+++ /dev/null
-/* $OpenBSD: scanio.h,v 1.7 1997/04/15 10:51:33 tholo Exp $ */
-/* $NetBSD: scanio.h,v 1.1 1996/02/18 20:33:18 mycroft Exp $ */
-
-/*
- * Copyright (c) 1995 Kenneth Stailey. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * This product includes software developed by Kenneth Stailey.
- * 4. The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/*
- * Definitions for PINT scanner drivers
- */
-
-#ifndef _SYS_SCANIO_H
-#define _SYS_SCANIO_H
-
-/*
- * Some comments about the values in the scan_io struct:
- *
- * All user-changeable values have minimum and maximum values for
- * specific scanner types and are rejected by the special drivers if
- * they are not in range. For values in the range, the driver selects
- * the next physically possible setting for the particular scanner.
- * So it is good practice to issue a SCIOCGET after a SCIOCSET to see
- * what the driver has chosen.
- *
- * Brightness and contrast default to 100 (%) but scanners may support
- * higher and/or lower values, though the maximum value is 255.
- * velocity is the scan speed and defaults to 100 (%), only slower
- * values may be possible.
- */
-
-struct scan_io {
- u_long scan_width; /* width in 1/1200ths of an inch */
- u_long scan_height; /* height in 1/1200ths of an inch */
- u_short scan_x_resolution; /* horizontal resolution in dots-per-inch */
- u_short scan_y_resolution; /* vertical resolution in dots-per-inch */
- u_long scan_x_origin; /* horizontal coordinate of upper left corner */
- u_long scan_y_origin; /* vertical coordinate of upper left corner */
- u_char scan_image_mode; /* type of image data sent by scanner */
- u_char scan_brightness; /* brightness control for those to can do it */
- u_char scan_contrast; /* contrast control for those to can do it */
- u_char scan_quality; /* speed of scan for instance */
- u_long scan_window_size; /* size of window in bytes (ro) */
- u_long scan_lines; /* number of pixels per column (ro) */
- u_long scan_pixels_per_line; /* number of pixels per line (ro) */
- u_short scan_bits_per_pixel; /* number of bits per pixel (ro) */
- u_char scan_scanner_type; /* type of scanner (ro) */
-};
-
-/*
- * defines for different commands
- */
-
-#define SCIOCGET _IOR('S', 1, struct scan_io) /* retrieve parameters */
-#define SCIOCSET _IOW('S', 2, struct scan_io) /* set parameters */
-#define SCIOCRESTART _IO('S', 3) /* restart scan */
-#define SCIOC_USE_ADF _IO('S', 4) /* use ADF as paper source for next scan */
- /* even after close() */
-/*
- * defines for scan_image_mode field
- */
-
-#define SIM_BINARY_MONOCHROME 0
-#define SIM_DITHERED_MONOCHROME 1
-#define SIM_GRAYSCALE 2
-#define SIM_COLOR 5
-#define SIM_RED 103
-#define SIM_GREEN 104
-#define SIM_BLUE 105
-
-/*
- * defines for different types of scanners & product names as comments
- */
-
-#define RICOH_IS410 1 /* Ricoh IS-410 */
-#define FUJITSU_M3096G 2 /* Fujitsu M3096G */
-#define HP_SCANJET_IIC 3 /* HP SCL scanners (ScanJet IIc, IIcx, ...) */
-#define RICOH_FS1 4 /* Ricoh FS1 */
-#define SHARP_JX600 5 /* Sharp JX600 */
-#define RICOH_IS50 6 /* Ricoh IS-50 */
-#define IBM_2456 7 /* IBM 2456 */
-#define UMAX_UC630 8 /* UMAX UC630 */
-#define UMAX_UG630 9 /* UMAX UG630 */
-#define MUSTEK_06000CX 10 /* Mustek MFS06000CX */
-#define MUSTEK_12000CX 11 /* Mustek MFS12000CX */
-#define EPSON_ES300C 12 /* epson es300c */
-#define GENERIC_SCSI2 13 /* good luck 8c{)] */
-#define ULTIMA_AC6000C 14 /* Ultima A6000C */
-#define ULTIMA_AT3 15 /* Ultima AT3 */
-
-#endif /* _SYS_SCANIO_H */