build arm64 install*.img

requested by kettenis, first testing by kn

diff --git a/distrib/arm64/iso/Makefile b/distrib/arm64/iso/Makefile
new file mode 100644 (file)
index 0000000..3d5ba18
--- /dev/null
+++ b/distrib/arm64/iso/Makefile
@@ -0,0 +1,90 @@
+#      $OpenBSD: Makefile,v 1.1 2021/04/10 21:02:36 deraadt Exp $
+
+FS=            install${OSrev}.img
+FSSIZE=                1032192
+FSDISKTYPE=    install
+
+MOUNT_POINT=   /mnt
+
+RELXDIR?=      /home/relx-${MACHINE}
+RELDIR?=       /home/rel-${MACHINE}
+
+BASE=          ${RELDIR}/base${OSrev}.tgz ${RELDIR}/comp${OSrev}.tgz \
+               ${RELDIR}/game${OSrev}.tgz ${RELDIR}/man${OSrev}.tgz \
+               ${RELDIR}/bsd ${RELDIR}/bsd.mp ${RELDIR}/bsd.rd \
+               ${RELDIR}/INSTALL.${MACHINE}
+XBASE=         ${RELXDIR}/xbase${OSrev}.tgz ${RELXDIR}/xfont${OSrev}.tgz \
+               ${RELXDIR}/xshare${OSrev}.tgz ${RELXDIR}/xserv${OSrev}.tgz
+
+MSDOSSTART=    32768
+MSDOSSIZE=     8192
+FFSSTART!=     expr ${MSDOSSTART} + ${MSDOSSIZE}
+
+NEWFS_ARGS_msdos=-L boot -c1 -F16
+MOUNT_ARGS_msdos=-o-l
+
+PDTB=          /usr/local/share/dtb/arm64
+PUBOOT=                /usr/local/share/u-boot
+PRPI=          /usr/local/share/raspberrypi-firmware/boot
+
+PIFILES=\
+       bootcode.bin \
+       start.elf \
+       fixup.dat \
+       bcm2710-rpi-3-b.dtb \
+       bcm2710-rpi-3-b-plus.dtb \
+       bcm2710-rpi-cm3.dtb
+
+PIDTBO=\
+       disable-bt.dtbo
+
+all: ${FS}
+
+${FS}: ${BASE} ${XBASE}
+       dd if=/dev/zero of=${FS} bs=512 count=${FSSIZE}
+       vnconfig -v ${FS} > vnd
+       echo 'u\ne 0\nc\nn\n${MSDOSSTART}\n${MSDOSSIZE}\ne 3\nA6\nn\n${FFSSTART}\n*\nf 0\nw\nq\n' \
+           | fdisk -e `cat vnd` >/dev/null
+       echo 'a a\n\n\n\nw\nq\n' | disklabel -E `cat vnd` >/dev/null
+       newfs -t msdos ${NEWFS_ARGS_msdos} /dev/r`cat vnd`i
+       mount ${MOUNT_ARGS_msdos} /dev/`cat vnd`i ${MOUNT_POINT}
+.for FILE in ${PIFILES}
+       cp ${PRPI}/${FILE} ${MOUNT_POINT}/
+.endfor
+       mkdir -p ${MOUNT_POINT}/overlays
+.for FILE in ${PIDTBO}
+       cp ${PRPI}/overlays/${FILE} ${MOUNT_POINT}/overlays/
+.endfor
+       cp ${PUBOOT}/rpi_3/u-boot.bin ${MOUNT_POINT}/
+       mkdir -p ${MOUNT_POINT}/efi/boot
+       cp /usr/mdec/BOOTAA64.EFI ${MOUNT_POINT}/efi/boot/bootaa64.efi
+       echo bootaa64.efi > ${MOUNT_POINT}/efi/boot/startup.nsh
+       echo 'arm_64bit=1\nenable_uart=1\ndtoverlay=disable-bt\nkernel=u-boot.bin' > ${MOUNT_POINT}/config.txt
+       dd if=${PUBOOT}/pine64_plus/u-boot-sunxi-with-spl.bin \
+           of=/dev/r`cat vnd`c bs=1024 seek=8 conv=sync
+       umount ${MOUNT_POINT}
+
+       newfs -O 1 -m 0 -o space -i 524288 -c ${FSSIZE} /dev/r`cat vnd`a
+       mount /dev/`cat vnd`a ${MOUNT_POINT}
+       mkdir -p ${MOUNT_POINT}/${OSREV}/${MACHINE}
+       cp -p ${BASE} ${MOUNT_POINT}/${OSREV}/${MACHINE}
+       cp -p ${XBASE} ${MOUNT_POINT}/${OSREV}/${MACHINE}
+       ln ${MOUNT_POINT}/${OSREV}/${MACHINE}/bsd.rd ${MOUNT_POINT}/bsd.rd
+       ln ${MOUNT_POINT}/${OSREV}/${MACHINE}/bsd.rd ${MOUNT_POINT}/bsd
+
+       cat ${RELDIR}/SHA256 ${RELXDIR}/SHA256 > \
+           ${MOUNT_POINT}/${OSREV}/${MACHINE}/SHA256
+       # XXX no SHA256.sig
+       df -i ${MOUNT_POINT}
+       umount ${MOUNT_POINT}
+       vnconfig -u `cat vnd`
+       rm -f vnd
+
+install:
+       cp ${CDROM} ${FS} ${RELDIR}/
+
+clean cleandir:
+       rm -f ${CDROM} ${FS}
+       rm -rf cd-dir
+
+.include <bsd.obj.mk>