from ragge; Change to be more consistent with device naming

diff --git a/share/man/man4/man4.vax/mtio.4 b/share/man/man4/man4.vax/mtio.4
index 032539e..adb77b5 100644 (file)
--- a/share/man/man4/man4.vax/mtio.4
+++ b/share/man/man4/man4.vax/mtio.4
@@ -1,3 +1,4 @@
+.\"    $NetBSD: mtio.4,v 1.3 1996/01/07 20:11:35 ragge Exp $
 .\" Copyright (c) 1983, 1991 The Regents of the University of California.
 .\" All rights reserved.
 .\"
@@ -30,75 +31,69 @@
 .\" SUCH DAMAGE.
 .\"
 .\"     from: @(#)mtio.4       6.5 (Berkeley) 3/27/91
-.\"    $Id: mtio.4,v 1.1.1.1 1995/10/18 08:44:35 deraadt Exp $
 .\"
-.Dd March 27, 1991
+.Dd January 7, 1996
 .Dt MTIO 4 vax
-.Os BSD 4.2
+.Os
 .Sh NAME
 .Nm mtio
 .Nd
-.Tn UNIX
+.Tn NetBSD
 magtape interface
 .Sh DESCRIPTION
-The special files
-named
-.Pa /dev/mt0
-and
-.Pa /dev/rmt0
-through
-.Pa /dev/mt23
-and
-.Pa /dev/rmt23
-refer to
-.Tn UNIX
-magtape drives,
-which may be on the
+Each tape subsystem has a couple of special devices associated with it.
+The magtape devices may be on the
 .Tn MASSBUS
 using the
 .Tn TM03
-formatter
+formatter,
 .Xr ht 4 ,
 or
 .Tn TM78
 formatter,
 .Xr mt 4 ,
 or on the
-.Tn UNIBUS
+.Tn UNIBUS/QBUS
 using either the
 .Tn TM11
 or
-.Tn TS11
-formatters
+.Tn TE10
+formatters,
 .Xr tm 4 ,
 .Tn TU45
 compatible formatters,
 .Xr ut 4 ,
 or
+.Tn TS11/TSV05
+tape formatters,
 .Xr ts 4 .
 These devices are typical tape block devices,
 see
 .Xr physio 4 .
 .Pp
-The following table of the converntional device names
+The conventional device letters/numbers
 is applicable to any of the transport/controller pairs.
 (But note that only 1600
 .Tn BPI
 is available with the
-.Tn TS11 . )
-.Bl -column "no-rewindxxx" "or lowest densityxx" "or lowest densityxx" "or lowest densityxx" -offset indent
-             800 BPI         1600 BPI        6500 BPI
-.Em    or lowest density       or second density       or third density
-
-Rewind      mt0/rmt0         mt8/rmt8         mt16/rmt16
-Rewind      mt1/rmt1         mt9/rmt9         mt17/rmt17
-Rewind      mt2/rmt2         mt10/rmt10               mt18/rmt18
-Rewind      mt3/rmt3         mt11/rmt11               mt19/rmt19
-No-rewind          nmt4/nrmt4      nmt12/nrmt12            nmt20/nrmt20
-No-rewind          nmt5/nrmt5      nmt13/nrmt13            nmt21/nrmt21
-No-rewind          nmt6/nrmt6      nmt14/nrmt14            nmt22/nrmt22
-No-rewind          nmt7/nrmt7      nmt15/nrmt15            nmt23/nrmt32
-.El
+.Tn TS11 ,
+and that 800
+.Tn BPI
+is not applicable to
+.Tn TM78 . )
+.Pp
+When the device last number is between
+.Em 0-7
+the device will operate at 800
+.Tn BPI
+(or its lowest density), between 
+.Em 8-15
+it will operate at 1600
+.Tn BPI
+(or its second density), and between
+.Em 16-23
+it will operate at 6250
+.Tn BPI .
 .Pp
 The rewind devices automatically rewind
 when the last requested read, write or seek has finished, or the end of the tape
@@ -230,6 +225,3 @@ manual appeared in
 .Bx 4.2 .
 .Sh BUGS
 The status should be returned in a device independent format.
-.Pp
-The special file naming should be redone in a more consistent and
-understandable manner.