--- /dev/null
+dnl $OpenBSD: contents,v 1.1 2021/05/02 23:48:14 drahn Exp $
+TopPart
+
+OpenBSDminiroot
+
+OpenBSDdistsets
+
+OpenBSDbsd
+
+OpenBSDrd
+dnl not yet...
+dnl OpenBSDcd
+
+DistributionDescription(eight)
+
+OpenBSDbase(92997156,284219392)
+
+OpenBSDcomp(57727901,212260864)
+
+OpenBSDgame(2768356,9330688)
+
+OpenBSDman(7322823,31395840)
+
+OpenBSDxbase(16439912,71249920)
+
+OpenBSDxfont(40291103,59377664)
+
+OpenBSDxserv(6446904,18399232)
+
+OpenBSDxshare(4524534,30216192)
--- /dev/null
+dnl $OpenBSD: features,v 1.1 2021/05/02 23:48:14 drahn Exp $
+dnl
+dnl This file lists almost all the conditional features of this port,
+dnl which are used to provide accurate installation notes.
+dnl
+dnl Information about the installer script features should be in sync with
+dnl src/distrib/arm64/ramdisk/install.md
+dnl and the list files in
+dnl src/distrib/arm64/ramdisk/list
+dnl
+dnl ====
+dnl
+dnl architecture name (for the packages directory)
+define({:-MACHINE_ARCH-:},riscv64)dnl
+dnl
+dnl define if /sbin/kbd exists on the media
+define({:-MDKBD-:},)dnl
+dnl
+dnl define if serial consoles needs to be enabled in /etc/ttys
+dnl (i.e. md_consoleinfo is not empty)
+define({:-MDSERCONS-:},)dnl
+dnl
+dnl define if SMP kernels are provided
+define({:-MDSMP-:},)dnl
+dnl
+dnl define if shared libraries are provided
+define({:-MDSO-:},1)dnl
+dnl
+dnl define if some media have timezone information (TZ in their list)
+define({:-MDTZ-:},1)dnl
+dnl
+dnl define if glass console is possible
+dnl (XXX does not imply availability of X servers though)
+dnl define({:-MDX-:},)dnl
+dnl
+dnl define if the X server can't start until machdep.allow_aperture is set
+dnl define({:-MDXAPERTURE-:},)dnl
+dnl
+dnl define if the X server can start without a configuration file
+dnl define({:-MDXDM-:},)dnl
--- /dev/null
+dnl $OpenBSD: hardware,v 1.1 2021/05/02 23:48:14 drahn Exp $
+The following machines are targeted by OpenBSD/MACHINE:
+
+ Qemu riscv64
--- /dev/null
+dnl $OpenBSD: install,v 1.1 2021/05/02 23:48:14 drahn Exp $
+OpenBSDInstallPrelude
+
+OpenBSDInstallPart2
+
+OpenBSDInstallPart3(,"sd0")
+
+OpenBSDInstallPart4
+
+OpenBSDInstallMBRPart1
+
+dnl OpenBSDInstallMBRPart2(indeed)
+ The fdisk(8) utility will be invoked to let you edit your MBR
+ partitioning. The current MBR partitions defined will be
+ displayed and you will be allowed to modify them, and add new
+ partitions.
+
+ The setup will need two partitions, one 'OpenBSD' for the
+ OpenBSD/MACHINE installation, and one 'MSDOS' for the
+ U-Boot scripts/bootloader.
+
+ If you use the whole disk option, the install script
+ will create a small 'MSDOS' partition and use the rest of
+ the disk for the OpenBSD installation.
+
+ After your OpenBSD MBR partition has been set up, the real
+ partition setup can follow.
+
+OpenBSDInstallPart5
+
+OpenBSDInstallPart6({:-CD-ROM, -:})
+
+OpenBSDURLInstall
+
+OpenBSDCDROMInstall
+
+OpenBSDDISKInstall(,,{:-, MS-DOS-:})
+
+OpenBSDCommonInstall
+
+OpenBSDInstallWrapup
+
+OpenBSDCongratulations
+
+
+
+OpenBSDUnattendedInstallation
--- /dev/null
+dnl $OpenBSD: prep,v 1.1 2021/05/02 23:48:14 drahn Exp $
+Please be aware that OpenBSD support for this platform is far from
+complete.
+
+Qemu with opensbi and u-boot is the only tested environment.
+
+OpenBSD can be installed onto a disk by copying the miniroot for your
+board "miniroot{:--:}OSrev.img" image to an SD card.
+
+Booting from an SD card:
+
+ To use the miniroot image you will need another machine to plug the
+ SD card in to. Any machine type will do, as long as it supports SD card
+ storage devices. Under OpenBSD, it will appear as a ``sd'' device, for
+ example sd1.
+
+ Use the dd(1) utility to copy the miniroot to the SD card.
+ The command would likely be, under OpenBSD:
+ dd if=miniroot{:--:}OSrev.img of=/dev/rsd1c bs=1m
+
+ When you have connected the serial to your computer, a command such
+ as "cu -l cuaU0 -s 115200" (assuming cuaU0 is your serial port device)
+ should connect you to the board's console.
+
+Running EFI payloads with U-Boot:
+
+If the U-Boot target supports "distro_bootcmd" efiboot will automatically
+be loaded by placing bootaa64.efi into /efi/boot/bootaa64.efi on a FAT
+filesystem. With dtb files placed in in /vendor/, /dtbs/vendor/, or
+/dtb/current/vendor/.
+
+If the U-Boot target supports bootefi but not automatically finding it with
+"distro_bootcmd" then it must be loaded manually or by U-Boot commands or
+script.
+ => run findfdt
+ => load mmc 0:1 ${fdt_addr_r} ${fdtfile}
+ => load mmc 0:1 ${kernel_addr_r} efi/boot/bootaa64.efi
+ => bootefi ${kernel_addr_r} ${fdt_addr_r}
+The bootloader will then run and try to load sd0a:/bsd off an FFS
+filesystem after a timeout.
+
--- /dev/null
+dnl $OpenBSD: upgrade,v 1.1 2021/05/02 23:48:14 drahn Exp $
+OpenBSDUpgrade({:-your usual boot device-:})
--- /dev/null
+dnl $OpenBSD: whatis,v 1.1 2021/05/02 23:48:14 drahn Exp $
+
+OpenBSD/MACHINE is just starting to function, please port to more hardware.
--- /dev/null
+dnl $OpenBSD: xfer,v 1.1 2021/05/02 23:48:14 drahn Exp $
+
+Installation is supported from a media type, including:
+
+ Image files
+
+OpenBSDXferShortPrelude
+
+OpenBSDXferFFS
projects / openbsd / commitdiff