--- /dev/null
+# $OpenBSD: Makefile,v 1.1.1.1 2022/03/24 19:41:06 bluhm Exp $
+
+# compile and run zlib test files from upstream
+# https://github.com/madler/zlib/tree/master/test
+
+PROGS= example infcover minigzip
+LDADD= -lz
+DPADD= ${LIBZ}
+CPPFLAGS= -I${.CURDIR}/../../../lib/libz
+WARNINGS= Yes
+CLEANFILES= in out out.gz
+
+REGRESS_TARGETS= run-regress-example run-regress-infcover
+
+.for stategy in default filtered huffman rle
+.for level in 0 1 2 3 4 5 6 7 8 9
+.for zero rand in 0 0 0 1 1 0 0 10 5 5 10 0
+
+REGRESS_TARGETS+= run-${stategy}-level${level}-zero${zero}-rand${rand}
+
+run-${stategy}-level${level}-zero${zero}-rand${rand}: minigzip
+ rm -f in out out.gz
+ dd status=none seek=${zero} count=${rand} if=/dev/random of=in bs=1k
+ ./minigzip ${stategy:Ndefault:C/^([frh]).*/-\1/} ${level:N0:S/^/-/} \
+ <in >out.gz
+ gunzip -k out.gz
+ cmp in out
+
+.endfor
+.endfor
+.endfor
+
+.include <bsd.regress.mk>
--- /dev/null
+/* example.c -- usage example of the zlib compression library
+ * Copyright (C) 1995-2006, 2011, 2016 Jean-loup Gailly
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* @(#) $Id: example.c,v 1.1.1.1 2022/03/24 19:41:06 bluhm Exp $ */
+
+#include "zlib.h"
+#include <stdio.h>
+
+#ifdef STDC
+# include <string.h>
+# include <stdlib.h>
+#endif
+
+#if defined(VMS) || defined(RISCOS)
+# define TESTFILE "foo-gz"
+#else
+# define TESTFILE "foo.gz"
+#endif
+
+#define CHECK_ERR(err, msg) { \
+ if (err != Z_OK) { \
+ fprintf(stderr, "%s error: %d\n", msg, err); \
+ exit(1); \
+ } \
+}
+
+static z_const char hello[] = "hello, hello!";
+/* "hello world" would be more standard, but the repeated "hello"
+ * stresses the compression code better, sorry...
+ */
+
+static const char dictionary[] = "hello";
+static uLong dictId; /* Adler32 value of the dictionary */
+
+void test_deflate OF((Byte *compr, uLong comprLen));
+void test_inflate OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_large_deflate OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_large_inflate OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_flush OF((Byte *compr, uLong *comprLen));
+void test_sync OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_dict_deflate OF((Byte *compr, uLong comprLen));
+void test_dict_inflate OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+int main OF((int argc, char *argv[]));
+
+
+#ifdef Z_SOLO
+
+void *myalloc OF((void *, unsigned, unsigned));
+void myfree OF((void *, void *));
+
+void *myalloc(q, n, m)
+ void *q;
+ unsigned n, m;
+{
+ (void)q;
+ return calloc(n, m);
+}
+
+void myfree(void *q, void *p)
+{
+ (void)q;
+ free(p);
+}
+
+static alloc_func zalloc = myalloc;
+static free_func zfree = myfree;
+
+#else /* !Z_SOLO */
+
+static alloc_func zalloc = (alloc_func)0;
+static free_func zfree = (free_func)0;
+
+void test_compress OF((Byte *compr, uLong comprLen,
+ Byte *uncompr, uLong uncomprLen));
+void test_gzio OF((const char *fname,
+ Byte *uncompr, uLong uncomprLen));
+
+/* ===========================================================================
+ * Test compress() and uncompress()
+ */
+void test_compress(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ uLong len = (uLong)strlen(hello)+1;
+
+ err = compress(compr, &comprLen, (const Bytef*)hello, len);
+ CHECK_ERR(err, "compress");
+
+ strcpy((char*)uncompr, "garbage");
+
+ err = uncompress(uncompr, &uncomprLen, compr, comprLen);
+ CHECK_ERR(err, "uncompress");
+
+ if (strcmp((char*)uncompr, hello)) {
+ fprintf(stderr, "bad uncompress\n");
+ exit(1);
+ } else {
+ printf("uncompress(): %s\n", (char *)uncompr);
+ }
+}
+
+/* ===========================================================================
+ * Test read/write of .gz files
+ */
+void test_gzio(fname, uncompr, uncomprLen)
+ const char *fname; /* compressed file name */
+ Byte *uncompr;
+ uLong uncomprLen;
+{
+#ifdef NO_GZCOMPRESS
+ fprintf(stderr, "NO_GZCOMPRESS -- gz* functions cannot compress\n");
+#else
+ int err;
+ int len = (int)strlen(hello)+1;
+ gzFile file;
+ z_off_t pos;
+
+ file = gzopen(fname, "wb");
+ if (file == NULL) {
+ fprintf(stderr, "gzopen error\n");
+ exit(1);
+ }
+ gzputc(file, 'h');
+ if (gzputs(file, "ello") != 4) {
+ fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err));
+ exit(1);
+ }
+ if (gzprintf(file, ", %s!", "hello") != 8) {
+ fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err));
+ exit(1);
+ }
+ gzseek(file, 1L, SEEK_CUR); /* add one zero byte */
+ gzclose(file);
+
+ file = gzopen(fname, "rb");
+ if (file == NULL) {
+ fprintf(stderr, "gzopen error\n");
+ exit(1);
+ }
+ strcpy((char*)uncompr, "garbage");
+
+ if (gzread(file, uncompr, (unsigned)uncomprLen) != len) {
+ fprintf(stderr, "gzread err: %s\n", gzerror(file, &err));
+ exit(1);
+ }
+ if (strcmp((char*)uncompr, hello)) {
+ fprintf(stderr, "bad gzread: %s\n", (char*)uncompr);
+ exit(1);
+ } else {
+ printf("gzread(): %s\n", (char*)uncompr);
+ }
+
+ pos = gzseek(file, -8L, SEEK_CUR);
+ if (pos != 6 || gztell(file) != pos) {
+ fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n",
+ (long)pos, (long)gztell(file));
+ exit(1);
+ }
+
+ if (gzgetc(file) != ' ') {
+ fprintf(stderr, "gzgetc error\n");
+ exit(1);
+ }
+
+ if (gzungetc(' ', file) != ' ') {
+ fprintf(stderr, "gzungetc error\n");
+ exit(1);
+ }
+
+ gzgets(file, (char*)uncompr, (int)uncomprLen);
+ if (strlen((char*)uncompr) != 7) { /* " hello!" */
+ fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err));
+ exit(1);
+ }
+ if (strcmp((char*)uncompr, hello + 6)) {
+ fprintf(stderr, "bad gzgets after gzseek\n");
+ exit(1);
+ } else {
+ printf("gzgets() after gzseek: %s\n", (char*)uncompr);
+ }
+
+ gzclose(file);
+#endif
+}
+
+#endif /* Z_SOLO */
+
+/* ===========================================================================
+ * Test deflate() with small buffers
+ */
+void test_deflate(compr, comprLen)
+ Byte *compr;
+ uLong comprLen;
+{
+ z_stream c_stream; /* compression stream */
+ int err;
+ uLong len = (uLong)strlen(hello)+1;
+
+ c_stream.zalloc = zalloc;
+ c_stream.zfree = zfree;
+ c_stream.opaque = (voidpf)0;
+
+ err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
+ CHECK_ERR(err, "deflateInit");
+
+ c_stream.next_in = (z_const unsigned char *)hello;
+ c_stream.next_out = compr;
+
+ while (c_stream.total_in != len && c_stream.total_out < comprLen) {
+ c_stream.avail_in = c_stream.avail_out = 1; /* force small buffers */
+ err = deflate(&c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "deflate");
+ }
+ /* Finish the stream, still forcing small buffers: */
+ for (;;) {
+ c_stream.avail_out = 1;
+ err = deflate(&c_stream, Z_FINISH);
+ if (err == Z_STREAM_END) break;
+ CHECK_ERR(err, "deflate");
+ }
+
+ err = deflateEnd(&c_stream);
+ CHECK_ERR(err, "deflateEnd");
+}
+
+/* ===========================================================================
+ * Test inflate() with small buffers
+ */
+void test_inflate(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ z_stream d_stream; /* decompression stream */
+
+ strcpy((char*)uncompr, "garbage");
+
+ d_stream.zalloc = zalloc;
+ d_stream.zfree = zfree;
+ d_stream.opaque = (voidpf)0;
+
+ d_stream.next_in = compr;
+ d_stream.avail_in = 0;
+ d_stream.next_out = uncompr;
+
+ err = inflateInit(&d_stream);
+ CHECK_ERR(err, "inflateInit");
+
+ while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) {
+ d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */
+ err = inflate(&d_stream, Z_NO_FLUSH);
+ if (err == Z_STREAM_END) break;
+ CHECK_ERR(err, "inflate");
+ }
+
+ err = inflateEnd(&d_stream);
+ CHECK_ERR(err, "inflateEnd");
+
+ if (strcmp((char*)uncompr, hello)) {
+ fprintf(stderr, "bad inflate\n");
+ exit(1);
+ } else {
+ printf("inflate(): %s\n", (char *)uncompr);
+ }
+}
+
+/* ===========================================================================
