since ramdisk installation works much better.
+++ /dev/null
-# $NetBSD: Makefile,v 1.1 1995/07/18 04:13:06 briggs Exp $
-
-TOP= ${.CURDIR}/..
-
-.include "${TOP}/Makefile.inc"
-IMAGE= inst-${REV}.fs
-
-.include "${TOP}/inst-common/Makefile.inc"
+++ /dev/null
-#
-# $NetBSD: disktab.preinstall,v 1.1 1995/07/18 04:13:07 briggs Exp $
-#
-# Disk geometry and partition layout tables.
-# Key:
-# dt controller type
-# ty type of disk (fixed, removeable, simulated)
-# d[0-4] drive-type-dependent parameters
-# ns #sectors/track
-# nt #tracks/cylinder
-# nc #cylinders/disk
-# sc #sectors/cylinder, nc*nt default
-# su #sectors/unit, sc*nc default
-# se sector size, DEV_BSIZE default
-# rm rpm, 3600 default
-# sf supports bad144-style bad sector forwarding
-# sk sector skew per track, default 0
-# cs sector skew per cylinder, default 0
-# hs headswitch time, default 0
-# ts one-cylinder seek time, default 0
-# il sector interleave (n:1), 1 default
-# bs boot block size, default BBSIZE
-# sb superblock size, default SBSIZE
-# o[a-h] partition offsets in sectors
-# p[a-h] partition sizes in sectors
-# b[a-h] partition block sizes in bytes
-# f[a-h] partition fragment sizes in bytes
-# t[a-h] partition types (filesystem, swap, etc)
-#
-# All partition sizes reserve space for bad sector tables.
-# (5 cylinders needed for maintenance + replacement sectors)
-#
+++ /dev/null
-#
-# $NetBSD: dot.instutils,v 1.1 1995/07/18 04:13:08 briggs Exp $
-#
-# Copyright (c) 1994 Christopher G. Demetriou
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-# must display the following acknowledgement:
-# This product includes software developed by Christopher G. Demetriou.
-# 4. The name of the author may not be used to endorse or promote products
-# derived from this software without specific prior written permission
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-# Installation configuration utilites (functions), to get NetBSD configured
-# reasonably once it is installed on the hard disk. These are meant to be
-# invoked from the shell prompt, by people installing NetBSD.
-
-Configure()
-{
- DEV=/mnt/dev
- ETC=/mnt/etc
-
- echo "You will now be prompted for information about this"
- echo "machine. If you hit return, the default answer (in"
- echo "brackets) will be used."
-
- echo ""
- echo -n "What is this machine's hostname? [unknown.host.domain] "
- read hname
- if [ "$hname" = "" ]; then
- hname=unknown.host.domain
- fi
- echo $hname > ${ETC}/myname
- proto_domain=`echo $hname | sed -e 's/[^.]*\.//'`
-
- echo ""
- echo "What domain is this machine in (this is NOT its YP"
- echo -n "domain name)? [$proto_domain] "
- read dname
- if [ "$dname" = "" ]; then
- dname=$proto_domain
- fi
-
- echo "\a"
- if [ -e ${ETC}/sendmail.cf ]; then
- echo "WARNING: A default sendmail.cf exists, and probably"
- echo "needs to be tuned and/or replaced, to work properly at"
- echo "your site!"
- else
- echo "WARNING: No default sendmail.cf installed. Did you"
- echo "forget to install the 'etc' distribution?"
- fi
-
- echo "127.0.0.1 localhost localhost.$dname" > ${ETC}/hosts
-
- echo ""
- echo -n "Does this machine have an ethernet interface? [y] "
- read resp
- case "$resp" in
- n*)
- ;;
- *)
- intf=
- while [ "$intf" = "" ]; do
- echo -n "What is the primary interface name "
- echo -n "(e.g. ae0, etc)? "
- read intf
- done
- echo -n "What is the hostname for this interface? [$hname] "
- read ifname
- if [ "$ifname" = "" ]; then
- ifname=$hname
- fi
- ifaddr=
- while [ "$ifaddr" = "" ]; do
- echo -n "What is the IP address associated with "
- echo -n "interface ${intf}? "
- read ifaddr
- done
- echo "$ifaddr $ifname `echo $ifname | sed -e s/\.$dname//`" \
- >> ${ETC}/hosts
-
- echo -n "Does this interface have a special netmask? [n] "
- read resp
- case "$resp" in
- y*)
- echo -n "What is the netmask? [0xffffff00] "
- read ifnetmask
- if [ "$ifnetmask" = "" ]; then
- ifnetmask=0xffffff00
- fi
- ;;
- *)
- ifnetmask=
- ;;
- esac
-
- echo -n "Does this interface need additional flags? [n] "
- read resp
- case "$resp" in
- y*)
- echo -n "What flags? [link0] "
- read ifflags
- if [ "$ifflags" = "" ]; then
- ifflags=link0
- fi
- ;;
- *)
- ifflags=
- ;;
- esac
- echo "inet $ifname $ifnetmask $ifflags" > ${ETC}/hostname.$intf
-
- echo "\a"
- echo -n "WARNING: if you have any more ethernet interfaces, "
- echo "you will have to configure"
- echo -n "them by hand. Read the comments in /etc/netstart to"
- echo "learn how to do this."
