Fix some program names that were not expanded correctly when ncurses was

updated and were instead replaced by ?. ok millert

diff --git a/lib/libcurses/terminfo.5 b/lib/libcurses/terminfo.5
index f79728b..6343908 100644 (file)
--- a/lib/libcurses/terminfo.5
+++ b/lib/libcurses/terminfo.5
@@ -33,7 +33,7 @@
 .\" authorization.                                                           *
 .\"***************************************************************************
 .\"
-.\" $Id: terminfo.5,v 1.2 2023/10/17 09:52:08 nicm Exp $
+.\" $Id: terminfo.5,v 1.3 2024/08/23 15:10:40 nicm Exp $
 .TH terminfo 5 2023-07-01 "ncurses 6.4" "File formats"
 .ds n 5
 .ds d /usr/share/terminfo
@@ -73,8 +73,8 @@ used by screen-oriented programs such as
 and other curses applications,
 using high-level calls to libraries such as \fBcurses\fP(3).
 It is also used via low-level calls by non-curses applications
-which may be screen-oriented (such as \fB?\fP(1))
-or non-screen (such as \fB?\fP(1)).
+which may be screen-oriented (such as \fBclear\fP(1))
+or non-screen (such as \fBtabs\fP(1)).
 .PP
 .I Terminfo
 describes terminals by giving a set of capabilities which they
@@ -1784,7 +1784,7 @@ T}
 .\" authorization.                                                           *
 .\"***************************************************************************
 .\"
-.\" $Id: terminfo.5,v 1.2 2023/10/17 09:52:08 nicm Exp $
+.\" $Id: terminfo.5,v 1.3 2024/08/23 15:10:40 nicm Exp $
 .ps +1
 .SS User-Defined Capabilities
 .
@@ -3140,7 +3140,7 @@ and
 respectively.
 These strings are output
 by \fIreset\fP option of \fBtput\fP,
-or by the \fB?\fP program
+or by the \fBreset\fP program
 (an alias of \fBtset\fP),
 which is used when the terminal gets into a wedged state.
 Commands are normally placed in
@@ -3157,7 +3157,7 @@ normally be part of
 but it causes an annoying glitch of the screen and is not normally
 needed since the terminal is usually already in 80-column mode.
 .PP
-The \fB?\fP program writes strings including
+The \fBreset\fP program writes strings including
 .BR iprog ,
 etc., in the same order as the
 .I init
@@ -3173,7 +3173,7 @@ If any of
 or
 .B rf
 reset capability strings are missing,
-the \fB?\fP program
+the \fBreset\fP program
 falls back upon the corresponding initialization capability string.
 .PP
 If there are commands to set and clear tab stops, they can be given as
@@ -3189,13 +3189,13 @@ or
 .BR if .
 .PP
 The \fBtput reset\fP command uses the same capability strings
-as the \fB?\fP command,
-although the two programs (\fBtput\fP and \fB?\fP)
+as the \fBreset\fP command,
+although the two programs (\fBtput\fP and \fBreset\fP)
 provide different command-line options.
 .PP
 In practice, these terminfo capabilities are not often used in
 initialization of tabs
-(though they are required for the \fB?\fP program):
+(though they are required for the \fBtabs\fP program):
 .bP
 Almost all hardware terminals (at least those which supported tabs)
 initialized those to every \fIeight\fP columns:
@@ -3828,7 +3828,7 @@ files containing terminal descriptions
 .na
 .hy 0
 \fBinfocmp\fP(1),
-\fB?\fP(1),
+\fBtabs\fP(1),
 \fBtic\fP(1),
 \fBcurses\fP(3),
 \fBcurs_color\fP(3),

diff --git a/usr.bin/tput/tput.1 b/usr.bin/tput/tput.1
index d4e2561..31ae8b6 100644 (file)
--- a/usr.bin/tput/tput.1
+++ b/usr.bin/tput/tput.1
@@ -1,5 +1,5 @@
 '\" t
-.\"    $OpenBSD: tput.1,v 1.27 2023/10/17 09:52:11 nicm Exp $
+.\"    $OpenBSD: tput.1,v 1.28 2024/08/23 15:10:40 nicm Exp $
 .\"***************************************************************************
 .\" Copyright 2018-2022,2023 Thomas E. Dickey                                *
 .\" Copyright 1998-2016,2017 Free Software Foundation, Inc.                  *
@@ -607,9 +607,9 @@ as ncurses.
 NetBSD curses documents different exit codes which do not correspond
 to either ncurses or X/Open.
 .SH SEE ALSO
-\fB?\fP(\*n),
+\fBclear\fP(\*n),
 \fBstty\fP(1),
-\fB?\fP(\*n),
+\fBtabs\fP(\*n),
 \fBtset\fP(\*n),
 \fBtermcap\fP(3),
 \fBterminfo\fP(5).

