-# $NetBSD: DISKLESS,v 1.10 1995/10/08 23:38:41 gwr Exp $
+# $NetBSD: DISKLESS,v 1.10.2.1 1995/11/18 07:15:46 gwr Exp $
#
# DISKLESS Sun3 (3/50, 3/60, 3/110, 3/160, 3/260)
options SWAPPAGER, VNODEPAGER, DEVPAGER # paging
options KTRACE # system call tracing support
#makeoptions DEBUG="-g" # symbols for kgdb + nm
+#options DDB
# Filesystem options
-#options NFSSERVER # nfs server support
options NFSCLIENT # nfs client support
#
options FDESC # /dev/fd/*
options NFS_BOOT_RWSIZE=1024
# Compatability options
-options COMPAT_SUNOS # can run SunOS 4.1.1 executables
+options COMPAT_SUNOS # can run SunOS 4.1.1 executables
#options COMPAT_09 # NetBSD 0.9,
-options COMPAT_10 # NetBSD 1.0,
-options COMPAT_43 # and 4.3BSD
-options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD
+options COMPAT_10 # NetBSD 1.0,
+options COMPAT_43 # and 4.3BSD
+options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD
# Sun3-specific debugging options
#options CONTEXT_DEBUG
#options SYSCALL_DEBUG
#options EXEC_DEBUG
#options DIAGNOSTIC
-#options SCSIDEBUG
config netbsd root on nfs swap on nfs
-# Devices
-
-bwtwo0 at obmem0 addr ?
-cgtwo0 at vmes0 addr 0xff400000 level 4 vect 0xA8
-cgfour0 at obmem0 addr ?
+#
+# Network devices
+#
+# Intel Ethernet (onboard, or VME)
ie0 at obio0 addr ? level ?
ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75
+# Lance Ethernet (only onboard)
le0 at obio0 addr ? level ?
+#
+# Frame buffer devices
+#
+
+# The default cgfour address depends on the machine:
+# 3/60: obio 0xFF200000 .. 0xFF9fffff
+# 3/110: different? (not tested)
+cgfour0 at obmem0 addr ?
+
+# 3/60 P4 accelerated 8-bit color frame buffer
+# cgsix0 at obmem0 addr ?
+
+# 3/60 P4 24-bit color frame buffer
+# cgeight0 at obmem0 addr ?
+
+# The default bwtwo address depends on the machine:
+# 3/50: obio 0x100000
+# else: obio 0xff000000
+bwtwo0 at obmem0 addr ?
+# 3/60 P4 color frame buffer overlay plane, or P4 monochrome frame buffer
+#bwtwo1 at obmem0 addr 0xff300000
+# 3/60 plug-in color frame buffer overlay plane
+#bwtwo1 at obmem0 addr 0xff400000
+
+# Sun-3 color board, or CG5 8-bit VME frame buffer.
+cgtwo0 at vmes0 addr 0xff400000 level 4 vect 0xA8
+
+# Support for the CG9 24-bit VME frame buffer.
+# cgnine0 at vmel0 addr 0x08000000
+
+# Misc.
pseudo-device loop 1 # network loopback
-#pseudo-device bpfilter 4 # packet filter
+#pseudo-device bpfilter 8 # packet filter
#pseudo-device sl 2 # CSLIP
#pseudo-device ppp 2 # PPP
#pseudo-device tun 2 # network tunneling over tty
-# $NetBSD: GENERIC,v 1.24 1995/10/08 23:38:43 gwr Exp $
+# $NetBSD: GENERIC,v 1.24.2.1 1995/11/18 07:15:57 gwr Exp $
#
# GENERIC Sun3 (3/50, 3/60, 3/110, 3/160, 3/260)
options SWAPPAGER, VNODEPAGER, DEVPAGER # paging
options KTRACE # system call tracing support
#makeoptions DEBUG="-g" # symbols for kgdb + nm
-options DDB
+options DDB
# Filesystem options
options NFSSERVER # nfs server support
# Networking options
options INET # IP prototol stack support
-# XXX - Work-around for slow SunOS/Sun3 servers (sigh...)
+# XXX - Work-around for root on slow SunOS/Sun3 servers (sigh...)
options NFS_BOOT_RWSIZE=1024
# Compatability options
options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD
# Sun3-specific debugging options
-options CONTEXT_DEBUG
-options PMAP_DEBUG
+#options CONTEXT_DEBUG
+#options PMAP_DEBUG
#options VMFAULT_TRACE
#options SYSCALL_DEBUG
-options EXEC_DEBUG
+#options EXEC_DEBUG
options DIAGNOSTIC
options SCSIDEBUG
config netbsd swap generic
-# Devices
-
-bwtwo0 at obmem0 addr ?