- ;;
- esac
-
- echo ""
- echo -n "Making device nodes..."
- cd ${DEV}
- sh MAKEDEV all
- echo " done."
-
- sync
-
- echo "You may now reboot your machine with the shutdown command."
- echo " shutdown -r now"
- echo "to reboot or"
- echo " shutdown -h now"
- echo "to halt."
- echo "Remember to erase the miniroot name from the booter's"
- echo "booting preferences dialog box before booting again."
-}
+++ /dev/null
-#
-# $NetBSD: dot.profile,v 1.1 1995/07/18 04:13:09 briggs Exp $
-#
-# Copyright (c) 1994 Christopher G. Demetriou
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-# must display the following acknowledgement:
-# This product includes software developed by Christopher G. Demetriou.
-# 4. The name of the author may not be used to endorse or promote products
-# derived from this software without specific prior written permission
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-PATH=/sbin:/bin:/usr/bin:/usr/sbin:/
-export PATH
-TERM=vt200
-export TERM
-
-# set up some sane defaults
-echo 'erase ^?, werase ^H, kill ^U, intr ^C'
-stty newcrt werase ^H intr ^C kill ^U erase ^? 9600
-echo ''
-
-# pull in the function definitions that people will use from the shell prompt.
-. /.commonutils
-. /.instutils
-
-# run the installation script.
-umask 022
-install
+++ /dev/null
-#!/bin/sh
-#
-# $NetBSD: install.sh,v 1.1 1995/07/18 04:13:10 briggs Exp $
-#
-# Copyright (c) 1994 Christopher G. Demetriou
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-# must display the following acknowledgement:
-# This product includes software developed by Christopher G. Demetriou.
-# 4. The name of the author may not be used to endorse or promote products
-# derived from this software without specific prior written permission
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-# NetBSD installation script.
-# In a perfect world, this would be a nice C program, with a reasonable
-# user interface.
-
-FSTABDIR=/mnt/etc # /mnt/etc
-#DONTDOIT=echo
-
-VERSION=1.0
-FSTAB=${FSTABDIR}/fstab
-
-getresp() {
- read resp
- if [ "X$resp" = "X" ]; then
- resp=$1
- fi
-}
-
-getvar() {
- echo $(eval $(echo "echo \$$1"))
-}
-
-shiftvar() {
- local - var
- var="$1"
- list="$(getvar $var)"
- set -- $list
- shift
- setvar $var "$*"
-}
-
-getparts() {
- disklabel $1 2>/dev/null | sed -e '/^[ ][ ][ad-p]/!d' |
- sed -e 's,^[ ]*\([a-p]\):[ ]*[0-9]*[ ]*[0-9]*[ ][ ]*\([a-zA-Z0-9.]*\).*,\1 \2,' |
- sed -e ':a
- N;${s/\n/ /g;p;d;}
- ba'
-}
-
-getdrives() {
- local du thispart
- for du in /dev/r${drivetype}?a; do
- dd if=$du of=/dev/null bs=1b count=1 >/dev/null 2>&1
- if [ $? -eq 0 ]; then
- thisunit=`echo $du | sed -e 's,/dev/r\(...\)a,\1,g'`
- driveunits="$driveunits $thisunit"
- else
- continue;
- fi
- setvar $thisunit "$(getparts $thisunit)"
- export $thisunit
- done
- export drivenunits
-}
-
-prepdrive() {
- echo "which drive would you like to prepare next?"
- echo "choices are: ${driveunits}"
- echo ""
- getresp
- case $resp in
- *) ;;
- esac
-}
-
-echo "Welcome to the NetBSD ${VERSION} installation program."
-echo ""
-echo "This program is designed to help you put NetBSD on your hard disk,"
-echo "in a simple and rational way. Its main objective is to format,"
-echo "mount and create an fstab for your root (/) and user (/usr)"
-echo "partitions."
-echo ""
-echo "As with anything which modifies your hard drive's contents, this"
-echo "program can cause SIGNIFICANT data loss, and you are advised"
-echo "to make sure your hard drive is backed up before beginning the"
-echo "installation process."
-echo ""
-echo "Default answers are displyed in brackets after the questions."