+ * Test deflate() with large buffers and dynamic change of compression level
+ */
+void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ z_stream c_stream; /* compression stream */
+ int err;
+
+ c_stream.zalloc = zalloc;
+ c_stream.zfree = zfree;
+ c_stream.opaque = (voidpf)0;
+
+ err = deflateInit(&c_stream, Z_BEST_SPEED);
+ CHECK_ERR(err, "deflateInit");
+
+ c_stream.next_out = compr;
+ c_stream.avail_out = (uInt)comprLen;
+
+ /* At this point, uncompr is still mostly zeroes, so it should compress
+ * very well:
+ */
+ c_stream.next_in = uncompr;
+ c_stream.avail_in = (uInt)uncomprLen;
+ err = deflate(&c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "deflate");
+ if (c_stream.avail_in != 0) {
+ fprintf(stderr, "deflate not greedy\n");
+ exit(1);
+ }
+
+ /* Feed in already compressed data and switch to no compression: */
+ deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY);
+ c_stream.next_in = compr;
+ c_stream.avail_in = (uInt)comprLen/2;
+ err = deflate(&c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "deflate");
+
+ /* Switch back to compressing mode: */
+ deflateParams(&c_stream, Z_BEST_COMPRESSION, Z_FILTERED);
+ c_stream.next_in = uncompr;
+ c_stream.avail_in = (uInt)uncomprLen;
+ err = deflate(&c_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "deflate");
+
+ err = deflate(&c_stream, Z_FINISH);
+ if (err != Z_STREAM_END) {
+ fprintf(stderr, "deflate should report Z_STREAM_END\n");
+ exit(1);
+ }
+ err = deflateEnd(&c_stream);
+ CHECK_ERR(err, "deflateEnd");
+}
+
+/* ===========================================================================
+ * Test inflate() with large buffers
+ */
+void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ z_stream d_stream; /* decompression stream */
+
+ strcpy((char*)uncompr, "garbage");
+
+ d_stream.zalloc = zalloc;
+ d_stream.zfree = zfree;
+ d_stream.opaque = (voidpf)0;
+
+ d_stream.next_in = compr;
+ d_stream.avail_in = (uInt)comprLen;
+
+ err = inflateInit(&d_stream);
+ CHECK_ERR(err, "inflateInit");
+
+ for (;;) {
+ d_stream.next_out = uncompr; /* discard the output */
+ d_stream.avail_out = (uInt)uncomprLen;
+ err = inflate(&d_stream, Z_NO_FLUSH);
+ if (err == Z_STREAM_END) break;
+ CHECK_ERR(err, "large inflate");
+ }
+
+ err = inflateEnd(&d_stream);
+ CHECK_ERR(err, "inflateEnd");
+
+ if (d_stream.total_out != 2*uncomprLen + comprLen/2) {
+ fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out);
+ exit(1);
+ } else {
+ printf("large_inflate(): OK\n");
+ }
+}
+
+/* ===========================================================================
+ * Test deflate() with full flush
+ */
+void test_flush(compr, comprLen)
+ Byte *compr;
+ uLong *comprLen;
+{
+ z_stream c_stream; /* compression stream */
+ int err;
+ uInt len = (uInt)strlen(hello)+1;
+
+ c_stream.zalloc = zalloc;
+ c_stream.zfree = zfree;
+ c_stream.opaque = (voidpf)0;
+
+ err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
+ CHECK_ERR(err, "deflateInit");
+
+ c_stream.next_in = (z_const unsigned char *)hello;
+ c_stream.next_out = compr;
+ c_stream.avail_in = 3;
+ c_stream.avail_out = (uInt)*comprLen;
+ err = deflate(&c_stream, Z_FULL_FLUSH);
+ CHECK_ERR(err, "deflate");
+
+ compr[3]++; /* force an error in first compressed block */
+ c_stream.avail_in = len - 3;
+
+ err = deflate(&c_stream, Z_FINISH);
+ if (err != Z_STREAM_END) {
+ CHECK_ERR(err, "deflate");
+ }
+ err = deflateEnd(&c_stream);
+ CHECK_ERR(err, "deflateEnd");
+
+ *comprLen = c_stream.total_out;
+}
+
+/* ===========================================================================
+ * Test inflateSync()
+ */
+void test_sync(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ z_stream d_stream; /* decompression stream */
+
+ strcpy((char*)uncompr, "garbage");
+
+ d_stream.zalloc = zalloc;
+ d_stream.zfree = zfree;
+ d_stream.opaque = (voidpf)0;
+
+ d_stream.next_in = compr;
+ d_stream.avail_in = 2; /* just read the zlib header */
+
+ err = inflateInit(&d_stream);
+ CHECK_ERR(err, "inflateInit");
+
+ d_stream.next_out = uncompr;
+ d_stream.avail_out = (uInt)uncomprLen;
+
+ err = inflate(&d_stream, Z_NO_FLUSH);
+ CHECK_ERR(err, "inflate");
+
+ d_stream.avail_in = (uInt)comprLen-2; /* read all compressed data */
+ err = inflateSync(&d_stream); /* but skip the damaged part */
+ CHECK_ERR(err, "inflateSync");
+
+ err = inflate(&d_stream, Z_FINISH);
+ if (err != Z_DATA_ERROR) {
+ fprintf(stderr, "inflate should report DATA_ERROR\n");
+ /* Because of incorrect adler32 */
+ exit(1);
+ }
+ err = inflateEnd(&d_stream);
+ CHECK_ERR(err, "inflateEnd");
+
+ printf("after inflateSync(): hel%s\n", (char *)uncompr);
+}
+
+/* ===========================================================================
+ * Test deflate() with preset dictionary
+ */
+void test_dict_deflate(compr, comprLen)
+ Byte *compr;
+ uLong comprLen;
+{
+ z_stream c_stream; /* compression stream */
+ int err;
+
+ c_stream.zalloc = zalloc;
+ c_stream.zfree = zfree;
+ c_stream.opaque = (voidpf)0;
+
+ err = deflateInit(&c_stream, Z_BEST_COMPRESSION);
+ CHECK_ERR(err, "deflateInit");
+
+ err = deflateSetDictionary(&c_stream,
+ (const Bytef*)dictionary, (int)sizeof(dictionary));
+ CHECK_ERR(err, "deflateSetDictionary");
+
+ dictId = c_stream.adler;
+ c_stream.next_out = compr;
+ c_stream.avail_out = (uInt)comprLen;
+
+ c_stream.next_in = (z_const unsigned char *)hello;
+ c_stream.avail_in = (uInt)strlen(hello)+1;
+
+ err = deflate(&c_stream, Z_FINISH);
+ if (err != Z_STREAM_END) {
+ fprintf(stderr, "deflate should report Z_STREAM_END\n");
+ exit(1);
+ }
+ err = deflateEnd(&c_stream);
+ CHECK_ERR(err, "deflateEnd");
+}
+
+/* ===========================================================================
+ * Test inflate() with a preset dictionary
+ */
+void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
+ Byte *compr, *uncompr;
+ uLong comprLen, uncomprLen;
+{
+ int err;
+ z_stream d_stream; /* decompression stream */
+
+ strcpy((char*)uncompr, "garbage");
+
+ d_stream.zalloc = zalloc;
+ d_stream.zfree = zfree;
+ d_stream.opaque = (voidpf)0;
+
+ d_stream.next_in = compr;
+ d_stream.avail_in = (uInt)comprLen;
+
+ err = inflateInit(&d_stream);
+ CHECK_ERR(err, "inflateInit");
+
+ d_stream.next_out = uncompr;
+ d_stream.avail_out = (uInt)uncomprLen;
+
+ for (;;) {
+ err = inflate(&d_stream, Z_NO_FLUSH);
+ if (err == Z_STREAM_END) break;
+ if (err == Z_NEED_DICT) {
+ if (d_stream.adler != dictId) {
+ fprintf(stderr, "unexpected dictionary");
+ exit(1);
+ }
+ err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary,
+ (int)sizeof(dictionary));
+ }
+ CHECK_ERR(err, "inflate with dict");
+ }
+
+ err = inflateEnd(&d_stream);
+ CHECK_ERR(err, "inflateEnd");
+
+ if (strcmp((char*)uncompr, hello)) {
+ fprintf(stderr, "bad inflate with dict\n");
+ exit(1);
+ } else {
+ printf("inflate with dictionary: %s\n", (char *)uncompr);
+ }
+}
+
+/* ===========================================================================
+ * Usage: example [output.gz [input.gz]]
+ */
+
+int main(argc, argv)
+ int argc;
+ char *argv[];
+{
+ Byte *compr, *uncompr;
+ uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */
+ uLong uncomprLen = comprLen;
+ static const char* myVersion = ZLIB_VERSION;
+
+ if (zlibVersion()[0] != myVersion[0]) {
+ fprintf(stderr, "incompatible zlib version\n");
+ exit(1);
+
+ } else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) {
+ fprintf(stderr, "warning: different zlib version\n");
+ }
+
+ printf("zlib version %s = 0x%04x, compile flags = 0x%lx\n",
+ ZLIB_VERSION, ZLIB_VERNUM, zlibCompileFlags());
+
+ compr = (Byte*)calloc((uInt)comprLen, 1);
+ uncompr = (Byte*)calloc((uInt)uncomprLen, 1);
+ /* compr and uncompr are cleared to avoid reading uninitialized
+ * data and to ensure that uncompr compresses well.
