/*
-** Add the ability to override 'extern'
+** Provide the ability to override linkage features of the interface.
*/
#ifndef SQLITE_EXTERN
# define SQLITE_EXTERN extern
#endif
+#ifndef SQLITE_API
+# define SQLITE_API
+#endif
+#ifndef SQLITE_CDECL
+# define SQLITE_CDECL
+#endif
+#ifndef SQLITE_STDCALL
+# define SQLITE_STDCALL
+#endif
/*
** These no-op macros are used in front of interfaces to mark those
** [sqlite3_libversion_number()], [sqlite3_sourceid()],
** [sqlite_version()] and [sqlite_source_id()].
*/
-#define SQLITE_VERSION "3.8.8.3"
-#define SQLITE_VERSION_NUMBER 3008008
+#define SQLITE_VERSION "3.8.9"
+#define SQLITE_VERSION_NUMBER 3008009
#define SQLITE_SOURCE_ID "OpenBSD"
/*
** of the [sqlite3_io_methods] object and for the [sqlite3_file_control()]
** interface.
**
+** <ul>
+** <li>[[SQLITE_FCNTL_LOCKSTATE]]
** The [SQLITE_FCNTL_LOCKSTATE] opcode is used for debugging. This
** opcode causes the xFileControl method to write the current state of
** the lock (one of [SQLITE_LOCK_NONE], [SQLITE_LOCK_SHARED],
** [SQLITE_LOCK_RESERVED], [SQLITE_LOCK_PENDING], or [SQLITE_LOCK_EXCLUSIVE])
** into an integer that the pArg argument points to. This capability
-** is used during testing and only needs to be supported when SQLITE_TEST
-** is defined.
-** <ul>
+** is used during testing and is only available when the SQLITE_TEST
+** compile-time option is used.
+**
** <li>[[SQLITE_FCNTL_SIZE_HINT]]
** The [SQLITE_FCNTL_SIZE_HINT] opcode is used by SQLite to give the VFS
** layer a hint of how large the database file will grow to be during the
** [PRAGMA] processing continues. ^If the [SQLITE_FCNTL_PRAGMA]
** file control returns [SQLITE_OK], then the parser assumes that the
** VFS has handled the PRAGMA itself and the parser generates a no-op
-** prepared statement. ^If the [SQLITE_FCNTL_PRAGMA] file control returns
+** prepared statement if result string is NULL, or that returns a copy
+** of the result string if the string is non-NULL.
+** ^If the [SQLITE_FCNTL_PRAGMA] file control returns
** any result code other than [SQLITE_OK] or [SQLITE_NOTFOUND], that means
** that the VFS encountered an error while handling the [PRAGMA] and the
** compilation of the PRAGMA fails with an error. ^The [SQLITE_FCNTL_PRAGMA]
** pointed to by the pArg argument. This capability is used during testing
** and only needs to be supported when SQLITE_TEST is defined.
**
+** <li>[[SQLITE_FCNTL_WAL_BLOCK]]
+** The [SQLITE_FCNTL_WAL_BLOCK] is a signal to the VFS layer that it might
+** be advantageous to block on the next WAL lock if the lock is not immediately
+** available. The WAL subsystem issues this signal during rare
+** circumstances in order to fix a problem with priority inversion.
+** Applications should <em>not</em> use this file-control.
+**
** </ul>
*/
#define SQLITE_FCNTL_LOCKSTATE 1
-#define SQLITE_GET_LOCKPROXYFILE 2
-#define SQLITE_SET_LOCKPROXYFILE 3
-#define SQLITE_LAST_ERRNO 4
+#define SQLITE_FCNTL_GET_LOCKPROXYFILE 2
+#define SQLITE_FCNTL_SET_LOCKPROXYFILE 3
+#define SQLITE_FCNTL_LAST_ERRNO 4
#define SQLITE_FCNTL_SIZE_HINT 5
#define SQLITE_FCNTL_CHUNK_SIZE 6
#define SQLITE_FCNTL_FILE_POINTER 7
#define SQLITE_FCNTL_SYNC 21
#define SQLITE_FCNTL_COMMIT_PHASETWO 22
#define SQLITE_FCNTL_WIN32_SET_HANDLE 23
+#define SQLITE_FCNTL_WAL_BLOCK 24
+
+/* deprecated names */
+#define SQLITE_GET_LOCKPROXYFILE SQLITE_FCNTL_GET_LOCKPROXYFILE
+#define SQLITE_SET_LOCKPROXYFILE SQLITE_FCNTL_SET_LOCKPROXYFILE
+#define SQLITE_LAST_ERRNO SQLITE_FCNTL_LAST_ERRNO
+
/*
** CAPI3REF: Mutex Handle
** <li> [sqlite3_memory_used()]
** <li> [sqlite3_memory_highwater()]
** <li> [sqlite3_soft_heap_limit64()]
-** <li> [sqlite3_status()]
+** <li> [sqlite3_status64()]