-echo "You can hit Control-C at any time to quit, but if you do so at a"
-echo "prompt, you may have to hit return. Also, quitting in the middle of"
-echo "installation may leave your system in an inconsistent state."
-echo ""
-echo -n "Proceed with installation? [n] "
-getresp "n"
-case "$resp" in
- y*|Y*)
- echo "scanning for the root device"
- ;;
- *)
- echo ""
- echo "OK, then. Enter 'halt' at the prompt to halt the"
- echo "machine or 'reboot' to reboot it."
- exit
- ;;
-esac
-
-drivetype=sd
-sect_fwd=""
-
-# find out what units are possible for that disk, and query the user.
-getdrives
-for du in $driveunits; do
- set -- $(getvar $du)
- if [ $# -ge 2 -a "$1" = "a" -a "`echo $2 | sed -e 's,.*BSD.*,BSD,'`" = "BSD" ]; then
- rdev=$du
- fi
-done
-
-echo ""
-echo "The root device you have chosen is on: ${rdev}"
-echo ""
-# driveunits=`ls /dev/${drivetype}?a | sed -e 's,/dev/\(...\)a,\1,g'`
-if [ "X${driveunits}" = "X" ]; then
- echo "FATAL ERROR:"
- echo "No devices for disks of type '${drivetype}'."
- echo "This is probably a bug in the install disks."
- echo "Exiting install program."
- exit
-fi
-
-echo ""
-echo "THIS IS YOUR LAST CHANCE!!!"
-echo ""
-echo "(answering yes will format your root partition on $rdev)"
-echo -n "Are you SURE you want NetBSD installed on your hard drive? (yes/no) "
-answer=""
-while [ "$answer" = "" ]; do
- getresp
- case $resp in
- yes|YES)
- echo ""
- answer=yes
- ;;
- no|NO)
- echo ""
- echo -n "OK, then. enter 'halt' to halt the machine. "
- exit
- ;;
- *)
- echo -n "Please answer 'yes' or 'no'."
- ;;
- esac
-done
-echo "Initializing / (root) filesystem, and mounting..."
-$DONTDOIT newfs /dev/r${rdev}a $name
-$DONTDOIT mount -v /dev/${rdev}a /mnt
-echo ""
-echo -n "Creating a fstab..."
-mkdir -p $FSTABDIR
-echo "/dev/${rdev}a / ufs rw 1 1" > $FSTAB
-
-# get rid of this partition
-shiftvar $rdev
-shiftvar $rdev
-
-echo ""
-echo "Now lets setup your /usr file system"
-echo "(Once a valid input for drive and partition is seen"
-echo "it will be FORMATTED and inserted in the fstab.)"
-while [ "X$usrpart" = "X" ]; do
- resp=""
- drivename=""
- while [ "X$resp" = "X" ]; do
- echo "choices: $driveunits"
- echo "which drive do you want /usr on?"
- getresp
- set -- $driveunits
- while [ $# -gt 0 ]; do
- if [ "X$resp" = "X$1" ]; then
- drivename=$1
- break;
- else
- shift
- fi
- done
- if [ "X$drivename" != "X" ]; then
- break
- fi
- done
-
- usrpart=""
- echo "You have selected $drivename"
- echo "here is a list of partitions on $drivename"
- disklabel $drivename 2>/dev/null | sed -e '/^[ ][ ][ad-p]:/p;/^#[ \t]*size/p;d'
- echo "which partition would you like to format and have"
- echo -n "mounted as /usr? (supply the letter): "
- getresp
- if [ "X$resp" = "X" ]; then
- continue;
- fi
-
- list=$(getvar $drivename)
- set -- $list
- while [ $# -gt 0 ]; do
- if [ "$resp" = "$1" ]; then
- if [ "`echo $2 | sed -e 's,.*BSD.*,BSD,'`" != "BSD" ]; then
- echo ""
- echo -n "$drivename$resp is of type $2 which is not"
- echo " a BSD filesystem type"
- break
- fi
- usrpart=$drivename$resp
- break
- else
- shift
- shift
- fi
- done
- if [ "X$usrpart" = "X" ]; then
- echo "$resp is not a valid input."
- echo ""
- fi
-done
-
-echo ""
-echo "Initializing /usr filesystem, and mounting..."
-$DONTDOIT newfs /dev/r${usrpart} $name
-$DONTDOIT mkdir -p /mnt/usr
-$DONTDOIT mount -v /dev/${usrpart} /mnt/usr
-echo ""
-echo -n "Adding to fstab..."
-echo "/dev/${usrpart} /usr ufs rw 1 2" >> $FSTAB
-sync
-echo " done."
-
-echo ""
-echo ""
-echo "OK! The preliminary work of setting up your disk is now complete,"
-echo "and you can install the actual NetBSD software."