+ */
+ if (compr == Z_NULL || uncompr == Z_NULL) {
+ printf("out of memory\n");
+ exit(1);
+ }
+
+#ifdef Z_SOLO
+ (void)argc;
+ (void)argv;
+#else
+ test_compress(compr, comprLen, uncompr, uncomprLen);
+
+ test_gzio((argc > 1 ? argv[1] : TESTFILE),
+ uncompr, uncomprLen);
+#endif
+
+ test_deflate(compr, comprLen);
+ test_inflate(compr, comprLen, uncompr, uncomprLen);
+
+ test_large_deflate(compr, comprLen, uncompr, uncomprLen);
+ test_large_inflate(compr, comprLen, uncompr, uncomprLen);
+
+ test_flush(compr, &comprLen);
+ test_sync(compr, comprLen, uncompr, uncomprLen);
+ comprLen = uncomprLen;
+
+ test_dict_deflate(compr, comprLen);
+ test_dict_inflate(compr, comprLen, uncompr, uncomprLen);
+
+ free(compr);
+ free(uncompr);
+
+ return 0;
+}
--- /dev/null
+/* infcover.c -- test zlib's inflate routines with full code coverage
+ * Copyright (C) 2011, 2016 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* to use, do: ./configure --cover && make cover */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <assert.h>
+#include "zlib.h"
+
+/* get definition of internal structure so we can mess with it (see pull()),
+ and so we can call inflate_trees() (see cover5()) */
+#define ZLIB_INTERNAL
+#include "inftrees.h"
+#include "inflate.h"
+
+#define local static
+
+/* -- memory tracking routines -- */
+
+/*
+ These memory tracking routines are provided to zlib and track all of zlib's
+ allocations and deallocations, check for LIFO operations, keep a current
+ and high water mark of total bytes requested, optionally set a limit on the
+ total memory that can be allocated, and when done check for memory leaks.
+
+ They are used as follows:
+
+ z_stream strm;
+ mem_setup(&strm) initializes the memory tracking and sets the
+ zalloc, zfree, and opaque members of strm to use
+ memory tracking for all zlib operations on strm
+ mem_limit(&strm, limit) sets a limit on the total bytes requested -- a
+ request that exceeds this limit will result in an
+ allocation failure (returns NULL) -- setting the
+ limit to zero means no limit, which is the default
+ after mem_setup()
+ mem_used(&strm, "msg") prints to stderr "msg" and the total bytes used
+ mem_high(&strm, "msg") prints to stderr "msg" and the high water mark
+ mem_done(&strm, "msg") ends memory tracking, releases all allocations
+ for the tracking as well as leaked zlib blocks, if
+ any. If there was anything unusual, such as leaked
+ blocks, non-FIFO frees, or frees of addresses not
+ allocated, then "msg" and information about the
+ problem is printed to stderr. If everything is
+ normal, nothing is printed. mem_done resets the
+ strm members to Z_NULL to use the default memory
+ allocation routines on the next zlib initialization
+ using strm.
+ */
+
+/* these items are strung together in a linked list, one for each allocation */
+struct mem_item {
+ void *ptr; /* pointer to allocated memory */
+ size_t size; /* requested size of allocation */
+ struct mem_item *next; /* pointer to next item in list, or NULL */
+};
+
+/* this structure is at the root of the linked list, and tracks statistics */
+struct mem_zone {
+ struct mem_item *first; /* pointer to first item in list, or NULL */
+ size_t total, highwater; /* total allocations, and largest total */
+ size_t limit; /* memory allocation limit, or 0 if no limit */
+ int notlifo, rogue; /* counts of non-LIFO frees and rogue frees */
+};
+
+/* memory allocation routine to pass to zlib */
+local void *mem_alloc(void *mem, unsigned count, unsigned size)
+{
+ void *ptr;
+ struct mem_item *item;
+ struct mem_zone *zone = mem;
+ size_t len = count * (size_t)size;
+
+ /* induced allocation failure */
+ if (zone == NULL || (zone->limit && zone->total + len > zone->limit))
+ return NULL;
+
+ /* perform allocation using the standard library, fill memory with a
+ non-zero value to make sure that the code isn't depending on zeros */
+ ptr = malloc(len);
+ if (ptr == NULL)
+ return NULL;
+ memset(ptr, 0xa5, len);
+
+ /* create a new item for the list */
+ item = malloc(sizeof(struct mem_item));
+ if (item == NULL) {
+ free(ptr);
+ return NULL;
+ }
+ item->ptr = ptr;
+ item->size = len;
+
+ /* insert item at the beginning of the list */
+ item->next = zone->first;
+ zone->first = item;
+
+ /* update the statistics */
+ zone->total += item->size;
+ if (zone->total > zone->highwater)
+ zone->highwater = zone->total;
+
+ /* return the allocated memory */
+ return ptr;
+}
+
+/* memory free routine to pass to zlib */
+local void mem_free(void *mem, void *ptr)
+{
+ struct mem_item *item, *next;
+ struct mem_zone *zone = mem;
+
+ /* if no zone, just do a free */
+ if (zone == NULL) {
+ free(ptr);
+ return;
+ }
+
+ /* point next to the item that matches ptr, or NULL if not found -- remove
+ the item from the linked list if found */
+ next = zone->first;
+ if (next) {
+ if (next->ptr == ptr)
+ zone->first = next->next; /* first one is it, remove from list */
+ else {
+ do { /* search the linked list */
+ item = next;
+ next = item->next;
+ } while (next != NULL && next->ptr != ptr);
+ if (next) { /* if found, remove from linked list */
+ item->next = next->next;
+ zone->notlifo++; /* not a LIFO free */
+ }
+
+ }
+ }
+
+ /* if found, update the statistics and free the item */
+ if (next) {
+ zone->total -= next->size;
+ free(next);
+ }
+
+ /* if not found, update the rogue count */
+ else
+ zone->rogue++;
+
+ /* in any case, do the requested free with the standard library function */
+ free(ptr);
+}
+
+/* set up a controlled memory allocation space for monitoring, set the stream
+ parameters to the controlled routines, with opaque pointing to the space */
+local void mem_setup(z_stream *strm)
+{
+ struct mem_zone *zone;
+
+ zone = malloc(sizeof(struct mem_zone));
+ assert(zone != NULL);
+ zone->first = NULL;
+ zone->total = 0;
+ zone->highwater = 0;
+ zone->limit = 0;
+ zone->notlifo = 0;
+ zone->rogue = 0;
+ strm->opaque = zone;
+ strm->zalloc = mem_alloc;
+ strm->zfree = mem_free;
+}
+
+/* set a limit on the total memory allocation, or 0 to remove the limit */
+local void mem_limit(z_stream *strm, size_t limit)