** </ul>)^
** ^Memory allocation statistics are enabled by default unless SQLite is
** compiled with [SQLITE_DEFAULT_MEMSTATUS]=0 in which case memory
** compiled for Windows with the [SQLITE_WIN32_MALLOC] pre-processor macro
** defined. ^SQLITE_CONFIG_WIN32_HEAPSIZE takes a 32-bit unsigned integer value
** that specifies the maximum size of the created heap.
-** </dl>
**
** [[SQLITE_CONFIG_PCACHE_HDRSZ]]
** <dt>SQLITE_CONFIG_PCACHE_HDRSZ
**
** These routines are work-alikes of the "printf()" family of functions
** from the standard C library.
+** These routines understand most of the common K&R formatting options,
+** plus some additional non-standard formats, detailed below.
+** Note that some of the more obscure formatting options from recent
+** C-library standards are omitted from this implementation.
**
** ^The sqlite3_mprintf() and sqlite3_vmprintf() routines write their
** results into memory obtained from [sqlite3_malloc()].
** These routines all implement some additional formatting
** options that are useful for constructing SQL statements.
** All of the usual printf() formatting options apply. In addition, there
-** is are "%q", "%Q", and "%z" options.
+** is are "%q", "%Q", "%w" and "%z" options.
**
** ^(The %q option works like %s in that it substitutes a nul-terminated
** string from the argument list. But %q also doubles every '\'' character.
** The code above will render a correct SQL statement in the zSQL
** variable even if the zText variable is a NULL pointer.
**
+** ^(The "%w" formatting option is like "%q" except that it expects to
+** be contained within double-quotes instead of single quotes, and it
+** escapes the double-quote character instead of the single-quote
+** character.)^ The "%w" formatting option is intended for safely inserting
+** table and column names into a constructed SQL statement.
+**
** ^(The "%z" formatting option works like "%s" but with the
** addition that after the string has been read and copied into
** the result, [sqlite3_free()] is called on the input string.)^
/*
** CAPI3REF: Error Codes And Messages
**
-** ^The sqlite3_errcode() interface returns the numeric [result code] or
-** [extended result code] for the most recent failed sqlite3_* API call
-** associated with a [database connection]. If a prior API call failed
-** but the most recent API call succeeded, the return value from
-** sqlite3_errcode() is undefined. ^The sqlite3_extended_errcode()
+** ^If the most recent sqlite3_* API call associated with
+** [database connection] D failed, then the sqlite3_errcode(D) interface
+** returns the numeric [result code] or [extended result code] for that
+** API call.
+** If the most recent API call was successful,
+** then the return value from sqlite3_errcode() is undefined.
+** ^The sqlite3_extended_errcode()
** interface is the same except that it always returns the
** [extended result code] even when extended result codes are
** disabled.
** interfaces use UTF-8, and sqlite3_prepare16() and sqlite3_prepare16_v2()
** use UTF-16.
**
-** ^If the nByte argument is less than zero, then zSql is read up to the
-** first zero terminator. ^If nByte is non-negative, then it is the maximum
-** number of bytes read from zSql. ^When nByte is non-negative, the
-** zSql string ends at either the first '\000' or '\u0000' character or
-** the nByte-th byte, whichever comes first. If the caller knows
-** that the supplied string is nul-terminated, then there is a small
-** performance advantage to be gained by passing an nByte parameter that
-** is equal to the number of bytes in the input string <i>including</i>
-** the nul-terminator bytes as this saves SQLite from having to
-** make a copy of the input string.
+** ^If the nByte argument is negative, then zSql is read up to the
+** first zero terminator. ^If nByte is positive, then it is the
+** number of bytes read from zSql. ^If nByte is zero, then no prepared
+** statement is generated.
+** If the caller knows that the supplied string is nul-terminated, then
+** there is a small performance advantage to passing an nByte parameter that
+** is the number of bytes in the input string <i>including</i>
+** the nul-terminator.
**
** ^If pzTail is not NULL then *pzTail is made to point to the first byte
** past the end of the first SQL statement in zSql. These routines only
** These functions are [deprecated]. In order to maintain
** backwards compatibility with older code, these functions continue
** to be supported. However, new applications should avoid
-** the use of these functions. To help encourage people to avoid
-** using these functions, we are not going to tell you what they do.