diff --git a/usr.bin/tset/tset.1 b/usr.bin/tset/tset.1
index 9c9b55a..8d23968 100644 (file)
--- a/usr.bin/tset/tset.1
+++ b/usr.bin/tset/tset.1
@@ -1,4 +1,4 @@
-.\"    $OpenBSD: tset.1,v 1.25 2023/10/17 09:52:11 nicm Exp $
+.\"    $OpenBSD: tset.1,v 1.26 2024/08/23 15:10:40 nicm Exp $
 .\"
 .\"***************************************************************************
 .\" Copyright 2018-2022,2023 Thomas E. Dickey                                *
@@ -40,11 +40,11 @@
 .el    .IP \(bu 2
 ..
 .SH NAME
-\fBtset\fP, \fB?\fP \- terminal initialization
+\fBtset\fP, \fBreset\fP \- terminal initialization
 .SH SYNOPSIS
 \fBtset\fP [\fB\-IQVcqrsw\fP] [\fB\-\fP] [\fB\-e\fP \fIch\fP] [\fB\-i\fP \fIch\fP] [\fB\-k\fP \fIch\fP] [\fB\-m\fP \fImapping\fP] [\fIterminal\fP]
 .br
-\fB?\fP [\fB\-IQVcqrsw\fP] [\fB\-\fP] [\fB\-e\fP \fIch\fP] [\fB\-i\fP \fIch\fP] [\fB\-k\fP \fIch\fP] [\fB\-m\fP \fImapping\fP] [\fIterminal\fP]
+\fBreset\fP [\fB\-IQVcqrsw\fP] [\fB\-\fP] [\fB\-e\fP \fIch\fP] [\fB\-i\fP \fIch\fP] [\fB\-k\fP \fIch\fP] [\fB\-m\fP \fImapping\fP] [\fIterminal\fP]
 .SH DESCRIPTION
 .SS tset - initialization
 This program initializes terminals.
@@ -118,7 +118,7 @@ Finally, if the erase, interrupt and line kill characters have changed,
 or are not set to their default values, their values are displayed to the
 standard error output.
 .SS reset - reinitialization
-When invoked as \fB?\fP, \fBtset\fP sets the terminal
+When invoked as \fBreset\fP, \fBtset\fP sets the terminal
 modes to \*(``sane\*('' values:
 .bP
 sets cooked and echo modes,
@@ -134,12 +134,12 @@ doing the terminal initialization described above.
 Also, rather than using the terminal \fIinitialization\fP strings,
 it uses the terminal \fIreset\fP strings.
 .PP
-The \fB?\fP command is useful
+The \fBreset\fP command is useful
 after a program dies leaving a terminal in an abnormal state:
 .bP
 you may have to type
 .sp
-    \fI<LF>\fB?\fI<LF>\fR
+    \fI<LF>\fBreset\fI<LF>\fR
 .sp
 (the line-feed character is normally control-J) to get the terminal
 to work, as carriage-return may no longer work in the abnormal state.
@@ -313,7 +313,7 @@ S. Raymond <esr@snark.thyrsus.com>.
 .SH COMPATIBILITY
 Neither IEEE Std 1003.1/The Open Group Base Specifications Issue 7
 (POSIX.1-2008) nor
-X/Open Curses Issue 7 documents \fBtset\fP or \fB?\fP.
+X/Open Curses Issue 7 documents \fBtset\fP or \fBreset\fP.
 .PP
 The AT&T \fBtput\fP utility (AIX, HPUX, Solaris)
 incorporated the terminal-mode manipulation as well as termcap-based features
@@ -370,7 +370,7 @@ although it is strongly recommended that such usage be fixed to
 explicitly specify the character.
 .PP
 As of 4.4BSD,
-executing \fBtset\fP as \fB?\fP no longer implies the \fB\-Q\fP option.
+executing \fBtset\fP as \fBreset\fP no longer implies the \fB\-Q\fP option.
 Also, the interaction between the \- option and the \fIterminal\fP
 argument in some historic implementations of \fBtset\fP has been removed.
 .PP