+{
+ struct mem_zone *zone = strm->opaque;
+
+ zone->limit = limit;
+}
+
+/* show the current total requested allocations in bytes */
+local void mem_used(z_stream *strm, char *prefix)
+{
+ struct mem_zone *zone = strm->opaque;
+
+ fprintf(stderr, "%s: %lu allocated\n", prefix, zone->total);
+}
+
+/* show the high water allocation in bytes */
+local void mem_high(z_stream *strm, char *prefix)
+{
+ struct mem_zone *zone = strm->opaque;
+
+ fprintf(stderr, "%s: %lu high water mark\n", prefix, zone->highwater);
+}
+
+/* release the memory allocation zone -- if there are any surprises, notify */
+local void mem_done(z_stream *strm, char *prefix)
+{
+ int count = 0;
+ struct mem_item *item, *next;
+ struct mem_zone *zone = strm->opaque;
+
+ /* show high water mark */
+ mem_high(strm, prefix);
+
+ /* free leftover allocations and item structures, if any */
+ item = zone->first;
+ while (item != NULL) {
+ free(item->ptr);
+ next = item->next;
+ free(item);
+ item = next;
+ count++;
+ }
+
+ /* issue alerts about anything unexpected */
+ if (count || zone->total)
+ fprintf(stderr, "** %s: %lu bytes in %d blocks not freed\n",
+ prefix, zone->total, count);
+ if (zone->notlifo)
+ fprintf(stderr, "** %s: %d frees not LIFO\n", prefix, zone->notlifo);
+ if (zone->rogue)
+ fprintf(stderr, "** %s: %d frees not recognized\n",
+ prefix, zone->rogue);
+
+ /* free the zone and delete from the stream */
+ free(zone);
+ strm->opaque = Z_NULL;
+ strm->zalloc = Z_NULL;
+ strm->zfree = Z_NULL;
+}
+
+/* -- inflate test routines -- */
+
+/* Decode a hexadecimal string, set *len to length, in[] to the bytes. This
+ decodes liberally, in that hex digits can be adjacent, in which case two in
+ a row writes a byte. Or they can be delimited by any non-hex character,
+ where the delimiters are ignored except when a single hex digit is followed
+ by a delimiter, where that single digit writes a byte. The returned data is
+ allocated and must eventually be freed. NULL is returned if out of memory.
+ If the length is not needed, then len can be NULL. */
+local unsigned char *h2b(const char *hex, unsigned *len)
+{
+ unsigned char *in, *re;
+ unsigned next, val;
+
+ in = malloc((strlen(hex) + 1) >> 1);
+ if (in == NULL)
+ return NULL;
+ next = 0;
+ val = 1;
+ do {
+ if (*hex >= '0' && *hex <= '9')
+ val = (val << 4) + *hex - '0';
+ else if (*hex >= 'A' && *hex <= 'F')
+ val = (val << 4) + *hex - 'A' + 10;
+ else if (*hex >= 'a' && *hex <= 'f')
+ val = (val << 4) + *hex - 'a' + 10;
+ else if (val != 1 && val < 32) /* one digit followed by delimiter */
+ val += 240; /* make it look like two digits */
+ if (val > 255) { /* have two digits */
+ in[next++] = val & 0xff; /* save the decoded byte */
+ val = 1; /* start over */
+ }
+ } while (*hex++); /* go through the loop with the terminating null */
+ if (len != NULL)
+ *len = next;
+ re = realloc(in, next);
+ return re == NULL ? in : re;
+}
+
+/* generic inflate() run, where hex is the hexadecimal input data, what is the
+ text to include in an error message, step is how much input data to feed
+ inflate() on each call, or zero to feed it all, win is the window bits
+ parameter to inflateInit2(), len is the size of the output buffer, and err
+ is the error code expected from the first inflate() call (the second
+ inflate() call is expected to return Z_STREAM_END). If win is 47, then
+ header information is collected with inflateGetHeader(). If a zlib stream
+ is looking for a dictionary, then an empty dictionary is provided.
+ inflate() is run until all of the input data is consumed. */
+local void inf(char *hex, char *what, unsigned step, int win, unsigned len,
+ int err)
+{
+ int ret;
+ unsigned have;
+ unsigned char *in, *out;
+ z_stream strm, copy;
+ gz_header head;
+
+ mem_setup(&strm);
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit2(&strm, win);
+ if (ret != Z_OK) {
+ mem_done(&strm, what);
+ return;
+ }
+ out = malloc(len); assert(out != NULL);
+ if (win == 47) {
+ head.extra = out;
+ head.extra_max = len;
+ head.name = out;
+ head.name_max = len;
+ head.comment = out;
+ head.comm_max = len;
+ ret = inflateGetHeader(&strm, &head); assert(ret == Z_OK);
+ }
+ in = h2b(hex, &have); assert(in != NULL);
+ if (step == 0 || step > have)
+ step = have;
+ strm.avail_in = step;
+ have -= step;
+ strm.next_in = in;
+ do {
+ strm.avail_out = len;
+ strm.next_out = out;
+ ret = inflate(&strm, Z_NO_FLUSH); assert(err == 9 || ret == err);
+ if (ret != Z_OK && ret != Z_BUF_ERROR && ret != Z_NEED_DICT)
+ break;
+ if (ret == Z_NEED_DICT) {
+ ret = inflateSetDictionary(&strm, in, 1);
+ assert(ret == Z_DATA_ERROR);
+ mem_limit(&strm, 1);
+ ret = inflateSetDictionary(&strm, out, 0);
+ assert(ret == Z_MEM_ERROR);
+ mem_limit(&strm, 0);
+ ((struct inflate_state *)strm.state)->mode = DICT;
+ ret = inflateSetDictionary(&strm, out, 0);
+ assert(ret == Z_OK);
+ ret = inflate(&strm, Z_NO_FLUSH); assert(ret == Z_BUF_ERROR);
+ }
+ ret = inflateCopy(©, &strm); assert(ret == Z_OK);
+ ret = inflateEnd(©); assert(ret == Z_OK);
+ err = 9; /* don't care next time around */
+ have += strm.avail_in;
+ strm.avail_in = step > have ? have : step;
+ have -= strm.avail_in;
+ } while (strm.avail_in);
+ free(in);
+ free(out);
+ ret = inflateReset2(&strm, -8); assert(ret == Z_OK);
+ ret = inflateEnd(&strm); assert(ret == Z_OK);
+ mem_done(&strm, what);
+}
+
+/* cover all of the lines in inflate.c up to inflate() */
+local void cover_support(void)
+{
+ int ret;
+ z_stream strm;
+
+ mem_setup(&strm);
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit(&strm); assert(ret == Z_OK);
+ mem_used(&strm, "inflate init");
+ ret = inflatePrime(&strm, 5, 31); assert(ret == Z_OK);
+ ret = inflatePrime(&strm, -1, 0); assert(ret == Z_OK);
+ ret = inflateSetDictionary(&strm, Z_NULL, 0);
+ assert(ret == Z_STREAM_ERROR);
+ ret = inflateEnd(&strm); assert(ret == Z_OK);
+ mem_done(&strm, "prime");
+
+ inf("63 0", "force window allocation", 0, -15, 1, Z_OK);
+ inf("63 18 5", "force window replacement", 0, -8, 259, Z_OK);
+ inf("63 18 68 30 d0 0 0", "force split window update", 4, -8, 259, Z_OK);