+** the use of these functions. To encourage programmers to avoid
+** these functions, we will not explain what they do.
*/
#ifndef SQLITE_OMIT_DEPRECATED
SQLITE_DEPRECATED int sqlite3_aggregate_count(sqlite3_context*);
** future releases of SQLite. Applications that care about shared
** cache setting should set it explicitly.
**
+** Note: This method is disabled on MacOS X 10.7 and iOS version 5.0
+** and will always return SQLITE_MISUSE. On those systems,
+** shared cache mode should be enabled per-database connection via
+** [sqlite3_open_v2()] with [SQLITE_OPEN_SHAREDCACHE].
+**
** This interface is threadsafe on processors where writing a
** 32-bit integer is atomic.
**
*/
struct sqlite3_vtab {
const sqlite3_module *pModule; /* The module for this virtual table */
- int nRef; /* NO LONGER USED */
+ int nRef; /* Number of open cursors */
char *zErrMsg; /* Error message from sqlite3_mprintf() */
/* Virtual table implementations will typically add additional fields */
};
#define SQLITE_TESTCTRL_BYTEORDER 22
#define SQLITE_TESTCTRL_ISINIT 23
#define SQLITE_TESTCTRL_SORTER_MMAP 24
-#define SQLITE_TESTCTRL_LAST 24
+#define SQLITE_TESTCTRL_IMPOSTER 25
+#define SQLITE_TESTCTRL_LAST 25
/*
** CAPI3REF: SQLite Runtime Status
**
-** ^This interface is used to retrieve runtime status information
+** ^These interfaces are used to retrieve runtime status information
** about the performance of SQLite, and optionally to reset various
** highwater marks. ^The first argument is an integer code for
** the specific parameter to measure. ^(Recognized integer codes
** ^(Other parameters record only the highwater mark and not the current
** value. For these latter parameters nothing is written into *pCurrent.)^
**
-** ^The sqlite3_status() routine returns SQLITE_OK on success and a
-** non-zero [error code] on failure.
+** ^The sqlite3_status() and sqlite3_status64() routines return
+** SQLITE_OK on success and a non-zero [error code] on failure.
**
-** This routine is threadsafe but is not atomic. This routine can be
-** called while other threads are running the same or different SQLite
-** interfaces. However the values returned in *pCurrent and
-** *pHighwater reflect the status of SQLite at different points in time
-** and it is possible that another thread might change the parameter
-** in between the times when *pCurrent and *pHighwater are written.
+** If either the current value or the highwater mark is too large to
+** be represented by a 32-bit integer, then the values returned by
+** sqlite3_status() are undefined.
**
** See also: [sqlite3_db_status()]
*/
int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag);
+int sqlite3_status64(
+ int op,
+ sqlite3_int64 *pCurrent,
+ sqlite3_int64 *pHighwater,
+ int resetFlag
+);
/*
** is not a permanent error and does not affect the return value of
** sqlite3_backup_finish().
**
-** [[sqlite3_backup__remaining()]] [[sqlite3_backup_pagecount()]]
+** [[sqlite3_backup_remaining()]] [[sqlite3_backup_pagecount()]]
** <b>sqlite3_backup_remaining() and sqlite3_backup_pagecount()</b>
**
-** ^Each call to sqlite3_backup_step() sets two values inside
-** the [sqlite3_backup] object: the number of pages still to be backed
-** up and the total number of pages in the source database file.
-** The sqlite3_backup_remaining() and sqlite3_backup_pagecount() interfaces
-** retrieve these two values, respectively.
-**
-** ^The values returned by these functions are only updated by
-** sqlite3_backup_step(). ^If the source database is modified during a backup
-** operation, then the values are not updated to account for any extra
-** pages that need to be updated or the size of the source database file
-** changing.
+** ^The sqlite3_backup_remaining() routine returns the number of pages still
+** to be backed up at the conclusion of the most recent sqlite3_backup_step().
+** ^The sqlite3_backup_pagecount() routine returns the total number of pages
+** in the source database at the conclusion of the most recent
+** sqlite3_backup_step().
+** ^(The values returned by these functions are only updated by
+** sqlite3_backup_step(). If the source database is modified in a way that
+** changes the size of the source database or the number of pages remaining,
+** those changes are not reflected in the output of sqlite3_backup_pagecount()
+** and sqlite3_backup_remaining() until after the next
+** sqlite3_backup_step().)^
**
** <b>Concurrent Usage of Database Handles</b>
**
projects / openbsd / commitdiff