######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
#
-# $OpenBSD: termtypes.master,v 1.18 2000/03/14 17:22:15 millert Exp $
+# $OpenBSD: termtypes.master,v 1.19 2000/03/23 14:29:35 millert Exp $
#
# This version of terminfo.src is distributed with ncurses.
# Report bugs to
# bug-ncurses@gnu.org
#
# Version 10.2.1
-# Date: 2000/03/05 03:53:58
+# Date: 2000/03/19 23:06:50
# terminfo syntax
#
# Eric S. Raymond (current maintainer)
cols#132, lines#66,
bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
glasstty|classic glass tty interpreting ASCII control characters,
- am,
+ OTbs, am,
cols#80,
- bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H,
- kcub1=^H, kcud1=^J, nel=^M^J,
+ bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H,
+ kcud1=^J, nel=^M^J, .kbs=^H,
+
+vanilla,
+ OTbs,
+ bel=^G, cr=^M, cud1=^J, ind=^J,
#### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
#
# See the end-of-file comment for more on these.
#
+# ANSI capabilities are broken up into pieces, so that a terminal
+# implementing some ANSI subset can use many of them.
+ansi+local1,
+ cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
+ansi+local,
+ cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
+ cuu=\E[%p1%dA,
+ use=ansi+local1,
+ansi+tabs,
+ cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[2g,
+ansi+inittabs,
+ it#8, use=ansi+tabs,
+ansi+erase,
+ clear=\E[H\E[J, ed=\E[J, el=\E[K,
+ansi+rca,
+ hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
+ansi+cup,
+ cup=\E[%i%p1%d;%p2%dH, home=\E[H,
+ansi+rep,
+ rep=%p1%c\E[%p2%{1}%-%db,
+ansi+idl1,
+ dl1=\E[M, il1=\E[L,
+ansi+idl,
+ dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
+ansi+idc,
+ dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6,
+ansi+arrows,
+ kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ khome=\E[H,
+ansi+sgr|ansi graphic renditions,
+ blink=\E[5m, invis=\E[8m, rev=\E[7m, sgr0=\E[0m,
+ansi+sgrso|ansi standout only,
+ rmso=\E[m, smso=\E[7m,
+ansi+sgrul|ansi underline only,
+ rmul=\E[m, smul=\E[4m,
+ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
+ bold=\E[1m,
+ sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m, use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
+ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
+ dim=\E[2m,
+ sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;m, use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
+ansi+pp|ansi printer port,
+ mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
+ansi+csr|ansi scroll-region plus cursor save & restore,
+ csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
+
# The IBM PC alternate character set. Plug this into any Intel console entry.
# We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
# ROM graphics for control characters such as the diamond, up- and down-arrow.
# if you're in doubt about what `ANSI' matches yours, try them in that
# order and back off from the first that breaks.
+# ansi-mr is for ANSI terminals with ONLY relative cursor addressing
+# and more than one page of memory. It uses local motions instead of
+# direct cursor addressing, and makes almost no assumptions. It does
+# assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
+ansi-mr|mem rel cup ansi,
+ am, xon,
+ cols#80, lines#24, use=vanilla, use=ansi+erase,
+ use=ansi+local1,
+
+# ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
+# beware of screen size problems and memory relative cursor addressing.
ansi-mini|any ansi terminal with pessimistic assumptions,
- OTbs, am,
- cols#80, it#8, lines#24,
- clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
- ht=^I,
+ am, xon,
+ cols#80, lines#24, use=vanilla, use=ansi+cup,
+ use=ansi+erase,
+
+# ansi-mtabs adds relative addressing and minimal tab support
+ansi-mtabs|any ansi terminal with pessimistic assumptions,
+ it#8,
+ ht=^I, use=ansi+local1, use=ansi-mini,
# ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
#
u9=\E[c,
use=ecma+color, use=klone+sgr, use=ansi-m,
+# ansi-generic is a vanilla ANSI terminal. This is assumed to implement
+# all the normal ANSI stuff with no extensions. It assumes
+# insert/delete line/char is there, so it won't work with
+# vt100 clones. It assumes video attributes for bold, blink,
+# underline, and reverse, which won't matter much if the terminal
+# can't do some of those. Padding is assumed to be zero, which
+# shouldn't hurt since xon/xoff is assumed.
+ansi-generic|generic ansi standard terminal,
+ am, xon,
+ cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
+ use=ansi+rca, use=ansi+erase, use=ansi+tabs,
+ use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
+ use=ansi+sgrbold, use=ansi+arrows,
+
#### DOS ANSI.SYS variants
#
# This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
# Another entry for KOI8-r with Qing Long's acsc.
# (which one better complies with the standard?)
linux-koi8r|linux with koi8-r alternate character set,
- kbs=^H, kcub1=^H, kcud1=^J,
use=linux, use=klone+koi8acs,
# Entry for the latin1 and latin2 fonts
vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
OTbs, OTpt, am, mir, xenl, xon,
cols#80, lines#24, vt#3,
- OTnl=^J,
+ OTnl=^J,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
smso=\E[7m, smul=\E[4m,
# A much better description of the VT200/220; used to be vt220-8
+# changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
+# designation to accommodate bug in pcvt -TD
vt220|vt200|dec vt220,
OTbs, am, mc5i, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~,
kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i,
mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
- rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m,
- rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=\E(0,
+ rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m,
+ rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=\E(0$<2>,
smam=\E[?7h, smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
vt220-w|vt200-w|DEC vt220 in wide mode,
cols#132,
# Compatible with the R6 xterm
# (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
# added khome/kend, hts based on the R6 xterm code - TD
+# (khome/kend do not actually work in X11R5 or X11R6, but many people use this
+# for compatibility with other emulators).
xterm-r6|xterm-old|xterm X11R6 version,
OTbs, am, km, mir, msgr, xenl,
cols#80, it#8, lines#24,
# Since rxvt is not really compatible with xterm, it should be configured as
# "rxvt" (monochrome) and "rxvt-color".
rxvt-basic|rxvt terminal base (X Window System),
- am, bce, eo, km, mir, msgr, xenl, xon,
+ OTbs, am, bce, eo, km, mir, msgr, xenl, xon,
cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
# variant of xterm which is apparently no longer supported, but are interesting
# because they illustrate SVr4 curses mouse controls - T.Dickey
xtermm|xterm terminal emulator (monocrome),
- am, km, mir, msgr, xenl,
+ OTbs, am, km, mir, msgr, xenl,
btns#3, cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
#
# (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
+ OTbs,
lines#31,
is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8, use=news-old-unk,
#
# bg300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
# vt220-8bit, vt220-old, wy85-8bit
#
+# 2000/3/18
+# * add several terminal types from esr's "11.0.1" (ansi-*).
+# * update OTxx capabilities for changes on 2000/3/4.
+# * revert part of vt220 change (request by Todd C Miller for OpenBSD)
+#
# The following sets edit modes for GNU EMACS.
# Local Variables:
# fill-prefix:"\t"
projects / openbsd / commitdiff