+ inf("3 0", "use fixed blocks", 0, -15, 1, Z_STREAM_END);
+ inf("", "bad window size", 0, 1, 0, Z_STREAM_ERROR);
+
+ mem_setup(&strm);
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit_(&strm, ZLIB_VERSION - 1, (int)sizeof(z_stream));
+ assert(ret == Z_VERSION_ERROR);
+ mem_done(&strm, "wrong version");
+
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit(&strm); assert(ret == Z_OK);
+ ret = inflateEnd(&strm); assert(ret == Z_OK);
+ fputs("inflate built-in memory routines\n", stderr);
+}
+
+/* cover all inflate() header and trailer cases and code after inflate() */
+local void cover_wrap(void)
+{
+ int ret;
+ z_stream strm, copy;
+ unsigned char dict[257];
+
+ ret = inflate(Z_NULL, 0); assert(ret == Z_STREAM_ERROR);
+ ret = inflateEnd(Z_NULL); assert(ret == Z_STREAM_ERROR);
+ ret = inflateCopy(Z_NULL, Z_NULL); assert(ret == Z_STREAM_ERROR);
+ fputs("inflate bad parameters\n", stderr);
+
+ inf("1f 8b 0 0", "bad gzip method", 0, 31, 0, Z_DATA_ERROR);
+ inf("1f 8b 8 80", "bad gzip flags", 0, 31, 0, Z_DATA_ERROR);
+ inf("77 85", "bad zlib method", 0, 15, 0, Z_DATA_ERROR);
+ inf("8 99", "set window size from header", 0, 0, 0, Z_OK);
+ inf("78 9c", "bad zlib window size", 0, 8, 0, Z_DATA_ERROR);
+ inf("78 9c 63 0 0 0 1 0 1", "check adler32", 0, 15, 1, Z_STREAM_END);
+ inf("1f 8b 8 1e 0 0 0 0 0 0 1 0 0 0 0 0 0", "bad header crc", 0, 47, 1,
+ Z_DATA_ERROR);
+ inf("1f 8b 8 2 0 0 0 0 0 0 1d 26 3 0 0 0 0 0 0 0 0 0", "check gzip length",
+ 0, 47, 0, Z_STREAM_END);
+ inf("78 90", "bad zlib header check", 0, 47, 0, Z_DATA_ERROR);
+ inf("8 b8 0 0 0 1", "need dictionary", 0, 8, 0, Z_NEED_DICT);
+ inf("78 9c 63 0", "compute adler32", 0, 15, 1, Z_OK);
+
+ mem_setup(&strm);
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit2(&strm, -8);
+ strm.avail_in = 2;
+ strm.next_in = (void *)"\x63";
+ strm.avail_out = 1;
+ strm.next_out = (void *)&ret;
+ mem_limit(&strm, 1);
+ ret = inflate(&strm, Z_NO_FLUSH); assert(ret == Z_MEM_ERROR);
+ ret = inflate(&strm, Z_NO_FLUSH); assert(ret == Z_MEM_ERROR);
+ mem_limit(&strm, 0);
+ memset(dict, 0, 257);
+ ret = inflateSetDictionary(&strm, dict, 257);
+ assert(ret == Z_OK);
+ mem_limit(&strm, (sizeof(struct inflate_state) << 1) + 256);
+ ret = inflatePrime(&strm, 16, 0); assert(ret == Z_OK);
+ strm.avail_in = 2;
+ strm.next_in = (void *)"\x80";
+ ret = inflateSync(&strm); assert(ret == Z_DATA_ERROR);
+ ret = inflate(&strm, Z_NO_FLUSH); assert(ret == Z_STREAM_ERROR);
+ strm.avail_in = 4;
+ strm.next_in = (void *)"\0\0\xff\xff";
+ ret = inflateSync(&strm); assert(ret == Z_OK);
+ (void)inflateSyncPoint(&strm);
+ ret = inflateCopy(©, &strm); assert(ret == Z_MEM_ERROR);
+ mem_limit(&strm, 0);
+ ret = inflateUndermine(&strm, 1); assert(ret == Z_DATA_ERROR);
+ (void)inflateMark(&strm);
+ ret = inflateEnd(&strm); assert(ret == Z_OK);
+ mem_done(&strm, "miscellaneous, force memory errors");
+}
+
+/* input and output functions for inflateBack() */
+local unsigned pull(void *desc, unsigned char **buf)
+{
+ static unsigned int next = 0;
+ static unsigned char dat[] = {0x63, 0, 2, 0};
+ struct inflate_state *state;
+
+ if (desc == Z_NULL) {
+ next = 0;
+ return 0; /* no input (already provided at next_in) */
+ }
+ state = (void *)((z_stream *)desc)->state;
+ if (state != Z_NULL)
+ state->mode = SYNC; /* force an otherwise impossible situation */
+ return next < sizeof(dat) ? (*buf = dat + next++, 1) : 0;
+}
+
+local int push(void *desc, unsigned char *buf, unsigned len)
+{
+ buf += len;
+ return desc != Z_NULL; /* force error if desc not null */
+}
+
+/* cover inflateBack() up to common deflate data cases and after those */
+local void cover_back(void)
+{
+ int ret;
+ z_stream strm;
+ unsigned char win[32768];
+
+ ret = inflateBackInit_(Z_NULL, 0, win, 0, 0);
+ assert(ret == Z_VERSION_ERROR);
+ ret = inflateBackInit(Z_NULL, 0, win); assert(ret == Z_STREAM_ERROR);
+ ret = inflateBack(Z_NULL, Z_NULL, Z_NULL, Z_NULL, Z_NULL);
+ assert(ret == Z_STREAM_ERROR);
+ ret = inflateBackEnd(Z_NULL); assert(ret == Z_STREAM_ERROR);
+ fputs("inflateBack bad parameters\n", stderr);
+
+ mem_setup(&strm);
+ ret = inflateBackInit(&strm, 15, win); assert(ret == Z_OK);
+ strm.avail_in = 2;
+ strm.next_in = (void *)"\x03";
+ ret = inflateBack(&strm, pull, Z_NULL, push, Z_NULL);
+ assert(ret == Z_STREAM_END);
+ /* force output error */
+ strm.avail_in = 3;
+ strm.next_in = (void *)"\x63\x00";
+ ret = inflateBack(&strm, pull, Z_NULL, push, &strm);
+ assert(ret == Z_BUF_ERROR);
+ /* force mode error by mucking with state */
+ ret = inflateBack(&strm, pull, &strm, push, Z_NULL);
+ assert(ret == Z_STREAM_ERROR);
+ ret = inflateBackEnd(&strm); assert(ret == Z_OK);
+ mem_done(&strm, "inflateBack bad state");
+
+ ret = inflateBackInit(&strm, 15, win); assert(ret == Z_OK);
+ ret = inflateBackEnd(&strm); assert(ret == Z_OK);
+ fputs("inflateBack built-in memory routines\n", stderr);
+}
+
+/* do a raw inflate of data in hexadecimal with both inflate and inflateBack */
+local int try(char *hex, char *id, int err)
+{
+ int ret;
+ unsigned len, size;
+ unsigned char *in, *out, *win;
+ char *prefix;
+ z_stream strm;
+
+ /* convert to hex */
+ in = h2b(hex, &len);
+ assert(in != NULL);
+
+ /* allocate work areas */
+ size = len << 3;
+ out = malloc(size);
+ assert(out != NULL);
+ win = malloc(32768);
+ assert(win != NULL);
+ prefix = malloc(strlen(id) + 6);
+ assert(prefix != NULL);
+
+ /* first with inflate */
+ strcpy(prefix, id);
+ strcat(prefix, "-late");
+ mem_setup(&strm);
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit2(&strm, err < 0 ? 47 : -15);
+ assert(ret == Z_OK);
+ strm.avail_in = len;
+ strm.next_in = in;
+ do {
+ strm.avail_out = size;
+ strm.next_out = out;
+ ret = inflate(&strm, Z_TREES);
+ assert(ret != Z_STREAM_ERROR && ret != Z_MEM_ERROR);
+ if (ret == Z_DATA_ERROR || ret == Z_NEED_DICT)
+ break;
+ } while (strm.avail_in || strm.avail_out == 0);
+ if (err) {
+ assert(ret == Z_DATA_ERROR);
+ assert(strcmp(id, strm.msg) == 0);
+ }
+ inflateEnd(&strm);
+ mem_done(&strm, prefix);
+
+ /* then with inflateBack */
+ if (err >= 0) {
+ strcpy(prefix, id);