-echo ""
-echo "Right now, your root is mounted on /mnt and your usr on /mnt/usr."
-echo "You should consult the installation notes to determine how to load"
-echo "and install the NetBSD distribution sets, and how to configure your"
-echo "system when you are done."
-echo ""
-echo "GOOD LUCK!"
-echo ""
+++ /dev/null
-# $NetBSD: list,v 1.1 1995/07/18 04:13:12 briggs Exp $
-
-# the disktab explanation file
-COPY disktab.preinstall etc
-
-# and the installation tools
-COPY dot.profile .profile
-COPY dot.instutils .instutils
-COPY install.sh install
-SPECIAL chmod 755 install
+++ /dev/null
-#
-# $NetBSD: Makefile.inc,v 1.1 1995/07/18 04:13:14 briggs Exp $
-#
-
-# TOP is assumed to be defined by Makefile including this one.
-
-CBIN= raminst
-COMMONDIR= ${TOP}/kc-common
-
-MOUNT_POINT?= ${TOP}/kc/fs
-
-LISTS= ${COMMONDIR}/list ${.CURDIR}/list
-CRUNCHCONF= ${COMMONDIR}/${CBIN}.conf
-MTREE= ${COMMONDIR}/mtree.conf
-
-all: ${CBIN}
- mkdir -p ${MOUNT_POINT}
- mtree -def ${MTREE} -p ${MOUNT_POINT}/ -u
- TOPDIR=${TOP} CURDIR=${.CURDIR} OBJDIR=${.OBJDIR} \
- TARGDIR=${MOUNT_POINT} sh ${TOP}/runlist.sh ${LISTS}
- mkcdfs ${IMAGE} ${MOUNT_POINT}
-
-unconfig:
- -/bin/rm -f ${IMAGE}
- -/bin/rm -rf ${MOUNT_POINT}
-
-${CBIN}.mk ${CBIN}.cache ${CBIN}.c: ${CRUNCHCONF}
- crunchgen -E -D ${BSDSRCDIR} -L ${DESTDIR}/usr/lib ${CRUNCHCONF}
-
-${CBIN}: ${CBIN}.mk ${CBIN}.cache ${CBIN}.c
- make -f ${CBIN}.mk all
-
-clean cleandir:
- /bin/rm -f core ${IMAGE} ${CBIN} ${CBIN}.mk ${CBIN}.cache *.o *.lo *.c
- /bin/rm -rf ${MOUNT_POINT}
-
-.include <bsd.obj.mk>
-.include <bsd.subdir.mk>
+++ /dev/null
-#
-# $NetBSD: list,v 1.2 1995/08/13 13:21:07 briggs Exp $
-#
-
-# copy the crunched binary, link to it, and kill it
-COPY ${OBJDIR}/raminst raminst
-LINK raminst bin/cat
-LINK raminst bin/cp
-LINK raminst bin/pwd
-LINK raminst bin/sh
-LINK bin/sh bin/-sh
-LINK raminst bin/stty
-LINK raminst bin/sync
-LINK raminst bin/test
-LINK raminst bin/[
-LINK raminst sbin/init
-LINK raminst sbin/mount
-LINK raminst sbin/mount_ffs
-LINK raminst sbin/reboot
-LINK raminst sbin/umount
-SPECIAL /bin/rm raminst
-
-# copy the MAKEDEV script and make some devices
-COPY ${DESTDIR}/dev/MAKEDEV dev/MAKEDEV
-SPECIAL cd dev; sh MAKEDEV raminst
-SPECIAL /bin/rm dev/MAKEDEV
-
-# various files that we need in /etc for the install
-
-# and the common installation tools
+++ /dev/null
-#
-# $NetBSD: mtree.conf,v 1.1 1995/07/18 04:13:24 briggs Exp $
-#
-
-/set type=dir uname=root gname=wheel mode=0755
-# .
-.
-
-# ./bin
-bin
-# ./bin
-..
-
-# ./dev
-dev
-# ./dev
-..
-
-# ./etc
-etc
-# ./etc
-..
-
-# ./mnt
-mnt
-# ./mnt
-..
-
-# ./mnt2
-mnt2
-# ./mnt2
-..
-
-# ./sbin
-sbin
-# ./sbin
-..
-
-# ./tmp
-tmp
-# ./tmp
-..
-
-# ./usr
-usr
-
-# ./usr/bin
-bin
-# ./usr/bin
-..
-
-# ./usr/mdec
-mdec
-# ./usr/mdec
-..
-
-# ./usr/sbin
-sbin
-# ./usr/sbin
-..
-
-# ./usr/share
-share
-
-# ./usr/share/misc
-misc
-# ./usr/share/misc
-..
