LIBDIR)\OpenBSD rmdir /s /q $(LIBDIR)\OpenBSD
-if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params
-if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse
-if exist $(LIBDIR)\Perl rmdir /s /q $(LIBDIR)\Perl
-if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
-if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module
-if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP
+ -if exist $(LIBDIR)\OpenBSD rmdir /s /q $(LIBDIR)\OpenBSD
-if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params
-if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse
-if exist $(LIBDIR)\Perl rmdir /s /q $(LIBDIR)\Perl
-if exist $(LIBDIR)\MIME rmdir /s /q $(LIBDIR)\MIME
-if exist $(LIBDIR)\Module rmdir /s /q $(LIBDIR)\Module
-if exist $(LIBDIR)\Net\FTP rmdir /s /q $(LIBDIR)\Net\FTP
+ -if exist $(LIBDIR)\OpenBSD rmdir /s /q $(LIBDIR)\OpenBSD
-if exist $(LIBDIR)\Params rmdir /s /q $(LIBDIR)\Params
-if exist $(LIBDIR)\Parse rmdir /s /q $(LIBDIR)\Parse
-if exist $(LIBDIR)\Perl rmdir /s /q $(LIBDIR)\Perl
projects / openbsd / commitdiff