+ strcat(prefix, "-back");
+ mem_setup(&strm);
+ ret = inflateBackInit(&strm, 15, win);
+ assert(ret == Z_OK);
+ strm.avail_in = len;
+ strm.next_in = in;
+ ret = inflateBack(&strm, pull, Z_NULL, push, Z_NULL);
+ assert(ret != Z_STREAM_ERROR);
+ if (err) {
+ assert(ret == Z_DATA_ERROR);
+ assert(strcmp(id, strm.msg) == 0);
+ }
+ inflateBackEnd(&strm);
+ mem_done(&strm, prefix);
+ }
+
+ /* clean up */
+ free(prefix);
+ free(win);
+ free(out);
+ free(in);
+ return ret;
+}
+
+/* cover deflate data cases in both inflate() and inflateBack() */
+local void cover_inflate(void)
+{
+ try("0 0 0 0 0", "invalid stored block lengths", 1);
+ try("3 0", "fixed", 0);
+ try("6", "invalid block type", 1);
+ try("1 1 0 fe ff 0", "stored", 0);
+ try("fc 0 0", "too many length or distance symbols", 1);
+ try("4 0 fe ff", "invalid code lengths set", 1);
+ try("4 0 24 49 0", "invalid bit length repeat", 1);
+ try("4 0 24 e9 ff ff", "invalid bit length repeat", 1);
+ try("4 0 24 e9 ff 6d", "invalid code -- missing end-of-block", 1);
+ try("4 80 49 92 24 49 92 24 71 ff ff 93 11 0",
+ "invalid literal/lengths set", 1);
+ try("4 80 49 92 24 49 92 24 f b4 ff ff c3 84", "invalid distances set", 1);
+ try("4 c0 81 8 0 0 0 0 20 7f eb b 0 0", "invalid literal/length code", 1);
+ try("2 7e ff ff", "invalid distance code", 1);
+ try("c c0 81 0 0 0 0 0 90 ff 6b 4 0", "invalid distance too far back", 1);
+
+ /* also trailer mismatch just in inflate() */
+ try("1f 8b 8 0 0 0 0 0 0 0 3 0 0 0 0 1", "incorrect data check", -1);
+ try("1f 8b 8 0 0 0 0 0 0 0 3 0 0 0 0 0 0 0 0 1",
+ "incorrect length check", -1);
+ try("5 c0 21 d 0 0 0 80 b0 fe 6d 2f 91 6c", "pull 17", 0);
+ try("5 e0 81 91 24 cb b2 2c 49 e2 f 2e 8b 9a 47 56 9f fb fe ec d2 ff 1f",
+ "long code", 0);
+ try("ed c0 1 1 0 0 0 40 20 ff 57 1b 42 2c 4f", "length extra", 0);
+ try("ed cf c1 b1 2c 47 10 c4 30 fa 6f 35 1d 1 82 59 3d fb be 2e 2a fc f c",
+ "long distance and extra", 0);
+ try("ed c0 81 0 0 0 0 80 a0 fd a9 17 a9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 "
+ "0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 6", "window end", 0);
+ inf("2 8 20 80 0 3 0", "inflate_fast TYPE return", 0, -15, 258,
+ Z_STREAM_END);
+ inf("63 18 5 40 c 0", "window wrap", 3, -8, 300, Z_OK);
+}
+
+/* cover remaining lines in inftrees.c */
+local void cover_trees(void)
+{
+ int ret;
+ unsigned bits;
+ unsigned short lens[16], work[16];
+ code *next, table[ENOUGH_DISTS];
+
+ /* we need to call inflate_table() directly in order to manifest not-
+ enough errors, since zlib insures that enough is always enough */
+ for (bits = 0; bits < 15; bits++)
+ lens[bits] = (unsigned short)(bits + 1);
+ lens[15] = 15;
+ next = table;
+ bits = 15;
+ ret = inflate_table(DISTS, lens, 16, &next, &bits, work);
+ assert(ret == 1);
+ next = table;
+ bits = 1;
+ ret = inflate_table(DISTS, lens, 16, &next, &bits, work);
+ assert(ret == 1);
+ fputs("inflate_table not enough errors\n", stderr);
+}
+
+/* cover remaining inffast.c decoding and window copying */
+local void cover_fast(void)
+{
+ inf("e5 e0 81 ad 6d cb b2 2c c9 01 1e 59 63 ae 7d ee fb 4d fd b5 35 41 68"
+ " ff 7f 0f 0 0 0", "fast length extra bits", 0, -8, 258, Z_DATA_ERROR);
+ inf("25 fd 81 b5 6d 59 b6 6a 49 ea af 35 6 34 eb 8c b9 f6 b9 1e ef 67 49"
+ " 50 fe ff ff 3f 0 0", "fast distance extra bits", 0, -8, 258,
+ Z_DATA_ERROR);
+ inf("3 7e 0 0 0 0 0", "fast invalid distance code", 0, -8, 258,
+ Z_DATA_ERROR);
+ inf("1b 7 0 0 0 0 0", "fast invalid literal/length code", 0, -8, 258,
+ Z_DATA_ERROR);
+ inf("d c7 1 ae eb 38 c 4 41 a0 87 72 de df fb 1f b8 36 b1 38 5d ff ff 0",
+ "fast 2nd level codes and too far back", 0, -8, 258, Z_DATA_ERROR);
+ inf("63 18 5 8c 10 8 0 0 0 0", "very common case", 0, -8, 259, Z_OK);
+ inf("63 60 60 18 c9 0 8 18 18 18 26 c0 28 0 29 0 0 0",
+ "contiguous and wrap around window", 6, -8, 259, Z_OK);
+ inf("63 0 3 0 0 0 0 0", "copy direct from output", 0, -8, 259,
+ Z_STREAM_END);
+}
+
+int main(void)
+{
+ fprintf(stderr, "%s\n", zlibVersion());
+ cover_support();
+ cover_wrap();
+ cover_back();
+ cover_inflate();
+ cover_trees();
+ cover_fast();
+ return 0;
+}
--- /dev/null
+/* minigzip.c -- simulate gzip using the zlib compression library
+ * Copyright (C) 1995-2006, 2010, 2011, 2016 Jean-loup Gailly
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * minigzip is a minimal implementation of the gzip utility. This is
+ * only an example of using zlib and isn't meant to replace the
+ * full-featured gzip. No attempt is made to deal with file systems
+ * limiting names to 14 or 8+3 characters, etc... Error checking is
+ * very limited. So use minigzip only for testing; use gzip for the
+ * real thing. On MSDOS, use only on file names without extension
+ * or in pipe mode.
+ */
+
+/* @(#) $Id: minigzip.c,v 1.1.1.1 2022/03/24 19:41:06 bluhm Exp $ */
+
+#include "zlib.h"
+#include <stdio.h>
+
+#ifdef STDC
+# include <string.h>
+# include <stdlib.h>
+#endif
+
+#ifdef USE_MMAP
+# include <sys/types.h>
+# include <sys/mman.h>
+# include <sys/stat.h>
+#endif
+
+#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
+# include <fcntl.h>
+# include <io.h>
+# ifdef UNDER_CE
+# include <stdlib.h>
+# endif
+# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+# define SET_BINARY_MODE(file)
+#endif
+
+#if defined(_MSC_VER) && _MSC_VER < 1900
+# define snprintf _snprintf
+#endif
+
+#ifdef VMS
+# define unlink delete
+# define GZ_SUFFIX "-gz"
+#endif
+#ifdef RISCOS
+# define unlink remove
+# define GZ_SUFFIX "-gz"
+# define fileno(file) file->__file
+#endif
+#if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
+# include <unix.h> /* for fileno */
+#endif
+
+#if !defined(Z_HAVE_UNISTD_H) && !defined(_LARGEFILE64_SOURCE)
+#ifndef WIN32 /* unlink already in stdio.h for WIN32 */
+ extern int unlink OF((const char *));
+#endif
+#endif
+
+#if defined(UNDER_CE)
+# include <windows.h>
+# define perror(s) pwinerror(s)
+
+/* Map the Windows error number in ERROR to a locale-dependent error
+ message string and return a pointer to it. Typically, the values
+ for ERROR come from GetLastError.
