-# $OpenBSD: files.alpha,v 1.106 2018/01/25 15:06:29 mpi Exp $
+# $OpenBSD: files.alpha,v 1.107 2018/02/14 23:51:49 jsg Exp $
# $NetBSD: files.alpha,v 1.32 1996/11/25 04:03:21 cgd Exp $
#
# alpha-specific configuration info
# XXX
file arch/alpha/alpha/cpuconf.c
file arch/alpha/alpha/dec_2100_a50.c dec_2100_a50
-file arch/alpha/alpha/dec_21000.c dec_21000
file arch/alpha/alpha/dec_3000_300.c dec_3000_300
file arch/alpha/alpha/dec_3000_500.c dec_3000_500
file arch/alpha/alpha/dec_axppci_33.c dec_axppci_33
-# $OpenBSD: files.omap,v 1.21 2017/08/14 21:46:02 ians Exp $
+# $OpenBSD: files.omap,v 1.22 2018/02/14 23:51:49 jsg Exp $
define omap {}
device omap: omap
attach omusbtll at omap
file arch/armv7/omap/omusbtll.c omusbtll
-device omkbd: wskbddev
-attach omkbd at omap
-file arch/armv7/omap/omkbd.c omkbd
-
# LCD frame buffer
device omdisplay: wsemuldisplaydev, rasops16
attach omdisplay at omap
attach amdisplay at fdt
file arch/armv7/omap/amdisplay.c amdisplay
-# MCSPI - spi
-device mcspi
-attach mcspi at omap
-file arch/armv7/omap/mcspi.c mcspi
-
-# pseudo-Audio Device Driver
-device oaudio: audio
-attach oaudio at omap # configure after Atlas Driver
-file arch/armv7/omap/beagle_audio.c oaudio
-
# TDA19988 HDMI PHY
device nxphdmi
attach nxphdmi at i2c
-# $OpenBSD: files.sunxi,v 1.19 2017/05/05 20:13:54 kettenis Exp $
+# $OpenBSD: files.sunxi,v 1.20 2018/02/14 23:51:49 jsg Exp $
device sxiintc
attach sxiintc at fdt
attach sxiahci at fdt
file arch/armv7/sunxi/sxiahci.c sxiahci
-#attach ohci at sunxi with sxiohci
-#file arch/armv7/sunxi/sxiohci.c sxiohci
-
device sxie: ether, ifnet, mii, ifmedia
attach sxie at fdt
file arch/armv7/sunxi/sxie.c sxie
-# $OpenBSD: GENERIC,v 1.174 2017/08/28 19:32:53 jasper Exp $
+# $OpenBSD: GENERIC,v 1.175 2018/02/14 23:51:49 jsg Exp $
#
# For further information on compiling OpenBSD kernels, see the config(8)
# man page.
sti1 at uturn? irq 12
sti* at pci? # EG-PCI, FX*
-#medusa* at mainbus? irq 4 # FDDI
-#venus* at mainbus? irq 5 # ATM J2498A/J3420A
-
# internal i/o space
gsc0 at asp? # Snakes, old 715, old 725, 735/755
gsc0 at lasi0 # 712,715/100,725/64,725/100,[ABCJ]*
#ie* at isa? port 0x360 iomem 0xd0000 irq 7
#ie* at isa? port 0x300 irq 10
#ie* at pci?
-#tms* at gsc? irq 10 # TMS380C26 Network Controller
#siop* at gsc? irq 3 # NCR 53C720 (Fast-Wide HVD)
osiop* at gsc? irq 9 # NCR 53C710 (Narrow SE)
#osiop* at eisa?
-# $OpenBSD: files.hppa,v 1.97 2017/06/05 18:59:07 deraadt Exp $
+# $OpenBSD: files.hppa,v 1.98 2018/02/14 23:51:49 jsg Exp $
#
# hppa-specific configuration info
file arch/hppa/dev/elroy.c elroy
file arch/hppa/dev/apic.c elroy
-# EPIC, Excalibur PCI Interface Chip. Integrated IOA
-# SAGA is a 64-bit data path EPIC
-#device epic: pcibus
-#attach epic at gedoens
-#file arch/hppa/dev/epic.c epic
-
attach sti at gedoens with sti_gedoens
file arch/hppa/dev/sti_sgc.c sti_gedoens
file arch/hppa/dev/sti_pci_machdep.c sti_pci
attach harmony at gsc
file arch/hppa/gsc/harmony.c harmony
-# HPA4011A/B w/ TMS380C26PQL, TMS38054FNL
-#device tms: tokenring
-#attach tms at gsc
-#file arch/hppa/gsc/if_tms.c tms
-
-# these we don't know yet
-# AMD Supernet2 FDDI ?