-cgtwo0 at vmes0 addr 0xff400000 level 4 vect 0xA8
-cgfour0 at obmem0 addr ?
+#
+# Network devices
+#
+# Intel Ethernet (onboard, or VME)
ie0 at obio0 addr ? level ?
ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75
+# Lance Ethernet (only onboard)
le0 at obio0 addr ? level ?
-si0 at obio0 addr ? level ?
-si0 at vmes0 addr 0xff200000 level 2 vect 0x40
-si1 at vmes0 addr 0xff204000 level 2 vect 0x41
+#
+# Disk and tape devices
+#
+
+# Sun3 "si" SCSI controller (NCR 5380)
+ncr_si0 at obio0 addr ? level ?
+ncr_si0 at vmes0 addr 0xff200000 level 2 vect 0x40
+ncr_si1 at vmes0 addr 0xff204000 level 2 vect 0x41
+
+# Xylogics 7053 controllers
+# xdc0 at vmel0 addr 0xffffee80 level 2 vect 0x44
+# xdc1 at vmel0 addr 0xffffee90 level 2 vect 0x45
+# xd* at xdc? drive ?
+
+# Xylogics 450/451 controllers
+# xyc0 at vmes0 addr 0xffffee40 level 2 vect 0x48
+# xyc1 at vmes0 addr 0xffffee48 level 2 vect 0x49
+# xy* at xyc? drive ?
+# Xylogics 472 tape controllers?
+
+#
+# Frame buffer devices
+#
+
+# The default cgfour address depends on the machine:
+# 3/60: obio 0xFF200000 .. 0xFF9fffff
+# 3/110: different? (not tested)
+cgfour0 at obmem0 addr ?
+
+# 3/60 P4 accelerated 8-bit color frame buffer
+# cgsix0 at obmem0 addr ?
+
+# 3/60 P4 24-bit color frame buffer
+# cgeight0 at obmem0 addr ?
+
+# The default bwtwo address depends on the machine:
+# 3/50: obio 0x100000
+# else: obio 0xff000000
+bwtwo0 at obmem0 addr ?
+# 3/60 P4 color frame buffer overlay plane, or P4 monochrome frame buffer
+#bwtwo1 at obmem0 addr 0xff300000
+# 3/60 plug-in color frame buffer overlay plane
+#bwtwo1 at obmem0 addr 0xff400000
+
+# Sun-3 color board, or CG5 8-bit VME frame buffer.
+cgtwo0 at vmes0 addr 0xff400000 level 4 vect 0xA8
+
+# Support for the CG9 24-bit VME frame buffer.
+# cgnine0 at vmel0 addr 0x08000000
+
+#
+# SCSI infrastructure
+#
scsibus* at scsi?
# Sun compatible scsi device mappings
#ch* at scsibus? target ? lun ?
+
+# RAM-disk drivers
rd0 at mainbus?
rd1 at mainbus?
+# Misc.
pseudo-device loop 1 # network loopback
pseudo-device bpfilter 8 # packet filter
pseudo-device sl 2 # CSLIP
-# $NetBSD: Makefile.sun3,v 1.34 1995/09/19 23:54:29 thorpej Exp $
+# $NetBSD: Makefile.sun3,v 1.34.2.1 1995/11/18 07:16:06 gwr Exp $
#
# Makefile for NetBSD
# This makefile is constructed from a machine description:
# config machineid
# Most changes should be made in the machine description
-# /sys/conf/``machineid''
+# /sys/arch/sun3/conf/``machineid''
# after which you should do
# config machineid
# Machine generic makefile changes should be made in
-# /sys/conf/Makefile.``machinetype''