+
+ The string pointed to shall not be modified by the application,
+ but may be overwritten by a subsequent call to strwinerror
+
+ The strwinerror function does not change the current setting
+ of GetLastError. */
+
+static char *strwinerror (error)
+ DWORD error;
+{
+ static char buf[1024];
+
+ wchar_t *msgbuf;
+ DWORD lasterr = GetLastError();
+ DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM
+ | FORMAT_MESSAGE_ALLOCATE_BUFFER,
+ NULL,
+ error,
+ 0, /* Default language */
+ (LPVOID)&msgbuf,
+ 0,
+ NULL);
+ if (chars != 0) {
+ /* If there is an \r\n appended, zap it. */
+ if (chars >= 2
+ && msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') {
+ chars -= 2;
+ msgbuf[chars] = 0;
+ }
+
+ if (chars > sizeof (buf) - 1) {
+ chars = sizeof (buf) - 1;
+ msgbuf[chars] = 0;
+ }
+
+ wcstombs(buf, msgbuf, chars + 1);
+ LocalFree(msgbuf);
+ }
+ else {
+ sprintf(buf, "unknown win32 error (%ld)", error);
+ }
+
+ SetLastError(lasterr);
+ return buf;
+}
+
+static void pwinerror (s)
+ const char *s;
+{
+ if (s && *s)
+ fprintf(stderr, "%s: %s\n", s, strwinerror(GetLastError ()));
+ else
+ fprintf(stderr, "%s\n", strwinerror(GetLastError ()));
+}
+
+#endif /* UNDER_CE */
+
+#ifndef GZ_SUFFIX
+# define GZ_SUFFIX ".gz"
+#endif
+#define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1)
+
+#define BUFLEN 16384
+#define MAX_NAME_LEN 1024
+
+#ifdef MAXSEG_64K
+# define local static
+ /* Needed for systems with limitation on stack size. */
+#else
+# define local
+#endif
+
+#ifdef Z_SOLO
+/* for Z_SOLO, create simplified gz* functions using deflate and inflate */
+
+#if defined(Z_HAVE_UNISTD_H) || defined(Z_LARGE)
+# include <unistd.h> /* for unlink() */
+#endif
+
+void *myalloc OF((void *, unsigned, unsigned));
+void myfree OF((void *, void *));
+
+void *myalloc(q, n, m)
+ void *q;
+ unsigned n, m;
+{
+ (void)q;
+ return calloc(n, m);
+}
+
+void myfree(q, p)
+ void *q, *p;
+{
+ (void)q;
+ free(p);
+}
+
+typedef struct gzFile_s {
+ FILE *file;
+ int write;
+ int err;
+ char *msg;
+ z_stream strm;
+} *gzFile;
+
+gzFile gzopen OF((const char *, const char *));
+gzFile gzdopen OF((int, const char *));
+gzFile gz_open OF((const char *, int, const char *));
+
+gzFile gzopen(path, mode)
+const char *path;
+const char *mode;
+{
+ return gz_open(path, -1, mode);
+}
+
+gzFile gzdopen(fd, mode)
+int fd;
+const char *mode;
+{
+ return gz_open(NULL, fd, mode);
+}
+
+gzFile gz_open(path, fd, mode)
+ const char *path;
+ int fd;
+ const char *mode;
+{
+ gzFile gz;
+ int ret;
+
+ gz = malloc(sizeof(struct gzFile_s));
+ if (gz == NULL)
+ return NULL;
+ gz->write = strchr(mode, 'w') != NULL;
+ gz->strm.zalloc = myalloc;
+ gz->strm.zfree = myfree;
+ gz->strm.opaque = Z_NULL;
+ if (gz->write)
+ ret = deflateInit2(&(gz->strm), -1, 8, 15 + 16, 8, 0);
+ else {
+ gz->strm.next_in = 0;
+ gz->strm.avail_in = Z_NULL;
+ ret = inflateInit2(&(gz->strm), 15 + 16);
+ }
+ if (ret != Z_OK) {
+ free(gz);
+ return NULL;
+ }
+ gz->file = path == NULL ? fdopen(fd, gz->write ? "wb" : "rb") :
+ fopen(path, gz->write ? "wb" : "rb");
+ if (gz->file == NULL) {
+ gz->write ? deflateEnd(&(gz->strm)) : inflateEnd(&(gz->strm));
+ free(gz);
+ return NULL;
+ }
+ gz->err = 0;
+ gz->msg = "";
+ return gz;
+}
+
+int gzwrite OF((gzFile, const void *, unsigned));
+
+int gzwrite(gz, buf, len)
+ gzFile gz;
+ const void *buf;
+ unsigned len;
+{
+ z_stream *strm;
+ unsigned char out[BUFLEN];
+
+ if (gz == NULL || !gz->write)
+ return 0;
+ strm = &(gz->strm);
+ strm->next_in = (void *)buf;
+ strm->avail_in = len;
+ do {
+ strm->next_out = out;
+ strm->avail_out = BUFLEN;
+ (void)deflate(strm, Z_NO_FLUSH);
+ fwrite(out, 1, BUFLEN - strm->avail_out, gz->file);
+ } while (strm->avail_out == 0);
+ return len;
+}
+
+int gzread OF((gzFile, void *, unsigned));
+
+int gzread(gz, buf, len)
+ gzFile gz;
+ void *buf;
+ unsigned len;
+{
+ int ret;
+ unsigned got;
+ unsigned char in[1];
+ z_stream *strm;
+
+ if (gz == NULL || gz->write)
+ return 0;
+ if (gz->err)
+ return 0;
+ strm = &(gz->strm);
+ strm->next_out = (void *)buf;
+ strm->avail_out = len;
+ do {
+ got = fread(in, 1, 1, gz->file);
+ if (got == 0)
+ break;
+ strm->next_in = in;
+ strm->avail_in = 1;
+ ret = inflate(strm, Z_NO_FLUSH);
+ if (ret == Z_DATA_ERROR) {
+ gz->err = Z_DATA_ERROR;
+ gz->msg = strm->msg;
+ return 0;
+ }
+ if (ret == Z_STREAM_END)
+ inflateReset(strm);
+ } while (strm->avail_out);
+ return len - strm->avail_out;
+}
+
+int gzclose OF((gzFile));
+
+int gzclose(gz)
+ gzFile gz;
+{
+ z_stream *strm;
+ unsigned char out[BUFLEN];
+
+ if (gz == NULL)
+ return Z_STREAM_ERROR;
+ strm = &(gz->strm);
+ if (gz->write) {
+ strm->next_in = Z_NULL;
+ strm->avail_in = 0;
+ do {
+ strm->next_out = out;
+ strm->avail_out = BUFLEN;
+ (void)deflate(strm, Z_FINISH);
+ fwrite(out, 1, BUFLEN - strm->avail_out, gz->file);
+ } while (strm->avail_out == 0);
+ deflateEnd(strm);
+ }
+ else
+ inflateEnd(strm);
+ fclose(gz->file);
+ free(gz);
+ return Z_OK;
+}
+
+const char *gzerror OF((gzFile, int *));
+
+const char *gzerror(gz, err)
+ gzFile gz;
+ int *err;
+{
+ *err = gz->err;
+ return gz->msg;
+}
+
+#endif
+
+static char *prog;
+
+void error OF((const char *msg));
+void gz_compress OF((FILE *in, gzFile out));
+#ifdef USE_MMAP
+int gz_compress_mmap OF((FILE *in, gzFile out));
+#endif
+void gz_uncompress OF((gzFile in, FILE *out));
+void file_compress OF((char *file, char *mode));
+void file_uncompress OF((char *file));
+int main OF((int argc, char *argv[]));
+
+/* ===========================================================================
+ * Display error message and exit
+ */
+void error(msg)
+ const char *msg;
+{
+ fprintf(stderr, "%s: %s\n", prog, msg);
+ exit(1);
+}
+
+/* ===========================================================================
+ * Compress input to output then close both files.
+ */
+
+void gz_compress(in, out)
+ FILE *in;
+ gzFile out;
+{
+ local char buf[BUFLEN];
+ int len;
+ int err;
+
+#ifdef USE_MMAP
+ /* Try first compressing with mmap. If mmap fails (minigzip used in a
+ * pipe), use the normal fread loop.