-#device medusa: fddi
-#attach medusa at gsc
-#file arch/hppa/gsc/medusa.c medusa
-
-# XXX should not be here
-# ANSI/VITA 26-1998 Gbit packet switching network iface
-#device myri: ether
-#attach myri at pci
-#file dev/pci/myri.c myri
-
# PS/2 input ports
device gsckbc: pckbcslot
attach gsckbc at gsc
-# $OpenBSD: files.landisk,v 1.13 2017/06/08 05:35:23 deraadt Exp $
+# $OpenBSD: files.landisk,v 1.14 2018/02/14 23:51:49 jsg Exp $
# $NetBSD: files.landisk,v 1.2 2006/09/07 01:55:02 uwe Exp $
# maxpartitions must be first item in files.${MACHINE}
device power
attach power at obio
file arch/landisk/dev/power.c power needs-flag
-
-#device led
-#attach led at obio
-#file arch/landisk/dev/led_obio.c led needs-flag
-# $OpenBSD: GENERIC,v 1.263 2017/11/27 09:03:37 mpi Exp $g
+# $OpenBSD: GENERIC,v 1.264 2018/02/14 23:51:49 jsg Exp $g
#
# For further information on compiling OpenBSD kernels, see the config(8)
# man page.
mc* at macobio? # MACE ethernet
#esp* at macobio? flags 0x0000ffff # 53c9x SCSI
mesh* at macobio? flags 0xffff # MESH SCSI
-#nvram* at macobio? # nvram
adb* at macobio? # Apple Desktop Bus
apm0 at adb? # APM emulation
piic0 at adb? # PMU I2C
-# $OpenBSD: files.macppc,v 1.89 2017/10/11 17:25:23 deraadt Exp $
+# $OpenBSD: files.macppc,v 1.90 2018/02/14 23:51:49 jsg Exp $
#
# macppc-specific configuration info
# mac peripheral pieces.
#
-#file arch/macppc/pci/bandit.c pci
-
# HT bridge
device hpb {} : pcibus
attach hpb at pci
attach daca at macobio
file arch/macppc/dev/daca.c daca
-#device nvram
-#attach nvram at macobio
-#file arch/macppc/dev/nvram.c nvram needs-flag
-
device macgpio {}
attach macgpio at macobio with macgpio
attach macgpio at macgpio with macgpio_gpio
-# $OpenBSD: GENERIC-IP22,v 1.17 2015/11/02 20:14:35 miod Exp $
+# $OpenBSD: GENERIC-IP22,v 1.18 2018/02/14 23:51:49 jsg Exp $
#
# THIS KERNEL IS FOR INDIGO (IP20), INDY (IP22) AND INDIGO2 (IP24) SYSTEMS ONLY.
#
dsclock0 at hpc0 # IP22/24
sq* at hpc? # On-board Ethernet or E++ adapter
wdsc* at hpc? # On-board SCSI or GIO32 SCSI adapter
-#haltwo* at hpc0 # Indy/Indigo2 Audio
panel* at hpc0 # Indy front panel buttons
pckbc* at hpc0 # Indy/Indigo2 keyboard and mouse
#lxtphy* at mii? # Level1 LXT970 PHYs
#ukphy* at mii? # "unknown" PHYs
-#audio* at haltwo?
-
scsibus* at scsi?
sd* at scsibus?
st* at scsibus?
-# $OpenBSD: GENERIC-IP26,v 1.3 2015/11/02 20:14:36 miod Exp $
+# $OpenBSD: GENERIC-IP26,v 1.4 2018/02/14 23:51:49 jsg Exp $
#
# THIS KERNEL IS FOR POWER INDIGO2 R8000 (IP26) SYSTEMS ONLY.
#
dsclock0 at hpc0
sq* at hpc? # On-board Ethernet
wdsc* at hpc? # On-board SCSI
-#haltwo* at hpc0 # Audio
panel* at hpc0 # front panel buttons
pckbc* at hpc0 # keyboard and mouse
#lxtphy* at mii? # Level1 LXT970 PHYs
#ukphy* at mii? # "unknown" PHYs
-#audio* at haltwo?
-
scsibus* at scsi?
sd* at scsibus?
st* at scsibus?