-
-# ./usr/share
-..
-
-# ./usr
-..
+++ /dev/null
-#
-# $NetBSD: raminst.conf,v 1.3 1995/09/30 20:00:47 briggs Exp $
-#
-# ram.conf - unified binary for the RAM disk
-#
-
-srcdirs bin sbin usr.bin usr.sbin
-srcdirs gnu/usr.bin
-
-progs cat cp pwd
-progs sh stty sync test init
-progs mount mount_ffs reboot
-progs umount
-
-ln sh -sh # init invokes the shell this way
-ln test [
-ln mount_ffs ffs
-
-libs -ledit -lutil -ltermcap -lcompat -ll -lm -lz
+++ /dev/null
-#
-# $NetBSD: termcap.vt,v 1.1 1995/07/18 04:13:31 briggs Exp $
-#
-# Copyright (c) 1980, 1985, 1989 The Regents of the University of California.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-# must display the following acknowledgement:
-# This product includes software developed by the University of
-# California, Berkeley and its contributors.
-# 4. Neither the name of the University nor the names of its contributors
-# may be used to endorse or promote products derived from this software
-# without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-# SUCH DAMAGE.
-#
-# @(#)termcap.src 5.109 (Berkeley) 3/8/93
-#
-vt200|vt220|dec-vt220|vt200-js|vt220-js|dec vt200 series with jump scroll:\
- :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:LE=\E[%dD:\
- :RI=\E[%dC:UP=\E[%dA:ae=^O:al=\E[L:as=^N:ct=\E[3g:dc=\E[P:dl=\E[M:\
- :ei=\E[4l:im=\E[4h:k1=\E[17~:k2=\E[18~:k3=\E[19~:k4=\E[20~:\
- :k5=\E[21~:k6=\E[23~:k7=\E[24~:k8=\E[25~:kD=\E[3~:kH=\E[4~:\
- :kI=\E[2~:kN=\E[6~:kP=\E[5~:kb=\177:kh=\E[1~:km:mi:ms:\
- :if=/usr/share/tabset/vt100:se=\E[27m:st=\EH:ue=\E[24m:\
- :tc=vt100:
-vt100|dec-vt100|vt100-am|vt100am|dec vt100:\
- :bl=^G:cr=^M:it#8:\
- :do=^J:co#80:li#24:cl=50\E[;H\E[2J:sf=2*\ED:\
- :le=^H:bs:am:cm=5\E[%i%d;%dH:nd=2\E[C:up=2\E[A:cb=3\E[1K:\
- :ce=3\E[K:cd=50\E[J:so=2\E[7m:se=2\E[m:us=2\E[4m:ue=2\E[m:\
- :md=2\E[1m:mr=2\E[7m:mb=2\E[5m:me=2\E[m:is=\E[1;24r\E[24;1H:\
- :if=/usr/share/tabset/vt100:\
- :rs=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h:ks=\E[?1h\E=:ke=\E[?1l\E>:\
- :ku=\EOA:kd=\EOB:kr=\EOC:kl=\EOD:kb=^H:\
- :ho=\E[H:k1=\EOP:k2=\EOQ:k3=\EOR:k4=\EOS:pt:sr=2*\EM:vt#3:xn:\
- :sc=\E7:rc=\E8:cs=\E[%i%d;%dr:
-vt300|vt320|vt300-80|VT 300 with 80 columns, on VMS:\
- :AL=\E[%dL:DC=\E[%dP:DL=\E[%dM:DO=\E[%dB:IC=\E[%d@:\
- :LE=\E[%dD:RI=\E[%dC:SR=1*\E[%dM:UP=\E[%dA:al=\E[L:\
- :am:bl=^G:bs:cd=2*\E[J:ce=2*\E[K:cl=45\E[H\E[2J:\
- :cm=%i\E[%d;%dH:co#80:cr=\r:cs=\E[%i%d;%dr:ct=\E[3g:\
- :dc=\E[P:dl=\E[M:dm=:do=\ED:ec=\E[%dX:ed=:ei=\E[4l:\
- :ho=\E[H:ic:im=\E[4h:it#8:k1=\EOP:k2=\EOQ:k3=\EOR:\
- :k4=\EOS:kd=\E[B:ke=\E[?1l\E>:kl=\E[D:kn#4:kr=\E[C:ks=\E[?1h\E=:\
- :ku=\E[A:le=^H:li#24:mb=\E[5m:md=\E[1m:me=\E[0m:mi:\
- :mr=\E[7m:ms:nd=\E[C:nl=\ED:nw=\EE:pf=\E[?4i:po=\E[?5i:\
- :ps=\E[i:rc=\E8:sc=\E7:se=\E[27m:sf=1*\ED:so=\E[7m:\
- :sr=1*\EM:st=\EH:ue=\E[24m:up=\EM:us=\E[4m:xn:
+++ /dev/null
-# $NetBSD: Makefile,v 1.1 1995/07/18 04:13:06 briggs Exp $
-
-TOP= ${.CURDIR}/..