+ */
+ if (gz_compress_mmap(in, out) == Z_OK) return;
+#endif
+ for (;;) {
+ len = (int)fread(buf, 1, sizeof(buf), in);
+ if (ferror(in)) {
+ perror("fread");
+ exit(1);
+ }
+ if (len == 0) break;
+
+ if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err));
+ }
+ fclose(in);
+ if (gzclose(out) != Z_OK) error("failed gzclose");
+}
+
+#ifdef USE_MMAP /* MMAP version, Miguel Albrecht <malbrech@eso.org> */
+
+/* Try compressing the input file at once using mmap. Return Z_OK if
+ * if success, Z_ERRNO otherwise.
+ */
+int gz_compress_mmap(in, out)
+ FILE *in;
+ gzFile out;
+{
+ int len;
+ int err;
+ int ifd = fileno(in);
+ caddr_t buf; /* mmap'ed buffer for the entire input file */
+ off_t buf_len; /* length of the input file */
+ struct stat sb;
+
+ /* Determine the size of the file, needed for mmap: */
+ if (fstat(ifd, &sb) < 0) return Z_ERRNO;
+ buf_len = sb.st_size;
+ if (buf_len <= 0) return Z_ERRNO;
+
+ /* Now do the actual mmap: */
+ buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0);
+ if (buf == (caddr_t)(-1)) return Z_ERRNO;
+
+ /* Compress the whole file at once: */
+ len = gzwrite(out, (char *)buf, (unsigned)buf_len);
+
+ if (len != (int)buf_len) error(gzerror(out, &err));
+
+ munmap(buf, buf_len);
+ fclose(in);
+ if (gzclose(out) != Z_OK) error("failed gzclose");
+ return Z_OK;
+}
+#endif /* USE_MMAP */
+
+/* ===========================================================================
+ * Uncompress input to output then close both files.
+ */
+void gz_uncompress(in, out)
+ gzFile in;
+ FILE *out;
+{
+ local char buf[BUFLEN];
+ int len;
+ int err;
+
+ for (;;) {
+ len = gzread(in, buf, sizeof(buf));
+ if (len < 0) error (gzerror(in, &err));
+ if (len == 0) break;
+
+ if ((int)fwrite(buf, 1, (unsigned)len, out) != len) {
+ error("failed fwrite");
+ }
+ }
+ if (fclose(out)) error("failed fclose");
+
+ if (gzclose(in) != Z_OK) error("failed gzclose");
+}
+
+
+/* ===========================================================================
+ * Compress the given file: create a corresponding .gz file and remove the
+ * original.
+ */
+void file_compress(file, mode)
+ char *file;
+ char *mode;
+{
+ local char outfile[MAX_NAME_LEN];
+ FILE *in;
+ gzFile out;
+
+ if (strlen(file) + strlen(GZ_SUFFIX) >= sizeof(outfile)) {
+ fprintf(stderr, "%s: filename too long\n", prog);
+ exit(1);
+ }
+
+#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
+ snprintf(outfile, sizeof(outfile), "%s%s", file, GZ_SUFFIX);
+#else
+ strcpy(outfile, file);
+ strcat(outfile, GZ_SUFFIX);
+#endif
+
+ in = fopen(file, "rb");
+ if (in == NULL) {
+ perror(file);
+ exit(1);
+ }
+ out = gzopen(outfile, mode);
+ if (out == NULL) {
+ fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile);
+ exit(1);
+ }
+ gz_compress(in, out);
+
+ unlink(file);
+}
+
+
+/* ===========================================================================
+ * Uncompress the given file and remove the original.
+ */
+void file_uncompress(file)
+ char *file;
+{
+ local char buf[MAX_NAME_LEN];
+ char *infile, *outfile;
+ FILE *out;
+ gzFile in;
+ unsigned len = strlen(file);
+
+ if (len + strlen(GZ_SUFFIX) >= sizeof(buf)) {
+ fprintf(stderr, "%s: filename too long\n", prog);
+ exit(1);
+ }
+
+#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
+ snprintf(buf, sizeof(buf), "%s", file);
+#else
+ strcpy(buf, file);
+#endif
+
+ if (len > SUFFIX_LEN && strcmp(file+len-SUFFIX_LEN, GZ_SUFFIX) == 0) {
+ infile = file;
+ outfile = buf;
+ outfile[len-3] = '\0';
+ } else {
+ outfile = file;
+ infile = buf;
+#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
+ snprintf(buf + len, sizeof(buf) - len, "%s", GZ_SUFFIX);
+#else
+ strcat(infile, GZ_SUFFIX);
+#endif
+ }
+ in = gzopen(infile, "rb");
+ if (in == NULL) {
+ fprintf(stderr, "%s: can't gzopen %s\n", prog, infile);
+ exit(1);
+ }
+ out = fopen(outfile, "wb");
+ if (out == NULL) {
+ perror(file);
+ exit(1);
+ }
+
+ gz_uncompress(in, out);
+
+ unlink(infile);
+}
+
+
+/* ===========================================================================
+ * Usage: minigzip [-c] [-d] [-f] [-h] [-r] [-1 to -9] [files...]
+ * -c : write to standard output
+ * -d : decompress
+ * -f : compress with Z_FILTERED
+ * -h : compress with Z_HUFFMAN_ONLY
+ * -r : compress with Z_RLE
+ * -1 to -9 : compression level
+ */
+
+int main(argc, argv)
+ int argc;
+ char *argv[];
+{
+ int copyout = 0;
+ int uncompr = 0;
+ gzFile file;
+ char *bname, outmode[20];
+
+#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
+ snprintf(outmode, sizeof(outmode), "%s", "wb6 ");
+#else
+ strcpy(outmode, "wb6 ");
+#endif
+
+ prog = argv[0];
+ bname = strrchr(argv[0], '/');
+ if (bname)
+ bname++;
+ else
+ bname = argv[0];
+ argc--, argv++;
+
+ if (!strcmp(bname, "gunzip"))
+ uncompr = 1;
+ else if (!strcmp(bname, "zcat"))
+ copyout = uncompr = 1;
+
+ while (argc > 0) {
+ if (strcmp(*argv, "-c") == 0)
+ copyout = 1;
+ else if (strcmp(*argv, "-d") == 0)
+ uncompr = 1;
+ else if (strcmp(*argv, "-f") == 0)
+ outmode[3] = 'f';
+ else if (strcmp(*argv, "-h") == 0)
+ outmode[3] = 'h';
+ else if (strcmp(*argv, "-r") == 0)
+ outmode[3] = 'R';
+ else if ((*argv)[0] == '-' && (*argv)[1] >= '1' && (*argv)[1] <= '9' &&
+ (*argv)[2] == 0)
+ outmode[2] = (*argv)[1];
+ else
+ break;
+ argc--, argv++;
+ }
+ if (outmode[3] == ' ')
+ outmode[3] = 0;
+ if (argc == 0) {
+ SET_BINARY_MODE(stdin);
+ SET_BINARY_MODE(stdout);
+ if (uncompr) {
+ file = gzdopen(fileno(stdin), "rb");
+ if (file == NULL) error("can't gzdopen stdin");
+ gz_uncompress(file, stdout);
+ } else {
+ file = gzdopen(fileno(stdout), outmode);
+ if (file == NULL) error("can't gzdopen stdout");
+ gz_compress(stdin, file);
+ }
+ } else {
+ if (copyout) {
+ SET_BINARY_MODE(stdout);
+ }
+ do {
+ if (uncompr) {
+ if (copyout) {
+ file = gzopen(*argv, "rb");
+ if (file == NULL)
+ fprintf(stderr, "%s: can't gzopen %s\n", prog, *argv);
+ else
+ gz_uncompress(file, stdout);
+ } else {
+ file_uncompress(*argv);
+ }
+ } else {
+ if (copyout) {
+ FILE * in = fopen(*argv, "rb");
+
+ if (in == NULL) {
+ perror(*argv);
+ } else {
+ file = gzdopen(fileno(stdout), outmode);
+ if (file == NULL) error("can't gzdopen stdout");
+
+ gz_compress(in, file);
+ }
+
+ } else {
+ file_compress(*argv, outmode);
+ }
+ }
+ } while (argv++, --argc);
+ }
+ return 0;
+}
projects / openbsd / commitdiff