+# /sys/arch/sun3/conf/Makefile.sun3
# after which config should be rerun for all machines of that type.
#
# N.B.: NO DEPENDENCIES ON FOLLOWING FLAGS ARE VISIBLE TO MAKEFILE
lint: /tmp param.c
@lint -hbxn -DGENERIC -Dvolatile= ${COPTS} ${PARAM} -UKGDB \
${SUN3}/sun3/Locore.c ${CFILES} ${SUN3}/sun3/swapgeneric.c \
- ioconf.c param.c| \
+ ioconf.c param.c | \
grep -v 'struct/union .* never defined' | \
grep -v 'possible pointer alignment problem'
${SUN3}/include/trap.h $S/arch/m68k/include/trap.h
${CPP} -DLOCORE ${COPTS} ${SUN3}/sun3/locore.s | ${AS} -o locore.o
-# the following is necessary because autoconf.o depends on #if GENERIC
-autoconf.o: Makefile
+# depends on root or device configuration
+autoconf.o conf.o : Makefile
-# depends on device configuration
-conf.o : Makefile
+# depends on the supported CPU types
+locore.o sun3_startup.o pmap.o trap.o : Makefile
# depends on network or filesystem configuration
-uipc_proto.o vfs_conf.o : Makefile
-
-# depends on value of SYMTAB_SPACE
-db_aout.o : Makefile
-
-sun3_startup.o pmap.o kern_xxx.o: Makefile
+uipc_proto.o vfs_conf.o kern_xxx.o : Makefile
# depend on maxusers
assym.s: Makefile
-# $NetBSD: RAMDISK,v 1.1 1995/10/08 23:38:44 gwr Exp $
+# $NetBSD: RAMDISK,v 1.1.2.1 1995/11/18 07:16:14 gwr Exp $
#
# RAMDISK: Root/swap on ramdisk
# Machines to be supported by this kernel
options HAVECACHE # Sun3/260 VAC
-# Enable the hooks used for initializing the ram-disk.
-options RAMDISK_HOOKS
-options MINIROOTSIZE=512 # 256K
-
# Needs to be set per system. i.e change these as you see fit
maxusers 2
# Standard system options
options SWAPPAGER, VNODEPAGER, DEVPAGER # paging
+#makeoptions DEBUG="-g" # symbols for kgdb + nm
+#options DDB
+
+# Enable the hooks used for initializing the ram-disk.
+options RAMDISK_HOOKS
+options MINIROOTSIZE=512 # 256K
# Filesystem options
# May need NFSCLIENT to get miniroot image
# Networking options
options INET # IP prototol stack support
-# XXX - Work-around for slow SunOS/Sun3 servers (sigh...)
-options NFS_BOOT_RWSIZE=1024
# Compatability options (XXX - Need these?)
#options COMPAT_SUNOS # can run SunOS 4.1.1 executables
options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD
# Sun3-specific debugging options
-# options DDB
options DIAGNOSTIC
# The config program assumes all devices have partions...
# Is it OK to put swap on a non-existent partition?
config netbsd root on rd0a swap on rd0b
-# Devices
-
-# RAM Disk (root for install tape)
-rd0 at mainbus?
-
-# No frame-buffer devices.
+#
+# Network devices
+#
+# Intel Ethernet (onboard, or VME)
ie0 at obio0 addr ? level ?
ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75
+# Lance Ethernet (only onboard)
le0 at obio0 addr ? level ?
-si0 at obio0 addr ? level ?
-si0 at vmes0 addr 0xff200000 level 2 vect 0x40
+#
+# Disk and tape devices
+#
+
+# Sun3 "si" SCSI controller (NCR 5380)
+ncr_si0 at obio0 addr ? level ?
+ncr_si0 at vmes0 addr 0xff200000 level 2 vect 0x40
+ncr_si1 at vmes0 addr 0xff204000 level 2 vect 0x41
+
+# Xylogics 7053 controllers
+# xdc0 at vmel0 addr 0xffffee80 level 2 vect 0x44
+# xdc1 at vmel0 addr 0xffffee90 level 2 vect 0x45
+# xd* at xdc? drive ?
+
+# Xylogics 450/451 controllers
+# xyc0 at vmes0 addr 0xffffee40 level 2 vect 0x48
+# xyc1 at vmes0 addr 0xffffee48 level 2 vect 0x49
+# xy* at xyc? drive ?
+
+# Xylogics 472 tape controllers?
+
+#
+# Frame buffer devices
+# (Not needed for the RAMDISK installation kernel)
+#
+# SCSI infrastructure
+#
scsibus* at scsi?
# Sun compatible scsi device mappings
#ch* at scsibus? target ? lun ?
+
+# RAM Disk (root for install tape)
+rd0 at mainbus?
+
+# Misc.
pseudo-device loop 1 # network loopback
+pseudo-device sl 2 # CSLIP
+pseudo-device ppp 2 # PPP
projects / openbsd / commitdiff