Test that ping6 fragments with ethernet padding get reassembled

correctly.

diff --git a/regress/sys/netinet6/frag6/Makefile b/regress/sys/netinet6/frag6/Makefile
index 585ec1a..cfdb027 100644 (file)
--- a/regress/sys/netinet6/frag6/Makefile
+++ b/regress/sys/netinet6/frag6/Makefile
@@ -1,4 +1,4 @@
-#      $OpenBSD: Makefile,v 1.10 2014/07/11 18:25:50 bluhm Exp $
+#      $OpenBSD: Makefile,v 1.11 2015/04/15 21:29:15 bluhm Exp $
 
 # The following ports must be installed:
 #
@@ -106,6 +106,13 @@ run-regress-frag6-opt: addr.py
        @echo Check ping6 destination option reassembly
        ${SUDO} ${PYTHON}frag6_opt.py
 
+# The ethernet frame has some padding that must be ignored by reassembly
+TARGETS +=     frag6-padding
+run-regress-frag6-padding: addr.py
+       @echo '\n======== $@ ========'
+       @echo Check ping6 ethernet padding
+       ${SUDO} ${PYTHON}frag6_padding.py
+
 # fragmented packet with head overlapping first fragment
 TARGETS +=     frag6-overhead0
 run-regress-frag6-overhead0: addr.py

diff --git a/regress/sys/netinet6/frag6/frag6_padding.py b/regress/sys/netinet6/frag6/frag6_padding.py
new file mode 100644 (file)
index 0000000..714defe
--- /dev/null
+++ b/regress/sys/netinet6/frag6/frag6_padding.py
@@ -0,0 +1,46 @@
+#!/usr/local/bin/python2.7
+# send 2 non-overlapping ping6 fragments with ethernet padding
+
+# |--------|XX|
+#          |----|XX|
+
+import os
+from addr import *
+from scapy.all import *
+
+pid=os.getpid()
+payload="ABCDEFGHIJKLMNOP"
+padding="0123"
+packet=IPv6(src=SRC_OUT6, dst=DST_IN6)/ICMPv6EchoRequest(id=pid, data=payload)
+frag=[]
+frag.append(IPv6ExtHdrFragment(nh=58, id=pid, m=1)/str(packet)[40:56])
+frag.append(IPv6ExtHdrFragment(nh=58, id=pid, offset=2)/str(packet)[56:64])
+eth=[]
+for f in frag:
+       pkt=str(IPv6(src=SRC_OUT6, dst=DST_IN6)/f) + padding
+       eth.append(Ether(src=SRC_MAC, dst=DST_MAC, type=0x86dd)/pkt)
+
+if os.fork() == 0:
+       time.sleep(1)
+       sendp(eth, iface=SRC_IF)
+       os._exit(0)
+
+ans=sniff(iface=SRC_IF, timeout=3, filter=
+    "ip6 and src "+DST_IN6+" and dst "+SRC_OUT6+" and icmp6")
+for a in ans:
+       if a and a.type == ETH_P_IPV6 and \
+           ipv6nh[a.payload.nh] == 'ICMPv6' and \
+           icmp6types[a.payload.payload.type] == 'Echo Reply':
+               id=a.payload.payload.id
+               print "id=%#x" % (id)
+               if id != pid:
+                       print "WRONG ECHO REPLY ID"
+                       exit(2)
+               data=a.payload.payload.data
+               print "payload=%s" % (data)
+               if data == payload:
+                       exit(0)
+               print "PAYLOAD!=%s" % (payload)
+               exit(1)
+print "NO ECHO REPLY"
+exit(2)