-# $OpenBSD: GENERIC-IP28,v 1.5 2015/11/02 20:14:36 miod Exp $
+# $OpenBSD: GENERIC-IP28,v 1.6 2018/02/14 23:51:49 jsg Exp $
#
# THIS KERNEL IS FOR POWER INDIGO2 R10000 (IP28) SYSTEMS ONLY.
#
dsclock0 at hpc0
sq* at hpc? # On-board Ethernet
wdsc* at hpc? # On-board SCSI
-#haltwo* at hpc0 # Audio
panel* at hpc0 # front panel buttons
pckbc* at hpc0 # keyboard and mouse
#lxtphy* at mii? # Level1 LXT970 PHYs
#ukphy* at mii? # "unknown" PHYs
-#audio* at haltwo?
-
scsibus* at scsi?
sd* at scsibus?
st* at scsibus?
-# $OpenBSD: files.hpc,v 1.6 2015/05/11 06:46:21 ratchov Exp $
+# $OpenBSD: files.hpc,v 1.7 2018/02/14 23:51:49 jsg Exp $
# $NetBSD: files.hpc,v 1.14 2009/05/14 01:10:19 macallan Exp $
# IP20 RTC
attach wdsc at hpc
file arch/sgi/hpc/wdsc.c wdsc
-device haltwo: audio
-attach haltwo at hpc
-file arch/sgi/hpc/haltwo.c haltwo
-
device zs {[channel = -1]}
attach zs at hpc with zs_hpc
file arch/sgi/hpc/zs.c zs needs-flag
attach pckbc at hpc with pckbc_hpc
file arch/sgi/hpc/pckbc_hpc.c pckbc_hpc
-#device pione
-#attach pione at hpc
-#file arch/sgi/hpc/pione.c pione
-
device panel
attach panel at hpc
file arch/sgi/hpc/panel.c panel
-# $OpenBSD: files.sparc64,v 1.149 2017/10/17 14:25:35 visa Exp $
+# $OpenBSD: files.sparc64,v 1.150 2018/02/14 23:51:49 jsg Exp $
# $NetBSD: files.sparc64,v 1.50 2001/08/10 20:53:50 eeh Exp $
# maxpartitions must be first item in files.${ARCH}
file arch/sparc64/sparc64/in4_cksum.c
file arch/sparc64/sparc64/intr.c
file arch/sparc64/sparc64/ipifuncs.c multiprocessor
-file arch/sparc64/sparc64/kgdb_machdep.c kgdb
# sparc64/sparc64/locore.s is handled specially in the makefile,
# because it must come first in the "ld" command line.
file arch/sparc64/sparc64/machdep.c
-# $OpenBSD: files,v 1.659 2018/02/14 08:55:35 mpi Exp $
+# $OpenBSD: files,v 1.660 2018/02/14 23:51:49 jsg Exp $
# $NetBSD: files,v 1.87 1996/05/19 17:17:50 jonathan Exp $
# @(#)files.newconf 7.5 (Berkeley) 5/10/93
# "Chipset" attributes. These are the machine-independent portions
# of device drivers.
define ncr5380sbc # NCR 5380 SCSI Bus Controller
-define ncr53c7xx # NCR 53c7xx SCSI Bus Controller
define dp8390nic # 8390-family Ethernet controllers
define rtl80x9 # Realtek 8019/8029 NE2000-compatible
define dl10019 # DL10019/10022-family Ethernet controllers
file dev/firmload.c firmload
file dev/flash.c flash needs-flag
file dev/ic/ncr5380sbc.c ncr5380sbc
-file dev/ic/ncr53c7xx.c ncr53c7xx
file dev/ic/dp8390.c dp8390nic
file dev/ic/rtl80x9.c rtl80x9
file dev/ic/tea5757.c tea5757
-# $OpenBSD: files.cardbus,v 1.30 2014/11/24 02:03:37 brad Exp $
+# $OpenBSD: files.cardbus,v 1.31 2018/02/14 23:51:49 jsg Exp $
# $NetBSD: files.cardbus,v 1.8 2000/01/26 06:37:24 thorpej Exp $
#
# files.cardbus
attach ohci at cardbus with ohci_cardbus
file dev/cardbus/ohci_cardbus.c ohci_cardbus
-#
-# Adaptec ADP-1480 SCSI controller
-#
-#attach ahc at cardbus with ahc_cardbus: ahc_seeprom, smc93cx6
-#file dev/cardbus/ahc_cardbus.c ahc_cardbus
-
#
# UHCI USB controller
#
-# $OpenBSD: files.isa,v 1.123 2016/09/04 10:35:39 tedu Exp $
+# $OpenBSD: files.isa,v 1.124 2018/02/14 23:51:49 jsg Exp $
# $NetBSD: files.isa,v 1.21 1996/05/16 03:45:55 mycroft Exp $
#
# Config file and device description for machine-independent ISA code.
attach ie at isa with ie_isa: elink
file dev/isa/if_ie.c ie_isa
-# Intel i82595-based boards.