-
-.include "${TOP}/Makefile.inc"
-IMAGE= kc-${REV}.fs
-
-.include "${TOP}/kc-common/Makefile.inc"
+++ /dev/null
-#
-# $NetBSD: dot.instutils,v 1.1 1995/07/18 04:13:08 briggs Exp $
-#
-# Copyright (c) 1994 Christopher G. Demetriou
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-# must display the following acknowledgement:
-# This product includes software developed by Christopher G. Demetriou.
-# 4. The name of the author may not be used to endorse or promote products
-# derived from this software without specific prior written permission
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-# Installation configuration utilites (functions), to get NetBSD configured
-# reasonably once it is installed on the hard disk. These are meant to be
-# invoked from the shell prompt, by people installing NetBSD.
-
-Configure()
-{
- DEV=/mnt/dev
- ETC=/mnt/etc
-
- echo "You will now be prompted for information about this"
- echo "machine. If you hit return, the default answer (in"
- echo "brackets) will be used."
-
- echo ""
- echo -n "What is this machine's hostname? [unknown.host.domain] "
- read hname
- if [ "$hname" = "" ]; then
- hname=unknown.host.domain
- fi
- echo $hname > ${ETC}/myname
- proto_domain=`echo $hname | sed -e 's/[^.]*\.//'`
-
- echo ""
- echo "What domain is this machine in (this is NOT its YP"
- echo -n "domain name)? [$proto_domain] "
- read dname
- if [ "$dname" = "" ]; then
- dname=$proto_domain
- fi
-
- echo "\a"
- if [ -e ${ETC}/sendmail.cf ]; then
- echo "WARNING: A default sendmail.cf exists, and probably"
- echo "needs to be tuned and/or replaced, to work properly at"
- echo "your site!"
- else
- echo "WARNING: No default sendmail.cf installed. Did you"
- echo "forget to install the 'etc' distribution?"
- fi
-
- echo "127.0.0.1 localhost localhost.$dname" > ${ETC}/hosts
-
- echo ""
- echo -n "Does this machine have an ethernet interface? [y] "
- read resp
- case "$resp" in
- n*)
- ;;
- *)
- intf=
- while [ "$intf" = "" ]; do
- echo -n "What is the primary interface name "
- echo -n "(e.g. ae0, etc)? "
- read intf
- done
- echo -n "What is the hostname for this interface? [$hname] "
- read ifname
- if [ "$ifname" = "" ]; then
- ifname=$hname
- fi
- ifaddr=
- while [ "$ifaddr" = "" ]; do
- echo -n "What is the IP address associated with "
- echo -n "interface ${intf}? "
- read ifaddr
- done
- echo "$ifaddr $ifname `echo $ifname | sed -e s/\.$dname//`" \
- >> ${ETC}/hosts
-
- echo -n "Does this interface have a special netmask? [n] "
- read resp
- case "$resp" in
- y*)
- echo -n "What is the netmask? [0xffffff00] "
- read ifnetmask
- if [ "$ifnetmask" = "" ]; then
- ifnetmask=0xffffff00
- fi
- ;;
- *)
- ifnetmask=
- ;;
- esac
-
- echo -n "Does this interface need additional flags? [n] "
- read resp
- case "$resp" in
- y*)
- echo -n "What flags? [link0] "
- read ifflags
- if [ "$ifflags" = "" ]; then
- ifflags=link0
- fi
- ;;
- *)
- ifflags=
- ;;
- esac
- echo "inet $ifname $ifnetmask $ifflags" > ${ETC}/hostname.$intf
-
- echo "\a"
- echo -n "WARNING: if you have any more ethernet interfaces, "
- echo "you will have to configure"
- echo -n "them by hand. Read the comments in /etc/netstart to"
- echo "learn how to do this."
- ;;
- esac
-
- echo ""
- echo -n "Making device nodes..."
- cd ${DEV}
- sh MAKEDEV all
- echo " done."
-
- sync
-
- echo "You may now reboot your machine with the shutdown command."
- echo " shutdown -r now"
- echo "to reboot or"
- echo " shutdown -h now"
- echo "to halt."
- echo "Remember to erase the miniroot name from the booter's"
- echo "booting preferences dialog box before booting again."
-}
+++ /dev/null
-#
-# $NetBSD: dot.profile,v 1.1 1995/07/18 04:13:09 briggs Exp $
-#
-# Copyright (c) 1994 Christopher G. Demetriou
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-# must display the following acknowledgement:
-# This product includes software developed by Christopher G. Demetriou.
