int amdgpu_noretry = -1;
int amdgpu_force_asic_type = -1;
int amdgpu_tmz = -1; /* auto */
+uint amdgpu_freesync_vid_mode;
int amdgpu_reset_method = -1; /* auto */
int amdgpu_num_kcq = -1;
int amdgpu_smartshift_bias;
MODULE_PARM_DESC(tmz, "Enable TMZ feature (-1 = auto (default), 0 = off, 1 = on)");
module_param_named(tmz, amdgpu_tmz, int, 0444);
+/**
+ * DOC: freesync_video (uint)
+ * Enable the optimization to adjust front porch timing to achieve seamless
+ * mode change experience when setting a freesync supported mode for which full
+ * modeset is not needed.
+ *
+ * The Display Core will add a set of modes derived from the base FreeSync
+ * video mode into the corresponding connector's mode list based on commonly
+ * used refresh rates and VRR range of the connected display, when users enable
+ * this feature. From the userspace perspective, they can see a seamless mode
+ * change experience when the change between different refresh rates under the
+ * same resolution. Additionally, userspace applications such as Video playback
+ * can read this modeset list and change the refresh rate based on the video
+ * frame rate. Finally, the userspace can also derive an appropriate mode for a
+ * particular refresh rate based on the FreeSync Mode and add it to the
+ * connector's mode list.
+ *
+ * Note: This is an experimental feature.
+ *
+ * The default value: 0 (off).
+ */
+MODULE_PARM_DESC(
+ freesync_video,
+ "Enable freesync modesetting optimization feature (0 = off (default), 1 = on)");
+module_param_named(freesync_video, amdgpu_freesync_vid_mode, uint, 0444);
+
/**
* DOC: reset_method (int)
* GPU reset method (-1 = auto (default), 0 = legacy, 1 = mode0, 2 = mode1, 3 = mode2, 4 = baco)
*/
DRM_DEBUG_DRIVER("No preferred mode found\n");
} else {
- recalculate_timing = is_freesync_video_mode(&mode, aconnector);
+ recalculate_timing = amdgpu_freesync_vid_mode &&
+ is_freesync_video_mode(&mode, aconnector);
if (recalculate_timing) {
freesync_mode = get_highest_refresh_rate_mode(aconnector, false);
drm_mode_copy(&saved_mode, &mode);
struct amdgpu_dm_connector *amdgpu_dm_connector =
to_amdgpu_dm_connector(connector);
- if (!edid)
+ if (!(amdgpu_freesync_vid_mode && edid))
return;
if (amdgpu_dm_connector->max_vfreq - amdgpu_dm_connector->min_vfreq > 10)
* TODO: Refactor this function to allow this check to work
* in all conditions.
*/
- if (dm_new_crtc_state->stream &&
+ if (amdgpu_freesync_vid_mode &&
+ dm_new_crtc_state->stream &&
is_timing_unchanged_for_freesync(new_crtc_state, old_crtc_state))
goto skip_modeset;
if (!dm_old_crtc_state->stream)
goto skip_modeset;
- if (dm_new_crtc_state->stream &&
+ if (amdgpu_freesync_vid_mode && dm_new_crtc_state->stream &&
is_timing_unchanged_for_freesync(new_crtc_state,
old_crtc_state)) {
new_crtc_state->mode_changed = false;
set_freesync_fixed_config(dm_new_crtc_state);
goto skip_modeset;
- } else if (aconnector &&
+ } else if (amdgpu_freesync_vid_mode && aconnector &&
is_freesync_video_mode(&new_crtc_state->mode,
aconnector)) {
struct drm_display_mode *high_mode;