-# (Intel EtherExpress PRO/100)
-device iy: ether, ifnet
-attach iy at isa
-file dev/isa/if_iy.c iy
-
# Intel EtherExpress PRO/10
device ex: ether, ifnet
attach ex at isa
attach sb at isa with sb_isa
file dev/isa/sb_isa.c sb & (sb_isa | sb_isapnp)
-# Soundcards based on Sierra's Aria chipset.
-# Such as the Prometheus Aria 16 or the Diamond
-# sonic sound.
-device aria: audio
-attach aria at isa
-file dev/isa/aria.c aria
-
# ProAudio Spectrum
device pas: audio, isa_dma, sbdsp
attach pas at isa
device isagpio: gpiobus
attach isagpio at isa
file dev/isa/isagpio.c isagpio
-
-#
-# PCMCIA PCIC (i82365SL and compatibles):
-#
-#device pcicmaster {[irq = -1], [iomem = -1], [iosiz = 0]}
-#attach pcicmaster at isa
-#device pcic: pcmciabus
-#attach pcic at pcicmaster
-#file dev/isa/pcmcia_pcic.c pcic | pcicmaster
-
-#file dev/isa/pcmcia_isa.c pcmcia
-# $OpenBSD: files.pcmcia,v 1.46 2016/09/03 16:18:21 tedu Exp $
+# $OpenBSD: files.pcmcia,v 1.47 2018/02/14 23:51:49 jsg Exp $
# $NetBSD: files.pcmcia,v 1.9 1998/06/21 18:45:41 christos Exp $
#
# Config.new file and device description for machine-independent PCMCIA code.
attach sm at pcmcia with sm_pcmcia
file dev/pcmcia/if_sm_pcmcia.c sm_pcmcia
-# MB8696x Ethernet Controllers (i.e. TDK LAK CD021BX)
-#attach mbe at pcmcia with mbe_pcmcia
-#file dev/pcmcia/if_mbe_pcmcia.c mbe_pcmcia
-
# Xircom Ethernet controllers
device xe: ether, ifnet, mii, ifmedia
attach xe at pcmcia with xe_pcmcia
file dev/pcmcia/if_xe.c xe_pcmcia
-# PCMCIA Floppy controller
-#attach fdc at pcmcia with fdc_pcmcia
-#file dev/pcmcia/fdc_pcmcia.c fdc_pcmcia
-
-# PCMCIA multi-port serial cards
-#device pcmcom {[slave = -1]}
-#attach pcmcom at pcmcia
-#attach com at pcmcom with com_pcmcom
-#file dev/pcmcia/pcmcom.c pcmcom | com_pcmcom needs-flag
-
# Lucent WaveLAN
attach wi at pcmcia with wi_pcmcia
file dev/pcmcia/if_wi_pcmcia.c wi_pcmcia
-# $OpenBSD: files.sbus,v 1.43 2015/06/19 11:12:24 jmatthew Exp $
+# $OpenBSD: files.sbus,v 1.44 2018/02/14 23:51:49 jsg Exp $
# $NetBSD: files.sbus,v 1.16 2000/12/08 17:29:12 martin Exp $
#
# Config file and device description for machine-independent SBUS code.
# Included by ports that need it.
device sbus {[slot = -1], [offset = -1]}
-#notyet:file dev/sbus/sbus.c sbus
# SBus NCR539x SCSI & Lance Ethernet
device dma {}: lsi64854
-# $OpenBSD: files.tc,v 1.14 2017/11/02 14:04:24 mpi Exp $
+# $OpenBSD: files.tc,v 1.15 2018/02/14 23:51:49 jsg Exp $
# $NetBSD: files.tc,v 1.26 2001/11/28 10:21:24 lukem Exp $
#
# Config file and device description for machine-independent
device zstty: tty
attach zstty at zs
file dev/ic/z8530tty.c zstty needs-flag
-
-#attach vsms at zs with zsms
-#file dev/tc/zsms.c zsms
-
-#attach lkkbd at zs with zskbd
-#file dev/tc/zskbd.c zskbd needs-flag
projects / openbsd / commitdiff