-# 4. The name of the author may not be used to endorse or promote products
-# derived from this software without specific prior written permission
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-PATH=/sbin:/bin:/usr/bin:/usr/sbin:/
-export PATH
-TERM=vt200
-export TERM
-
-# set up some sane defaults
-echo 'erase ^?, werase ^H, kill ^U, intr ^C'
-stty newcrt werase ^H intr ^C kill ^U erase ^? 9600
-echo ''
-
-# pull in the function definitions that people will use from the shell prompt.
-. /.commonutils
-. /.instutils
-
-# run the installation script.
-umask 022
-install
+++ /dev/null
-#!/bin/sh
-#
-# $NetBSD: install.sh,v 1.1 1995/07/18 04:13:10 briggs Exp $
-#
-# Copyright (c) 1994 Christopher G. Demetriou
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in the
-# documentation and/or other materials provided with the distribution.
-# 3. All advertising materials mentioning features or use of this software
-# must display the following acknowledgement:
-# This product includes software developed by Christopher G. Demetriou.
-# 4. The name of the author may not be used to endorse or promote products
-# derived from this software without specific prior written permission
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-# NetBSD installation script.
-# In a perfect world, this would be a nice C program, with a reasonable
-# user interface.
-
-FSTABDIR=/mnt/etc # /mnt/etc
-#DONTDOIT=echo
-
-VERSION=1.0
-FSTAB=${FSTABDIR}/fstab
-
-getresp() {
- read resp
- if [ "X$resp" = "X" ]; then
- resp=$1
- fi
-}
-
-getvar() {
- echo $(eval $(echo "echo \$$1"))
-}
-
-shiftvar() {
- local - var
- var="$1"
- list="$(getvar $var)"
- set -- $list
- shift
- setvar $var "$*"
-}
-
-getparts() {
- disklabel $1 2>/dev/null | sed -e '/^[ ][ ][ad-p]/!d' |
- sed -e 's,^[ ]*\([a-p]\):[ ]*[0-9]*[ ]*[0-9]*[ ][ ]*\([a-zA-Z0-9.]*\).*,\1 \2,' |
- sed -e ':a
- N;${s/\n/ /g;p;d;}
- ba'
-}
-
-getdrives() {
- local du thispart
- for du in /dev/r${drivetype}?a; do
- dd if=$du of=/dev/null bs=1b count=1 >/dev/null 2>&1
- if [ $? -eq 0 ]; then
- thisunit=`echo $du | sed -e 's,/dev/r\(...\)a,\1,g'`
- driveunits="$driveunits $thisunit"
- else
- continue;
- fi
- setvar $thisunit "$(getparts $thisunit)"
- export $thisunit
- done
- export drivenunits
-}
-
-prepdrive() {
- echo "which drive would you like to prepare next?"
- echo "choices are: ${driveunits}"
- echo ""
- getresp
- case $resp in
- *) ;;
- esac
-}
-
-echo "Welcome to the NetBSD ${VERSION} installation program."
-echo ""
-echo "This program is designed to help you put NetBSD on your hard disk,"
-echo "in a simple and rational way. Its main objective is to format,"
-echo "mount and create an fstab for your root (/) and user (/usr)"
-echo "partitions."
-echo ""
-echo "As with anything which modifies your hard drive's contents, this"
-echo "program can cause SIGNIFICANT data loss, and you are advised"
-echo "to make sure your hard drive is backed up before beginning the"
-echo "installation process."
-echo ""
-echo "Default answers are displyed in brackets after the questions."
-echo "You can hit Control-C at any time to quit, but if you do so at a"
-echo "prompt, you may have to hit return. Also, quitting in the middle of"
-echo "installation may leave your system in an inconsistent state."
-echo ""
-echo -n "Proceed with installation? [n] "
-getresp "n"
-case "$resp" in
- y*|Y*)
- echo "scanning for the root device"
- ;;
- *)
- echo ""
- echo "OK, then. Enter 'halt' at the prompt to halt the"
- echo "machine or 'reboot' to reboot it."
- exit
- ;;
-esac
-
-drivetype=sd
-sect_fwd=""
-
-# find out what units are possible for that disk, and query the user.
-getdrives
-for du in $driveunits; do
- set -- $(getvar $du)
- if [ $# -ge 2 -a "$1" = "a" -a "`echo $2 | sed -e 's,.*BSD.*,BSD,'`" = "BSD" ]; then
- rdev=$du
- fi
-done
-
-echo ""
-echo "The root device you have chosen is on: ${rdev}"
-echo ""
-# driveunits=`ls /dev/${drivetype}?a | sed -e 's,/dev/\(...\)a,\1,g'`
-if [ "X${driveunits}" = "X" ]; then
- echo "FATAL ERROR:"
- echo "No devices for disks of type '${drivetype}'."
