# This is the Makefile for Taylor UUCP
-# $Id: Makefile,v 1.1.1.1 1995/10/18 08:38:22 deraadt Exp $
+# $Id: Makefile,v 1.2 1996/12/08 22:39:31 tholo Exp $
SUBDIR= libunix libuucp libuuconf \
cu uuchk uucico uuconv uucp uulog uuname uupick uusched \
- uustat uuto uux uuxqt
+ uustat uuto uux uuxqt \
+ sample
.include <bsd.subdir.mk>
--- /dev/null
+# $OpenBSD: Makefile,v 1.1 1996/12/08 22:39:32 tholo Exp $
+
+FILES= call config dial dialcode passwd port sys
+NOOBJ= noobj
+
+install:
+ @echo installing ${FILES}
+ @-for i in ${FILES}; do \
+ if [ ! -f ${DESTDIR}/etc/uucp/$$i ]; then \
+ ${INSTALL} ${COPY} -o root -g wheel -m 644 $$i \
+ ${DESTDIR}/etc/uucp; \
+ fi; \
+ done
+
+.include <bsd.prog.mk>
# to connect to the remote system.
# The format is just system-name login-name password.
-uunet Uairs foobar
+#uunet Uairs foobar
# but not permitting remote users to actually log in to the system.
# The format is just login-name password.
-Uairs foobar
+#Uairs foobar
# for all ports that appear later in the file. In this case all ports
# will default to being modems (other possible types are direct, tcp
# and tli).
-type modem
+#type modem
# Now we describe two ports.
# This is the name of the port. This name may be used in the sys file
# to select the port, or the sys file may just specify a baud rate in
# which case the first matching unlocked port will be used.
-port port1
+#port port1
# This is the device name to open to dial out.
-device /dev/ttyd0
+#device /dev/ttyd0
# This is the dialer to use, as described in the dialer file.
-dialer hayes
+#dialer hayes
# This is the baud rate to dial out at.
-speed 2400
+#speed 2400
# Here is a second port. This is like the first, except that it uses
# a different device. It also permits a range of speeds, which is
# mainly useful if the system specifies a particular baud rate.
-port port2
-device /dev/ttyd1
-dialer hayes
-speed-range 2400 9600
+#port port2
+#device /dev/ttyd1
+#dialer hayes
+#speed-range 2400 9600
--- /dev/null
+# This is an example of a sys file, the file(s) which describe remote
+# systems for Taylor UUCP. To use it, you must compile the package
+# with HAVE_TAYLOR_CONFIG set to 1 in policy.h (that is the default),
+# copy this file to newconfigdir as set in Makefile.in (the default is
+# /usr/local/conf/uucp), and edit it as appropriate for your system.
+
+# If you do not use the ``unknown'' command in the config file, then
+# each system that you communicate with must be listed in a sys file.
+
+# Everything after a '#' character is a comment. To uncomment any of
+# the sample lines below, just delete the '#'.
+
+# This is a sample sys file that might be used in a leaf system. A
+# leaf system is one that only contacts one other system. sys2
+# provides another example.
+
+# The name of the remote system that we call.
+#system uunet
+
+# The login name and password are kept in the callout password file
+# (by default this is the file "call" in newconfigdir).
+#call-login *
+#call-password *
+
+# We can send anything at any time.
+#time any
+
+# During the day we only accept grade 'Z' or above; at other times
+# (not mentioned here) we accept all grades. uunet queues up news
+# at grade 'd', which is lower than 'Z'.
+#call-timegrade Z Wk0755-2305,Su1655-2305
+
+# The phone number to call.
+#phone 7389449
+
+# uunet tends to be slow, so we increase the timeout
+#chat-timeout 120
+
+# The port we use to dial out.
+#port serial
+
+# Increase the timeout and the number of retries.
+#protocol-parameter g timeout 20
+#protocol-parameter g retries 10
+++ /dev/null
-# This is an example of a sys file, the file(s) which describe remote
-# systems for Taylor UUCP. To use it, you must compile the package
-# with HAVE_TAYLOR_CONFIG set to 1 in policy.h (that is the default),
-# copy this file to newconfigdir as set in Makefile.in (the default is
-# /usr/local/conf/uucp), and edit it as appropriate for your system.
-
-# If you do not use the ``unknown'' command in the config file, then
-# each system that you communicate with must be listed in a sys file.
-
-# Everything after a '#' character is a comment. To uncomment any of
-# the sample lines below, just delete the '#'.
-
-# This is a sample sys file that might be used in a leaf system. A
-# leaf system is one that only contacts one other system. sys2
-# provides another example.
-
-# The name of the remote system that we call.
-system uunet
-
-# The login name and password are kept in the callout password file
-# (by default this is the file "call" in newconfigdir).
-call-login *
-call-password *
-
-# We can send anything at any time.
-time any
-
-# During the day we only accept grade 'Z' or above; at other times
-# (not mentioned here) we accept all grades. uunet queues up news
-# at grade 'd', which is lower than 'Z'.
-call-timegrade Z Wk0755-2305,Su1655-2305
-
-# The phone number to call.
-phone 7389449
-
-# uunet tends to be slow, so we increase the timeout
-chat-timeout 120
-
-# The port we use to dial out.
-port serial
-
-# Increase the timeout and the number of retries.
-protocol-parameter g timeout 20
-protocol-parameter g retries 10
projects / openbsd / commitdiff