+++ /dev/null
-.\" $OpenBSD: lmc.4,v 1.27 2015/01/15 20:37:36 schwarze Exp $
-.\"
-.\" Copyright (c) 1999 Chris Cappuccio
-.\"
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY EXPRESS OR
-.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-.\" IN NO EVENT SHALL THE DEVELOPERS BE LIABLE FOR ANY DIRECT, INDIRECT,
-.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-.\"
-.Dd $Mdocdate: January 15 2015 $
-.Dt LMC 4
-.Os
-.Sh NAME
-.Nm lmc
-.Nd Lan Media Corporation SSI/T1/DS1/HSSI/DS3 card device
-.Sh SYNOPSIS
-.Cd "lmc* at pci?"
-.Sh DESCRIPTION
-The
-.Nm
-driver provides support for the Lan Media Corporation SSI, T1/DS1, HSSI, and DS3
-PCI WAN adapters based on the DEC 21140 Ethernet chip.
-The adapters use a DEC 21140 Ethernet chip for the PCI bus interface.
-Leaving the bus interface chip, the data path goes through a field programmable
-gate array, where HDLC processing is accomplished.
-Leaving the FPGA, there are FIFO buffers and the DS1, DS3, and V.35 drive
-circuitry.
-.Pp
-The intent is to provide a synchronous serial link with HDLC framing at speeds
-of up to 10Mbps (for the SSI card), 52Mbps (for the HSSI card), BNC connectors
-for 45Mbps operation without a CSU/DSU (DS3 card), and an RJ45 jack for
-T1/E1 operation without a CSU/DSU (T1/DS1 card).
-.Pp
-The card will automatically use HDLC framing and defaults to external clock
-source.
-For the DS1 and DS3 cards with built-in CSU/DSU functionality,
-the clock source is always external (from CSU/DSU).
-The ability to set cable length is not currently implemented.
-.Pp
-Using the
-.Xr sppp 4
-driver, you can also use the ppp protocol.
-In either case, the
-.Nm
-interface should be configured as a point-to-point
-link.
-.Sh DIAGNOSTICS
-.Bl -diag
-.It "lmc0: couldn't map interrupt"
-A fatal initialization error has occurred.
-.It "lmc0: couldn't establish interrupt"
-A fatal initialization error has occurred.
-.It "lmc0: enabling keepalive"
-Cisco HDLC keepalive packets will be transmitted.
-.It "lmc0: disabling keepalive"
-Cisco HDLC keepalive packets will not be transmitted.
-.It "lmc0: clock internal"
-The card is using internal clocking for the line.
-.It "lmc0: clock external"
-The card is using external clocking for the line.
-.It "lmc0: asserting DTR and RTS"
-The card is sending DTR and RTS signals on the line.
-.It "lmc0: deasserting DTR and RTS"
-The card is not sending DTR and RTS signals on the line.
-.It "lmc0: Abnormal interrupt"
-The card received an incomplete request.
-This may be a sign of a hardware fault.
-.It "lmc0: tx_intr: failed to dequeue mbuf?!?"
-Only available if compiled with LMC_DEBUG.
-.It "lmc0: txput: tx not running"
-Problem from tulip.
-Only available if compiled with LMC_DEBUG.
-.El
-.Sh SEE ALSO
-.Xr netintro 4 ,
-.Xr sppp 4 ,
-.Xr ifconfig 8 ,
-.Xr lmccontrol 8
-.Sh AUTHORS
-.An -nosplit
-The
-.Nm
-device driver was written by
-.An Michael Graff ,
-and was derived in part from
-.An Matt Thomas Ns '
-.Xr de 4
-driver.
-The
-.Ox
-port and manual page are from
-.An Chris Cappuccio .
-Later enhancements to support the LMC1200 card are based on LMC's
-Linux driver.
+++ /dev/null
-.\" $OpenBSD: san.4,v 1.10 2015/01/15 20:37:36 schwarze Exp $
-.\"
-.\" Copyright (c) 2001-2004 Sangoma Technologies (SAN)
-.\" All rights reserved. www.sangoma.com
-.\"
-.\"This code is written by Alex Feldman <al.feldman@sangoma.com> for SAN.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above
-.\" copyright notice, this list of conditions and the following disclaimer
-.\" in the documentation and/or other materials provided with the
-.\" distribution.
-.\" 3. Neither the name of Sangoma Technologies nor the names of its
-.\" contributors may be used to endorse or promote products derived
-.\" from this software without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY SANGOMA TECHNOLOGIES AND CONTRIBUTORS
-.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-.\" TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-.\" PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
-.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
-.\" THE POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\"
-.Dd $Mdocdate: January 15 2015 $
-.Dt SAN 4
-.Os
-.Sh NAME
-.Nm san
-.Nd Sangoma Technologies AFT T1/E1 network device
-.Sh SYNOPSIS
-.Cd "san* at pci?"
-.Sh DESCRIPTION
-The
-.Nm
-device driver supports the Sangoma Technologies Inc AFT Series Network
-cards.
-This includes the following models:
-.Pp
-.Bl -item -offset indent -compact
-.It
-Sangoma AFT A101 PCI
-.It
-Sangoma AFT A102 PCI
-.El
-.Pp
-The following media types and options (as given to
-.Xr ifconfig 8 )
-are supported:
-.Bl -tag -width xxx -offset indent
-.It Cm media No T1
-Configure Sangoma card for T1, B8ZS, ESF, all channels
-(default).
-.It Cm media No T1-AMI
-Configure Sangoma card for T1, AMI, ESF, all channels.
-.It Cm media No E1
-Configure Sangoma card for E1, HDB3, NCRC4, all channels.
-.It Cm media No E1-AMI
-Configure Sangoma card for E1, AMI, NCRC4, all channels.
-.El
-.Pp
-If no media options are present, the
-.Nm
-driver places the card into default mode (T1, B8ZS, ESF, all channels).
-.Pp
-Use
-.Xr ifconfig 8
-to change the timeslot range for this card.
-The following format is supported:
-.Bl -tag -width xxx -offset indent
-.It Cm # ifconfig san0 timeslot all
-Enable all channels for this card.
-.It Cm # ifconfig san0 timeslot 1-10
-Enable channels 1-10 for this card.
-.It Cm # ifconfig san0 timeslot 1-10.14-15.20
-Enable channels 1-10, 14-15 and 20 for this card.
-.El
-.Pp
-If the timeslot option is not present, the
-.Nm
-driver configures the card to use all the channels.
-.Sh DIAGNOSTICS
-.Bl -diag
-.It "san0: couldn't map memory"
-A fatal initialization error has occurred.
-.It "san0: No PCI memory allocated for CPU #B"
-A fatal initialization error has occurred.
-.It "san0: couldn't map interrupt"
-A fatal initialization error has occurred.
-.It "san0: IRQ not allocated"
-A fatal initialization error has occurred.
-.El
-.Sh SEE ALSO
-.Xr ifmedia 4 ,
-.Xr pci 4 ,
-.Xr hostname.if 5 ,
-.Xr ifconfig 8
-.Sh HISTORY
-The
-.Nm
-device driver first appeared in
-.Ox 3.6 .
-.Sh AUTHORS
-The
-.Nm
-device driver and this manual page were written by
-.An Alex Feldman .
-.Sh BUGS
-There is no hardware documentation.
-.Pp
-There appears to be a memory corruption bug during device
-initialization.
-.Pp
-Since Sangoma stopped supporting the driver,
-it is unlikely that these bugs will be fixed.
projects / openbsd / commitdiff