-# $OpenBSD: Makefile,v 1.23 2017/09/12 08:43:14 mpi Exp $
+# $OpenBSD: Makefile,v 1.24 2018/02/08 13:51:08 mpi Exp $
RDOMAIN?= 5
${RCMD} show -inet 2>&1 | \
diff -u ${.CURDIR}/${.TARGET}.ok /dev/stdin
+# Check that next-hop L2 cache are cloned using the correct MPATH route
+n= 32
+RTTEST_TARGETS+:=rttest${n}
+rttest${n}:
+ # Use vether(4) and vlan(4) because we need IFT_ETHER interfaces
+ # for the auto-magic RTF_CLONING routes.
+ ${SUDO} ifconfig vether99 rdomain ${RDOMAIN} lladdr fe:e1:ba:d4:c8:1d up
+ ${SUDO} ifconfig vether99 130.102.71.68/27
+ ${SUDO} ifconfig vlan99 rdomain ${RDOMAIN} parent vether99 vnetid 3 up
+ ${SUDO} ifconfig vlan99 130.102.71.70/27
+ # Inserting such route generate the insertion of a RTF_CLONED entry
+ # attached to the specified interface
+ ${RCMD} add -net 192.168.67.0/25 130.102.71.67 -priority 9 -ifp vether99
+ ${RCMD} add -net 192.168.67.128/25 130.102.71.67 -priority 3 -ifp vlan99
+ ${RCMD} show -inet 2>&1 | \
+ sed -e "s,link\#[0-9 ]*U,link# U," | \
+ cat > ${.CURDIR}/${.TARGET}.ok
+ ${SUDO} ifconfig vlan99 destroy
+ ${SUDO} ifconfig vether99 destroy
+
REGRESS_TARGETS=netmask ${RTTEST_TARGETS}
REGRESS_ROOT_TARGETS=${REGRESS_TARGETS}
.PHONY: ${REGRESS_TARGETS}
--- /dev/null
+Routing tables
+
+Internet:
+Destination Gateway Flags Refs Use Mtu Prio Iface
+130.102.71.64/27 130.102.71.68 UCPn 1 1 - 4 vether99
+130.102.71.64/27 130.102.71.70 UCPn 1 0 - 4 vlan99
+130.102.71.67 link# UHLchP 1 3 - 3 vether99
+130.102.71.67 link# UHLchP 1 0 - 3 vlan99
+130.102.71.68 fe:e1:ba:d4:c8:1d UHLl 0 0 - 1 vether99
+130.102.71.70 fe:e1:ba:d4:c8:1d UHLl 0 0 - 1 vlan99
+130.102.71.95 130.102.71.68 UHPb 0 0 - 1 vether99
+130.102.71.95 130.102.71.70 UHPb 0 0 - 1 vlan99
+192.0.2.1 192.0.2.1 UHl 0 0 32768 1 lo10001
+192.0.2.2 192.0.2.2 UHl 0 0 32768 1 lo10002
+192.0.2.3 192.0.2.3 UHl 0 0 32768 1 lo10003
+192.0.2.4 192.0.2.4 UHl 0 0 32768 1 lo10004
+192.168.67.0/25 130.102.71.67 UGS 0 0 - 9 vether99
+192.168.67.128/25 130.102.71.67 UGS 0 0 - 3 vlan99