- echo "This is probably a bug in the install disks."
- echo "Exiting install program."
- exit
-fi
-
-echo ""
-echo "THIS IS YOUR LAST CHANCE!!!"
-echo ""
-echo "(answering yes will format your root partition on $rdev)"
-echo -n "Are you SURE you want NetBSD installed on your hard drive? (yes/no) "
-answer=""
-while [ "$answer" = "" ]; do
- getresp
- case $resp in
- yes|YES)
- echo ""
- answer=yes
- ;;
- no|NO)
- echo ""
- echo -n "OK, then. enter 'halt' to halt the machine. "
- exit
- ;;
- *)
- echo -n "Please answer 'yes' or 'no'."
- ;;
- esac
-done
-echo "Initializing / (root) filesystem, and mounting..."
-$DONTDOIT newfs /dev/r${rdev}a $name
-$DONTDOIT mount -v /dev/${rdev}a /mnt
-echo ""
-echo -n "Creating a fstab..."
-mkdir -p $FSTABDIR
-echo "/dev/${rdev}a / ufs rw 1 1" > $FSTAB
-
-# get rid of this partition
-shiftvar $rdev
-shiftvar $rdev
-
-echo ""
-echo "Now lets setup your /usr file system"
-echo "(Once a valid input for drive and partition is seen"
-echo "it will be FORMATTED and inserted in the fstab.)"
-while [ "X$usrpart" = "X" ]; do
- resp=""
- drivename=""
- while [ "X$resp" = "X" ]; do
- echo "choices: $driveunits"
- echo "which drive do you want /usr on?"
- getresp
- set -- $driveunits
- while [ $# -gt 0 ]; do
- if [ "X$resp" = "X$1" ]; then
- drivename=$1
- break;
- else
- shift
- fi
- done
- if [ "X$drivename" != "X" ]; then
- break
- fi
- done
-
- usrpart=""
- echo "You have selected $drivename"
- echo "here is a list of partitions on $drivename"
- disklabel $drivename 2>/dev/null | sed -e '/^[ ][ ][ad-p]:/p;/^#[ \t]*size/p;d'
- echo "which partition would you like to format and have"
- echo -n "mounted as /usr? (supply the letter): "
- getresp
- if [ "X$resp" = "X" ]; then
- continue;
- fi
-
- list=$(getvar $drivename)
- set -- $list
- while [ $# -gt 0 ]; do
- if [ "$resp" = "$1" ]; then
- if [ "`echo $2 | sed -e 's,.*BSD.*,BSD,'`" != "BSD" ]; then
- echo ""
- echo -n "$drivename$resp is of type $2 which is not"
- echo " a BSD filesystem type"
- break
- fi
- usrpart=$drivename$resp
- break
- else
- shift
- shift
- fi
- done
- if [ "X$usrpart" = "X" ]; then
- echo "$resp is not a valid input."
- echo ""
- fi
-done
-
-echo ""
-echo "Initializing /usr filesystem, and mounting..."
-$DONTDOIT newfs /dev/r${usrpart} $name
-$DONTDOIT mkdir -p /mnt/usr
-$DONTDOIT mount -v /dev/${usrpart} /mnt/usr
-echo ""
-echo -n "Adding to fstab..."
-echo "/dev/${usrpart} /usr ufs rw 1 2" >> $FSTAB
-sync
-echo " done."
-
-echo ""
-echo ""
-echo "OK! The preliminary work of setting up your disk is now complete,"
-echo "and you can install the actual NetBSD software."
-echo ""
-echo "Right now, your root is mounted on /mnt and your usr on /mnt/usr."
-echo "You should consult the installation notes to determine how to load"
-echo "and install the NetBSD distribution sets, and how to configure your"
-echo "system when you are done."
-echo ""
-echo "GOOD LUCK!"
-echo ""
+++ /dev/null
-# $NetBSD: list,v 1.1 1995/07/18 04:13:12 briggs Exp $
-
-# the disktab explanation file
-COPY disktab.preinstall etc
-
-# and the installation tools
-COPY dot.profile .profile
-COPY dot.instutils .instutils
-COPY install.sh install
-SPECIAL chmod 755 install
${HOSTCC} -o elfrdsetroot ${TOP}/elfrdsetroot.c
setroot: ${IMAGE} bsd elfrdsetroot
- elfrdsetroot bsd < ${IMAGE}
+ ${.OBJDIR}/elfrdsetroot bsd < ${IMAGE}
bsd: ${KERNEL}
cp ${KERNEL} bsd
projects / openbsd / commitdiff