+# $OpenBSD: Makefile,v 1.3 1997/02/28 10:02:18 downsj Exp $
# $NetBSD: Makefile,v 1.3 1996/01/25 07:19:54 phil Exp $
# Makefile for man4/man4.pc532
MAN= lpt.4 mem.4 plip.4
MANSUBDIR=/pc532
-plip.cat4:
- tbl ${.IMPSRC} | nroff -mandoc > ${.TARGET}
-
.include <bsd.prog.mk>
+++ /dev/null
-.\" $NetBSD: plip.4,v 1.3 1995/11/28 08:03:31 jtc Exp $
-.\"
-.\" Copyright (c) 1994 Matthias Pfaller.
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\" must display the following acknowledgement:
-.\" This product includes software developed by Matthias Pfaller.
-.\" 4. The name of the author may not be used to endorse or promote products
-.\" derived from this software without specific prior written permission
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\"
-.Dd December 1, 1994
-.Dt PLIP 4 pc532
-.Os
-.Sh NAME
-.Nm plip
-.Nd "Option for the lpt driver to allow IP over centronics ports"
-.Sh SYNOPSIS
-.Cd "options PLIP"
-.Cd "options COMPAT_PLIP10"
-.Cd "options COMPAT_PLIP11"
-.Sh DESCRIPTION
-The
-.Nm
-interface provides a way to transport IP over centronics ports.
-Protocols to communicate with Linux 1.0 and Linux 1.1 hosts are provided.
-By default the 1.1 protocol is used. To choose the 1.0 protocol use
-the link0 flag with
-.Xr ifconfig 8
-or in your /etc/hostname.plip? file. In order to use the 1.0 protocol
-the kernel has to be compiled with COMPAT_PLIP10.
-.br
-The COMPAT_PLIP11 option selects a default MTU of 1486 bytes. This is
-necessary to work around a bug that is present in the plip code for
-Linux 1.1.x and Linux 1.2.x.
-.Sh NOTES
-To connect two computers a "Laplink parallel cabel" is used:
-.sp
-.TS
-allbox tab(|);
-c|c|c|c
-l|n|n|l.
-Signalname|Con A|Con B|Description
-Data 0|2|15|Data out 0
-Data 1|3|13|Data out 1
-Data 2|4|12|Data out 2
-Data 3|5|10|Data out 3/Wake out
-Data 4|6|11|Data clock out
-/Ack|10|5|Data in 3/Wake in
-Busy|11|6|Data clock in
-No Paper|12|4|Data in 2
-Select|13|3|Data in 1
-/Error|15|2|Data in 0
-Gnd|18-25|18-25|Ground
-.TE
-.sp
-In both protocol versions ethernet frames are used. The 1.0 protocol assings
-an ethernet address of the form FD:FD:ww:xx:yy:zz to the interface. The 1.1
-protocol uses FC instead of FD. ww, xx, yy and zz are taken from the internet
-address ww.xx.yy.zz of the interface. Ethernet support has
-to be configured into the kernel in order to use the
-.Nm
-interface.
-.Sh SEE ALSO
-.Xr lpt 4
-.Xr ifconfig 8
-.Sh DIAGNOSTICS
-.Bl -diag
-.It "plip?: tx hard error"
-Packet transmission failed even after PLIPMXRETRY (20) retries.
-.It "plip?: rx hard error"
-PLIPMXERRS (20) packets caused receive errors in sequence.
-.It "plip?: checksum error"
-A packet with a bad checksum was received.
-.It "plip?: packet > MTU"
-A bogus packet longer then the MTU was received.
-.El
--- /dev/null
+.\" $NetBSD: plip.4,v 1.3 1995/11/28 08:03:31 jtc Exp $
+.\"
+.\" Copyright (c) 1994 Matthias Pfaller.
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\" notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\" notice, this list of conditions and the following disclaimer in the
+.\" documentation and/or other materials provided with the distribution.
+.\" 3. All advertising materials mentioning features or use of this software
+.\" must display the following acknowledgement:
+.\" This product includes software developed by Matthias Pfaller.
+.\" 4. The name of the author may not be used to endorse or promote products
+.\" derived from this software without specific prior written permission
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+.\"
+.\"
+.Dd December 1, 1994
+.Dt PLIP 4 pc532
+.Os
+.Sh NAME
+.Nm plip
+.Nd "Option for the lpt driver to allow IP over centronics ports"
+.Sh SYNOPSIS
+.Cd "options PLIP"
+.Cd "options COMPAT_PLIP10"
+.Cd "options COMPAT_PLIP11"
+.Sh DESCRIPTION
+The
+.Nm
+interface provides a way to transport IP over centronics ports.
+Protocols to communicate with Linux 1.0 and Linux 1.1 hosts are provided.
+By default the 1.1 protocol is used. To choose the 1.0 protocol use
+the link0 flag with
+.Xr ifconfig 8
+or in your /etc/hostname.plip? file. In order to use the 1.0 protocol
+the kernel has to be compiled with COMPAT_PLIP10.
+.br
+The COMPAT_PLIP11 option selects a default MTU of 1486 bytes. This is
+necessary to work around a bug that is present in the plip code for
+Linux 1.1.x and Linux 1.2.x.
+.Sh NOTES
+To connect two computers a "Laplink parallel cabel" is used:
+.sp
+.TS
+allbox tab(|);
+c|c|c|c
+l|n|n|l.
+Signalname|Con A|Con B|Description
+Data 0|2|15|Data out 0
+Data 1|3|13|Data out 1
+Data 2|4|12|Data out 2
+Data 3|5|10|Data out 3/Wake out
+Data 4|6|11|Data clock out
+/Ack|10|5|Data in 3/Wake in
+Busy|11|6|Data clock in
+No Paper|12|4|Data in 2
+Select|13|3|Data in 1
+/Error|15|2|Data in 0
+Gnd|18-25|18-25|Ground
+.TE
+.sp
+In both protocol versions ethernet frames are used. The 1.0 protocol assings
+an ethernet address of the form FD:FD:ww:xx:yy:zz to the interface. The 1.1
+protocol uses FC instead of FD. ww, xx, yy and zz are taken from the internet
+address ww.xx.yy.zz of the interface. Ethernet support has
+to be configured into the kernel in order to use the
+.Nm
+interface.
+.Sh SEE ALSO
+.Xr lpt 4
+.Xr ifconfig 8
+.Sh DIAGNOSTICS
+.Bl -diag
+.It "plip?: tx hard error"
+Packet transmission failed even after PLIPMXRETRY (20) retries.
+.It "plip?: rx hard error"
+PLIPMXERRS (20) packets caused receive errors in sequence.
+.It "plip?: checksum error"
+A packet with a bad checksum was received.
+.It "plip?: packet > MTU"
+A bogus packet longer then the MTU was received.
+.El
projects / openbsd / commitdiff